mirror of https://gitee.com/openkylin/linux.git
613 lines
16 KiB
C
613 lines
16 KiB
C
/*
|
|
STB6100 Silicon Tuner
|
|
Copyright (C) Manu Abraham (abraham.manu@gmail.com)
|
|
|
|
Copyright (C) ST Microelectronics
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "stb6100.h"
|
|
|
|
static unsigned int verbose;
|
|
module_param(verbose, int, 0644);
|
|
|
|
|
|
#define FE_ERROR 0
|
|
#define FE_NOTICE 1
|
|
#define FE_INFO 2
|
|
#define FE_DEBUG 3
|
|
|
|
#define dprintk(x, y, z, format, arg...) do { \
|
|
if (z) { \
|
|
if ((x > FE_ERROR) && (x > y)) \
|
|
printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \
|
|
else if ((x > FE_NOTICE) && (x > y)) \
|
|
printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \
|
|
else if ((x > FE_INFO) && (x > y)) \
|
|
printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \
|
|
else if ((x > FE_DEBUG) && (x > y)) \
|
|
printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \
|
|
} else { \
|
|
if (x > y) \
|
|
printk(format, ##arg); \
|
|
} \
|
|
} while (0)
|
|
|
|
struct stb6100_lkup {
|
|
u32 val_low;
|
|
u32 val_high;
|
|
u8 reg;
|
|
};
|
|
|
|
static int stb6100_release(struct dvb_frontend *fe);
|
|
|
|
static const struct stb6100_lkup lkup[] = {
|
|
{ 0, 950000, 0x0a },
|
|
{ 950000, 1000000, 0x0a },
|
|
{ 1000000, 1075000, 0x0c },
|
|
{ 1075000, 1200000, 0x00 },
|
|
{ 1200000, 1300000, 0x01 },
|
|
{ 1300000, 1370000, 0x02 },
|
|
{ 1370000, 1470000, 0x04 },
|
|
{ 1470000, 1530000, 0x05 },
|
|
{ 1530000, 1650000, 0x06 },
|
|
{ 1650000, 1800000, 0x08 },
|
|
{ 1800000, 1950000, 0x0a },
|
|
{ 1950000, 2150000, 0x0c },
|
|
{ 2150000, 9999999, 0x0c },
|
|
{ 0, 0, 0x00 }
|
|
};
|
|
|
|
/* Register names for easy debugging. */
|
|
static const char *stb6100_regnames[] = {
|
|
[STB6100_LD] = "LD",
|
|
[STB6100_VCO] = "VCO",
|
|
[STB6100_NI] = "NI",
|
|
[STB6100_NF_LSB] = "NF",
|
|
[STB6100_K] = "K",
|
|
[STB6100_G] = "G",
|
|
[STB6100_F] = "F",
|
|
[STB6100_DLB] = "DLB",
|
|
[STB6100_TEST1] = "TEST1",
|
|
[STB6100_FCCK] = "FCCK",
|
|
[STB6100_LPEN] = "LPEN",
|
|
[STB6100_TEST3] = "TEST3",
|
|
};
|
|
|
|
/* Template for normalisation, i.e. setting unused or undocumented
|
|
* bits as required according to the documentation.
