mirror of https://gitee.com/openkylin/linux.git
78 lines
2.1 KiB
Plaintext
78 lines
2.1 KiB
Plaintext
MediaTek Frame Engine Ethernet controller
|
|
=========================================
|
|
|
|
The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
|
|
have dual GMAC each represented by a child node..
|
|
|
|
* Ethernet controller node
|
|
|
|
Required properties:
|
|
- compatible: Should be "mediatek,mt7623-eth"
|
|
- reg: Address and length of the register set for the device
|
|
- interrupts: Should contain the frame engines interrupt
|
|
- clocks: the clock used by the core
|
|
- clock-names: the names of the clock listed in the clocks property. These are
|
|
"ethif", "esw", "gp2", "gp1"
|
|
- power-domains: phandle to the power domain that the ethernet is part of
|
|
- resets: Should contain a phandle to the ethsys reset signal
|
|
- reset-names: Should contain the reset signal name "eth"
|
|
- mediatek,ethsys: phandle to the syscon node that handles the port setup
|
|
- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
|
|
and driver current
|
|
|
|
Optional properties:
|
|
- interrupt-parent: Should be the phandle for the interrupt controller
|
|
that services interrupts for this device
|
|
|
|
|
|
* Ethernet MAC node
|
|
|
|
Required properties:
|
|
- compatible: Should be "mediatek,eth-mac"
|
|
- reg: The number of the MAC
|
|
- phy-handle: see ethernet.txt file in the same directory.
|
|
|
|
Example:
|
|
|
|
eth: ethernet@1b100000 {
|
|
compatible = "mediatek,mt7623-eth";
|
|
reg = <0 0x1b100000 0 0x20000>;
|
|
clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
|
|
<ðsys CLK_ETHSYS_ESW>,
|
|
<ðsys CLK_ETHSYS_GP2>,
|
|
<ðsys CLK_ETHSYS_GP1>;
|
|
clock-names = "ethif", "esw", "gp2", "gp1";
|
|
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
|
|
resets = <ðsys MT2701_ETHSYS_ETH_RST>;
|
|
reset-names = "eth";
|
|
mediatek,ethsys = <ðsys>;
|
|
mediatek,pctl = <&syscfg_pctl_a>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gmac1: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
gmac2: mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-handle = <&phy1>;
|
|
};
|
|
|
|
mdio-bus {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
phy-mode = "rgmii";
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
phy-mode = "rgmii";
|
|
};
|
|
};
|
|
};
|