linux/drivers/net/dsa/bcm_sf2_cfp.c

614 lines
15 KiB
C

/*
* Broadcom Starfighter 2 DSA switch CFP support
*
* Copyright (C) 2016, Broadcom
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/list.h>
#include <net/dsa.h>
#include <linux/ethtool.h>
#include <linux/if_ether.h>
#include <linux/in.h>
#include <linux/bitmap.h>
#include "bcm_sf2.h"
#include "bcm_sf2_regs.h"
struct cfp_udf_layout {
u8 slices[UDF_NUM_SLICES];
u32 mask_value;
};
/* UDF slices layout for a TCPv4/UDPv4 specification */
static const struct cfp_udf_layout udf_tcpip4_layout = {
.slices = {
/* End of L2, byte offset 12, src IP[0:15] */
CFG_UDF_EOL2 | 6,
/* End of L2, byte offset 14, src IP[16:31] */
CFG_UDF_EOL2 | 7,
/* End of L2, byte offset 16, dst IP[0:15] */
CFG_UDF_EOL2 | 8,
/* End of L2, byte offset 18, dst IP[16:31] */
CFG_UDF_EOL2 | 9,
/* End of L3, byte offset 0, src port */
CFG_UDF_EOL3 | 0,
/* End of L3, byte offset 2, dst port */
CFG_UDF_EOL3 | 1,
0, 0, 0
},
.mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG,
};
static inline unsigned int bcm_sf2_get_num_udf_slices(const u8 *layout)
{
unsigned int i, count = 0;
for (i = 0; i < UDF_NUM_SLICES; i++) {
if (layout[i] != 0)
count++;
}
return count;
}
static void bcm_sf2_cfp_udf_set(struct bcm_sf2_priv *priv,
unsigned int slice_num,
const u8 *layout)
{
u32 offset = CORE_UDF_0_A_0_8_PORT_0 + slice_num * UDF_SLICE_OFFSET;
unsigned int i;
for (i = 0; i < UDF_NUM_SLICES; i++)
core_writel(priv, layout[i], offset + i * 4);
}
static int bcm_sf2_cfp_op(struct bcm_sf2_priv *priv, unsigned int op)
{
unsigned int timeout = 1000;
u32 reg;
reg = core_readl(priv, CORE_CFP_ACC);
reg &= ~(OP_SEL_MASK | RAM_SEL_MASK);
reg |= OP_STR_DONE | op;
core_writel(priv, reg, CORE_CFP_ACC);
do {
reg = core_readl(priv, CORE_CFP_ACC);
if (!(reg & OP_STR_DONE))
break;
cpu_relax();
} while (timeout--);
if (!timeout)
return -ETIMEDOUT;
return 0;
}
static inline void bcm_sf2_cfp_rule_addr_set(struct bcm_sf2_priv *priv,
unsigned int addr)
{
u32 reg;
WARN_ON(addr >= CFP_NUM_RULES);
reg = core_readl(priv, CORE_CFP_ACC);
reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT);
reg |= addr << XCESS_ADDR_SHIFT;
core_writel(priv, reg, CORE_CFP_ACC);
}
static inline unsigned int bcm_sf2_cfp_rule_size(struct bcm_sf2_priv *priv)
{
/* Entry #0 is reserved */
return CFP_NUM_RULES - 1;
}
static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
struct ethtool_rx_flow_spec *fs)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_tcpip4_spec *v4_spec;
const struct cfp_udf_layout *layout;
unsigned int slice_num, rule_index;
unsigned int queue_num, port_num;
u8 ip_proto, ip_frag;
u8 num_udf;
u32 reg;
int ret;
/* Check for unsupported extensions */
if ((fs->flow_type & FLOW_EXT) &&
(fs->m_ext.vlan_etype || fs->m_ext.data[1]))
return -EINVAL;
if (fs->location != RX_CLS_LOC_ANY &&
test_bit(fs->location, priv->cfp.used))
return -EBUSY;
if (fs->location != RX_CLS_LOC_ANY &&
fs->location > bcm_sf2_cfp_rule_size(priv))
return -EINVAL;
