openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/macintosh/windfarm_pm81.c

812 lines
21 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Windfarm PowerMac thermal control. iMac G5
*
* (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
*
* The algorithm used is the PID control algorithm, used the same
* way the published Darwin code does, using the same values that
* are present in the Darwin 8.2 snapshot property lists (note however
* that none of the code has been re-used, it's a complete re-implementation
*
* The various control loops found in Darwin config file are:
*
* PowerMac8,1 and PowerMac8,2
* ===========================
*
* System Fans control loop. Different based on models. In addition to the
* usual PID algorithm, the control loop gets 2 additional pairs of linear
* scaling factors (scale/offsets) expressed as 4.12 fixed point values
* signed offset, unsigned scale)
*
* The targets are modified such as:
* - the linked control (second control) gets the target value as-is
* (typically the drive fan)
* - the main control (first control) gets the target value scaled with
* the first pair of factors, and is then modified as below
* - the value of the target of the CPU Fan control loop is retrieved,
* scaled with the second pair of factors, and the max of that and
* the scaled target is applied to the main control.
*
* # model_id: 2
* controls : system-fan, drive-bay-fan
* sensors : hd-temp
* PID params : G_d = 0x15400000
* G_p = 0x00200000
* G_r = 0x000002fd
* History = 2 entries
* Input target = 0x3a0000
* Interval = 5s
* linear-factors : offset = 0xff38 scale = 0x0ccd
* offset = 0x0208 scale = 0x07ae
*
* # model_id: 3
* controls : system-fan, drive-bay-fan
* sensors : hd-temp
* PID params : G_d = 0x08e00000
* G_p = 0x00566666
* G_r = 0x0000072b
* History = 2 entries
* Input target = 0x350000
* Interval = 5s
* linear-factors : offset = 0xff38 scale = 0x0ccd
* offset = 0x0000 scale = 0x0000
*
* # model_id: 5
* controls : system-fan
* sensors : hd-temp
* PID params : G_d = 0x15400000
* G_p = 0x00233333
* G_r = 0x000002fd
* History = 2 entries
* Input target = 0x3a0000
* Interval = 5s
* linear-factors : offset = 0x0000 scale = 0x1000
* offset = 0x0091 scale = 0x0bae
*
* CPU Fan control loop. The loop is identical for all models. it
* has an additional pair of scaling factor. This is used to scale the
* systems fan control loop target result (the one before it gets scaled
* by the System Fans control loop itself). Then, the max value of the
* calculated target value and system fan value is sent to the fans
*
* controls : cpu-fan
* sensors : cpu-temp cpu-power
* PID params : From SMU sdb partition
* linear-factors : offset = 0xfb50 scale = 0x1000
*
* CPU Slew control loop. Not implemented. The cpufreq driver in linux is
* completely separate for now, though we could find a way to link it, either
* as a client reacting to overtemp notifications, or directling monitoring
* the CPU temperature
*
* WARNING ! The CPU control loop requires the CPU tmax for the current
* operating point. However, we currently are completely separated from
* the cpufreq driver and thus do not know what the current operating
* point is. Fortunately, we also do not have any hardware supporting anything
* but operating point 0 at the moment, thus we just peek that value directly
* from the SDB partition. If we ever end up with actually slewing the system
* clock and thus changing operating points, we'll have to find a way to
* communicate with the CPU freq driver;
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/kmod.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/smu.h>
#include "windfarm.h"
#include "windfarm_pid.h"
#define VERSION "0.4"
#undef DEBUG
#ifdef DEBUG
#define DBG(args...) printk(args)
#else
#define DBG(args...) do { } while(0)
#endif
/* define this to force CPU overtemp to 74 degree, useful for testing
* the overtemp code
*/
#undef HACKED_OVERTEMP
static int wf_smu_mach_model; /* machine model id */
/* Controls & sensors */
static struct wf_sensor *sensor_cpu_power;
static struct wf_sensor *sensor_cpu_temp;
static struct wf_sensor *sensor_hd_temp;
static struct wf_control *fan_cpu_main;
static struct wf_control *fan_hd;
static struct wf_control *fan_system;
static struct wf_control *cpufreq_clamp;
/* Set to kick the control loop into life */
static int wf_smu_all_controls_ok, wf_smu_all_sensors_ok;
static bool wf_smu_started;
/* Failure handling.. could be nicer */
#define FAILURE_FAN 0x01
#define FAILURE_SENSOR 0x02
#define FAILURE_OVERTEMP 0x04
static unsigned int wf_smu_failure_state;
static int wf_smu_readjust, wf_smu_skipping;
static bool wf_smu_overtemp;
/*
* ****** System Fans Control Loop ******
*
*/
/* Parameters for the System Fans control loop. Parameters
* not in this table such as interval, history size, ...
