mirror of https://gitee.com/openkylin/linux.git
1455 lines
37 KiB
C
1455 lines
37 KiB
C
/*
|
|
* Copyright (C) 2015 Cavium, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License
|
|
* as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_net.h>
|
|
|
|
#include "nic_reg.h"
|
|
#include "nic.h"
|
|
#include "thunder_bgx.h"
|
|
|
|
#define DRV_NAME "thunder-BGX"
|
|
#define DRV_VERSION "1.0"
|
|
|
|
struct lmac {
|
|
struct bgx *bgx;
|
|
int dmac;
|
|
u8 mac[ETH_ALEN];
|
|
u8 lmac_type;
|
|
u8 lane_to_sds;
|
|
bool use_training;
|
|
bool autoneg;
|
|
bool link_up;
|
|
int lmacid; /* ID within BGX */
|
|
int lmacid_bd; /* ID on board */
|
|
struct net_device netdev;
|
|
struct phy_device *phydev;
|
|
unsigned int last_duplex;
|
|
unsigned int last_link;
|
|
unsigned int last_speed;
|
|
bool is_sgmii;
|
|
struct delayed_work dwork;
|
|
struct workqueue_struct *check_link;
|
|
};
|
|
|
|
struct bgx {
|
|
u8 bgx_id;
|
|
struct lmac lmac[MAX_LMAC_PER_BGX];
|
|
u8 lmac_count;
|
|
u8 max_lmac;
|
|
u8 acpi_lmac_idx;
|
|
void __iomem *reg_base;
|
|
struct pci_dev *pdev;
|
|
bool is_dlm;
|
|
bool is_rgx;
|
|
};
|
|
|
|
static struct bgx *bgx_vnic[MAX_BGX_THUNDER];
|
|
static int lmac_count; /* Total no of LMACs in system */
|
|
|
|
static int bgx_xaui_check_link(struct lmac *lmac);
|
|
|
|
/* Supported devices */
|
|
static const struct pci_device_id bgx_id_table[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_BGX) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_RGX) },
|
|
{ 0, } /* end of table */
|
|
};
|
|
|
|
MODULE_AUTHOR("Cavium Inc");
|
|
MODULE_DESCRIPTION("Cavium Thunder BGX/MAC Driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_DEVICE_TABLE(pci, bgx_id_table);
|
|
|
|
/* The Cavium ThunderX network controller can *only* be found in SoCs
|
|
* containing the ThunderX ARM64 CPU implementation. All accesses to the device
|
|
* registers on this platform are implicitly strongly ordered with respect
|
|
* to memory accesses. So writeq_relaxed() and readq_relaxed() are safe to use
|
|
* with no memory barriers in this driver. The readq()/writeq() functions add
|
|
* explicit ordering operation which in this case are redundant, and only
|
|
* add overhead.
|
|
*/
|
|
|
|
/* Register read/write APIs */
|
|
static u64 bgx_reg_read(struct bgx *bgx, u8 lmac, u64 offset)
|
|
{
|
|
void __iomem *addr = bgx->reg_base + ((u32)lmac << 20) + offset;
|
|
|
|
return readq_relaxed(addr);
|
|
}
|
|
|
|
static void bgx_reg_write(struct bgx *bgx, u8 lmac, u64 offset, u64 val)
|
|
{
|
|
void __iomem *addr = bgx->reg_base + ((u32)lmac << 20) + offset;
|
|
|
|
writeq_relaxed(val, addr);
|
|
}
|
|
|
|
static void bgx_reg_modify(struct bgx *bgx, u8 lmac, u64 offset, u64 val)
|
|
{
|
|
void __iomem *addr = bgx->reg_base + ((u32)lmac << 20) + offset;
|
|
|
|
writeq_relaxed(val | readq_relaxed(addr), addr);
|
|
}
|
|
|
|
static int bgx_poll_reg(struct bgx *bgx, u8 lmac, u64 reg, u64 mask, bool zero)
|
|
{
|
|
int timeout = 100;
|
|
u64 reg_val;
|
|
|
|
while (timeout) {
|
|
reg_val = bgx_reg_read(bgx, lmac, reg);
|
|
if (zero && !(reg_val & mask))
|
|
return 0;
|
|
if (!zero && (reg_val & mask))
|
|
return 0;
|
|
usleep_range(1000, 2000);
|
|
timeout--;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int max_bgx_per_node;
|
|
static void set_max_bgx_per_node(struct pci_dev *pdev)
|
|
{
|
|
u16 sdevid;
|
|
|
|
if (max_bgx_per_node)
|
|
return;
|
|
|
|
pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sdevid);
|
|
switch (sdevid) {
|
|
case PCI_SUBSYS_DEVID_81XX_BGX:
|
|
case PCI_SUBSYS_DEVID_81XX_RGX:
|
|
max_bgx_per_node = MAX_BGX_PER_CN81XX;
|
|
break;
|
|
case PCI_SUBSYS_DEVID_83XX_BGX:
|
|
max_bgx_per_node = MAX_BGX_PER_CN83XX;
|
|
break;
|
|
case PCI_SUBSYS_DEVID_88XX_BGX:
|
|
default:
|
|
max_bgx_per_node = MAX_BGX_PER_CN88XX;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static struct bgx *get_bgx(int node, int bgx_idx)
|
|
{
|
|
int idx = (node * max_bgx_per_node) + bgx_idx;
|
|
|
|
return bgx_vnic[idx];
|
|
}
|
|
|
|
/* Return number of BGX present in HW */
|
|
unsigned bgx_get_map(int node)
|
|
{
|
|
int i;
|
|
unsigned map = 0;
|
|
|
|
for (i = 0; i < max_bgx_per_node; i++) {
|
|
if (bgx_vnic[(node * max_bgx_per_node) + i])
|
|
map |= (1 << i);
|
|
}
|
|
|
|
return map;
|
|
}
|
|
EXPORT_SYMBOL(bgx_get_map);
|
|
|
|
/* Return number of LMAC configured for this BGX */
|
|
int bgx_get_lmac_count(int node, int bgx_idx)
|
|
{
|
|
struct bgx *bgx;
|
|
|
|
bgx = get_bgx(node, bgx_idx);
|
|
if (bgx)
|
|
return bgx->lmac_count;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(bgx_get_lmac_count);
|
|
|
|
