mirror of https://gitee.com/openkylin/linux.git
507 lines
21 KiB
C
507 lines
21 KiB
C
/*
|
|
* Definitions for Xilinx Axi Ethernet device driver.
|
|
*
|
|
* Copyright (c) 2009 Secret Lab Technologies, Ltd.
|
|
* Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
|
|
*/
|
|
|
|
#ifndef XILINX_AXIENET_H
|
|
#define XILINX_AXIENET_H
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
/* Packet size info */
|
|
#define XAE_HDR_SIZE 14 /* Size of Ethernet header */
|
|
#define XAE_HDR_VLAN_SIZE 18 /* Size of an Ethernet hdr + VLAN */
|
|
#define XAE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */
|
|
#define XAE_MTU 1500 /* Max MTU of an Ethernet frame */
|
|
#define XAE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */
|
|
|
|
#define XAE_MAX_FRAME_SIZE (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
|
|
#define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE)
|
|
#define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE)
|
|
|
|
/* Configuration options */
|
|
|
|
/* Accept all incoming packets. Default: disabled (cleared) */
|
|
#define XAE_OPTION_PROMISC (1 << 0)
|
|
|
|
/* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */
|
|
#define XAE_OPTION_JUMBO (1 << 1)
|
|
|
|
/* VLAN Rx & Tx frame support. Default: disabled (cleared) */
|
|
#define XAE_OPTION_VLAN (1 << 2)
|
|
|
|
/* Enable recognition of flow control frames on Rx. Default: enabled (set) */
|
|
#define XAE_OPTION_FLOW_CONTROL (1 << 4)
|
|
|
|
/* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not
|
|
* stripped. Default: disabled (set) */
|
|
#define XAE_OPTION_FCS_STRIP (1 << 5)
|
|
|
|
/* Generate FCS field and add PAD automatically for outgoing frames.
|
|
* Default: enabled (set) */
|
|
#define XAE_OPTION_FCS_INSERT (1 << 6)
|
|
|
|
/* Enable Length/Type error checking for incoming frames. When this option is
|
|
* set, the MAC will filter frames that have a mismatched type/length field
|
|
* and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these
|
|
* types of frames are encountered. When this option is cleared, the MAC will
|
|
* allow these types of frames to be received. Default: enabled (set) */
|
|
#define XAE_OPTION_LENTYPE_ERR (1 << 7)
|
|
|
|
/* Enable the transmitter. Default: enabled (set) */
|
|
#define XAE_OPTION_TXEN (1 << 11)
|
|
|
|
/* Enable the receiver. Default: enabled (set) */
|
|
#define XAE_OPTION_RXEN (1 << 12)
|
|
|
|
/* Default options set when device is initialized or reset */
|
|
#define XAE_OPTION_DEFAULTS \
|
|
(XAE_OPTION_TXEN | \
|
|
XAE_OPTION_FLOW_CONTROL | \
|
|
XAE_OPTION_RXEN)
|
|
|
|
/* Axi DMA Register definitions */
|
|
|
|
#define XAXIDMA_TX_CR_OFFSET 0x00000000 /* Channel control */
|
|
#define XAXIDMA_TX_SR_OFFSET 0x00000004 /* Status */
|
|
#define XAXIDMA_TX_CDESC_OFFSET 0x00000008 /* Current descriptor pointer */
|
|
#define XAXIDMA_TX_TDESC_OFFSET 0x00000010 /* Tail descriptor pointer */
|
|
|
|
#define XAXIDMA_RX_CR_OFFSET 0x00000030 /* Channel control */
|
|
#define XAXIDMA_RX_SR_OFFSET 0x00000034 /* Status */
|
|
#define XAXIDMA_RX_CDESC_OFFSET 0x00000038 /* Current descriptor pointer */
|
|
#define XAXIDMA_RX_TDESC_OFFSET 0x00000040 /* Tail descriptor pointer */
|
|
|
|
#define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */
|
|
#define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */
|
|
|
|
#define XAXIDMA_BD_NDESC_OFFSET 0x00 /* Next descriptor pointer */
|
|
#define XAXIDMA_BD_BUFA_OFFSET 0x08 /* Buffer address */