* are common to all versions and thus hard coded for now.
*/
struct wf_smu_sys_fans_param {
int model_id;
s32 itarget;
s32 gd, gp, gr;
s16 offset0;
u16 scale0;
s16 offset1;
u16 scale1;
};
#define WF_SMU_SYS_FANS_INTERVAL 5
#define WF_SMU_SYS_FANS_HISTORY_SIZE 2
/* State data used by the system fans control loop
*/
struct wf_smu_sys_fans_state {
int ticks;
s32 sys_setpoint;
s32 hd_setpoint;
s16 offset0;
u16 scale0;
s16 offset1;
u16 scale1;
struct wf_pid_state pid;
};
/*
* Configs for SMU System Fan control loop
*/
static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = {
/* Model ID 2 */
{
.model_id = 2,
.itarget = 0x3a0000,
.gd = 0x15400000,
.gp = 0x00200000,
.gr = 0x000002fd,
.offset0 = 0xff38,
.scale0 = 0x0ccd,
.offset1 = 0x0208,
.scale1 = 0x07ae,
},
/* Model ID 3 */
{
.model_id = 3,
.itarget = 0x350000,
.gd = 0x08e00000,
.gp = 0x00566666,
.gr = 0x0000072b,
.offset0 = 0xff38,
.scale0 = 0x0ccd,
.offset1 = 0x0000,
.scale1 = 0x0000,
},
/* Model ID 5 */
{
.model_id = 5,
.itarget = 0x3a0000,
.gd = 0x15400000,
.gp = 0x00233333,
.gr = 0x000002fd,
.offset0 = 0x0000,
.scale0 = 0x1000,
.offset1 = 0x0091,
.scale1 = 0x0bae,
},
};
#define WF_SMU_SYS_FANS_NUM_CONFIGS ARRAY_SIZE(wf_smu_sys_all_params)
static struct wf_smu_sys_fans_state *wf_smu_sys_fans;
/*
* ****** CPU Fans Control Loop ******
*
*/
#define WF_SMU_CPU_FANS_INTERVAL 1
#define WF_SMU_CPU_FANS_MAX_HISTORY 16
#define WF_SMU_CPU_FANS_SIBLING_SCALE 0x00001000
#define WF_SMU_CPU_FANS_SIBLING_OFFSET 0xfffffb50
/* State data used by the cpu fans control loop
*/
struct wf_smu_cpu_fans_state {
int ticks;
s32 cpu_setpoint;
s32 scale;
s32 offset;
struct wf_cpu_pid_state pid;
};
static struct wf_smu_cpu_fans_state *wf_smu_cpu_fans;
/*
* ***** Implementation *****
*
*/
static void wf_smu_create_sys_fans(void)
{
struct wf_smu_sys_fans_param *param = NULL;
struct wf_pid_param pid_param;
int i;
/* First, locate the params for this model */
for (i = 0; i < WF_SMU_SYS_FANS_NUM_CONFIGS; i++)
if (wf_smu_sys_all_params[i].model_id == wf_smu_mach_model) {
param = &wf_smu_sys_all_params[i];
break;
}
/* No params found, put fans to max */
if (param == NULL) {
printk(KERN_WARNING "windfarm: System fan config not found "
"for this machine model, max fan speed\n");
goto fail;
}
/* Alloc & initialize state */
wf_smu_sys_fans = kmalloc(sizeof(struct wf_smu_sys_fans_state),
GFP_KERNEL);
if (wf_smu_sys_fans == NULL) {
printk(KERN_WARNING "windfarm: Memory allocation error"
" max fan speed\n");
goto fail;
}
wf_smu_sys_fans->ticks = 1;
wf_smu_sys_fans->scale0 = param->scale0;
wf_smu_sys_fans->offset0 = param->offset0;
wf_smu_sys_fans->scale1 = param->scale1;
wf_smu_sys_fans->offset1 = param->offset1;
/* Fill PID params */
pid_param.gd = param->gd;
pid_param.gp = param->gp;
pid_param.gr = param->gr;
pid_param.interval = WF_SMU_SYS_FANS_INTERVAL;
pid_param.history_len = WF_SMU_SYS_FANS_HISTORY_SIZE;
pid_param.itarget = param->itarget;
pid_param.min = wf_control_get_min(fan_system);
pid_param.max = wf_control_get_max(fan_system);
if (fan_hd) {