/* Returns the current link status of LMAC */
|
|
void bgx_get_lmac_link_state(int node, int bgx_idx, int lmacid, void *status)
|
|
{
|
|
struct bgx_link_status *link = (struct bgx_link_status *)status;
|
|
struct bgx *bgx;
|
|
struct lmac *lmac;
|
|
|
|
bgx = get_bgx(node, bgx_idx);
|
|
if (!bgx)
|
|
return;
|
|
|
|
lmac = &bgx->lmac[lmacid];
|
|
link->mac_type = lmac->lmac_type;
|
|
link->link_up = lmac->link_up;
|
|
link->duplex = lmac->last_duplex;
|
|
link->speed = lmac->last_speed;
|
|
}
|
|
EXPORT_SYMBOL(bgx_get_lmac_link_state);
|
|
|
|
const u8 *bgx_get_lmac_mac(int node, int bgx_idx, int lmacid)
|
|
{
|
|
struct bgx *bgx = get_bgx(node, bgx_idx);
|
|
|
|
if (bgx)
|
|
return bgx->lmac[lmacid].mac;
|
|
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(bgx_get_lmac_mac);
|
|
|
|
void bgx_set_lmac_mac(int node, int bgx_idx, int lmacid, const u8 *mac)
|
|
{
|
|
struct bgx *bgx = get_bgx(node, bgx_idx);
|
|
|
|
if (!bgx)
|
|
return;
|
|
|
|
ether_addr_copy(bgx->lmac[lmacid].mac, mac);
|
|
}
|
|
EXPORT_SYMBOL(bgx_set_lmac_mac);
|
|
|
|
void bgx_lmac_rx_tx_enable(int node, int bgx_idx, int lmacid, bool enable)
|
|
{
|
|
struct bgx *bgx = get_bgx(node, bgx_idx);
|
|
struct lmac *lmac;
|
|
u64 cfg;
|
|
|
|
if (!bgx)
|
|
return;
|
|
lmac = &bgx->lmac[lmacid];
|
|
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG);
|
|
if (enable)
|
|
cfg |= CMR_PKT_RX_EN | CMR_PKT_TX_EN;
|
|
else
|
|
cfg &= ~(CMR_PKT_RX_EN | CMR_PKT_TX_EN);
|
|
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg);
|
|
|
|
if (bgx->is_rgx)
|
|
xcv_setup_link(enable ? lmac->link_up : 0, lmac->last_speed);
|
|
}
|
|
EXPORT_SYMBOL(bgx_lmac_rx_tx_enable);
|
|
|
|
void bgx_lmac_get_pfc(int node, int bgx_idx, int lmacid, void *pause)
|
|
{
|
|
struct pfc *pfc = (struct pfc *)pause;
|
|
struct bgx *bgx = get_bgx(node, bgx_idx);
|
|
struct lmac *lmac;
|
|
u64 cfg;
|
|
|
|
if (!bgx)
|
|
return;
|
|
lmac = &bgx->lmac[lmacid];
|
|
if (lmac->is_sgmii)
|
|
return;
|
|
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_CBFC_CTL);
|
|
pfc->fc_rx = cfg & RX_EN;
|
|
pfc->fc_tx = cfg & TX_EN;
|
|
pfc->autoneg = 0;
|
|
}
|
|
EXPORT_SYMBOL(bgx_lmac_get_pfc);
|
|
|
|
void bgx_lmac_set_pfc(int node, int bgx_idx, int lmacid, void *pause)
|
|
{
|
|
struct pfc *pfc = (struct pfc *)pause;
|
|
struct bgx *bgx = get_bgx(node, bgx_idx);
|
|
struct lmac *lmac;
|
|
u64 cfg;
|
|
|
|
if (!bgx)
|
|
return;
|
|
lmac = &bgx->lmac[lmacid];
|
|
if (lmac->is_sgmii)
|
|
return;
|
|
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_CBFC_CTL);
|
|
cfg &= ~(RX_EN | TX_EN);
|
|
cfg |= (pfc->fc_rx ? RX_EN : 0x00);
|
|
cfg |= (pfc->fc_tx ? TX_EN : 0x00);
|
|
bgx_reg_write(bgx, lmacid, BGX_SMUX_CBFC_CTL, cfg);
|
|
}
|
|
EXPORT_SYMBOL(bgx_lmac_set_pfc);
|
|
|
|
static void bgx_sgmii_change_link_state(struct lmac *lmac)
|
|
{
|
|
struct bgx *bgx = lmac->bgx;
|
|
u64 cmr_cfg;
|
|
u64 port_cfg = 0;
|
|
u64 misc_ctl = 0;
|
|
|
|
cmr_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_CMRX_CFG);
|
|
cmr_cfg &= ~CMR_EN;
|
|
bgx_reg_write(bgx, lmac->lmacid, BGX_CMRX_CFG, cmr_cfg);
|
|
|
|
port_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG);
|
|
misc_ctl = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_PCS_MISCX_CTL);
|
|
|
|
if (lmac->link_up) {
|
|
misc_ctl &= ~PCS_MISC_CTL_GMX_ENO;
|
|
port_cfg &= ~GMI_PORT_CFG_DUPLEX;
|
|
port_cfg |= (lmac->last_duplex << 2);
|
|
} else {
|
|
misc_ctl |= PCS_MISC_CTL_GMX_ENO;
|
|
}
|
|
|
|
switch (lmac->last_speed) {
|
|
case 10:
|
|
port_cfg &= ~GMI_PORT_CFG_SPEED; /* speed 0 */
|
|
port_cfg |= GMI_PORT_CFG_SPEED_MSB; /* speed_msb 1 */
|
|
port_cfg &= ~GMI_PORT_CFG_SLOT_TIME; /* slottime 0 */
|
|
misc_ctl &= ~PCS_MISC_CTL_SAMP_PT_MASK;
|
|
misc_ctl |= 50; /* samp_pt */
|
|
bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_SLOT, 64);
|
|
bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_BURST, 0);
|
|
break;
|
|
case 100:
|
|
port_cfg &= ~GMI_PORT_CFG_SPEED; /* speed 0 */
|
|
port_cfg &= ~GMI_PORT_CFG_SPEED_MSB; /* speed_msb 0 */
|
|
port_cfg &= ~GMI_PORT_CFG_SLOT_TIME; /* slottime 0 */
|
|
misc_ctl &= ~PCS_MISC_CTL_SAMP_PT_MASK;
|
|
misc_ctl |= 5; /* samp_pt */
|
|
bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_SLOT, 64);
|
|
bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_BURST, 0);
|
|
break;
|
|
case 1000:
|
|
port_cfg |= GMI_PORT_CFG_SPEED; /* speed 1 */
|
|
port_cfg &= ~GMI_PORT_CFG_SPEED_MSB; /* speed_msb 0 */
|
|
port_cfg |= GMI_PORT_CFG_SLOT_TIME; /* slottime 1 */
|
|
misc_ctl &= ~PCS_MISC_CTL_SAMP_PT_MASK;
|
|
misc_ctl |= 1; /* samp_pt */
|
|
bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_SLOT, 512);