ip_frag = be32_to_cpu(fs->m_ext.data[0]);
/* We do not support discarding packets, check that the
* destination port is enabled and that we are within the
* number of ports supported by the switch
*/
port_num = fs->ring_cookie / 8;
if (fs->ring_cookie == RX_CLS_FLOW_DISC ||
!(BIT(port_num) & ds->enabled_port_mask) ||
port_num >= priv->hw_params.num_ports)
return -EINVAL;
switch (fs->flow_type & ~FLOW_EXT) {
case TCP_V4_FLOW:
ip_proto = IPPROTO_TCP;
v4_spec = &fs->h_u.tcp_ip4_spec;
break;
case UDP_V4_FLOW:
ip_proto = IPPROTO_UDP;
v4_spec = &fs->h_u.udp_ip4_spec;
break;
default:
return -EINVAL;
}
/* We only use one UDF slice for now */
slice_num = 1;
layout = &udf_tcpip4_layout;
num_udf = bcm_sf2_get_num_udf_slices(layout->slices);
/* Apply the UDF layout for this filter */
bcm_sf2_cfp_udf_set(priv, slice_num, layout->slices);
/* Apply to all packets received through this port */
core_writel(priv, BIT(port), CORE_CFP_DATA_PORT(7));
/* S-Tag status [31:30]
* C-Tag status [29:28]
* L2 framing [27:26]
* L3 framing [25:24]
* IP ToS [23:16]
* IP proto [15:08]
* IP Fragm [7]
* Non 1st frag [6]
* IP Authen [5]
* TTL range [4:3]
* PPPoE session [2]
* Reserved [1]
* UDF_Valid[8] [0]
*/
core_writel(priv, v4_spec->tos << 16 | ip_proto << 8 | ip_frag << 7,
CORE_CFP_DATA_PORT(6));
/* UDF_Valid[7:0] [31:24]
* S-Tag [23:8]
* C-Tag [7:0]
*/
core_writel(priv, GENMASK(num_udf - 1, 0) << 24, CORE_CFP_DATA_PORT(5));
/* C-Tag [31:24]
* UDF_n_A8 [23:8]
* UDF_n_A7 [7:0]
*/
core_writel(priv, 0, CORE_CFP_DATA_PORT(4));
/* UDF_n_A7 [31:24]
* UDF_n_A6 [23:8]
* UDF_n_A5 [7:0]
*/
core_writel(priv, be16_to_cpu(v4_spec->pdst) >> 8,
CORE_CFP_DATA_PORT(3));
/* UDF_n_A5 [31:24]
* UDF_n_A4 [23:8]
* UDF_n_A3 [7:0]
*/
reg = (be16_to_cpu(v4_spec->pdst) & 0xff) << 24 |
(u32)be16_to_cpu(v4_spec->psrc) << 8 |
(be32_to_cpu(v4_spec->ip4dst) & 0x0000ff00) >> 8;
core_writel(priv, reg, CORE_CFP_DATA_PORT(2));
/* UDF_n_A3 [31:24]
* UDF_n_A2 [23:8]
* UDF_n_A1 [7:0]
*/
reg = (u32)(be32_to_cpu(v4_spec->ip4dst) & 0xff) << 24 |
(u32)(be32_to_cpu(v4_spec->ip4dst) >> 16) << 8 |
(be32_to_cpu(v4_spec->ip4src) & 0x0000ff00) >> 8;
core_writel(priv, reg, CORE_CFP_DATA_PORT(1));
/* UDF_n_A1 [31:24]
* UDF_n_A0 [23:8]
* Reserved [7:4]
* Slice ID [3:2]
* Slice valid [1:0]
*/
reg = (u32)(be32_to_cpu(v4_spec->ip4src) & 0xff) << 24 |
(u32)(be32_to_cpu(v4_spec->ip4src) >> 16) << 8 |
SLICE_NUM(slice_num) | SLICE_VALID;
core_writel(priv, reg, CORE_CFP_DATA_PORT(0));
/* Source port map match */
core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7));
/* Mask with the specific layout for IPv4 packets */
core_writel(priv, layout->mask_value, CORE_CFP_MASK_PORT(6));
/* Mask all but valid UDFs */
core_writel(priv, GENMASK(num_udf - 1, 0) << 24, CORE_CFP_MASK_PORT(5));
/* Mask all */
core_writel(priv, 0, CORE_CFP_MASK_PORT(4));
/* All other UDFs should be matched with the filter */
core_writel(priv, 0xff, CORE_CFP_MASK_PORT(3));
core_writel(priv, 0xffffffff, CORE_CFP_MASK_PORT(2));
core_writel(priv, 0xffffffff, CORE_CFP_MASK_PORT(1));