pid_param.min =
max(pid_param.min, wf_control_get_min(fan_hd));
pid_param.max =
min(pid_param.max, wf_control_get_max(fan_hd));
}
wf_pid_init(&wf_smu_sys_fans->pid, &pid_param);
DBG("wf: System Fan control initialized.\n");
DBG(" itarged=%d.%03d, min=%d RPM, max=%d RPM\n",
FIX32TOPRINT(pid_param.itarget), pid_param.min, pid_param.max);
return;
fail:
if (fan_system)
wf_control_set_max(fan_system);
if (fan_hd)
wf_control_set_max(fan_hd);
}
static void wf_smu_sys_fans_tick(struct wf_smu_sys_fans_state *st)
{
s32 new_setpoint, temp, scaled, cputarget;
int rc;
if (--st->ticks != 0) {
if (wf_smu_readjust)
goto readjust;
return;
}
st->ticks = WF_SMU_SYS_FANS_INTERVAL;
rc = wf_sensor_get(sensor_hd_temp, &temp);
if (rc) {
printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
rc);
wf_smu_failure_state |= FAILURE_SENSOR;
return;
}
DBG("wf_smu: System Fans tick ! HD temp: %d.%03d\n",
FIX32TOPRINT(temp));
if (temp > (st->pid.param.itarget + 0x50000))
wf_smu_failure_state |= FAILURE_OVERTEMP;
new_setpoint = wf_pid_run(&st->pid, temp);
DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);
scaled = ((((s64)new_setpoint) * (s64)st->scale0) >> 12) + st->offset0;
DBG("wf_smu: scaled setpoint: %d RPM\n", (int)scaled);
cputarget = wf_smu_cpu_fans ? wf_smu_cpu_fans->pid.target : 0;
cputarget = ((((s64)cputarget) * (s64)st->scale1) >> 12) + st->offset1;
scaled = max(scaled, cputarget);
scaled = max(scaled, st->pid.param.min);
scaled = min(scaled, st->pid.param.max);
DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)scaled);
if (st->sys_setpoint == scaled && new_setpoint == st->hd_setpoint)
return;
st->sys_setpoint = scaled;
st->hd_setpoint = new_setpoint;
readjust:
if (fan_system && wf_smu_failure_state == 0) {
rc = wf_control_set(fan_system, st->sys_setpoint);
if (rc) {
printk(KERN_WARNING "windfarm: Sys fan error %d\n",
rc);
wf_smu_failure_state |= FAILURE_FAN;
}
}
if (fan_hd && wf_smu_failure_state == 0) {
rc = wf_control_set(fan_hd, st->hd_setpoint);
if (rc) {
printk(KERN_WARNING "windfarm: HD fan error %d\n",
rc);
wf_smu_failure_state |= FAILURE_FAN;
}
}
}
static void wf_smu_create_cpu_fans(void)
{
struct wf_cpu_pid_param pid_param;
const struct smu_sdbp_header *hdr;
struct smu_sdbp_cpupiddata *piddata;
struct smu_sdbp_fvt *fvt;
s32 tmax, tdelta, maxpow, powadj;
/* First, locate the PID params in SMU SBD */
hdr = smu_get_sdb_partition(SMU_SDB_CPUPIDDATA_ID, NULL);
if (hdr == 0) {
printk(KERN_WARNING "windfarm: CPU PID fan config not found "
"max fan speed\n");
goto fail;
}
piddata = (struct smu_sdbp_cpupiddata *)&hdr[1];
/* Get the FVT params for operating point 0 (the only supported one
* for now) in order to get tmax
*/
hdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
if (hdr) {
fvt = (struct smu_sdbp_fvt *)&hdr[1];
tmax = ((s32)fvt->maxtemp) << 16;
} else
tmax = 0x5e0000; /* 94 degree default */
/* Alloc & initialize state */
wf_smu_cpu_fans = kmalloc(sizeof(struct wf_smu_cpu_fans_state),
GFP_KERNEL);
if (wf_smu_cpu_fans == NULL)
goto fail;
wf_smu_cpu_fans->ticks = 1;
