mirror of https://gitee.com/openkylin/linux.git
259 lines
7.8 KiB
C
259 lines
7.8 KiB
C
/*
|
|
* bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
|
|
*
|
|
* All Alchemy development boards (except, of course, the weird PB1000)
|
|
* have a few registers in a CPLD with standardised layout; they mostly
|
|
* only differ in base address and bit meanings in the RESETS and BOARD
|
|
* registers.
|
|
*
|
|
* All data taken from the official AMD board documentation sheets.
|
|
*/
|
|
|
|
#ifndef _DB1XXX_BCSR_H_
|
|
#define _DB1XXX_BCSR_H_
|
|
|
|
|
|
/* BCSR base addresses on various boards. BCSR base 2 refers to the
|
|
* physical address of the first HEXLEDS register, which is usually
|
|
* a variable offset from the WHOAMI register.
|
|
*/
|
|
|
|
/* DB1000, DB1100, DB1500, PB1100, PB1500 */
|
|
#define DB1000_BCSR_PHYS_ADDR 0x0E000000
|
|
#define DB1000_BCSR_HEXLED_OFS 0x01000000
|
|
|
|
#define DB1550_BCSR_PHYS_ADDR 0x0F000000
|
|
#define DB1550_BCSR_HEXLED_OFS 0x00400000
|
|
|
|
#define PB1550_BCSR_PHYS_ADDR 0x0F000000
|
|
#define PB1550_BCSR_HEXLED_OFS 0x00800000
|
|
|
|
#define DB1200_BCSR_PHYS_ADDR 0x19800000
|
|
#define DB1200_BCSR_HEXLED_OFS 0x00400000
|
|
|
|
#define PB1200_BCSR_PHYS_ADDR 0x0D800000
|
|
#define PB1200_BCSR_HEXLED_OFS 0x00400000
|
|
|
|
#define DB1300_BCSR_PHYS_ADDR 0x19800000
|
|
#define DB1300_BCSR_HEXLED_OFS 0x00400000
|
|
|
|
enum bcsr_id {
|
|
/* BCSR base 1 */
|
|
BCSR_WHOAMI = 0,
|
|
BCSR_STATUS,
|
|
BCSR_SWITCHES,
|
|
BCSR_RESETS,
|
|
BCSR_PCMCIA,
|
|
BCSR_BOARD,
|
|
BCSR_LEDS,
|
|
BCSR_SYSTEM,
|
|
/* Au1200/1300 based boards */
|
|
BCSR_INTCLR,
|
|
BCSR_INTSET,
|
|
BCSR_MASKCLR,
|
|
BCSR_MASKSET,
|
|
BCSR_SIGSTAT,
|
|
BCSR_INTSTAT,
|
|
|
|
/* BCSR base 2 */
|
|
BCSR_HEXLEDS,
|
|
BCSR_RSVD1,
|
|
BCSR_HEXCLEAR,
|
|
|
|
BCSR_CNT,
|
|
};
|
|
|
|
/* register offsets, valid for all Db1xxx/Pb1xxx boards */
|
|
#define BCSR_REG_WHOAMI 0x00
|
|
#define BCSR_REG_STATUS 0x04
|
|
#define BCSR_REG_SWITCHES 0x08
|
|
#define BCSR_REG_RESETS 0x0c
|
|
#define BCSR_REG_PCMCIA 0x10
|
|
#define BCSR_REG_BOARD 0x14
|
|
#define BCSR_REG_LEDS 0x18
|
|
#define BCSR_REG_SYSTEM 0x1c
|
|
/* Au1200/Au1300 based boards: CPLD IRQ muxer */
|
|
#define BCSR_REG_INTCLR 0x20
|
|
#define BCSR_REG_INTSET 0x24
|
|
#define BCSR_REG_MASKCLR 0x28
|
|
#define BCSR_REG_MASKSET 0x2c
|
|
#define BCSR_REG_SIGSTAT 0x30
|
|
#define BCSR_REG_INTSTAT 0x34
|
|
|
|
/* hexled control, offset from BCSR base 2 */
|
|
#define BCSR_REG_HEXLEDS 0x00
|
|
#define BCSR_REG_HEXCLEAR 0x08
|
|
|
|
/*
|
|
* Register Bits and Pieces.
|
|
*/
|
|
#define BCSR_WHOAMI_DCID(x) ((x) & 0xf)
|
|
#define BCSR_WHOAMI_CPLD(x) (((x) >> 4) & 0xf)
|
|
#define BCSR_WHOAMI_BOARD(x) (((x) >> 8) & 0xf)
|
|
|
|
/* register "WHOAMI" bits 11:8 identify the board */
|
|
enum bcsr_whoami_boards {
|
|
BCSR_WHOAMI_PB1500 = 1,
|
|
BCSR_WHOAMI_PB1500R2,
|
|
BCSR_WHOAMI_PB1100,
|
|
BCSR_WHOAMI_DB1000,
|
|
BCSR_WHOAMI_DB1100,
|
|
BCSR_WHOAMI_DB1500,
|
|
BCSR_WHOAMI_DB1550,
|
|
BCSR_WHOAMI_PB1550_DDR,
|
|
BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR,
|
|
BCSR_WHOAMI_PB1550_SDR,
|
|
BCSR_WHOAMI_PB1200_DDR1,
|
|
BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
|
|
BCSR_WHOAMI_PB1200_DDR2,
|
|
BCSR_WHOAMI_DB1200,
|
|
BCSR_WHOAMI_DB1300,
|
|
};
|
|
|
|
/* STATUS reg. Unless otherwise noted, they're valid on all boards.