|
|
if (lmac->last_duplex)
|
|
bgx_reg_write(bgx, lmac->lmacid,
|
|
BGX_GMP_GMI_TXX_BURST, 0);
|
|
else
|
|
bgx_reg_write(bgx, lmac->lmacid,
|
|
BGX_GMP_GMI_TXX_BURST, 8192);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_PCS_MISCX_CTL, misc_ctl);
|
|
bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG, port_cfg);
|
|
|
|
port_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG);
|
|
|
|
/* Re-enable lmac */
|
|
cmr_cfg |= CMR_EN;
|
|
bgx_reg_write(bgx, lmac->lmacid, BGX_CMRX_CFG, cmr_cfg);
|
|
|
|
if (bgx->is_rgx && (cmr_cfg & (CMR_PKT_RX_EN | CMR_PKT_TX_EN)))
|
|
xcv_setup_link(lmac->link_up, lmac->last_speed);
|
|
}
|
|
|
|
static void bgx_lmac_handler(struct net_device *netdev)
|
|
{
|
|
struct lmac *lmac = container_of(netdev, struct lmac, netdev);
|
|
struct phy_device *phydev;
|
|
int link_changed = 0;
|
|
|
|
if (!lmac)
|
|
return;
|
|
|
|
phydev = lmac->phydev;
|
|
|
|
if (!phydev->link && lmac->last_link)
|
|
link_changed = -1;
|
|
|
|
if (phydev->link &&
|
|
(lmac->last_duplex != phydev->duplex ||
|
|
lmac->last_link != phydev->link ||
|
|
lmac->last_speed != phydev->speed)) {
|
|
link_changed = 1;
|
|
}
|
|
|
|
lmac->last_link = phydev->link;
|
|
lmac->last_speed = phydev->speed;
|
|
lmac->last_duplex = phydev->duplex;
|
|
|
|
if (!link_changed)
|
|
return;
|
|
|
|
if (link_changed > 0)
|
|
lmac->link_up = true;
|
|
else
|
|
lmac->link_up = false;
|
|
|
|
if (lmac->is_sgmii)
|
|
bgx_sgmii_change_link_state(lmac);
|
|
else
|
|
bgx_xaui_check_link(lmac);
|
|
}
|
|
|
|
u64 bgx_get_rx_stats(int node, int bgx_idx, int lmac, int idx)
|
|
{
|
|
struct bgx *bgx;
|
|
|
|
bgx = get_bgx(node, bgx_idx);
|
|
if (!bgx)
|
|
return 0;
|
|
|
|
if (idx > 8)
|
|
lmac = 0;
|
|
return bgx_reg_read(bgx, lmac, BGX_CMRX_RX_STAT0 + (idx * 8));
|
|
}
|
|
EXPORT_SYMBOL(bgx_get_rx_stats);
|
|
|
|
u64 bgx_get_tx_stats(int node, int bgx_idx, int lmac, int idx)
|
|
{
|
|
struct bgx *bgx;
|
|
|
|
bgx = get_bgx(node, bgx_idx);
|
|
if (!bgx)
|
|
return 0;
|
|
|
|
return bgx_reg_read(bgx, lmac, BGX_CMRX_TX_STAT0 + (idx * 8));
|
|
}
|
|
EXPORT_SYMBOL(bgx_get_tx_stats);
|
|
|
|
static void bgx_flush_dmac_addrs(struct bgx *bgx, int lmac)
|
|
{
|
|
u64 offset;
|
|
|
|
while (bgx->lmac[lmac].dmac > 0) {
|
|
offset = ((bgx->lmac[lmac].dmac - 1) * sizeof(u64)) +
|
|
(lmac * MAX_DMAC_PER_LMAC * sizeof(u64));
|
|
bgx_reg_write(bgx, 0, BGX_CMR_RX_DMACX_CAM + offset, 0);
|
|
bgx->lmac[lmac].dmac--;
|
|
}
|
|
}
|
|
|
|
/* Configure BGX LMAC in internal loopback mode */
|
|
void bgx_lmac_internal_loopback(int node, int bgx_idx,
|
|
int lmac_idx, bool enable)
|
|
{
|
|
struct bgx *bgx;
|
|
struct lmac *lmac;
|
|
u64 cfg;
|
|
|
|
bgx = get_bgx(node, bgx_idx);
|
|
if (!bgx)
|
|
return;
|
|
|
|
lmac = &bgx->lmac[lmac_idx];
|
|
if (lmac->is_sgmii) {
|
|
cfg = bgx_reg_read(bgx, lmac_idx, BGX_GMP_PCS_MRX_CTL);
|
|
if (enable)
|
|
cfg |= PCS_MRX_CTL_LOOPBACK1;
|
|
else
|
|
cfg &= ~PCS_MRX_CTL_LOOPBACK1;
|
|
bgx_reg_write(bgx, lmac_idx, BGX_GMP_PCS_MRX_CTL, cfg);
|
|
} else {
|
|
cfg = bgx_reg_read(bgx, lmac_idx, BGX_SPUX_CONTROL1);
|
|
if (enable)
|
|
cfg |= SPU_CTL_LOOPBACK;
|
|
else
|
|
cfg &= ~SPU_CTL_LOOPBACK;
|
|
bgx_reg_write(bgx, lmac_idx, BGX_SPUX_CONTROL1, cfg);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(bgx_lmac_internal_loopback);
|
|
|
|
static int bgx_lmac_sgmii_init(struct bgx *bgx, struct lmac *lmac)
|
|
{
|
|
int lmacid = lmac->lmacid;
|
|
u64 cfg;
|
|
|
|
bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_TXX_THRESH, 0x30);
|
|
/* max packet size */
|
|
bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_RXX_JABBER, MAX_FRAME_SIZE);
|
|
|
|
/* Disable frame alignment if using preamble */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_GMI_TXX_APPEND);
|
|
if (cfg & 1)
|
|
bgx_reg_write(bgx, lmacid, BGX_GMP_GMI_TXX_SGMII_CTL, 0);
|
|
|
|
/* Enable lmac */
|
|
bgx_reg_modify(bgx, lmacid, BGX_CMRX_CFG, CMR_EN);
|
|
|
|
/* PCS reset */
|
|
bgx_reg_modify(bgx, lmacid, BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_RESET);
|
|
if (bgx_poll_reg(bgx, lmacid, BGX_GMP_PCS_MRX_CTL,
|
|
PCS_MRX_CTL_RESET, true)) {
|
|
dev_err(&bgx->pdev->dev, "BGX PCS reset not completed\n");
|
|
return -1;
|
|
}
|
|
|
|
/* power down, reset autoneg, autoneg enable */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_PCS_MRX_CTL);
|
|
cfg &= ~PCS_MRX_CTL_PWR_DN;
|
|
cfg |= PCS_MRX_CTL_RST_AN;
|
|
if (lmac->phydev) {
|
|
cfg |= PCS_MRX_CTL_AN_EN;
|
|
} else {
|
|
/* In scenarios where PHY driver is not present or it's a
|
|
* non-standard PHY, FW sets AN_EN to inform Linux driver
|
|
* to do auto-neg and link polling or not.