wf_smu_cpu_fans->scale = WF_SMU_CPU_FANS_SIBLING_SCALE;
wf_smu_cpu_fans->offset = WF_SMU_CPU_FANS_SIBLING_OFFSET;
/* Fill PID params */
pid_param.interval = WF_SMU_CPU_FANS_INTERVAL;
pid_param.history_len = piddata->history_len;
if (pid_param.history_len > WF_CPU_PID_MAX_HISTORY) {
printk(KERN_WARNING "windfarm: History size overflow on "
"CPU control loop (%d)\n", piddata->history_len);
pid_param.history_len = WF_CPU_PID_MAX_HISTORY;
}
pid_param.gd = piddata->gd;
pid_param.gp = piddata->gp;
pid_param.gr = piddata->gr / pid_param.history_len;
tdelta = ((s32)piddata->target_temp_delta) << 16;
maxpow = ((s32)piddata->max_power) << 16;
powadj = ((s32)piddata->power_adj) << 16;
pid_param.tmax = tmax;
pid_param.ttarget = tmax - tdelta;
pid_param.pmaxadj = maxpow - powadj;
pid_param.min = wf_control_get_min(fan_cpu_main);
pid_param.max = wf_control_get_max(fan_cpu_main);
wf_cpu_pid_init(&wf_smu_cpu_fans->pid, &pid_param);
DBG("wf: CPU Fan control initialized.\n");
DBG(" ttarget=%d.%03d, tmax=%d.%03d, min=%d RPM, max=%d RPM\n",
FIX32TOPRINT(pid_param.ttarget), FIX32TOPRINT(pid_param.tmax),
pid_param.min, pid_param.max);
return;
fail:
printk(KERN_WARNING "windfarm: CPU fan config not found\n"
"for this machine model, max fan speed\n");
if (cpufreq_clamp)
wf_control_set_max(cpufreq_clamp);
if (fan_cpu_main)
wf_control_set_max(fan_cpu_main);
}
static void wf_smu_cpu_fans_tick(struct wf_smu_cpu_fans_state *st)
{
s32 new_setpoint, temp, power, systarget;
int rc;
if (--st->ticks != 0) {
if (wf_smu_readjust)
goto readjust;
return;
}
st->ticks = WF_SMU_CPU_FANS_INTERVAL;
rc = wf_sensor_get(sensor_cpu_temp, &temp);
if (rc) {
printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
rc);
wf_smu_failure_state |= FAILURE_SENSOR;
return;
}
rc = wf_sensor_get(sensor_cpu_power, &power);
if (rc) {
printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
rc);
wf_smu_failure_state |= FAILURE_SENSOR;
return;
}
DBG("wf_smu: CPU Fans tick ! CPU temp: %d.%03d, power: %d.%03d\n",
FIX32TOPRINT(temp), FIX32TOPRINT(power));
#ifdef HACKED_OVERTEMP
if (temp > 0x4a0000)
wf_smu_failure_state |= FAILURE_OVERTEMP;
#else
if (temp > st->pid.param.tmax)
wf_smu_failure_state |= FAILURE_OVERTEMP;
#endif
new_setpoint = wf_cpu_pid_run(&st->pid, power, temp);
DBG("wf_smu: new_setpoint: %d RPM\n", (int)new_setpoint);
systarget = wf_smu_sys_fans ? wf_smu_sys_fans->pid.target : 0;
systarget = ((((s64)systarget) * (s64)st->scale) >> 12)
+ st->offset;
new_setpoint = max(new_setpoint, systarget);
new_setpoint = max(new_setpoint, st->pid.param.min);
new_setpoint = min(new_setpoint, st->pid.param.max);
DBG("wf_smu: adjusted setpoint: %d RPM\n", (int)new_setpoint);
if (st->cpu_setpoint == new_setpoint)
return;
st->cpu_setpoint = new_setpoint;
readjust:
if (fan_cpu_main && wf_smu_failure_state == 0) {
rc = wf_control_set(fan_cpu_main, st->cpu_setpoint);
if (rc) {
printk(KERN_WARNING "windfarm: CPU main fan"
" error %d\n", rc);
wf_smu_failure_state |= FAILURE_FAN;
}
}
}
/*
* ****** Setup / Init / Misc ... ******
*
*/