|
|
* PB1200 = DB1200.
|
|
*/
|
|
#define BCSR_STATUS_PC0VS 0x0003
|
|
#define BCSR_STATUS_PC1VS 0x000C
|
|
#define BCSR_STATUS_PC0FI 0x0010
|
|
#define BCSR_STATUS_PC1FI 0x0020
|
|
#define BCSR_STATUS_PB1550_SWAPBOOT 0x0040
|
|
#define BCSR_STATUS_SRAMWIDTH 0x0080
|
|
#define BCSR_STATUS_FLASHBUSY 0x0100
|
|
#define BCSR_STATUS_ROMBUSY 0x0400
|
|
#define BCSR_STATUS_SD0WP 0x0400 /* DB1200/DB1300:SD1 */
|
|
#define BCSR_STATUS_SD1WP 0x0800
|
|
#define BCSR_STATUS_USBOTGID 0x0800 /* PB/DB1550 */
|
|
#define BCSR_STATUS_DB1000_SWAPBOOT 0x2000
|
|
#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200/1300 */
|
|
#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200/1300 */
|
|
#define BCSR_STATUS_DB1200_U0RXD 0x1000 /* DB1200 */
|
|
#define BCSR_STATUS_DB1200_U1RXD 0x2000 /* DB1200 */
|
|
#define BCSR_STATUS_FLASHDEN 0xC000
|
|
#define BCSR_STATUS_DB1550_U0RXD 0x1000 /* DB1550 */
|
|
#define BCSR_STATUS_DB1550_U3RXD 0x2000 /* DB1550 */
|
|
#define BCSR_STATUS_PB1550_U0RXD 0x1000 /* PB1550 */
|
|
#define BCSR_STATUS_PB1550_U1RXD 0x2000 /* PB1550 */
|
|
#define BCSR_STATUS_PB1550_U3RXD 0x8000 /* PB1550 */
|
|
|
|
#define BCSR_STATUS_CFWP 0x4000 /* DB1300 */
|
|
#define BCSR_STATUS_USBOCn 0x2000 /* DB1300 */
|
|
#define BCSR_STATUS_OTGOCn 0x1000 /* DB1300 */
|
|
#define BCSR_STATUS_DCDMARQ 0x0010 /* DB1300 */
|
|
#define BCSR_STATUS_IDEDMARQ 0x0020 /* DB1300 */
|
|
|
|
/* DB/PB1000,1100,1500,1550 */
|
|
#define BCSR_RESETS_PHY0 0x0001
|
|
#define BCSR_RESETS_PHY1 0x0002
|
|
#define BCSR_RESETS_DC 0x0004
|
|
#define BCSR_RESETS_FIR_SEL 0x2000
|
|
#define BCSR_RESETS_IRDA_MODE_MASK 0xC000
|
|
#define BCSR_RESETS_IRDA_MODE_FULL 0x0000
|
|
#define BCSR_RESETS_PB1550_WSCFSM 0x2000
|
|
#define BCSR_RESETS_IRDA_MODE_OFF 0x4000
|
|
#define BCSR_RESETS_IRDA_MODE_2_3 0x8000
|
|
#define BCSR_RESETS_IRDA_MODE_1_3 0xC000
|
|
#define BCSR_RESETS_DMAREQ 0x8000 /* PB1550 */
|
|
|
|
#define BCSR_BOARD_PCIM66EN 0x0001
|
|
#define BCSR_BOARD_SD0PWR 0x0040
|
|
#define BCSR_BOARD_SD1PWR 0x0080
|
|
#define BCSR_BOARD_PCIM33 0x0100
|
|
#define BCSR_BOARD_PCIEXTARB 0x0200
|
|
#define BCSR_BOARD_GPIO200RST 0x0400
|
|
#define BCSR_BOARD_PCICLKOUT 0x0800
|
|
#define BCSR_BOARD_PCICFG 0x1000
|
|
#define BCSR_BOARD_SPISEL 0x2000 /* PB/DB1550 */
|
|
#define BCSR_BOARD_SD0WP 0x4000 /* DB1100 */
|
|
#define BCSR_BOARD_SD1WP 0x8000 /* DB1100 */
|
|
|
|
|
|
/* DB/PB1200/1300 */
|
|
#define BCSR_RESETS_ETH 0x0001
|
|
#define BCSR_RESETS_CAMERA 0x0002
|
|
#define BCSR_RESETS_DC 0x0004
|
|
#define BCSR_RESETS_IDE 0x0008
|
|
#define BCSR_RESETS_TV 0x0010 /* DB1200/1300 */
|
|
/* Not resets but in the same register */
|
|
#define BCSR_RESETS_PWMR1MUX 0x0800 /* DB1200 */
|
|
#define BCSR_RESETS_PB1200_WSCFSM 0x0800 /* PB1200 */
|
|
#define BCSR_RESETS_PSC0MUX 0x1000