|
|
*/
|
|
struct stb6100_regmask {
|
|
u8 mask;
|
|
u8 set;
|
|
};
|
|
|
|
static const struct stb6100_regmask stb6100_template[] = {
|
|
[STB6100_LD] = { 0xff, 0x00 },
|
|
[STB6100_VCO] = { 0xff, 0x00 },
|
|
[STB6100_NI] = { 0xff, 0x00 },
|
|
[STB6100_NF_LSB] = { 0xff, 0x00 },
|
|
[STB6100_K] = { 0xc7, 0x38 },
|
|
[STB6100_G] = { 0xef, 0x10 },
|
|
[STB6100_F] = { 0x1f, 0xc0 },
|
|
[STB6100_DLB] = { 0x38, 0xc4 },
|
|
[STB6100_TEST1] = { 0x00, 0x8f },
|
|
[STB6100_FCCK] = { 0x40, 0x0d },
|
|
[STB6100_LPEN] = { 0xf0, 0x0b },
|
|
[STB6100_TEST3] = { 0x00, 0xde },
|
|
};
|
|
|
|
/*
|
|
* Currently unused. Some boards might need it in the future
|
|
*/
|
|
static inline void stb6100_normalise_regs(u8 regs[])
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < STB6100_NUMREGS; i++)
|
|
regs[i] = (regs[i] & stb6100_template[i].mask) | stb6100_template[i].set;
|
|
}
|
|
|
|
static int stb6100_read_regs(struct stb6100_state *state, u8 regs[])
|
|
{
|
|
int rc;
|
|
struct i2c_msg msg = {
|
|
.addr = state->config->tuner_address,
|
|
.flags = I2C_M_RD,
|
|
.buf = regs,
|
|
.len = STB6100_NUMREGS
|
|
};
|
|
|
|
rc = i2c_transfer(state->i2c, &msg, 1);
|
|
if (unlikely(rc != 1)) {
|
|
dprintk(verbose, FE_ERROR, 1, "Read (0x%x) err, rc=[%d]",
|
|
state->config->tuner_address, rc);
|
|
|
|
return -EREMOTEIO;
|
|
}
|
|
if (unlikely(verbose > FE_DEBUG)) {
|
|
int i;
|
|
|
|
dprintk(verbose, FE_DEBUG, 1, " Read from 0x%02x", state->config->tuner_address);
|
|
for (i = 0; i < STB6100_NUMREGS; i++)
|
|
dprintk(verbose, FE_DEBUG, 1, " %s: 0x%02x", stb6100_regnames[i], regs[i]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int stb6100_read_reg(struct stb6100_state *state, u8 reg)
|
|
{
|
|
u8 regs[STB6100_NUMREGS];
|
|
int rc;
|
|
|
|
struct i2c_msg msg = {
|
|
.addr = state->config->tuner_address + reg,
|
|
.flags = I2C_M_RD,
|
|
.buf = regs,
|
|
.len = 1
|
|
};
|
|
|
|
rc = i2c_transfer(state->i2c, &msg, 1);
|
|
|
|
if (unlikely(reg >= STB6100_NUMREGS)) {
|
|
dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
|
|
return -EINVAL;
|
|
}
|
|
if (unlikely(verbose > FE_DEBUG)) {
|
|
dprintk(verbose, FE_DEBUG, 1, " Read from 0x%02x", state->config->tuner_address);
|
|
dprintk(verbose, FE_DEBUG, 1, " %s: 0x%02x", stb6100_regnames[reg], regs[0]);
|
|
}
|
|
|
|
return (unsigned int)regs[0];
|
|
}
|
|
|
|
static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len)
|
|
{
|
|
int rc;
|
|
u8 cmdbuf[len + 1];
|
|
struct i2c_msg msg = {
|
|
.addr = state->config->tuner_address,
|
|
.flags = 0,
|
|
.buf = cmdbuf,
|
|
.len = len + 1
|
|
};
|
|
|
|
if (unlikely(start < 1 || start + len > STB6100_NUMREGS)) {
|
|
dprintk(verbose, FE_ERROR, 1, "Invalid register range %d:%d",
|
|
start, len);
|
|
return -EINVAL;
|
|
}
|
|
memcpy(&cmdbuf[1], buf, len);
|
|
cmdbuf[0] = start;
|
|
|
|
if (unlikely(verbose > FE_DEBUG)) {
|
|
int i;
|
|
|
|
dprintk(verbose, FE_DEBUG, 1, " Write @ 0x%02x: [%d:%d]", state->config->tuner_address, start, len);
|
|
for (i = 0; i < len; i++)
|
|
dprintk(verbose, FE_DEBUG, 1, " %s: 0x%02x", stb6100_regnames[start + i], buf[i]);
|
|
}
|
|
rc = i2c_transfer(state->i2c, &msg, 1);
|
|
if (unlikely(rc != 1)) {
|
|
dprintk(verbose, FE_ERROR, 1, "(0x%x) write err [%d:%d], rc=[%d]",
|
|
(unsigned int)state->config->tuner_address, start, len, rc);
|
|
return -EREMOTEIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data)
|
|
{
|
|
if (unlikely(reg >= STB6100_NUMREGS)) {
|
|
dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
|
|
return -EREMOTEIO;
|
|
}
|
|
data = (data & stb6100_template[reg].mask) | stb6100_template[reg].set;
