mirror of https://gitee.com/openkylin/linux.git
364 lines
9.0 KiB
C
364 lines
9.0 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for the Texas Instruments DP83TC811 PHY
|
|
*
|
|
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
*/
|
|
|
|
#include <linux/ethtool.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/netdevice.h>
|
|
|
|
#define DP83TC811_PHY_ID 0x2000a253
|
|
#define DP83811_DEVADDR 0x1f
|
|
|
|
#define MII_DP83811_SGMII_CTRL 0x09
|
|
#define MII_DP83811_INT_STAT1 0x12
|
|
#define MII_DP83811_INT_STAT2 0x13
|
|
#define MII_DP83811_INT_STAT3 0x18
|
|
#define MII_DP83811_RESET_CTRL 0x1f
|
|
|
|
#define DP83811_HW_RESET BIT(15)
|
|
#define DP83811_SW_RESET BIT(14)
|
|
|
|
/* INT_STAT1 bits */
|
|
#define DP83811_RX_ERR_HF_INT_EN BIT(0)
|
|
#define DP83811_MS_TRAINING_INT_EN BIT(1)
|
|
#define DP83811_ANEG_COMPLETE_INT_EN BIT(2)
|
|
#define DP83811_ESD_EVENT_INT_EN BIT(3)
|
|
#define DP83811_WOL_INT_EN BIT(4)
|
|
#define DP83811_LINK_STAT_INT_EN BIT(5)
|
|
#define DP83811_ENERGY_DET_INT_EN BIT(6)
|
|
#define DP83811_LINK_QUAL_INT_EN BIT(7)
|
|
|
|
/* INT_STAT2 bits */
|
|
#define DP83811_JABBER_DET_INT_EN BIT(0)
|
|
#define DP83811_POLARITY_INT_EN BIT(1)
|
|
#define DP83811_SLEEP_MODE_INT_EN BIT(2)
|
|
#define DP83811_OVERTEMP_INT_EN BIT(3)
|
|
#define DP83811_OVERVOLTAGE_INT_EN BIT(6)
|
|
#define DP83811_UNDERVOLTAGE_INT_EN BIT(7)
|
|
|
|
/* INT_STAT3 bits */
|
|
#define DP83811_LPS_INT_EN BIT(0)
|
|
#define DP83811_NO_FRAME_INT_EN BIT(3)
|
|
#define DP83811_POR_DONE_INT_EN BIT(4)
|
|
|
|
#define MII_DP83811_RXSOP1 0x04a5
|
|
#define MII_DP83811_RXSOP2 0x04a6
|
|
#define MII_DP83811_RXSOP3 0x04a7
|
|
|
|
/* WoL Registers */
|
|
#define MII_DP83811_WOL_CFG 0x04a0
|
|
#define MII_DP83811_WOL_STAT 0x04a1
|
|
#define MII_DP83811_WOL_DA1 0x04a2
|
|
#define MII_DP83811_WOL_DA2 0x04a3
|
|
#define MII_DP83811_WOL_DA3 0x04a4
|
|
|
|
/* WoL bits */
|
|
#define DP83811_WOL_MAGIC_EN BIT(0)
|
|
#define DP83811_WOL_SECURE_ON BIT(5)
|
|
#define DP83811_WOL_EN BIT(7)
|
|
#define DP83811_WOL_INDICATION_SEL BIT(8)
|
|
#define DP83811_WOL_CLR_INDICATION BIT(11)
|
|
|
|
/* SGMII CTRL bits */
|
|
#define DP83811_TDR_AUTO BIT(8)
|
|
#define DP83811_SGMII_EN BIT(12)
|
|
#define DP83811_SGMII_AUTO_NEG_EN BIT(13)
|
|
#define DP83811_SGMII_TX_ERR_DIS BIT(14)
|
|
#define DP83811_SGMII_SOFT_RESET BIT(15)
|
|
|
|
static int dp83811_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, MII_DP83811_INT_STAT1);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = phy_read(phydev, MII_DP83811_INT_STAT2);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = phy_read(phydev, MII_DP83811_INT_STAT3);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83811_set_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct net_device *ndev = phydev->attached_dev;
|
|
const u8 *mac;
|
|
u16 value;
|
|
|
|
if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
|
|
mac = (const u8 *)ndev->dev_addr;
|
|
|
|
if (!is_valid_ether_addr(mac))
|
|
return -EINVAL;
|
|
|
|
/* MAC addresses start with byte 5, but stored in mac[0].