|
|
#define XAXIDMA_BD_CTRL_LEN_OFFSET 0x18 /* Control/buffer length */
|
|
#define XAXIDMA_BD_STS_OFFSET 0x1C /* Status */
|
|
#define XAXIDMA_BD_USR0_OFFSET 0x20 /* User IP specific word0 */
|
|
#define XAXIDMA_BD_USR1_OFFSET 0x24 /* User IP specific word1 */
|
|
#define XAXIDMA_BD_USR2_OFFSET 0x28 /* User IP specific word2 */
|
|
#define XAXIDMA_BD_USR3_OFFSET 0x2C /* User IP specific word3 */
|
|
#define XAXIDMA_BD_USR4_OFFSET 0x30 /* User IP specific word4 */
|
|
#define XAXIDMA_BD_ID_OFFSET 0x34 /* Sw ID */
|
|
#define XAXIDMA_BD_HAS_STSCNTRL_OFFSET 0x38 /* Whether has stscntrl strm */
|
|
#define XAXIDMA_BD_HAS_DRE_OFFSET 0x3C /* Whether has DRE */
|
|
|
|
#define XAXIDMA_BD_HAS_DRE_SHIFT 8 /* Whether has DRE shift */
|
|
#define XAXIDMA_BD_HAS_DRE_MASK 0xF00 /* Whether has DRE mask */
|
|
#define XAXIDMA_BD_WORDLEN_MASK 0xFF /* Whether has DRE mask */
|
|
|
|
#define XAXIDMA_BD_CTRL_LENGTH_MASK 0x007FFFFF /* Requested len */
|
|
#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */
|
|
#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */
|
|
#define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */
|
|
|
|
#define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */
|
|
#define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */
|
|
|
|
#define XAXIDMA_DELAY_SHIFT 24
|
|
#define XAXIDMA_COALESCE_SHIFT 16
|
|
|
|
#define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */
|
|
#define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */
|
|
#define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */
|
|
#define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */
|
|
|
|
/* Default TX/RX Threshold and waitbound values for SGDMA mode */
|
|
#define XAXIDMA_DFT_TX_THRESHOLD 24
|
|
#define XAXIDMA_DFT_TX_WAITBOUND 254
|
|
#define XAXIDMA_DFT_RX_THRESHOLD 24
|
|
#define XAXIDMA_DFT_RX_WAITBOUND 254
|
|
|
|
#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */
|
|
#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */
|
|
#define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */
|
|
|
|
#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */
|
|
#define XAXIDMA_BD_STS_COMPLETE_MASK 0x80000000 /* Completed */
|
|
#define XAXIDMA_BD_STS_DEC_ERR_MASK 0x40000000 /* Decode error */
|
|
#define XAXIDMA_BD_STS_SLV_ERR_MASK 0x20000000 /* Slave error */
|
|
#define XAXIDMA_BD_STS_INT_ERR_MASK 0x10000000 /* Internal err */
|
|
#define XAXIDMA_BD_STS_ALL_ERR_MASK 0x70000000 /* All errors */
|
|
#define XAXIDMA_BD_STS_RXSOF_MASK 0x08000000 /* First rx pkt */
|
|
#define XAXIDMA_BD_STS_RXEOF_MASK 0x04000000 /* Last rx pkt */
|
|
#define XAXIDMA_BD_STS_ALL_MASK 0xFC000000 /* All status bits */
|
|
|
|
#define XAXIDMA_BD_MINIMUM_ALIGNMENT 0x40
|
|
|
|
/* Axi Ethernet registers definition */
|
|
#define XAE_RAF_OFFSET 0x00000000 /* Reset and Address filter */
|
|
#define XAE_TPF_OFFSET 0x00000004 /* Tx Pause Frame */
|
|
#define XAE_IFGP_OFFSET 0x00000008 /* Tx Inter-frame gap adjustment*/
|
|
#define XAE_IS_OFFSET 0x0000000C /* Interrupt status */
|
|
#define XAE_IP_OFFSET 0x00000010 /* Interrupt pending */
|
|
#define XAE_IE_OFFSET 0x00000014 /* Interrupt enable */
|
|
#define XAE_TTAG_OFFSET 0x00000018 /* Tx VLAN TAG */
|
|
#define XAE_RTAG_OFFSET 0x0000001C /* Rx VLAN TAG */
|
|
#define XAE_UAWL_OFFSET 0x00000020 /* Unicast address word lower */
|
|
#define XAE_UAWU_OFFSET 0x00000024 /* Unicast address word upper */
|