static void wf_smu_tick(void)
{
unsigned int last_failure = wf_smu_failure_state;
unsigned int new_failure;
if (!wf_smu_started) {
DBG("wf: creating control loops !\n");
wf_smu_create_sys_fans();
wf_smu_create_cpu_fans();
wf_smu_started = true;
}
/* Skipping ticks */
if (wf_smu_skipping && --wf_smu_skipping)
return;
wf_smu_failure_state = 0;
if (wf_smu_sys_fans)
wf_smu_sys_fans_tick(wf_smu_sys_fans);
if (wf_smu_cpu_fans)
wf_smu_cpu_fans_tick(wf_smu_cpu_fans);
wf_smu_readjust = 0;
new_failure = wf_smu_failure_state & ~last_failure;
/* If entering failure mode, clamp cpufreq and ramp all
* fans to full speed.
*/
if (wf_smu_failure_state && !last_failure) {
if (cpufreq_clamp)
wf_control_set_max(cpufreq_clamp);
if (fan_system)
wf_control_set_max(fan_system);
if (fan_cpu_main)
wf_control_set_max(fan_cpu_main);
if (fan_hd)
wf_control_set_max(fan_hd);
}
/* If leaving failure mode, unclamp cpufreq and readjust
* all fans on next iteration
*/
if (!wf_smu_failure_state && last_failure) {
if (cpufreq_clamp)
wf_control_set_min(cpufreq_clamp);
wf_smu_readjust = 1;
}
/* Overtemp condition detected, notify and start skipping a couple
* ticks to let the temperature go down
*/
if (new_failure & FAILURE_OVERTEMP) {
wf_set_overtemp();
wf_smu_skipping = 2;
wf_smu_overtemp = true;
}
/* We only clear the overtemp condition if overtemp is cleared
* _and_ no other failure is present. Since a sensor error will
* clear the overtemp condition (can't measure temperature) at
* the control loop levels, but we don't want to keep it clear
* here in this case
*/
if (!wf_smu_failure_state && wf_smu_overtemp) {
wf_clear_overtemp();
wf_smu_overtemp = false;
}
}
static void wf_smu_new_control(struct wf_control *ct)
{
if (wf_smu_all_controls_ok)
return;
if (fan_cpu_main == NULL && !strcmp(ct->name, "cpu-fan")) {
if (wf_get_control(ct) == 0)
fan_cpu_main = ct;
}
if (fan_system == NULL && !strcmp(ct->name, "system-fan")) {
if (wf_get_control(ct) == 0)
fan_system = ct;
}
if (cpufreq_clamp == NULL && !strcmp(ct->name, "cpufreq-clamp")) {
if (wf_get_control(ct) == 0)
cpufreq_clamp = ct;
}
/* Darwin property list says the HD fan is only for model ID
* 0, 1, 2 and 3
*/
if (wf_smu_mach_model > 3) {
if (fan_system && fan_cpu_main && cpufreq_clamp)
wf_smu_all_controls_ok = 1;
return;
}
if (fan_hd == NULL && !strcmp(ct->name, "drive-bay-fan")) {
if (wf_get_control(ct) == 0)
fan_hd = ct;
}
if (fan_system && fan_hd && fan_cpu_main && cpufreq_clamp)
wf_smu_all_controls_ok = 1;
}
static void wf_smu_new_sensor(struct wf_sensor *sr)
{
if (wf_smu_all_sensors_ok)
return;
if (sensor_cpu_power == NULL && !strcmp(sr->name, "cpu-power")) {
if (wf_get_sensor(sr) == 0)
sensor_cpu_power = sr;
}
if (sensor_cpu_temp == NULL && !strcmp(sr->name, "cpu-temp")) {
if (wf_get_sensor(sr) == 0)
sensor_cpu_temp = sr;
}
if (sensor_hd_temp == NULL && !strcmp(sr->name, "hd-temp")) {
if (wf_get_sensor(sr) == 0)
sensor_hd_temp = sr;
}
if (sensor_cpu_power && sensor_cpu_temp && sensor_hd_temp)
wf_smu_all_sensors_ok = 1;
}
static int wf_smu_notify(struct notifier_block *self,