|
|
return stb6100_write_reg_range(state, &data, reg, 1);
|
|
}
|
|
|
|
|
|
static int stb6100_get_status(struct dvb_frontend *fe, u32 *status)
|
|
{
|
|
int rc;
|
|
struct stb6100_state *state = fe->tuner_priv;
|
|
|
|
rc = stb6100_read_reg(state, STB6100_LD);
|
|
if (rc < 0) {
|
|
dprintk(verbose, FE_ERROR, 1, "%s failed", __func__);
|
|
return rc;
|
|
}
|
|
return (rc & STB6100_LD_LOCK) ? TUNER_STATUS_LOCKED : 0;
|
|
}
|
|
|
|
static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
|
|
{
|
|
int rc;
|
|
u8 f;
|
|
struct stb6100_state *state = fe->tuner_priv;
|
|
|
|
rc = stb6100_read_reg(state, STB6100_F);
|
|
if (rc < 0)
|
|
return rc;
|
|
f = rc & STB6100_F_F;
|
|
|
|
state->status.bandwidth = (f + 5) * 2000; /* x2 for ZIF */
|
|
|
|
*bandwidth = state->bandwidth = state->status.bandwidth * 1000;
|
|
dprintk(verbose, FE_DEBUG, 1, "bandwidth = %u Hz", state->bandwidth);
|
|
return 0;
|
|
}
|
|
|
|
static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
|
|
{
|
|
u32 tmp;
|
|
int rc;
|
|
struct stb6100_state *state = fe->tuner_priv;
|
|
|
|
dprintk(verbose, FE_DEBUG, 1, "set bandwidth to %u Hz", bandwidth);
|
|
|
|
bandwidth /= 2; /* ZIF */
|
|
|
|
if (bandwidth >= 36000000) /* F[4:0] BW/2 max =31+5=36 mhz for F=31 */
|
|
tmp = 31;
|
|
else if (bandwidth <= 5000000) /* bw/2 min = 5Mhz for F=0 */
|
|
tmp = 0;
|
|
else /* if 5 < bw/2 < 36 */
|
|
tmp = (bandwidth + 500000) / 1000000 - 5;
|
|
|
|
/* Turn on LPF bandwidth setting clock control,
|
|
* set bandwidth, wait 10ms, turn off.
|
|
*/
|
|
rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK);
|
|
if (rc < 0)
|
|
return rc;
|
|
rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
msleep(5); /* This is dangerous as another (related) thread may start */
|
|
|
|
rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
msleep(10); /* This is dangerous as another (related) thread may start */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
int rc;
|
|
u32 nint, nfrac, fvco;
|
|
int psd2, odiv;
|
|
struct stb6100_state *state = fe->tuner_priv;
|
|
u8 regs[STB6100_NUMREGS];
|
|
|
|
rc = stb6100_read_regs(state, regs);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
odiv = (regs[STB6100_VCO] & STB6100_VCO_ODIV) >> STB6100_VCO_ODIV_SHIFT;
|
|
psd2 = (regs[STB6100_K] & STB6100_K_PSD2) >> STB6100_K_PSD2_SHIFT;
|
|
nint = regs[STB6100_NI];
|
|
nfrac = ((regs[STB6100_K] & STB6100_K_NF_MSB) << 8) | regs[STB6100_NF_LSB];
|
|
fvco = (nfrac * state->reference >> (9 - psd2)) + (nint * state->reference << psd2);
|
|
*frequency = state->frequency = fvco >> (odiv + 1);
|
|
|
|
dprintk(verbose, FE_DEBUG, 1,
|
|
"frequency = %u kHz, odiv = %u, psd2 = %u, fxtal = %u kHz, fvco = %u kHz, N(I) = %u, N(F) = %u",
|
|
state->frequency, odiv, psd2, state->reference, fvco, nint, nfrac);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
|
|
{
|
|
int rc;
|
|
const struct stb6100_lkup *ptr;
|
|
struct stb6100_state *state = fe->tuner_priv;
|
|
struct dtv_frontend_properties p;
|
|
|
|
u32 srate = 0, fvco, nint, nfrac;
|
|
u8 regs[STB6100_NUMREGS];
|
|
u8 g, psd2, odiv;
|
|
|
|
dprintk(verbose, FE_DEBUG, 1, "Version 2010-8-14 13:51");
|
|
|
|
if (fe->ops.get_frontend) {
|
|
dprintk(verbose, FE_DEBUG, 1, "Get frontend parameters");
|
|
fe->ops.get_frontend(fe);
|
|
}
|
|
srate = p.symbol_rate;
|
|
|
|
/* Set up tuner cleanly, LPF calibration on */
|
|
rc = stb6100_write_reg(state, STB6100_FCCK, 0x4d | STB6100_FCCK_FCCK);
|
|
if (rc < 0)
|
|
return rc; /* allow LPF calibration */
|
|
|
|
/* PLL Loop disabled, bias on, VCO on, synth on */
|
|
regs[STB6100_LPEN] = 0xeb;