|
|
* 811 PHYs store bytes 4|5, 2|3, 0|1
|
|
*/
|
|
phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA1,
|
|
(mac[1] << 8) | mac[0]);
|
|
phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA2,
|
|
(mac[3] << 8) | mac[2]);
|
|
phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_DA3,
|
|
(mac[5] << 8) | mac[4]);
|
|
|
|
value = phy_read_mmd(phydev, DP83811_DEVADDR,
|
|
MII_DP83811_WOL_CFG);
|
|
if (wol->wolopts & WAKE_MAGIC)
|
|
value |= DP83811_WOL_MAGIC_EN;
|
|
else
|
|
value &= ~DP83811_WOL_MAGIC_EN;
|
|
|
|
if (wol->wolopts & WAKE_MAGICSECURE) {
|
|
phy_write_mmd(phydev, DP83811_DEVADDR,
|
|
MII_DP83811_RXSOP1,
|
|
(wol->sopass[1] << 8) | wol->sopass[0]);
|
|
phy_write_mmd(phydev, DP83811_DEVADDR,
|
|
MII_DP83811_RXSOP2,
|
|
(wol->sopass[3] << 8) | wol->sopass[2]);
|
|
phy_write_mmd(phydev, DP83811_DEVADDR,
|
|
MII_DP83811_RXSOP3,
|
|
(wol->sopass[5] << 8) | wol->sopass[4]);
|
|
value |= DP83811_WOL_SECURE_ON;
|
|
} else {
|
|
value &= ~DP83811_WOL_SECURE_ON;
|
|
}
|
|
|
|
value |= (DP83811_WOL_EN | DP83811_WOL_INDICATION_SEL |
|
|
DP83811_WOL_CLR_INDICATION);
|
|
phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
|
|
value);
|
|
} else {
|
|
phy_clear_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
|
|
DP83811_WOL_EN);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dp83811_get_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
u16 sopass_val;
|
|
int value;
|
|
|
|
wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
|
|
wol->wolopts = 0;
|
|
|
|
value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
|
|
|
|
if (value & DP83811_WOL_MAGIC_EN)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
|
|
if (value & DP83811_WOL_SECURE_ON) {
|
|
sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
|
|
MII_DP83811_RXSOP1);
|
|
wol->sopass[0] = (sopass_val & 0xff);
|
|
wol->sopass[1] = (sopass_val >> 8);
|
|
|
|
sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
|
|
MII_DP83811_RXSOP2);
|
|
wol->sopass[2] = (sopass_val & 0xff);
|
|
wol->sopass[3] = (sopass_val >> 8);
|
|
|
|
sopass_val = phy_read_mmd(phydev, DP83811_DEVADDR,
|
|
MII_DP83811_RXSOP3);
|
|
wol->sopass[4] = (sopass_val & 0xff);
|
|
wol->sopass[5] = (sopass_val >> 8);
|
|
|
|
wol->wolopts |= WAKE_MAGICSECURE;
|
|
}
|
|
|
|
/* WoL is not enabled so set wolopts to 0 */
|
|
if (!(value & DP83811_WOL_EN))
|
|
wol->wolopts = 0;
|
|
}
|
|
|
|
static int dp83811_config_intr(struct phy_device *phydev)
|
|
{
|
|
int misr_status, err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
misr_status = phy_read(phydev, MII_DP83811_INT_STAT1);
|
|
if (misr_status < 0)
|
|
return misr_status;
|
|
|
|
misr_status |= (DP83811_RX_ERR_HF_INT_EN |
|
|
DP83811_MS_TRAINING_INT_EN |
|
|
DP83811_ANEG_COMPLETE_INT_EN |
|
|
DP83811_ESD_EVENT_INT_EN |
|
|
DP83811_WOL_INT_EN |
|
|
DP83811_LINK_STAT_INT_EN |
|
|
DP83811_ENERGY_DET_INT_EN |
|
|
DP83811_LINK_QUAL_INT_EN);
|
|
|
|
err = phy_write(phydev, MII_DP83811_INT_STAT1, misr_status);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
misr_status = phy_read(phydev, MII_DP83811_INT_STAT2);
|
|
if (misr_status < 0)
|
|
return misr_status;
|
|
|
|
misr_status |= (DP83811_JABBER_DET_INT_EN |
|
|
DP83811_POLARITY_INT_EN |
|
|
DP83811_SLEEP_MODE_INT_EN |
|
|
DP83811_OVERTEMP_INT_EN |
|
|
DP83811_OVERVOLTAGE_INT_EN |
|
|
DP83811_UNDERVOLTAGE_INT_EN);
|
|
|
