mirror of https://gitee.com/openkylin/linux.git
616 lines
15 KiB
C
616 lines
15 KiB
C
/*
|
|
* Driver for the Atmel on-chip Audio Bitstream DAC (ABDAC)
|
|
*
|
|
* Copyright (C) 2006-2009 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/bitmap.h>
|
|
#include <linux/dw_dmac.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/types.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/atmel-abdac.h>
|
|
|
|
/* DAC register offsets */
|
|
#define DAC_DATA 0x0000
|
|
#define DAC_CTRL 0x0008
|
|
#define DAC_INT_MASK 0x000c
|
|
#define DAC_INT_EN 0x0010
|
|
#define DAC_INT_DIS 0x0014
|
|
#define DAC_INT_CLR 0x0018
|
|
#define DAC_INT_STATUS 0x001c
|
|
|
|
/* Bitfields in CTRL */
|
|
#define DAC_SWAP_OFFSET 30
|
|
#define DAC_SWAP_SIZE 1
|
|
#define DAC_EN_OFFSET 31
|
|
#define DAC_EN_SIZE 1
|
|
|
|
/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
|
|
#define DAC_UNDERRUN_OFFSET 28
|
|
#define DAC_UNDERRUN_SIZE 1
|
|
#define DAC_TX_READY_OFFSET 29
|
|
#define DAC_TX_READY_SIZE 1
|
|
|
|
/* Bit manipulation macros */
|
|
#define DAC_BIT(name) \
|
|
(1 << DAC_##name##_OFFSET)
|
|
#define DAC_BF(name, value) \
|
|
(((value) & ((1 << DAC_##name##_SIZE) - 1)) \
|
|
<< DAC_##name##_OFFSET)
|
|
#define DAC_BFEXT(name, value) \
|
|
(((value) >> DAC_##name##_OFFSET) \
|
|
& ((1 << DAC_##name##_SIZE) - 1))
|
|
#define DAC_BFINS(name, value, old) \
|
|
(((old) & ~(((1 << DAC_##name##_SIZE) - 1) \
|
|
<< DAC_##name##_OFFSET)) \
|
|
| DAC_BF(name, value))
|
|
|
|
/* Register access macros */
|
|
#define dac_readl(port, reg) \
|
|
__raw_readl((port)->regs + DAC_##reg)
|
|
#define dac_writel(port, reg, value) \
|
|
__raw_writel((value), (port)->regs + DAC_##reg)
|
|
|
|
/*
|
|
* ABDAC supports a maximum of 6 different rates from a generic clock. The
|
|
* generic clock has a power of two divider, which gives 6 steps from 192 kHz
|
|
* to 5112 Hz.
|
|
*/
|
|
#define MAX_NUM_RATES 6
|
|
/* ALSA seems to use rates between 192000 Hz and 5112 Hz. */
|
|
#define RATE_MAX 192000
|
|
#define RATE_MIN 5112
|
|
|
|
enum {
|
|
DMA_READY = 0,
|
|
};
|
|
|
|
struct atmel_abdac_dma {
|
|
struct dma_chan *chan;
|
|
struct dw_cyclic_desc *cdesc;
|
|
};
|
|
|
|
struct atmel_abdac {
|
|
struct clk *pclk;
|
|
struct clk *sample_clk;
|
|
struct platform_device *pdev;
|
|
struct atmel_abdac_dma dma;
|
|
|
|
struct snd_pcm_hw_constraint_list constraints_rates;
|
|
struct snd_pcm_substream *substream;
|
|
struct snd_card *card;
|
|
struct snd_pcm *pcm;
|
|
|
|
void __iomem *regs;
|
|
unsigned long flags;
|
|
unsigned int rates[MAX_NUM_RATES];
|
|
unsigned int rates_num;
|
|
int irq;
|
|
};
|
|
|
|
#define get_dac(card) ((struct atmel_abdac *)(card)->private_data)
|
|
|
|
/* This function is called by the DMA driver. */
|
|
static void atmel_abdac_dma_period_done(void *arg)
|
|
{
|
|
struct atmel_abdac *dac = arg;
|
|
snd_pcm_period_elapsed(dac->substream);
|
|
}
|
|
|
|
static int atmel_abdac_prepare_dma(struct atmel_abdac *dac,
|
|
struct snd_pcm_substream *substream,
|
|
enum dma_data_direction direction)
|
|
{
|
|
struct dma_chan *chan = dac->dma.chan;
|
|
struct dw_cyclic_desc *cdesc;
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
unsigned long buffer_len, period_len;
|
|
|
|
/*
|
|
* We don't do DMA on "complex" transfers, i.e. with
|
|
* non-halfword-aligned buffers or lengths.