core_writel(priv, 0xffffff0f, CORE_CFP_MASK_PORT(0));
/* Locate the first rule available */
if (fs->location == RX_CLS_LOC_ANY)
rule_index = find_first_zero_bit(priv->cfp.used,
bcm_sf2_cfp_rule_size(priv));
else
rule_index = fs->location;
/* Insert into TCAM now */
bcm_sf2_cfp_rule_addr_set(priv, rule_index);
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret) {
pr_err("TCAM entry at addr %d failed\n", rule_index);
return ret;
}
/* Replace ARL derived destination with DST_MAP derived, define
* which port and queue this should be forwarded to.
*
* We have a small oddity where Port 6 just does not have a
* valid bit here (so we subtract by one).
*/
queue_num = fs->ring_cookie % 8;
if (port_num >= 7)
port_num -= 1;
reg = CHANGE_FWRD_MAP_IB_REP_ARL | BIT(port_num + DST_MAP_IB_SHIFT) |
CHANGE_TC | queue_num << NEW_TC_SHIFT;
core_writel(priv, reg, CORE_ACT_POL_DATA0);
/* Set classification ID that needs to be put in Broadcom tag */
core_writel(priv, rule_index << CHAIN_ID_SHIFT,
CORE_ACT_POL_DATA1);
core_writel(priv, 0, CORE_ACT_POL_DATA2);
/* Configure policer RAM now */
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | ACT_POL_RAM);
if (ret) {
pr_err("Policer entry at %d failed\n", rule_index);
return ret;
}
/* Disable the policer */
core_writel(priv, POLICER_MODE_DISABLE, CORE_RATE_METER0);
/* Now the rate meter */
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | RATE_METER_RAM);
if (ret) {
pr_err("Meter entry at %d failed\n", rule_index);
return ret;
}
/* Turn on CFP for this rule now */
reg = core_readl(priv, CORE_CFP_CTL_REG);
reg |= BIT(port);
core_writel(priv, reg, CORE_CFP_CTL_REG);
/* Flag the rule as being used and return it */
set_bit(rule_index, priv->cfp.used);
fs->location = rule_index;
return 0;
}
static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port,
u32 loc)
{
int ret;
u32 reg;
/* Refuse deletion of unused rules, and the default reserved rule */
if (!test_bit(loc, priv->cfp.used) || loc == 0)
return -EINVAL;
/* Indicate which rule we want to read */
bcm_sf2_cfp_rule_addr_set(priv, loc);
ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL);
if (ret)
return ret;
/* Clear its valid bits */
reg = core_readl(priv, CORE_CFP_DATA_PORT(0));
reg &= ~SLICE_VALID;
core_writel(priv, reg, CORE_CFP_DATA_PORT(0));
/* Write back this entry into the TCAM now */
ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
if (ret)
return ret;
clear_bit(loc, priv->cfp.used);
return 0;
}
static void bcm_sf2_invert_masks(struct ethtool_rx_flow_spec *flow)
{
unsigned int i;
for (i = 0; i < sizeof(flow->m_u); i++)
flow->m_u.hdata[i] ^= 0xff;
flow->m_ext.vlan_etype ^= cpu_to_be16(~0);
flow->m_ext.vlan_tci ^= cpu_to_be16(~0);
flow->m_ext.data[0] ^= cpu_to_be32(~0);
flow->m_ext.data[1] ^= cpu_to_be32(~0);
}
static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port,
struct ethtool_rxnfc *nfc, bool search)
{
struct ethtool_tcpip4_spec *v4_spec;
unsigned int queue_num;
u16 src_dst_port;
u32 reg, ipv4;