|
|
*/
|
|
if (cfg & PCS_MRX_CTL_AN_EN)
|
|
lmac->autoneg = true;
|
|
}
|
|
bgx_reg_write(bgx, lmacid, BGX_GMP_PCS_MRX_CTL, cfg);
|
|
|
|
if (lmac->lmac_type == BGX_MODE_QSGMII) {
|
|
/* Disable disparity check for QSGMII */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_PCS_MISCX_CTL);
|
|
cfg &= ~PCS_MISC_CTL_DISP_EN;
|
|
bgx_reg_write(bgx, lmacid, BGX_GMP_PCS_MISCX_CTL, cfg);
|
|
return 0;
|
|
}
|
|
|
|
if ((lmac->lmac_type == BGX_MODE_SGMII) && lmac->phydev) {
|
|
if (bgx_poll_reg(bgx, lmacid, BGX_GMP_PCS_MRX_STATUS,
|
|
PCS_MRX_STATUS_AN_CPT, false)) {
|
|
dev_err(&bgx->pdev->dev, "BGX AN_CPT not completed\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bgx_lmac_xaui_init(struct bgx *bgx, struct lmac *lmac)
|
|
{
|
|
u64 cfg;
|
|
int lmacid = lmac->lmacid;
|
|
|
|
/* Reset SPU */
|
|
bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET);
|
|
if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET, true)) {
|
|
dev_err(&bgx->pdev->dev, "BGX SPU reset not completed\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Disable LMAC */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG);
|
|
cfg &= ~CMR_EN;
|
|
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg);
|
|
|
|
bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER);
|
|
/* Set interleaved running disparity for RXAUI */
|
|
if (lmac->lmac_type == BGX_MODE_RXAUI)
|
|
bgx_reg_modify(bgx, lmacid, BGX_SPUX_MISC_CONTROL,
|
|
SPU_MISC_CTL_INTLV_RDISP);
|
|
|
|
/* Clear receive packet disable */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_MISC_CONTROL);
|
|
cfg &= ~SPU_MISC_CTL_RX_DIS;
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_MISC_CONTROL, cfg);
|
|
|
|
/* clear all interrupts */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_INT);
|
|
bgx_reg_write(bgx, lmacid, BGX_SMUX_RX_INT, cfg);
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_INT);
|
|
bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_INT, cfg);
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT);
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg);
|
|
|
|
if (lmac->use_training) {
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LP_CUP, 0x00);
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_CUP, 0x00);
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_REP, 0x00);
|
|
/* training enable */
|
|
bgx_reg_modify(bgx, lmacid,
|
|
BGX_SPUX_BR_PMD_CRTL, SPU_PMD_CRTL_TRAIN_EN);
|
|
}
|
|
|
|
/* Append FCS to each packet */
|
|
bgx_reg_modify(bgx, lmacid, BGX_SMUX_TX_APPEND, SMU_TX_APPEND_FCS_D);
|
|
|
|
/* Disable forward error correction */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_FEC_CONTROL);
|
|
cfg &= ~SPU_FEC_CTL_FEC_EN;
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_FEC_CONTROL, cfg);
|
|
|
|
/* Disable autoneg */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_AN_CONTROL);
|
|
cfg = cfg & ~(SPU_AN_CTL_AN_EN | SPU_AN_CTL_XNP_EN);
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_AN_CONTROL, cfg);
|
|
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_AN_ADV);
|
|
if (lmac->lmac_type == BGX_MODE_10G_KR)
|
|
cfg |= (1 << 23);
|
|
else if (lmac->lmac_type == BGX_MODE_40G_KR)
|
|
cfg |= (1 << 24);
|
|
else
|
|
cfg &= ~((1 << 23) | (1 << 24));
|
|
cfg = cfg & (~((1ULL << 25) | (1ULL << 22) | (1ULL << 12)));
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_AN_ADV, cfg);
|
|
|
|
cfg = bgx_reg_read(bgx, 0, BGX_SPU_DBG_CONTROL);
|
|
cfg &= ~SPU_DBG_CTL_AN_ARB_LINK_CHK_EN;
|
|
bgx_reg_write(bgx, 0, BGX_SPU_DBG_CONTROL, cfg);
|
|
|
|
/* Enable lmac */
|
|
bgx_reg_modify(bgx, lmacid, BGX_CMRX_CFG, CMR_EN);
|
|
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_CONTROL1);
|
|
cfg &= ~SPU_CTL_LOW_POWER;
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_CONTROL1, cfg);
|
|
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_CTL);
|
|
cfg &= ~SMU_TX_CTL_UNI_EN;
|
|
cfg |= SMU_TX_CTL_DIC_EN;
|
|
bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_CTL, cfg);
|
|
|
|
/* Enable receive and transmission of pause frames */
|
|
bgx_reg_write(bgx, lmacid, BGX_SMUX_CBFC_CTL, ((0xffffULL << 32) |
|
|
BCK_EN | DRP_EN | TX_EN | RX_EN));
|
|
/* Configure pause time and interval */
|
|
bgx_reg_write(bgx, lmacid,
|
|
BGX_SMUX_TX_PAUSE_PKT_TIME, DEFAULT_PAUSE_TIME);
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_PAUSE_PKT_INTERVAL);
|
|
cfg &= ~0xFFFFull;
|
|
bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_PAUSE_PKT_INTERVAL,
|
|
cfg | (DEFAULT_PAUSE_TIME - 0x1000));
|
|
bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_PAUSE_ZERO, 0x01);
|
|
|
|
/* take lmac_count into account */
|
|
bgx_reg_modify(bgx, lmacid, BGX_SMUX_TX_THRESH, (0x100 - 1));
|
|
/* max packet size */
|
|
bgx_reg_modify(bgx, lmacid, BGX_SMUX_RX_JABBER, MAX_FRAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bgx_xaui_check_link(struct lmac *lmac)
|
|
{
|
|
struct bgx *bgx = lmac->bgx;
|
|
int lmacid = lmac->lmacid;
|
|
int lmac_type = lmac->lmac_type;
|
|
u64 cfg;
|
|
|
|
if (lmac->use_training) {
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT);
|
|
if (!(cfg & (1ull << 13))) {
|
|
cfg = (1ull << 13) | (1ull << 14);
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg);
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_BR_PMD_CRTL);
|
|
cfg |= (1ull << 0);
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_CRTL, cfg);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* wait for PCS to come out of reset */
|
|
if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET, true)) {
|
|
dev_err(&bgx->pdev->dev, "BGX SPU reset not completed\n");
|
|
return -1;
|
|
}
|
|
|
|
if ((lmac_type == BGX_MODE_10G_KR) || (lmac_type == BGX_MODE_XFI) ||
|
|
(lmac_type == BGX_MODE_40G_KR) || (lmac_type == BGX_MODE_XLAUI)) {
|
|
if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_BR_STATUS1,
|
|
SPU_BR_STATUS_BLK_LOCK, false)) {
|
|
dev_err(&bgx->pdev->dev,
|
|
"SPU_BR_STATUS_BLK_LOCK not completed\n");
|
|
return -1;
|
|
}
|
|
} else {
|
|
if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_BX_STATUS,
|
|
SPU_BX_STATUS_RX_ALIGN, false)) {
|
|
dev_err(&bgx->pdev->dev,
|
|
"SPU_BX_STATUS_RX_ALIGN not completed\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Clear rcvflt bit (latching high) and read it back */
|
|
if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT)
|
|
bgx_reg_modify(bgx, lmacid,
|
|
BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT);
|
|
if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) {
|
|
dev_err(&bgx->pdev->dev, "Receive fault, retry training\n");
|
|
if (lmac->use_training) {
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT);
|
|
if (!(cfg & (1ull << 13))) {
|
|
cfg = (1ull << 13) | (1ull << 14);
|
|
bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg);
|
|
cfg = bgx_reg_read(bgx, lmacid,
|
|
BGX_SPUX_BR_PMD_CRTL);
|
|
cfg |= (1ull << 0);
|
|
bgx_reg_write(bgx, lmacid,
|
|
BGX_SPUX_BR_PMD_CRTL, cfg);
|
|
return -1;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for BGX RX to be idle */
|
|
if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_RX_IDLE, false)) {
|
|
dev_err(&bgx->pdev->dev, "SMU RX not idle\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Wait for BGX TX to be idle */
|
|
if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_TX_IDLE, false)) {
|
|
dev_err(&bgx->pdev->dev, "SMU TX not idle\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Check for MAC RX faults */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_CTL);
|
|
/* 0 - Link is okay, 1 - Local fault, 2 - Remote fault */
|
|
cfg &= SMU_RX_CTL_STATUS;
|
|
if (!cfg)
|
|
return 0;
|
|
|
|
/* Rx local/remote fault seen.
