mirror of https://gitee.com/openkylin/linux.git
69 lines
1.8 KiB
Plaintext
69 lines
1.8 KiB
Plaintext
mt65xx USB3.0 PHY binding
|
|
--------------------------
|
|
|
|
This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
|
|
|
|
Required properties (controller (parent) node):
|
|
- compatible : should be "mediatek,mt8173-u3phy"
|
|
- reg : offset and length of register for phy, exclude port's
|
|
register.
|
|
- clocks : a list of phandle + clock-specifier pairs, one for each
|
|
entry in clock-names
|
|
- clock-names : must contain
|
|
"u3phya_ref": for reference clock of usb3.0 analog phy.
|
|
|
|
Required nodes : a sub-node is required for each port the controller
|
|
provides. Address range information including the usual
|
|
'reg' property is used inside these nodes to describe
|
|
the controller's topology.
|
|
|
|
Required properties (port (child) node):
|
|
- reg : address and length of the register set for the port.
|
|
- #phy-cells : should be 1 (See second example)
|
|
cell after port phandle is phy type from:
|
|
- PHY_TYPE_USB2
|
|
- PHY_TYPE_USB3
|
|
|
|
Example:
|
|
|
|
u3phy: usb-phy@11290000 {
|
|
compatible = "mediatek,mt8173-u3phy";
|
|
reg = <0 0x11290000 0 0x800>;
|
|
clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
|
|
clock-names = "u3phya_ref";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
status = "okay";
|
|
|
|
phy_port0: port@11290800 {
|
|
reg = <0 0x11290800 0 0x800>;
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
phy_port1: port@11291000 {
|
|
reg = <0 0x11291000 0 0x800>;
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
Specifying phy control of devices
|
|
---------------------------------
|
|
|
|
Device nodes should specify the configuration required in their "phys"
|
|
property, containing a phandle to the phy port node and a device type;
|
|
phy-names for each port are optional.
|
|
|
|
Example:
|
|
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
usb30: usb@11270000 {
|
|
...
|
|
phys = <&phy_port0 PHY_TYPE_USB3>;
|
|
phy-names = "usb3-0";
|
|
...
|
|
};
|