|
#define XAE_TPID0_OFFSET 0x00000028 /* VLAN TPID0 register */
|
|
#define XAE_TPID1_OFFSET 0x0000002C /* VLAN TPID1 register */
|
|
#define XAE_PPST_OFFSET 0x00000030 /* PCS PMA Soft Temac Status Reg */
|
|
#define XAE_RCW0_OFFSET 0x00000400 /* Rx Configuration Word 0 */
|
|
#define XAE_RCW1_OFFSET 0x00000404 /* Rx Configuration Word 1 */
|
|
#define XAE_TC_OFFSET 0x00000408 /* Tx Configuration */
|
|
#define XAE_FCC_OFFSET 0x0000040C /* Flow Control Configuration */
|
|
#define XAE_EMMC_OFFSET 0x00000410 /* EMAC mode configuration */
|
|
#define XAE_PHYC_OFFSET 0x00000414 /* RGMII/SGMII configuration */
|
|
#define XAE_MDIO_MC_OFFSET 0x00000500 /* MII Management Config */
|
|
#define XAE_MDIO_MCR_OFFSET 0x00000504 /* MII Management Control */
|
|
#define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */
|
|
#define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */
|
|
#define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */
|
|
#define XAE_MDIO_MIP_OFFSET 0x00000620 /* MII Mgmt Interrupt Pending
|
|
* register offset */
|
|
#define XAE_MDIO_MIE_OFFSET 0x00000640 /* MII Management Interrupt Enable
|
|
* register offset */
|
|
#define XAE_MDIO_MIC_OFFSET 0x00000660 /* MII Management Interrupt Clear
|
|
* register offset. */
|
|
#define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */
|
|
#define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */
|
|
#define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */
|
|
#define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */
|
|
#define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */
|
|
|
|
#define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */
|
|
#define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */
|
|
#define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */
|
|
|
|
/* Bit Masks for Axi Ethernet RAF register */
|
|
#define XAE_RAF_MCSTREJ_MASK 0x00000002 /* Reject receive multicast
|
|
* destination address */
|
|
#define XAE_RAF_BCSTREJ_MASK 0x00000004 /* Reject receive broadcast
|
|
* destination address */
|
|
#define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */
|
|
#define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */
|
|
#define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */
|
|
#define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */
|
|
#define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */
|
|
#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 /* Exteneded Multicast
|
|
* Filtering mode
|
|
*/
|
|
#define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */
|
|
#define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */
|
|
#define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */
|
|
#define XAE_RAF_RXVTAGMODE_SHIFT 5 /* Rx Tag mode shift bits */
|
|
#define XAE_RAF_TXVSTRPMODE_SHIFT 7 /* Tx strip mode shift bits*/
|
|
#define XAE_RAF_RXVSTRPMODE_SHIFT 9 /* Rx Strip mode shift bits*/
|
|
|
|
/* Bit Masks for Axi Ethernet TPF and IFGP registers */
|
|
#define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */
|
|
#define XAE_IFGP0_IFGP_MASK 0x0000007F /* Transmit inter-frame
|
|
* gap adjustment value */
|
|
|
|
/* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply
|
|
* for all 3 registers. */
|
|
#define XAE_INT_HARDACSCMPLT_MASK 0x00000001 /* Hard register access
|
|
* complete */
|
|
#define XAE_INT_AUTONEG_MASK 0x00000002 /* Auto negotiation
|
|
* complete */
|
|