|
|
* Do lmac reinit to see if condition recovers
|
|
*/
|
|
bgx_lmac_xaui_init(bgx, lmac);
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void bgx_poll_for_sgmii_link(struct lmac *lmac)
|
|
{
|
|
u64 pcs_link, an_result;
|
|
u8 speed;
|
|
|
|
pcs_link = bgx_reg_read(lmac->bgx, lmac->lmacid,
|
|
BGX_GMP_PCS_MRX_STATUS);
|
|
|
|
/*Link state bit is sticky, read it again*/
|
|
if (!(pcs_link & PCS_MRX_STATUS_LINK))
|
|
pcs_link = bgx_reg_read(lmac->bgx, lmac->lmacid,
|
|
BGX_GMP_PCS_MRX_STATUS);
|
|
|
|
if (bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_GMP_PCS_MRX_STATUS,
|
|
PCS_MRX_STATUS_AN_CPT, false)) {
|
|
lmac->link_up = false;
|
|
lmac->last_speed = SPEED_UNKNOWN;
|
|
lmac->last_duplex = DUPLEX_UNKNOWN;
|
|
goto next_poll;
|
|
}
|
|
|
|
lmac->link_up = ((pcs_link & PCS_MRX_STATUS_LINK) != 0) ? true : false;
|
|
an_result = bgx_reg_read(lmac->bgx, lmac->lmacid,
|
|
BGX_GMP_PCS_ANX_AN_RESULTS);
|
|
|
|
speed = (an_result >> 3) & 0x3;
|
|
lmac->last_duplex = (an_result >> 1) & 0x1;
|
|
switch (speed) {
|
|
case 0:
|
|
lmac->last_speed = 10;
|
|
break;
|
|
case 1:
|
|
lmac->last_speed = 100;
|
|
break;
|
|
case 2:
|
|
lmac->last_speed = 1000;
|
|
break;
|
|
default:
|
|
lmac->link_up = false;
|
|
lmac->last_speed = SPEED_UNKNOWN;
|
|
lmac->last_duplex = DUPLEX_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
next_poll:
|
|
|
|
if (lmac->last_link != lmac->link_up) {
|
|
if (lmac->link_up)
|
|
bgx_sgmii_change_link_state(lmac);
|
|
lmac->last_link = lmac->link_up;
|
|
}
|
|
|
|
queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 3);
|
|
}
|
|
|
|
static void bgx_poll_for_link(struct work_struct *work)
|
|
{
|
|
struct lmac *lmac;
|
|
u64 spu_link, smu_link;
|
|
|
|
lmac = container_of(work, struct lmac, dwork.work);
|
|
if (lmac->is_sgmii) {
|
|
bgx_poll_for_sgmii_link(lmac);
|
|
return;
|
|
}
|
|
|
|
/* Receive link is latching low. Force it high and verify it */
|
|
bgx_reg_modify(lmac->bgx, lmac->lmacid,
|
|
BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK);
|
|
bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1,
|
|
SPU_STATUS1_RCV_LNK, false);
|
|
|
|
spu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1);
|
|
smu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SMUX_RX_CTL);
|
|
|
|
if ((spu_link & SPU_STATUS1_RCV_LNK) &&
|
|
!(smu_link & SMU_RX_CTL_STATUS)) {
|
|
lmac->link_up = 1;
|
|
if (lmac->lmac_type == BGX_MODE_XLAUI)
|
|
lmac->last_speed = 40000;
|
|
else
|
|
lmac->last_speed = 10000;
|
|
lmac->last_duplex = 1;
|
|
} else {
|
|
lmac->link_up = 0;
|
|
lmac->last_speed = SPEED_UNKNOWN;
|
|
lmac->last_duplex = DUPLEX_UNKNOWN;
|
|
}
|
|
|
|
if (lmac->last_link != lmac->link_up) {
|
|
if (lmac->link_up) {
|
|
if (bgx_xaui_check_link(lmac)) {
|
|
/* Errors, clear link_up state */
|
|
lmac->link_up = 0;
|
|
lmac->last_speed = SPEED_UNKNOWN;
|
|
lmac->last_duplex = DUPLEX_UNKNOWN;
|
|
}
|
|
}
|
|
lmac->last_link = lmac->link_up;
|
|
}
|
|
|
|
queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2);
|
|
}
|
|
|
|
static int phy_interface_mode(u8 lmac_type)
|
|
{
|
|
if (lmac_type == BGX_MODE_QSGMII)
|
|
return PHY_INTERFACE_MODE_QSGMII;
|
|
if (lmac_type == BGX_MODE_RGMII)
|
|
return PHY_INTERFACE_MODE_RGMII;
|
|
|
|
return PHY_INTERFACE_MODE_SGMII;
|
|
}
|
|
|
|
static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
|
|
{
|
|
struct lmac *lmac;
|
|
u64 cfg;
|
|
|
|
lmac = &bgx->lmac[lmacid];
|
|
lmac->bgx = bgx;
|
|
|
|
if ((lmac->lmac_type == BGX_MODE_SGMII) ||
|
|
(lmac->lmac_type == BGX_MODE_QSGMII) ||
|
|
(lmac->lmac_type == BGX_MODE_RGMII)) {
|
|
lmac->is_sgmii = 1;
|
|
if (bgx_lmac_sgmii_init(bgx, lmac))
|
|
return -1;
|
|
} else {
|
|
lmac->is_sgmii = 0;
|
|
if (bgx_lmac_xaui_init(bgx, lmac))
|
|
return -1;
|
|
}
|
|
|
|
if (lmac->is_sgmii) {
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_GMI_TXX_APPEND);
|
|
cfg |= ((1ull << 2) | (1ull << 1)); /* FCS and PAD */
|
|
bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_TXX_APPEND, cfg);
|
|
bgx_reg_write(bgx, lmacid, BGX_GMP_GMI_TXX_MIN_PKT, 60 - 1);
|
|
} else {
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_APPEND);
|
|
cfg |= ((1ull << 2) | (1ull << 1)); /* FCS and PAD */
|
|
bgx_reg_modify(bgx, lmacid, BGX_SMUX_TX_APPEND, cfg);
|
|
bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_MIN_PKT, 60 + 4);
|
|
}
|
|
|
|
/* Enable lmac */
|
|
bgx_reg_modify(bgx, lmacid, BGX_CMRX_CFG, CMR_EN);
|
|
|
|
/* Restore default cfg, incase low level firmware changed it */
|
|
bgx_reg_write(bgx, lmacid, BGX_CMRX_RX_DMAC_CTL, 0x03);
|
|
|
|
if ((lmac->lmac_type != BGX_MODE_XFI) &&
|
|
(lmac->lmac_type != BGX_MODE_XLAUI) &&
|
|
(lmac->lmac_type != BGX_MODE_40G_KR) &&
|
|
(lmac->lmac_type != BGX_MODE_10G_KR)) {
|
|
if (!lmac->phydev) {
|
|
if (lmac->autoneg) {
|
|
bgx_reg_write(bgx, lmacid,
|
|
BGX_GMP_PCS_LINKX_TIMER,
|
|
PCS_LINKX_TIMER_COUNT);
|
|
goto poll;
|
|
} else {
|
|
/* Default to below link speed and duplex */
|
|
lmac->link_up = true;
|
|
lmac->last_speed = 1000;
|
|
lmac->last_duplex = 1;
|
|
bgx_sgmii_change_link_state(lmac);
|
|
return 0;
|
|
}
|
|
}
|
|
lmac->phydev->dev_flags = 0;
|
|
|
|
if (phy_connect_direct(&lmac->netdev, lmac->phydev,
|
|
bgx_lmac_handler,
|
|
phy_interface_mode(lmac->lmac_type)))