|
|
rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Program the registers with their data values */
|
|
|
|
/* VCO divide ratio (LO divide ratio, VCO prescaler enable). */
|
|
if (frequency <= 1075000)
|
|
odiv = 1;
|
|
else
|
|
odiv = 0;
|
|
|
|
/* VCO enabled, search clock off as per LL3.7, 3.4.1 */
|
|
regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
|
|
|
|
/* OSM */
|
|
for (ptr = lkup;
|
|
(ptr->val_high != 0) && !CHKRANGE(frequency, ptr->val_low, ptr->val_high);
|
|
ptr++);
|
|
|
|
if (ptr->val_high == 0) {
|
|
printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency);
|
|
return -EINVAL;
|
|
}
|
|
regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_OSM) | ptr->reg;
|
|
rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if ((frequency > 1075000) && (frequency <= 1325000))
|
|
psd2 = 0;
|
|
else
|
|
psd2 = 1;
|
|
/* F(VCO) = F(LO) * (ODIV == 0 ? 2 : 4) */
|
|
fvco = frequency << (1 + odiv);
|
|
/* N(I) = floor(f(VCO) / (f(XTAL) * (PSD2 ? 2 : 1))) */
|
|
nint = fvco / (state->reference << psd2);
|
|
/* N(F) = round(f(VCO) / f(XTAL) * (PSD2 ? 2 : 1) - N(I)) * 2 ^ 9 */
|
|
nfrac = DIV_ROUND_CLOSEST((fvco - (nint * state->reference << psd2))
|
|
<< (9 - psd2), state->reference);
|
|
|
|
/* NI */
|
|
regs[STB6100_NI] = nint;
|
|
rc = stb6100_write_reg(state, STB6100_NI, regs[STB6100_NI]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* NF */
|
|
regs[STB6100_NF_LSB] = nfrac;
|
|
rc = stb6100_write_reg(state, STB6100_NF_LSB, regs[STB6100_NF_LSB]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* K */
|
|
regs[STB6100_K] = (0x38 & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
|
|
regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
|
|
rc = stb6100_write_reg(state, STB6100_K, regs[STB6100_K]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* G Baseband gain. */
|
|
if (srate >= 15000000)
|
|
g = 9; /* +4 dB */
|
|
else if (srate >= 5000000)
|
|
g = 11; /* +8 dB */
|
|
else
|
|
g = 14; /* +14 dB */
|
|
|
|
regs[STB6100_G] = (0x10 & ~STB6100_G_G) | g;
|
|
regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
|
|
regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
|
|
rc = stb6100_write_reg(state, STB6100_G, regs[STB6100_G]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* F we don't write as it is set up in BW set */
|
|
|
|
/* DLB set DC servo loop BW to 160Hz (LLA 3.8 / 2.1) */
|
|
regs[STB6100_DLB] = 0xcc;
|
|
rc = stb6100_write_reg(state, STB6100_DLB, regs[STB6100_DLB]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
dprintk(verbose, FE_DEBUG, 1,
|
|
"frequency = %u, srate = %u, g = %u, odiv = %u, psd2 = %u, fxtal = %u, osm = %u, fvco = %u, N(I) = %u, N(F) = %u",
|
|
frequency, srate, (unsigned int)g, (unsigned int)odiv,
|
|
(unsigned int)psd2, state->reference,
|
|
ptr->reg, fvco, nint, nfrac);
|
|
|
|
/* Set up the test registers */
|
|
regs[STB6100_TEST1] = 0x8f;
|
|
rc = stb6100_write_reg(state, STB6100_TEST1, regs[STB6100_TEST1]);
|
|
if (rc < 0)
|
|
return rc;
|
|
regs[STB6100_TEST3] = 0xde;
|
|
rc = stb6100_write_reg(state, STB6100_TEST3, regs[STB6100_TEST3]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Bring up tuner according to LLA 3.7 3.4.1, step 2 */
|
|
regs[STB6100_LPEN] = 0xfb; /* PLL Loop enabled, bias on, VCO on, synth on */
|
|
rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
msleep(2);
|
|
|
|
/* Bring up tuner according to LLA 3.7 3.4.1, step 3 */
|
|
regs[STB6100_VCO] &= ~STB6100_VCO_OCK; /* VCO fast search */
|
|
rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