|
err = phy_write(phydev, MII_DP83811_INT_STAT2, misr_status);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
misr_status = phy_read(phydev, MII_DP83811_INT_STAT3);
|
|
if (misr_status < 0)
|
|
return misr_status;
|
|
|
|
misr_status |= (DP83811_LPS_INT_EN |
|
|
DP83811_NO_FRAME_INT_EN |
|
|
DP83811_POR_DONE_INT_EN);
|
|
|
|
err = phy_write(phydev, MII_DP83811_INT_STAT3, misr_status);
|
|
|
|
} else {
|
|
err = phy_write(phydev, MII_DP83811_INT_STAT1, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = phy_write(phydev, MII_DP83811_INT_STAT2, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = phy_write(phydev, MII_DP83811_INT_STAT3, 0);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int dp83811_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int value, err;
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
|
|
if (phydev->autoneg == AUTONEG_ENABLE) {
|
|
err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
|
|
(DP83811_SGMII_AUTO_NEG_EN | value));
|
|
if (err < 0)
|
|
return err;
|
|
} else {
|
|
err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
|
|
(~DP83811_SGMII_AUTO_NEG_EN & value));
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int dp83811_config_init(struct phy_device *phydev)
|
|
{
|
|
int value, err;
|
|
|
|
err = genphy_config_init(phydev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
|
|
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
|
|
(DP83811_SGMII_EN | value));
|
|
} else {
|
|
err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
|
|
(~DP83811_SGMII_EN & value));
|
|
}
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
value = DP83811_WOL_MAGIC_EN | DP83811_WOL_SECURE_ON | DP83811_WOL_EN;
|
|
|
|
return phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
|
|
value);
|
|
}
|
|
|
|
static int dp83811_phy_reset(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_write(phydev, MII_DP83811_RESET_CTRL, DP83811_HW_RESET);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83811_suspend(struct phy_device *phydev)
|
|
{
|
|
int value;
|
|
|
|
value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);
|
|
|
|
if (!(value & DP83811_WOL_EN))
|
|
genphy_suspend(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dp83811_resume(struct phy_device *phydev)
|
|
{
|
|
genphy_resume(phydev);
|
|
|
|
phy_set_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
|
|
DP83811_WOL_CLR_INDICATION);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver dp83811_driver[] = {
|
|
{
|
|
.phy_id = DP83TC811_PHY_ID,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "TI DP83TC811",
|
|
/* PHY_BASIC_FEATURES */
|
|
.config_init = dp83811_config_init,
|
|
.config_aneg = dp83811_config_aneg,
|
|
.soft_reset = dp83811_phy_reset,
|
|
.get_wol = dp83811_get_wol,
|
|
.set_wol = dp83811_set_wol,
|
|
.ack_interrupt = dp83811_ack_interrupt,
|
|
.config_intr = dp83811_config_intr,
|
|
.suspend = dp83811_suspend,
|
|
.resume = dp83811_resume,
|
|
},
|
|
};
|
|
module_phy_driver(dp83811_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused dp83811_tbl[] = {
|
|
{ DP83TC811_PHY_ID, 0xfffffff0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(mdio, dp83811_tbl);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments DP83TC811 PHY driver");
|
|
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
|
|
MODULE_LICENSE("GPL");
|