|
|
return -ENODEV;
|
|
|
|
phy_start_aneg(lmac->phydev);
|
|
return 0;
|
|
}
|
|
|
|
poll:
|
|
lmac->check_link = alloc_workqueue("check_link", WQ_UNBOUND |
|
|
WQ_MEM_RECLAIM, 1);
|
|
if (!lmac->check_link)
|
|
return -ENOMEM;
|
|
INIT_DELAYED_WORK(&lmac->dwork, bgx_poll_for_link);
|
|
queue_delayed_work(lmac->check_link, &lmac->dwork, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid)
|
|
{
|
|
struct lmac *lmac;
|
|
u64 cfg;
|
|
|
|
lmac = &bgx->lmac[lmacid];
|
|
if (lmac->check_link) {
|
|
/* Destroy work queue */
|
|
cancel_delayed_work_sync(&lmac->dwork);
|
|
destroy_workqueue(lmac->check_link);
|
|
}
|
|
|
|
/* Disable packet reception */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG);
|
|
cfg &= ~CMR_PKT_RX_EN;
|
|
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg);
|
|
|
|
/* Give chance for Rx/Tx FIFO to get drained */
|
|
bgx_poll_reg(bgx, lmacid, BGX_CMRX_RX_FIFO_LEN, (u64)0x1FFF, true);
|
|
bgx_poll_reg(bgx, lmacid, BGX_CMRX_TX_FIFO_LEN, (u64)0x3FFF, true);
|
|
|
|
/* Disable packet transmission */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG);
|
|
cfg &= ~CMR_PKT_TX_EN;
|
|
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg);
|
|
|
|
/* Disable serdes lanes */
|
|
if (!lmac->is_sgmii)
|
|
bgx_reg_modify(bgx, lmacid,
|
|
BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER);
|
|
else
|
|
bgx_reg_modify(bgx, lmacid,
|
|
BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_PWR_DN);
|
|
|
|
/* Disable LMAC */
|
|
cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG);
|
|
cfg &= ~CMR_EN;
|
|
bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg);
|
|
|
|
bgx_flush_dmac_addrs(bgx, lmacid);
|
|
|
|
if ((lmac->lmac_type != BGX_MODE_XFI) &&
|
|
(lmac->lmac_type != BGX_MODE_XLAUI) &&
|
|
(lmac->lmac_type != BGX_MODE_40G_KR) &&
|
|
(lmac->lmac_type != BGX_MODE_10G_KR) && lmac->phydev)
|
|
phy_disconnect(lmac->phydev);
|
|
|
|
lmac->phydev = NULL;
|
|
}
|
|
|
|
static void bgx_init_hw(struct bgx *bgx)
|
|
{
|
|
int i;
|
|
struct lmac *lmac;
|
|
|
|
bgx_reg_modify(bgx, 0, BGX_CMR_GLOBAL_CFG, CMR_GLOBAL_CFG_FCS_STRIP);
|
|
if (bgx_reg_read(bgx, 0, BGX_CMR_BIST_STATUS))
|
|
dev_err(&bgx->pdev->dev, "BGX%d BIST failed\n", bgx->bgx_id);
|
|
|
|
/* Set lmac type and lane2serdes mapping */
|
|
for (i = 0; i < bgx->lmac_count; i++) {
|
|
lmac = &bgx->lmac[i];
|
|
bgx_reg_write(bgx, i, BGX_CMRX_CFG,
|
|
(lmac->lmac_type << 8) | lmac->lane_to_sds);
|
|
bgx->lmac[i].lmacid_bd = lmac_count;
|
|
lmac_count++;
|
|
}
|
|
|
|
bgx_reg_write(bgx, 0, BGX_CMR_TX_LMACS, bgx->lmac_count);
|
|
bgx_reg_write(bgx, 0, BGX_CMR_RX_LMACS, bgx->lmac_count);
|
|
|
|
/* Set the backpressure AND mask */
|
|
for (i = 0; i < bgx->lmac_count; i++)
|
|
bgx_reg_modify(bgx, 0, BGX_CMR_CHAN_MSK_AND,
|
|
((1ULL << MAX_BGX_CHANS_PER_LMAC) - 1) <<
|
|
(i * MAX_BGX_CHANS_PER_LMAC));
|
|
|
|
/* Disable all MAC filtering */
|
|
for (i = 0; i < RX_DMAC_COUNT; i++)
|
|
bgx_reg_write(bgx, 0, BGX_CMR_RX_DMACX_CAM + (i * 8), 0x00);
|
|
|
|
/* Disable MAC steering (NCSI traffic) */
|
|
for (i = 0; i < RX_TRAFFIC_STEER_RULE_COUNT; i++)
|
|
bgx_reg_write(bgx, 0, BGX_CMR_RX_STREERING + (i * 8), 0x00);
|
|
}
|
|
|
|
static u8 bgx_get_lane2sds_cfg(struct bgx *bgx, struct lmac *lmac)
|
|
{
|
|
return (u8)(bgx_reg_read(bgx, lmac->lmacid, BGX_CMRX_CFG) & 0xFF);
|
|
}
|
|
|
|
static void bgx_print_qlm_mode(struct bgx *bgx, u8 lmacid)
|
|
{
|
|
struct device *dev = &bgx->pdev->dev;
|
|
struct lmac *lmac;
|
|
char str[20];
|
|
|
|
if (!bgx->is_dlm && lmacid)
|
|
return;
|
|
|
|
lmac = &bgx->lmac[lmacid];
|
|
if (!bgx->is_dlm)
|
|
sprintf(str, "BGX%d QLM mode", bgx->bgx_id);
|
|
else
|
|
sprintf(str, "BGX%d LMAC%d mode", bgx->bgx_id, lmacid);
|
|
|
|
switch (lmac->lmac_type) {
|
|
case BGX_MODE_SGMII:
|
|
dev_info(dev, "%s: SGMII\n", (char *)str);
|
|
break;
|
|
case BGX_MODE_XAUI:
|
|
dev_info(dev, "%s: XAUI\n", (char *)str);
|
|
break;
|
|
case BGX_MODE_RXAUI:
|
|
dev_info(dev, "%s: RXAUI\n", (char *)str);
|
|
break;
|
|
case BGX_MODE_XFI:
|
|
if (!lmac->use_training)
|
|
dev_info(dev, "%s: XFI\n", (char *)str);
|
|
else
|
|
dev_info(dev, "%s: 10G_KR\n", (char *)str);
|
|
break;
|
|
case BGX_MODE_XLAUI:
|
|
if (!lmac->use_training)
|
|
dev_info(dev, "%s: XLAUI\n", (char *)str);
|
|
else
|
|
dev_info(dev, "%s: 40G_KR4\n", (char *)str);
|
|
break;
|
|
case BGX_MODE_QSGMII:
|
|
dev_info(dev, "%s: QSGMII\n", (char *)str);
|
|
break;
|
|
case BGX_MODE_RGMII:
|
|
dev_info(dev, "%s: RGMII\n", (char *)str);
|
|
break;
|
|
case BGX_MODE_INVALID:
|
|
/* Nothing to do */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void lmac_set_lane2sds(struct bgx *bgx, struct lmac *lmac)
|
|
{
|
|
switch (lmac->lmac_type) {
|
|
case BGX_MODE_SGMII:
|
|
case BGX_MODE_XFI:
|
|
lmac->lane_to_sds = lmac->lmacid;
|
|
break;
|
|
case BGX_MODE_XAUI:
|
|
case BGX_MODE_XLAUI:
|
|
case BGX_MODE_RGMII:
|
|
lmac->lane_to_sds = 0xE4;
|
|
break;
|
|
case BGX_MODE_RXAUI:
|
|
lmac->lane_to_sds = (lmac->lmacid) ? 0xE : 0x4;
|
|
break;
|
|
case BGX_MODE_QSGMII:
|
|
/* There is no way to determine if DLM0/2 is QSGMII or
|
|
* DLM1/3 is configured to QSGMII as bootloader will
|
|
* configure all LMACs, so take whatever is configured
|
|
* by low level firmware.