#define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */
|
|
#define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */
|
|
#define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */
|
|
#define XAE_INT_TXCMPIT_MASK 0x00000020 /* Tx complete */
|
|
#define XAE_INT_RXDCMLOCK_MASK 0x00000040 /* Rx Dcm Lock */
|
|
#define XAE_INT_MGTRDY_MASK 0x00000080 /* MGT clock Lock */
|
|
#define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */
|
|
#define XAE_INT_ALL_MASK 0x0000003F /* All the ints */
|
|
|
|
#define XAE_INT_RECV_ERROR_MASK \
|
|
(XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that
|
|
* indicate receive
|
|
* errors */
|
|
|
|
/* Bit masks for Axi Ethernet VLAN TPID Word 0 register */
|
|
#define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */
|
|
#define XAE_TPID_1_MASK 0xFFFF0000 /* TPID 1 */
|
|
|
|
/* Bit masks for Axi Ethernet VLAN TPID Word 1 register */
|
|
#define XAE_TPID_2_MASK 0x0000FFFF /* TPID 0 */
|
|
#define XAE_TPID_3_MASK 0xFFFF0000 /* TPID 1 */
|
|
|
|
/* Bit masks for Axi Ethernet RCW1 register */
|
|
#define XAE_RCW1_RST_MASK 0x80000000 /* Reset */
|
|
#define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */
|
|
#define XAE_RCW1_FCS_MASK 0x20000000 /* In-Band FCS enable
|
|
* (FCS not stripped) */
|
|
#define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */
|
|
#define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */
|
|
#define XAE_RCW1_LT_DIS_MASK 0x02000000 /* Length/type field valid check
|
|
* disable */
|
|
#define XAE_RCW1_CL_DIS_MASK 0x01000000 /* Control frame Length check
|
|
* disable */
|
|
#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address
|
|
* bits [47:32]. Bits [31:0] are
|
|
* stored in register RCW0 */
|
|
|
|
/* Bit masks for Axi Ethernet TC register */
|
|
#define XAE_TC_RST_MASK 0x80000000 /* Reset */
|
|
#define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */
|
|
#define XAE_TC_FCS_MASK 0x20000000 /* In-Band FCS enable
|
|
* (FCS not generated) */
|
|
#define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */
|
|
#define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */
|
|
#define XAE_TC_IFG_MASK 0x02000000 /* Inter-frame gap adjustment
|
|
* enable */
|
|
|
|
/* Bit masks for Axi Ethernet FCC register */
|
|
#define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */
|
|
#define XAE_FCC_FCTX_MASK 0x40000000 /* Tx flow control enable */
|
|
|
|
/* Bit masks for Axi Ethernet EMMC register */
|
|
#define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */
|
|
#define XAE_EMMC_RGMII_MASK 0x20000000 /* RGMII mode enable */
|
|
#define XAE_EMMC_SGMII_MASK 0x10000000 /* SGMII mode enable */
|
|
#define XAE_EMMC_GPCS_MASK 0x08000000 /* 1000BaseX mode enable */
|
|
#define XAE_EMMC_HOST_MASK 0x04000000 /* Host interface enable */
|
|
#define XAE_EMMC_TX16BIT 0x02000000 /* 16 bit Tx client enable */
|
|
#define XAE_EMMC_RX16BIT 0x01000000 /* 16 bit Rx client enable */
|
|
#define XAE_EMMC_LINKSPD_10 0x00000000 /* Link Speed mask for 10 Mbit */
|
|
#define XAE_EMMC_LINKSPD_100 0x40000000 /* Link Speed mask for 100 Mbit */
|
|
#define XAE_EMMC_LINKSPD_1000 0x80000000 /* Link Speed mask for 1000 Mbit */
|
|
|
|
/* Bit masks for Axi Ethernet PHYC register */
|
|
#define XAE_PHYC_SGMIILINKSPEED_MASK 0xC0000000 /* SGMII link speed mask*/
|
|
#define XAE_PHYC_RGMIILINKSPEED_MASK 0x0000000C /* RGMII link speed */
|
|
#define XAE_PHYC_RGMIIHD_MASK 0x00000002 /* RGMII Half-duplex */