|
|
#define BCSR_RESETS_PSC1MUX 0x2000
|
|
#define BCSR_RESETS_SPISEL 0x4000
|
|
#define BCSR_RESETS_SD1MUX 0x8000 /* PB1200 */
|
|
|
|
#define BCSR_RESETS_VDDQSHDN 0x0200 /* DB1300 */
|
|
#define BCSR_RESETS_OTPPGM 0x0400 /* DB1300 */
|
|
#define BCSR_RESETS_OTPSCLK 0x0800 /* DB1300 */
|
|
#define BCSR_RESETS_OTPWRPROT 0x1000 /* DB1300 */
|
|
#define BCSR_RESETS_OTPCSB 0x2000 /* DB1300 */
|
|
#define BCSR_RESETS_OTGPWR 0x4000 /* DB1300 */
|
|
#define BCSR_RESETS_USBHPWR 0x8000 /* DB1300 */
|
|
|
|
#define BCSR_BOARD_LCDVEE 0x0001
|
|
#define BCSR_BOARD_LCDVDD 0x0002
|
|
#define BCSR_BOARD_LCDBL 0x0004
|
|
#define BCSR_BOARD_CAMSNAP 0x0010
|
|
#define BCSR_BOARD_CAMPWR 0x0020
|
|
#define BCSR_BOARD_SD0PWR 0x0040
|
|
#define BCSR_BOARD_CAMCS 0x0010 /* DB1300 */
|
|
#define BCSR_BOARD_HDMI_DE 0x0040 /* DB1300 */
|
|
|
|
#define BCSR_SWITCHES_DIP 0x00FF
|
|
#define BCSR_SWITCHES_DIP_1 0x0080
|
|
#define BCSR_SWITCHES_DIP_2 0x0040
|
|
#define BCSR_SWITCHES_DIP_3 0x0020
|
|
#define BCSR_SWITCHES_DIP_4 0x0010
|
|
#define BCSR_SWITCHES_DIP_5 0x0008
|
|
#define BCSR_SWITCHES_DIP_6 0x0004
|
|
#define BCSR_SWITCHES_DIP_7 0x0002
|
|
#define BCSR_SWITCHES_DIP_8 0x0001
|
|
#define BCSR_SWITCHES_ROTARY 0x0F00
|
|
|
|
|
|
#define BCSR_PCMCIA_PC0VPP 0x0003
|
|
#define BCSR_PCMCIA_PC0VCC 0x000C
|
|
#define BCSR_PCMCIA_PC0DRVEN 0x0010
|
|
#define BCSR_PCMCIA_PC0RST 0x0080
|
|
#define BCSR_PCMCIA_PC1VPP 0x0300
|
|
#define BCSR_PCMCIA_PC1VCC 0x0C00
|
|
#define BCSR_PCMCIA_PC1DRVEN 0x1000
|
|
#define BCSR_PCMCIA_PC1RST 0x8000
|
|
|
|
|
|
#define BCSR_LEDS_DECIMALS 0x0003
|
|
#define BCSR_LEDS_LED0 0x0100
|
|
#define BCSR_LEDS_LED1 0x0200
|
|
#define BCSR_LEDS_LED2 0x0400
|
|
#define BCSR_LEDS_LED3 0x0800
|
|
|
|
|
|
#define BCSR_SYSTEM_RESET 0x8000 /* clear to reset */
|
|
#define BCSR_SYSTEM_PWROFF 0x4000 /* set to power off */
|
|
#define BCSR_SYSTEM_VDDI 0x001F /* PB1xxx boards */
|
|
#define BCSR_SYSTEM_DEBUGCSMASK 0x003F /* DB1300 */
|
|
#define BCSR_SYSTEM_UDMAMODE 0x0100 /* DB1300 */
|
|
#define BCSR_SYSTEM_WAKEONIRQ 0x0200 /* DB1300 */
|
|
#define BCSR_SYSTEM_VDDI1300 0x3C00 /* DB1300 */
|
|
|
|
|
|
|
|
/* initialize BCSR for a board. Provide the PHYSICAL addresses of both
|
|
* BCSR spaces.
|
|
*/
|
|
void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys);
|
|
|
|
/* read a board register */
|
|
unsigned short bcsr_read(enum bcsr_id reg);
|
|
|
|
/* write to a board register */
|
|
void bcsr_write(enum bcsr_id reg, unsigned short val);
|
|
|
|
/* modify a register. clear bits set in 'clr', set bits set in 'set' */
|
|
void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set);
|
|
|
|
/* install CPLD IRQ demuxer (DB1200/PB1200) */
|
|
void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq);
|
|
|
|
#endif
|