|
|
*/
|
|
lmac->lane_to_sds = bgx_get_lane2sds_cfg(bgx, lmac);
|
|
break;
|
|
default:
|
|
lmac->lane_to_sds = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void lmac_set_training(struct bgx *bgx, struct lmac *lmac, int lmacid)
|
|
{
|
|
if ((lmac->lmac_type != BGX_MODE_10G_KR) &&
|
|
(lmac->lmac_type != BGX_MODE_40G_KR)) {
|
|
lmac->use_training = 0;
|
|
return;
|
|
}
|
|
|
|
lmac->use_training = bgx_reg_read(bgx, lmacid, BGX_SPUX_BR_PMD_CRTL) &
|
|
SPU_PMD_CRTL_TRAIN_EN;
|
|
}
|
|
|
|
static void bgx_set_lmac_config(struct bgx *bgx, u8 idx)
|
|
{
|
|
struct lmac *lmac;
|
|
u64 cmr_cfg;
|
|
u8 lmac_type;
|
|
u8 lane_to_sds;
|
|
|
|
lmac = &bgx->lmac[idx];
|
|
|
|
if (!bgx->is_dlm || bgx->is_rgx) {
|
|
/* Read LMAC0 type to figure out QLM mode
|
|
* This is configured by low level firmware
|
|
*/
|
|
cmr_cfg = bgx_reg_read(bgx, 0, BGX_CMRX_CFG);
|
|
lmac->lmac_type = (cmr_cfg >> 8) & 0x07;
|
|
if (bgx->is_rgx)
|
|
lmac->lmac_type = BGX_MODE_RGMII;
|
|
lmac_set_training(bgx, lmac, 0);
|
|
lmac_set_lane2sds(bgx, lmac);
|
|
return;
|
|
}
|
|
|
|
/* For DLMs or SLMs on 80/81/83xx so many lane configurations
|
|
* are possible and vary across boards. Also Kernel doesn't have
|
|
* any way to identify board type/info and since firmware does,
|
|
* just take lmac type and serdes lane config as is.
|
|
*/
|
|
cmr_cfg = bgx_reg_read(bgx, idx, BGX_CMRX_CFG);
|
|
lmac_type = (u8)((cmr_cfg >> 8) & 0x07);
|
|
lane_to_sds = (u8)(cmr_cfg & 0xFF);
|
|
/* Check if config is reset value */
|
|
if ((lmac_type == 0) && (lane_to_sds == 0xE4))
|
|
lmac->lmac_type = BGX_MODE_INVALID;
|
|
else
|
|
lmac->lmac_type = lmac_type;
|
|
lmac->lane_to_sds = lane_to_sds;
|
|
lmac_set_training(bgx, lmac, lmac->lmacid);
|
|
}
|
|
|
|
static void bgx_get_qlm_mode(struct bgx *bgx)
|
|
{
|
|
struct lmac *lmac;
|
|
u8 idx;
|
|
|
|
/* Init all LMAC's type to invalid */
|
|
for (idx = 0; idx < bgx->max_lmac; idx++) {
|
|
lmac = &bgx->lmac[idx];
|
|
lmac->lmacid = idx;
|
|
lmac->lmac_type = BGX_MODE_INVALID;
|
|
lmac->use_training = false;
|
|
}
|
|
|
|
/* It is assumed that low level firmware sets this value */
|
|
bgx->lmac_count = bgx_reg_read(bgx, 0, BGX_CMR_RX_LMACS) & 0x7;
|
|
if (bgx->lmac_count > bgx->max_lmac)
|
|
bgx->lmac_count = bgx->max_lmac;
|
|
|
|
for (idx = 0; idx < bgx->lmac_count; idx++) {
|
|
bgx_set_lmac_config(bgx, idx);
|
|
bgx_print_qlm_mode(bgx, idx);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
|
|
static int acpi_get_mac_address(struct device *dev, struct acpi_device *adev,
|
|
u8 *dst)
|
|
{
|
|
u8 mac[ETH_ALEN];
|
|
int ret;
|
|
|
|
ret = fwnode_property_read_u8_array(acpi_fwnode_handle(adev),
|
|
"mac-address", mac, ETH_ALEN);
|
|
if (ret)
|
|
goto out;
|
|
|
|
if (!is_valid_ether_addr(mac)) {
|
|
dev_err(dev, "MAC address invalid: %pM\n", mac);
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
dev_info(dev, "MAC address set to: %pM\n", mac);
|
|
|
|
memcpy(dst, mac, ETH_ALEN);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/* Currently only sets the MAC address. */
|
|
static acpi_status bgx_acpi_register_phy(acpi_handle handle,
|
|
u32 lvl, void *context, void **rv)
|
|
{
|
|
struct bgx *bgx = context;
|
|
struct device *dev = &bgx->pdev->dev;
|
|
struct acpi_device *adev;
|
|
|
|
if (acpi_bus_get_device(handle, &adev))
|
|
goto out;
|
|
|
|
acpi_get_mac_address(dev, adev, bgx->lmac[bgx->acpi_lmac_idx].mac);
|
|
|
|
SET_NETDEV_DEV(&bgx->lmac[bgx->acpi_lmac_idx].netdev, dev);
|
|
|
|
bgx->lmac[bgx->acpi_lmac_idx].lmacid = bgx->acpi_lmac_idx;
|
|
bgx->acpi_lmac_idx++; /* move to next LMAC */
|
|
out:
|
|
return AE_OK;
|
|
}
|
|
|
|
static acpi_status bgx_acpi_match_id(acpi_handle handle, u32 lvl,
|
|
void *context, void **ret_val)
|
|
{
|
|
struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
|
|
struct bgx *bgx = context;
|
|
char bgx_sel[5];
|
|
|
|
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
|
|
if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &string))) {
|
|
pr_warn("Invalid link device\n");
|
|
return AE_OK;
|
|
}
|
|
|
|
if (strncmp(string.pointer, bgx_sel, 4))
|
|
return AE_OK;
|
|
|
|
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
|
|
bgx_acpi_register_phy, NULL, bgx, NULL);
|
|
|
|
kfree(string.pointer);
|
|
return AE_CTRL_TERMINATE;
|
|
}
|
|
|
|
static int bgx_init_acpi_phy(struct bgx *bgx)
|
|
{
|
|
acpi_get_devices(NULL, bgx_acpi_match_id, bgx, (void **)NULL);
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
|
|
static int bgx_init_acpi_phy(struct bgx *bgx)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
#endif /* CONFIG_ACPI */
|
|
|
|
#if IS_ENABLED(CONFIG_OF_MDIO)
|
|
|
|
static int bgx_init_of_phy(struct bgx *bgx)
|
|
{
|
|
struct fwnode_handle *fwn;
|
|
struct device_node *node = NULL;
|
|
u8 lmac = 0;
|
|
|
|
device_for_each_child_node(&bgx->pdev->dev, fwn) {
|
|
struct phy_device *pd;
|
|
struct device_node *phy_np;
|
|
const char *mac;
|
|
|
|
/* Should always be an OF node. But if it is not, we
|
|
* cannot handle it, so exit the loop.