|
|
#define XAE_PHYC_RGMIILINK_MASK 0x00000001 /* RGMII link status */
|
|
#define XAE_PHYC_RGLINKSPD_10 0x00000000 /* RGMII link 10 Mbit */
|
|
#define XAE_PHYC_RGLINKSPD_100 0x00000004 /* RGMII link 100 Mbit */
|
|
#define XAE_PHYC_RGLINKSPD_1000 0x00000008 /* RGMII link 1000 Mbit */
|
|
#define XAE_PHYC_SGLINKSPD_10 0x00000000 /* SGMII link 10 Mbit */
|
|
#define XAE_PHYC_SGLINKSPD_100 0x40000000 /* SGMII link 100 Mbit */
|
|
#define XAE_PHYC_SGLINKSPD_1000 0x80000000 /* SGMII link 1000 Mbit */
|
|
|
|
/* Bit masks for Axi Ethernet MDIO interface MC register */
|
|
#define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable */
|
|
#define XAE_MDIO_MC_CLOCK_DIVIDE_MAX 0x3F /* Maximum MDIO divisor */
|
|
|
|
/* Bit masks for Axi Ethernet MDIO interface MCR register */
|
|
#define XAE_MDIO_MCR_PHYAD_MASK 0x1F000000 /* Phy Address Mask */
|
|
#define XAE_MDIO_MCR_PHYAD_SHIFT 24 /* Phy Address Shift */
|
|
#define XAE_MDIO_MCR_REGAD_MASK 0x001F0000 /* Reg Address Mask */
|
|
#define XAE_MDIO_MCR_REGAD_SHIFT 16 /* Reg Address Shift */
|
|
#define XAE_MDIO_MCR_OP_MASK 0x0000C000 /* Operation Code Mask */
|
|
#define XAE_MDIO_MCR_OP_SHIFT 13 /* Operation Code Shift */
|
|
#define XAE_MDIO_MCR_OP_READ_MASK 0x00008000 /* Op Code Read Mask */
|
|
#define XAE_MDIO_MCR_OP_WRITE_MASK 0x00004000 /* Op Code Write Mask */
|
|
#define XAE_MDIO_MCR_INITIATE_MASK 0x00000800 /* Ready Mask */
|
|
#define XAE_MDIO_MCR_READY_MASK 0x00000080 /* Ready Mask */
|
|
|
|
/* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */
|
|
#define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */
|
|
|
|
/* Bit masks for Axi Ethernet UAW1 register */
|
|
#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF /* Station address bits
|
|
* [47:32]; Station address
|
|
* bits [31:0] are stored in
|
|
* register UAW0 */
|
|
|
|
/* Bit masks for Axi Ethernet FMI register */
|
|
#define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */
|
|
#define XAE_FMI_IND_MASK 0x00000003 /* Index Mask */
|
|
|
|
#define XAE_MDIO_DIV_DFT 29 /* Default MDIO clock divisor */
|
|
|
|
/* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */
|
|
#define XAE_PHY_TYPE_MII 0
|
|
#define XAE_PHY_TYPE_GMII 1
|
|
#define XAE_PHY_TYPE_RGMII_1_3 2
|
|
#define XAE_PHY_TYPE_RGMII_2_0 3
|
|
#define XAE_PHY_TYPE_SGMII 4
|
|
#define XAE_PHY_TYPE_1000BASE_X 5
|
|
|
|
#define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Total number of entries in the
|
|
* hardware multicast table. */
|
|
|
|
/* Axi Ethernet Synthesis features */
|
|
#define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0)
|
|
#define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1)
|
|
#define XAE_FEATURE_FULL_RX_CSUM (1 << 2)
|
|
#define XAE_FEATURE_FULL_TX_CSUM (1 << 3)
|
|
|
|
#define XAE_NO_CSUM_OFFLOAD 0
|
|
|
|
#define XAE_FULL_CSUM_STATUS_MASK 0x00000038
|
|
#define XAE_IP_UDP_CSUM_VALIDATED 0x00000003
|
|
#define XAE_IP_TCP_CSUM_VALIDATED 0x00000002
|
|
|
|
#define DELAY_OF_ONE_MILLISEC 1000
|
|
|
|
/**
|
|
* struct axidma_bd - Axi Dma buffer descriptor layout
|
|
* @next: MM2S/S2MM Next Descriptor Pointer
|
|
* @reserved1: Reserved and not used
|
|
* @phys: MM2S/S2MM Buffer Address
|
|
* @reserved2: Reserved and not used
|
|
* @reserved3: Reserved and not used
|
|
* @reserved4: Reserved and not used
|
|
* @cntrl: MM2S/S2MM Control value
|
|
* @status: MM2S/S2MM Status value
|
|
* @app0: MM2S/S2MM User Application Field 0.