msleep(10); /* This is dangerous as another (related) thread may start */ /* wait for LO to lock */
|
|
|
|
regs[STB6100_VCO] &= ~STB6100_VCO_OSCH; /* vco search disabled */
|
|
regs[STB6100_VCO] |= STB6100_VCO_OCK; /* search clock off */
|
|
rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
|
|
if (rc < 0)
|
|
return rc; /* Stop LPF calibration */
|
|
|
|
msleep(10); /* This is dangerous as another (related) thread may start */
|
|
/* wait for stabilisation, (should not be necessary) */
|
|
return 0;
|
|
}
|
|
|
|
static int stb6100_sleep(struct dvb_frontend *fe)
|
|
{
|
|
/* TODO: power down */
|
|
return 0;
|
|
}
|
|
|
|
static int stb6100_init(struct dvb_frontend *fe)
|
|
{
|
|
struct stb6100_state *state = fe->tuner_priv;
|
|
struct tuner_state *status = &state->status;
|
|
|
|
status->tunerstep = 125000;
|
|
status->ifreq = 0;
|
|
status->refclock = 27000000; /* Hz */
|
|
status->iqsense = 1;
|
|
status->bandwidth = 36000; /* kHz */
|
|
state->bandwidth = status->bandwidth * 1000; /* Hz */
|
|
state->reference = status->refclock / 1000; /* kHz */
|
|
|
|
/* Set default bandwidth. Modified, PN 13-May-10 */
|
|
return 0;
|
|
}
|
|
|
|
static int stb6100_get_state(struct dvb_frontend *fe,
|
|
enum tuner_param param,
|
|
struct tuner_state *state)
|
|
{
|
|
switch (param) {
|
|
case DVBFE_TUNER_FREQUENCY:
|
|
stb6100_get_frequency(fe, &state->frequency);
|
|
break;
|
|
case DVBFE_TUNER_TUNERSTEP:
|
|
break;
|
|
case DVBFE_TUNER_IFFREQ:
|
|
break;
|
|
case DVBFE_TUNER_BANDWIDTH:
|
|
stb6100_get_bandwidth(fe, &state->bandwidth);
|
|
break;
|
|
case DVBFE_TUNER_REFCLOCK:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stb6100_set_state(struct dvb_frontend *fe,
|
|
enum tuner_param param,
|
|
struct tuner_state *state)
|
|
{
|
|
struct stb6100_state *tstate = fe->tuner_priv;
|
|
|
|
switch (param) {
|
|
case DVBFE_TUNER_FREQUENCY:
|
|
stb6100_set_frequency(fe, state->frequency);
|
|
tstate->frequency = state->frequency;
|
|
break;
|
|
case DVBFE_TUNER_TUNERSTEP:
|
|
break;
|
|
case DVBFE_TUNER_IFFREQ:
|
|
break;
|
|
case DVBFE_TUNER_BANDWIDTH:
|
|
stb6100_set_bandwidth(fe, state->bandwidth);
|
|
tstate->bandwidth = state->bandwidth;
|
|
break;
|
|
case DVBFE_TUNER_REFCLOCK:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dvb_tuner_ops stb6100_ops = {
|
|
.info = {
|
|
.name = "STB6100 Silicon Tuner",
|
|
.frequency_min = 950000,
|
|
.frequency_max = 2150000,
|
|
.frequency_step = 0,
|
|
},
|
|
|
|
.init = stb6100_init,
|
|
.sleep = stb6100_sleep,
|
|
.get_status = stb6100_get_status,
|
|
.get_state = stb6100_get_state,
|
|
.set_state = stb6100_set_state,
|
|
.release = stb6100_release
|
|
};
|
|
|
|
struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe,
|
|
const struct stb6100_config *config,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
struct stb6100_state *state = NULL;
|
|
|
|
state = kzalloc(sizeof (struct stb6100_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
state->frontend = fe;
|
|
state->reference = config->refclock / 1000; /* kHz */
|
|
fe->tuner_priv = state;
|
|
fe->ops.tuner_ops = stb6100_ops;
|
|
|
|
printk("%s: Attaching STB6100 \n", __func__);
|
|
return fe;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
static int stb6100_release(struct dvb_frontend *fe)
|
|
{
|
|
struct stb6100_state *state = fe->tuner_priv;
|
|
|
|
fe->tuner_priv = NULL;
|
|
kfree(state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(stb6100_attach);
|
|
MODULE_PARM_DESC(verbose, "Set Verbosity level");
|
|
|
|
MODULE_AUTHOR("Manu Abraham");
|
|
MODULE_DESCRIPTION("STB6100 Silicon tuner");
|
|
MODULE_LICENSE("GPL");
|