int ret;
if (!search) {
bcm_sf2_cfp_rule_addr_set(priv, nfc->fs.location);
ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | ACT_POL_RAM);
if (ret)
return ret;
reg = core_readl(priv, CORE_ACT_POL_DATA0);
ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL);
if (ret)
return ret;
} else {
reg = core_readl(priv, CORE_ACT_POL_DATA0);
}
/* Extract the destination port */
nfc->fs.ring_cookie = fls((reg >> DST_MAP_IB_SHIFT) &
DST_MAP_IB_MASK) - 1;
/* There is no Port 6, so we compensate for that here */
if (nfc->fs.ring_cookie >= 6)
nfc->fs.ring_cookie++;
nfc->fs.ring_cookie *= 8;
/* Extract the destination queue */
queue_num = (reg >> NEW_TC_SHIFT) & NEW_TC_MASK;
nfc->fs.ring_cookie += queue_num;
/* Extract the IP protocol */
reg = core_readl(priv, CORE_CFP_DATA_PORT(6));
switch ((reg & IPPROTO_MASK) >> IPPROTO_SHIFT) {
case IPPROTO_TCP:
nfc->fs.flow_type = TCP_V4_FLOW;
v4_spec = &nfc->fs.h_u.tcp_ip4_spec;
break;
case IPPROTO_UDP:
nfc->fs.flow_type = UDP_V4_FLOW;
v4_spec = &nfc->fs.h_u.udp_ip4_spec;
break;
default:
/* Clear to exit the search process */
if (search)
core_readl(priv, CORE_CFP_DATA_PORT(7));
return -EINVAL;
}
v4_spec->tos = (reg >> 16) & IPPROTO_MASK;
nfc->fs.m_ext.data[0] = cpu_to_be32((reg >> 7) & 1);
reg = core_readl(priv, CORE_CFP_DATA_PORT(3));
/* src port [15:8] */
src_dst_port = reg << 8;
reg = core_readl(priv, CORE_CFP_DATA_PORT(2));
/* src port [7:0] */
src_dst_port |= (reg >> 24);
v4_spec->pdst = cpu_to_be16(src_dst_port);
nfc->fs.m_u.tcp_ip4_spec.pdst = cpu_to_be16(~0);
v4_spec->psrc = cpu_to_be16((u16)(reg >> 8));
nfc->fs.m_u.tcp_ip4_spec.psrc = cpu_to_be16(~0);
/* IPv4 dst [15:8] */
ipv4 = (reg & 0xff) << 8;
reg = core_readl(priv, CORE_CFP_DATA_PORT(1));
/* IPv4 dst [31:16] */
ipv4 |= ((reg >> 8) & 0xffff) << 16;
/* IPv4 dst [7:0] */
ipv4 |= (reg >> 24) & 0xff;
v4_spec->ip4dst = cpu_to_be32(ipv4);
nfc->fs.m_u.tcp_ip4_spec.ip4dst = cpu_to_be32(~0);
/* IPv4 src [15:8] */
ipv4 = (reg & 0xff) << 8;
reg = core_readl(priv, CORE_CFP_DATA_PORT(0));
if (!(reg & SLICE_VALID))
return -EINVAL;
/* IPv4 src [7:0] */
ipv4 |= (reg >> 24) & 0xff;
/* IPv4 src [31:16] */
ipv4 |= ((reg >> 8) & 0xffff) << 16;
v4_spec->ip4src = cpu_to_be32(ipv4);
nfc->fs.m_u.tcp_ip4_spec.ip4src = cpu_to_be32(~0);
/* Read last to avoid next entry clobbering the results during search
* operations
*/
reg = core_readl(priv, CORE_CFP_DATA_PORT(7));
if (!(reg & 1 << port))
return -EINVAL;
bcm_sf2_invert_masks(&nfc->fs);
/* Put the TCAM size here */
nfc->data = bcm_sf2_cfp_rule_size(priv);
return 0;
}
/* We implement the search doing a TCAM search operation */
static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv,
int port, struct ethtool_rxnfc *nfc,
u32 *rule_locs)
{
unsigned int index = 1, rules_cnt = 0;
int ret;
u32 reg;
/* Do not poll on OP_STR_DONE to be self-clearing for search
* operations, we cannot use bcm_sf2_cfp_op here because it completes
* on clearing OP_STR_DONE which won't clear until the entire search
* operation is over.