|
|
* @app1: MM2S/S2MM User Application Field 1.
|
|
* @app2: MM2S/S2MM User Application Field 2.
|
|
* @app3: MM2S/S2MM User Application Field 3.
|
|
* @app4: MM2S/S2MM User Application Field 4.
|
|
* @sw_id_offset: MM2S/S2MM Sw ID
|
|
* @reserved5: Reserved and not used
|
|
* @reserved6: Reserved and not used
|
|
*/
|
|
struct axidma_bd {
|
|
u32 next; /* Physical address of next buffer descriptor */
|
|
u32 reserved1;
|
|
u32 phys;
|
|
u32 reserved2;
|
|
u32 reserved3;
|
|
u32 reserved4;
|
|
u32 cntrl;
|
|
u32 status;
|
|
u32 app0;
|
|
u32 app1; /* TX start << 16 | insert */
|
|
u32 app2; /* TX csum seed */
|
|
u32 app3;
|
|
u32 app4;
|
|
u32 sw_id_offset;
|
|
u32 reserved5;
|
|
u32 reserved6;
|
|
};
|
|
|
|
/**
|
|
* struct axienet_local - axienet private per device data
|
|
* @ndev: Pointer for net_device to which it will be attached.
|
|
* @dev: Pointer to device structure
|
|
* @phy_dev: Pointer to PHY device structure attached to the axienet_local
|
|
* @phy_node: Pointer to device node structure
|
|
* @mii_bus: Pointer to MII bus structure
|
|
* @mdio_irqs: IRQs table for MDIO bus required in mii_bus structure
|
|
* @regs: Base address for the axienet_local device address space
|
|
* @dma_regs: Base address for the axidma device address space
|
|
* @dma_err_tasklet: Tasklet structure to process Axi DMA errors
|
|
* @tx_irq: Axidma TX IRQ number
|
|
* @rx_irq: Axidma RX IRQ number
|
|
* @temac_type: axienet type to identify between soft and hard temac
|
|
* @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X
|
|
* @options: AxiEthernet option word
|
|
* @last_link: Phy link state in which the PHY was negotiated earlier
|
|
* @features: Stores the extended features supported by the axienet hw
|
|
* @tx_bd_v: Virtual address of the TX buffer descriptor ring
|
|
* @tx_bd_p: Physical address(start address) of the TX buffer descr. ring
|
|
* @rx_bd_v: Virtual address of the RX buffer descriptor ring
|
|
* @rx_bd_p: Physical address(start address) of the RX buffer descr. ring
|
|
* @tx_bd_ci: Stores the index of the Tx buffer descriptor in the ring being
|
|
* accessed currently. Used while alloc. BDs before a TX starts
|
|
* @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being
|
|
* accessed currently. Used while processing BDs after the TX
|
|
* completed.