unsigned long event, void *data)
{
switch(event) {
case WF_EVENT_NEW_CONTROL:
DBG("wf: new control %s detected\n",
((struct wf_control *)data)->name);
wf_smu_new_control(data);
wf_smu_readjust = 1;
break;
case WF_EVENT_NEW_SENSOR:
DBG("wf: new sensor %s detected\n",
((struct wf_sensor *)data)->name);
wf_smu_new_sensor(data);
break;
case WF_EVENT_TICK:
if (wf_smu_all_controls_ok && wf_smu_all_sensors_ok)
wf_smu_tick();
}
return 0;
}
static struct notifier_block wf_smu_events = {
.notifier_call = wf_smu_notify,
};
static int wf_init_pm(void)
{
const struct smu_sdbp_header *hdr;
hdr = smu_get_sdb_partition(SMU_SDB_SENSORTREE_ID, NULL);
if (hdr != 0) {
struct smu_sdbp_sensortree *st =
(struct smu_sdbp_sensortree *)&hdr[1];
wf_smu_mach_model = st->model_id;
}
printk(KERN_INFO "windfarm: Initializing for iMacG5 model ID %d\n",
wf_smu_mach_model);
return 0;
}
static int wf_smu_probe(struct platform_device *ddev)
{
wf_register_client(&wf_smu_events);
return 0;
}
static int wf_smu_remove(struct platform_device *ddev)
{
wf_unregister_client(&wf_smu_events);
/* XXX We don't have yet a guarantee that our callback isn't
* in progress when returning from wf_unregister_client, so
* we add an arbitrary delay. I'll have to fix that in the core
*/
msleep(1000);
/* Release all sensors */
/* One more crappy race: I don't think we have any guarantee here
* that the attribute callback won't race with the sensor beeing
* disposed of, and I'm not 100% certain what best way to deal
* with that except by adding locks all over... I'll do that
* eventually but heh, who ever rmmod this module anyway ?
*/
if (sensor_cpu_power)
wf_put_sensor(sensor_cpu_power);
if (sensor_cpu_temp)
wf_put_sensor(sensor_cpu_temp);
if (sensor_hd_temp)
wf_put_sensor(sensor_hd_temp);
/* Release all controls */
if (fan_cpu_main)
wf_put_control(fan_cpu_main);
if (fan_hd)
wf_put_control(fan_hd);
if (fan_system)
wf_put_control(fan_system);
if (cpufreq_clamp)
wf_put_control(cpufreq_clamp);
/* Destroy control loops state structures */
kfree(wf_smu_sys_fans);
kfree(wf_smu_cpu_fans);
return 0;
}
static struct platform_driver wf_smu_driver = {
.probe = wf_smu_probe,
.remove = wf_smu_remove,
.driver = {
.name = "windfarm",
},
};
static int __init wf_smu_init(void)
{
int rc = -ENODEV;
if (of_machine_is_compatible("PowerMac8,1") ||
of_machine_is_compatible("PowerMac8,2"))
rc = wf_init_pm();
if (rc == 0) {
#ifdef MODULE
request_module("windfarm_smu_controls");
request_module("windfarm_smu_sensors");
request_module("windfarm_lm75_sensor");
request_module("windfarm_cpufreq_clamp");
#endif /* MODULE */
platform_driver_register(&wf_smu_driver);
}
return rc;
}
static void __exit wf_smu_exit(void)
{
platform_driver_unregister(&wf_smu_driver);
}
module_init(wf_smu_init);
module_exit(wf_smu_exit);
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_DESCRIPTION("Thermal control logic for iMac G5");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:windfarm");
Reference in New Issue View Git Blame Copy Permalink