mirror of https://gitee.com/openkylin/linux.git
101 lines
4.7 KiB
C
101 lines
4.7 KiB
C
/*
|
|
* arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
|
|
*
|
|
* DDR/SDR Controller (DDRSDRC) - System peripherals registers.
|
|
* Based on AT91CAP9 datasheet revision B.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef AT91CAP9_DDRSDR_H
|
|
#define AT91CAP9_DDRSDR_H
|
|
|
|
#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */
|
|
#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
|
|
#define AT91_DDRSDRC_MODE_NORMAL 0
|
|
#define AT91_DDRSDRC_MODE_NOP 1
|
|
#define AT91_DDRSDRC_MODE_PRECHARGE 2
|
|
#define AT91_DDRSDRC_MODE_LMR 3
|
|
#define AT91_DDRSDRC_MODE_REFRESH 4
|
|
#define AT91_DDRSDRC_MODE_EXT_LMR 5
|
|
#define AT91_DDRSDRC_MODE_DEEP 6
|
|
|
|
#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */
|
|
#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
|
|
|
|
#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */
|
|
#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
|
|
#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
|
|
#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
|
|
#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
|
|
#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
|
|
#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
|
|
#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
|
|
#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
|
|
#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
|
|
#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
|
|
#define AT91_DDRSDRC_NR_11 (0 << 2)
|
|
#define AT91_DDRSDRC_NR_12 (1 << 2)
|
|
#define AT91_DDRSDRC_NR_13 (2 << 2)
|
|
#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
|
|
#define AT91_DDRSDRC_CAS_2 (2 << 4)
|
|
#define AT91_DDRSDRC_CAS_3 (3 << 4)
|
|
#define AT91_DDRSDRC_CAS_25 (6 << 4)
|
|
#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
|
|
#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
|
|
|
|
#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */
|
|
#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
|
|
#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
|
|
#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
|
|
#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
|
|
#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
|
|
#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
|
|
#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
|
|
#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
|
|
|
|
#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */
|
|
#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
|
|
#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
|
|
#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
|
|
#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
|
|
|
|
#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */
|
|
#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
|
|
#define AT91_DDRSDRC_LPCB_DISABLE 0
|
|
#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
|
|
#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
|
|
#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
|
|
#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
|
|
#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
|
|
#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
|
|
#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
|
|
#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
|
|
#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
|
|
#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
|
|
#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
|
|
|
|
#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */
|
|
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
|
|
#define AT91_DDRSDRC_MD_SDR 0
|
|
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
|
|
#define AT91_DDRSDRC_MD_DDR 2
|
|
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
|
|
|
|
#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */
|
|
#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
|
|
#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
|
|
#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
|
|
#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
|
|
#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
|
|
#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
|
|
#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
|
|
#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
|
|
#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
|
|
|
|
|
|
#endif
|