*/
reg = core_readl(priv, CORE_CFP_ACC);
reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT);
reg |= index << XCESS_ADDR_SHIFT;
reg &= ~(OP_SEL_MASK | RAM_SEL_MASK);
reg |= OP_SEL_SEARCH | TCAM_SEL | OP_STR_DONE;
core_writel(priv, reg, CORE_CFP_ACC);
do {
/* Wait for results to be ready */
reg = core_readl(priv, CORE_CFP_ACC);
/* Extract the address we are searching */
index = reg >> XCESS_ADDR_SHIFT;
index &= XCESS_ADDR_MASK;
/* We have a valid search result, so flag it accordingly */
if (reg & SEARCH_STS) {
ret = bcm_sf2_cfp_rule_get(priv, port, nfc, true);
if (ret)
continue;
rule_locs[rules_cnt] = index;
rules_cnt++;
}
/* Search is over break out */
if (!(reg & OP_STR_DONE))
break;
} while (index < CFP_NUM_RULES);
/* Put the TCAM size here */
nfc->data = bcm_sf2_cfp_rule_size(priv);
nfc->rule_cnt = rules_cnt;
return 0;
}
int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
struct ethtool_rxnfc *nfc, u32 *rule_locs)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
int ret = 0;
mutex_lock(&priv->cfp.lock);
switch (nfc->cmd) {
case ETHTOOL_GRXCLSRLCNT:
/* Subtract the default, unusable rule */
nfc->rule_cnt = bitmap_weight(priv->cfp.used,
CFP_NUM_RULES) - 1;
/* We support specifying rule locations */
nfc->data |= RX_CLS_LOC_SPECIAL;
break;
case ETHTOOL_GRXCLSRULE:
ret = bcm_sf2_cfp_rule_get(priv, port, nfc, false);
break;
case ETHTOOL_GRXCLSRLALL:
ret = bcm_sf2_cfp_rule_get_all(priv, port, nfc, rule_locs);
break;
default:
ret = -EOPNOTSUPP;
break;
}
mutex_unlock(&priv->cfp.lock);
return ret;
}
int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port,
struct ethtool_rxnfc *nfc)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
int ret = 0;
mutex_lock(&priv->cfp.lock);
switch (nfc->cmd) {
case ETHTOOL_SRXCLSRLINS:
ret = bcm_sf2_cfp_rule_set(ds, port, &nfc->fs);
break;
case ETHTOOL_SRXCLSRLDEL:
ret = bcm_sf2_cfp_rule_del(priv, port, nfc->fs.location);
break;
default:
ret = -EOPNOTSUPP;
break;
}
mutex_unlock(&priv->cfp.lock);
return ret;
}
int bcm_sf2_cfp_rst(struct bcm_sf2_priv *priv)
{
unsigned int timeout = 1000;
u32 reg;
reg = core_readl(priv, CORE_CFP_ACC);
reg |= TCAM_RESET;
core_writel(priv, reg, CORE_CFP_ACC);
do {
reg = core_readl(priv, CORE_CFP_ACC);
if (!(reg & TCAM_RESET))
break;
cpu_relax();
} while (timeout--);
if (!timeout)
return -ETIMEDOUT;
return 0;
}