|
|
*/
|
|
node = to_of_node(fwn);
|
|
if (!node)
|
|
break;
|
|
|
|
mac = of_get_mac_address(node);
|
|
if (mac)
|
|
ether_addr_copy(bgx->lmac[lmac].mac, mac);
|
|
|
|
SET_NETDEV_DEV(&bgx->lmac[lmac].netdev, &bgx->pdev->dev);
|
|
bgx->lmac[lmac].lmacid = lmac;
|
|
|
|
phy_np = of_parse_phandle(node, "phy-handle", 0);
|
|
/* If there is no phy or defective firmware presents
|
|
* this cortina phy, for which there is no driver
|
|
* support, ignore it.
|
|
*/
|
|
if (phy_np &&
|
|
!of_device_is_compatible(phy_np, "cortina,cs4223-slice")) {
|
|
/* Wait until the phy drivers are available */
|
|
pd = of_phy_find_device(phy_np);
|
|
if (!pd)
|
|
goto defer;
|
|
bgx->lmac[lmac].phydev = pd;
|
|
}
|
|
|
|
lmac++;
|
|
if (lmac == bgx->max_lmac) {
|
|
of_node_put(node);
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
defer:
|
|
/* We are bailing out, try not to leak device reference counts
|
|
* for phy devices we may have already found.
|
|
*/
|
|
while (lmac) {
|
|
if (bgx->lmac[lmac].phydev) {
|
|
put_device(&bgx->lmac[lmac].phydev->mdio.dev);
|
|
bgx->lmac[lmac].phydev = NULL;
|
|
}
|
|
lmac--;
|
|
}
|
|
of_node_put(node);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
#else
|
|
|
|
static int bgx_init_of_phy(struct bgx *bgx)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
#endif /* CONFIG_OF_MDIO */
|
|
|
|
static int bgx_init_phy(struct bgx *bgx)
|
|
{
|
|
if (!acpi_disabled)
|
|
return bgx_init_acpi_phy(bgx);
|
|
|
|
return bgx_init_of_phy(bgx);
|
|
}
|
|
|
|
static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
int err;
|
|
struct device *dev = &pdev->dev;
|
|
struct bgx *bgx = NULL;
|
|
u8 lmac;
|
|
u16 sdevid;
|
|
|
|
bgx = devm_kzalloc(dev, sizeof(*bgx), GFP_KERNEL);
|
|
if (!bgx)
|
|
return -ENOMEM;
|
|
bgx->pdev = pdev;
|
|
|
|
pci_set_drvdata(pdev, bgx);
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
dev_err(dev, "Failed to enable PCI device\n");
|
|
pci_set_drvdata(pdev, NULL);
|
|
return err;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRV_NAME);
|
|
if (err) {
|
|
dev_err(dev, "PCI request regions failed 0x%x\n", err);
|
|
goto err_disable_device;
|
|
}
|
|
|
|
/* MAP configuration registers */
|
|
bgx->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0);
|
|
if (!bgx->reg_base) {
|
|
dev_err(dev, "BGX: Cannot map CSR memory space, aborting\n");
|
|
err = -ENOMEM;
|
|
goto err_release_regions;
|
|
}
|
|
|
|
set_max_bgx_per_node(pdev);
|
|
|
|
pci_read_config_word(pdev, PCI_DEVICE_ID, &sdevid);
|
|
if (sdevid != PCI_DEVICE_ID_THUNDER_RGX) {
|
|
bgx->bgx_id = (pci_resource_start(pdev,
|
|
PCI_CFG_REG_BAR_NUM) >> 24) & BGX_ID_MASK;
|
|
bgx->bgx_id += nic_get_node_id(pdev) * max_bgx_per_node;
|
|
bgx->max_lmac = MAX_LMAC_PER_BGX;
|
|
bgx_vnic[bgx->bgx_id] = bgx;
|
|
} else {
|
|
bgx->is_rgx = true;
|
|
bgx->max_lmac = 1;
|
|
bgx->bgx_id = MAX_BGX_PER_CN81XX - 1;
|
|
bgx_vnic[bgx->bgx_id] = bgx;
|
|
xcv_init_hw();
|
|
}
|
|
|
|
/* On 81xx all are DLMs and on 83xx there are 3 BGX QLMs and one
|
|
* BGX i.e BGX2 can be split across 2 DLMs.
|
|
*/
|
|
pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &sdevid);
|
|
if ((sdevid == PCI_SUBSYS_DEVID_81XX_BGX) ||
|
|
((sdevid == PCI_SUBSYS_DEVID_83XX_BGX) && (bgx->bgx_id == 2)))
|
|
bgx->is_dlm = true;
|
|
|
|
bgx_get_qlm_mode(bgx);
|
|
|
|
err = bgx_init_phy(bgx);
|
|
if (err)
|
|
goto err_enable;
|
|
|
|
bgx_init_hw(bgx);
|
|
|
|
/* Enable all LMACs */
|
|
for (lmac = 0; lmac < bgx->lmac_count; lmac++) {
|
|
err = bgx_lmac_enable(bgx, lmac);
|
|
if (err) {
|
|
dev_err(dev, "BGX%d failed to enable lmac%d\n",
|
|
bgx->bgx_id, lmac);
|
|
while (lmac)
|
|
bgx_lmac_disable(bgx, --lmac);
|
|
goto err_enable;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_enable:
|
|
bgx_vnic[bgx->bgx_id] = NULL;
|
|
err_release_regions:
|
|
pci_release_regions(pdev);
|
|
err_disable_device:
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
return err;
|
|
}
|
|
|
|
static void bgx_remove(struct pci_dev *pdev)
|
|
{
|
|
struct bgx *bgx = pci_get_drvdata(pdev);
|
|
u8 lmac;
|
|
|
|
/* Disable all LMACs */
|
|
for (lmac = 0; lmac < bgx->lmac_count; lmac++)
|
|
bgx_lmac_disable(bgx, lmac);
|
|
|
|
bgx_vnic[bgx->bgx_id] = NULL;
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
static struct pci_driver bgx_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = bgx_id_table,
|
|
.probe = bgx_probe,
|
|
.remove = bgx_remove,
|
|
};
|
|
|
|
static int __init bgx_init_module(void)
|
|
{
|
|
pr_info("%s, ver %s\n", DRV_NAME, DRV_VERSION);
|
|
|
|
return pci_register_driver(&bgx_driver);
|
|
}
|
|
|
|
static void __exit bgx_cleanup_module(void)
|
|
{
|
|
pci_unregister_driver(&bgx_driver);
|
|
}
|
|
|
|
module_init(bgx_init_module);
|
|
module_exit(bgx_cleanup_module);
|