|
|
* @rx_bd_ci: Stores the index of the Rx buffer descriptor in the ring being
|
|
* accessed currently.
|
|
* @max_frm_size: Stores the maximum size of the frame that can be that
|
|
* Txed/Rxed in the existing hardware. If jumbo option is
|
|
* supported, the maximum frame size would be 9k. Else it is
|
|
* 1522 bytes (assuming support for basic VLAN)
|
|
* @jumbo_support: Stores hardware configuration for jumbo support. If hardware
|
|
* can handle jumbo packets, this entry will be 1, else 0.
|
|
*/
|
|
struct axienet_local {
|
|
struct net_device *ndev;
|
|
struct device *dev;
|
|
|
|
/* Connection to PHY device */
|
|
struct phy_device *phy_dev; /* Pointer to PHY device */
|
|
struct device_node *phy_node;
|
|
|
|
/* MDIO bus data */
|
|
struct mii_bus *mii_bus; /* MII bus reference */
|
|
int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */
|
|
|
|
/* IO registers, dma functions and IRQs */
|
|
void __iomem *regs;
|
|
void __iomem *dma_regs;
|
|
|
|
struct tasklet_struct dma_err_tasklet;
|
|
|
|
int tx_irq;
|
|
int rx_irq;
|
|
u32 temac_type;
|
|
u32 phy_type;
|
|
|
|
u32 options; /* Current options word */
|
|
u32 last_link;
|
|
u32 features;
|
|
|
|
/* Buffer descriptors */
|
|
struct axidma_bd *tx_bd_v;
|
|
dma_addr_t tx_bd_p;
|
|
struct axidma_bd *rx_bd_v;
|
|
dma_addr_t rx_bd_p;
|
|
u32 tx_bd_ci;
|
|
u32 tx_bd_tail;
|
|
u32 rx_bd_ci;
|
|
|
|
u32 max_frm_size;
|
|
u32 jumbo_support;
|
|
|
|
int csum_offload_on_tx_path;
|
|
int csum_offload_on_rx_path;
|
|
|
|
u32 coalesce_count_rx;
|
|
u32 coalesce_count_tx;
|
|
};
|
|
|
|
/**
|
|
* struct axiethernet_option - Used to set axi ethernet hardware options
|
|
* @opt: Option to be set.
|
|
* @reg: Register offset to be written for setting the option
|
|
* @m_or: Mask to be ORed for setting the option in the register
|
|
*/
|
|
struct axienet_option {
|
|
u32 opt;
|
|
u32 reg;
|
|
u32 m_or;
|
|
};
|
|
|
|
/**
|
|
* axienet_ior - Memory mapped Axi Ethernet register read
|
|
* @lp: Pointer to axienet local structure
|
|
* @offset: Address offset from the base address of Axi Ethernet core
|
|
*
|
|
* returns: The contents of the Axi Ethernet register
|
|
*
|
|
* This function returns the contents of the corresponding register.
|
|
*/
|
|
static inline u32 axienet_ior(struct axienet_local *lp, off_t offset)
|
|
{
|
|
return in_be32(lp->regs + offset);
|
|
}
|
|
|
|
/**
|
|
* axienet_iow - Memory mapped Axi Ethernet register write
|
|
* @lp: Pointer to axienet local structure
|
|
* @offset: Address offset from the base address of Axi Ethernet core
|
|
* @value: Value to be written into the Axi Ethernet register
|
|
*
|
|
* This function writes the desired value into the corresponding Axi Ethernet
|
|
* register.
|
|
*/
|
|
static inline void axienet_iow(struct axienet_local *lp, off_t offset,
|
|
u32 value)
|
|
{
|
|
out_be32((lp->regs + offset), value);
|
|
}
|
|
|
|
/* Function prototypes visible in xilinx_axienet_mdio.c for other files */
|
|
int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np);
|
|
int axienet_mdio_wait_until_ready(struct axienet_local *lp);
|
|
void axienet_mdio_teardown(struct axienet_local *lp);
|
|
|
|
#endif /* XILINX_AXI_ENET_H */
|