|
|
*/
|
|
if (runtime->dma_addr & 1 || runtime->buffer_size & 1) {
|
|
dev_dbg(&dac->pdev->dev, "too complex transfer\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
buffer_len = frames_to_bytes(runtime, runtime->buffer_size);
|
|
period_len = frames_to_bytes(runtime, runtime->period_size);
|
|
|
|
cdesc = dw_dma_cyclic_prep(chan, runtime->dma_addr, buffer_len,
|
|
period_len, DMA_MEM_TO_DEV);
|
|
if (IS_ERR(cdesc)) {
|
|
dev_dbg(&dac->pdev->dev, "could not prepare cyclic DMA\n");
|
|
return PTR_ERR(cdesc);
|
|
}
|
|
|
|
cdesc->period_callback = atmel_abdac_dma_period_done;
|
|
cdesc->period_callback_param = dac;
|
|
|
|
dac->dma.cdesc = cdesc;
|
|
|
|
set_bit(DMA_READY, &dac->flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_pcm_hardware atmel_abdac_hw = {
|
|
.info = (SNDRV_PCM_INFO_MMAP
|
|
| SNDRV_PCM_INFO_MMAP_VALID
|
|
| SNDRV_PCM_INFO_INTERLEAVED
|
|
| SNDRV_PCM_INFO_BLOCK_TRANSFER
|
|
| SNDRV_PCM_INFO_RESUME
|
|
| SNDRV_PCM_INFO_PAUSE),
|
|
.formats = (SNDRV_PCM_FMTBIT_S16_BE),
|
|
.rates = (SNDRV_PCM_RATE_KNOT),
|
|
.rate_min = RATE_MIN,
|
|
.rate_max = RATE_MAX,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.buffer_bytes_max = 64 * 4096,
|
|
.period_bytes_min = 4096,
|
|
.period_bytes_max = 4096,
|
|
.periods_min = 6,
|
|
.periods_max = 64,
|
|
};
|
|
|
|
static int atmel_abdac_open(struct snd_pcm_substream *substream)
|
|
{
|
|
struct atmel_abdac *dac = snd_pcm_substream_chip(substream);
|
|
|
|
dac->substream = substream;
|
|
atmel_abdac_hw.rate_max = dac->rates[dac->rates_num - 1];
|
|
atmel_abdac_hw.rate_min = dac->rates[0];
|
|
substream->runtime->hw = atmel_abdac_hw;
|
|
|
|
return snd_pcm_hw_constraint_list(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE, &dac->constraints_rates);
|
|
}
|
|
|
|
static int atmel_abdac_close(struct snd_pcm_substream *substream)
|
|
{
|
|
struct atmel_abdac *dac = snd_pcm_substream_chip(substream);
|
|
dac->substream = NULL;
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_abdac_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *hw_params)
|
|
{
|
|
struct atmel_abdac *dac = snd_pcm_substream_chip(substream);
|
|
int retval;
|
|
|
|
retval = snd_pcm_lib_malloc_pages(substream,
|
|
params_buffer_bytes(hw_params));
|
|
if (retval < 0)
|
|
return retval;
|
|
/* snd_pcm_lib_malloc_pages returns 1 if buffer is changed. */
|
|
if (retval == 1)
|
|
if (test_and_clear_bit(DMA_READY, &dac->flags))
|
|
dw_dma_cyclic_free(dac->dma.chan);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int atmel_abdac_hw_free(struct snd_pcm_substream *substream)
|
|
{
|
|
struct atmel_abdac *dac = snd_pcm_substream_chip(substream);
|
|
if (test_and_clear_bit(DMA_READY, &dac->flags))
|
|
dw_dma_cyclic_free(dac->dma.chan);
|
|
return snd_pcm_lib_free_pages(substream);
|
|
}
|
|
|
|
static int atmel_abdac_prepare(struct snd_pcm_substream *substream)
|
|
{
|
|
struct atmel_abdac *dac = snd_pcm_substream_chip(substream);
|
|
int retval;
|
|
|
|
retval = clk_set_rate(dac->sample_clk, 256 * substream->runtime->rate);
|
|
if (retval)
|
|
return retval;
|
|
|
|
if (!test_bit(DMA_READY, &dac->flags))
|
|
retval = atmel_abdac_prepare_dma(dac, substream, DMA_TO_DEVICE);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int atmel_abdac_trigger(struct snd_pcm_substream *substream, int cmd)
|
|
{
|
|
struct atmel_abdac *dac = snd_pcm_substream_chip(substream);
|
|
int retval = 0;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: /* fall through */
|
|
case SNDRV_PCM_TRIGGER_RESUME: /* fall through */
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
clk_enable(dac->sample_clk);
|
|
retval = dw_dma_cyclic_start(dac->dma.chan);
|
|
if (retval)
|
|
goto out;
|
|
dac_writel(dac, CTRL, DAC_BIT(EN));
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH: /* fall through */
|
|
case SNDRV_PCM_TRIGGER_SUSPEND: /* fall through */
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
dw_dma_cyclic_stop(dac->dma.chan);
|
|
dac_writel(dac, DATA, 0);
|
|
dac_writel(dac, CTRL, 0);
|
|
clk_disable(dac->sample_clk);
|
|
break;
|
|
default:
|
|
retval = -EINVAL;
|
|
break;
|
|
}
|
|
out:
|
|
return retval;
|
|
}
|
|
|
|
static snd_pcm_uframes_t
|
|
atmel_abdac_pointer(struct snd_pcm_substream *substream)
|
|
{
|
|
struct atmel_abdac *dac = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
snd_pcm_uframes_t frames;
|
|
unsigned long bytes;
|
|
|
|
bytes = dw_dma_get_src_addr(dac->dma.chan);
|
|
bytes -= runtime->dma_addr;
|
|
|
|
frames = bytes_to_frames(runtime, bytes);
|
|
if (frames >= runtime->buffer_size)
|
|
frames -= runtime->buffer_size;
|
|
|
|
return frames;
|
|
}
|
|
|
|
static irqreturn_t abdac_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct atmel_abdac *dac = dev_id;
|
|
u32 status;
|
|
|
|
status = dac_readl(dac, INT_STATUS);
|
|
if (status & DAC_BIT(UNDERRUN)) {
|
|
dev_err(&dac->pdev->dev, "underrun detected\n");
|
|
dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
|
|
} else {
|
|
dev_err(&dac->pdev->dev, "spurious interrupt (status=0x%x)\n",
|
|
status);
|
|
dac_writel(dac, INT_CLR, status);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct snd_pcm_ops atmel_abdac_ops = {
|
|
.open = atmel_abdac_open,
|
|
.close = atmel_abdac_close,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = atmel_abdac_hw_params,
|
|
.hw_free = atmel_abdac_hw_free,
|
|
.prepare = atmel_abdac_prepare,
|
|
.trigger = atmel_abdac_trigger,
|
|
.pointer = atmel_abdac_pointer,
|
|
};
|
|
|
|
static int atmel_abdac_pcm_new(struct atmel_abdac *dac)
|
|
{
|
|
struct snd_pcm_hardware hw = atmel_abdac_hw;
|
|
struct snd_pcm *pcm;
|
|
int retval;
|
|
|
|
retval = snd_pcm_new(dac->card, dac->card->shortname,
|
|
dac->pdev->id, 1, 0, &pcm);
|
|
if (retval)
|
|
return retval;
|
|
|
|
strcpy(pcm->name, dac->card->shortname);
|
|
pcm->private_data = dac;
|
|
pcm->info_flags = 0;
|
|
dac->pcm = pcm;
|
|
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &atmel_abdac_ops);
|
|
|
|
retval = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
|
|
&dac->pdev->dev, hw.periods_min * hw.period_bytes_min,
|
|
hw.buffer_bytes_max);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static bool filter(struct dma_chan *chan, void *slave)
|
|
{
|
|
struct dw_dma_slave *dws = slave;
|
|
|
|
if (dws->dma_dev == chan->device->dev) {
|
|
chan->private = dws;
|
|
return true;
|
|
} else
|
|
return false;
|
|
}
|
|
|
|
static int set_sample_rates(struct atmel_abdac *dac)
|
|
{
|
|
long new_rate = RATE_MAX;
|
|
int retval = -EINVAL;
|
|
int index = 0;
|
|
|
|
/* we start at 192 kHz and work our way down to 5112 Hz */
|
|
while (new_rate >= RATE_MIN && index < (MAX_NUM_RATES + 1)) {
|
|
new_rate = clk_round_rate(dac->sample_clk, 256 * new_rate);
|
|
if (new_rate < 0)
|
|
break;
|
|
/* make sure we are below the ABDAC clock */
|
|
if (new_rate <= clk_get_rate(dac->pclk)) {
|
|
dac->rates[index] = new_rate / 256;
|
|
index++;
|
|
}
|
|
/* divide by 256 and then by two to get next rate */
|
|
new_rate /= 256 * 2;
|
|
}
|
|
|
|
if (index) {
|
|
int i;
|
|
|
|
/* reverse array, smallest go first */
|
|
for (i = 0; i < (index / 2); i++) {
|
|
unsigned int tmp = dac->rates[index - 1 - i];
|
|
dac->rates[index - 1 - i] = dac->rates[i];
|
|
dac->rates[i] = tmp;
|
|
}
|
|
|
|
dac->constraints_rates.count = index;
|
|
dac->constraints_rates.list = dac->rates;
|
|
dac->constraints_rates.mask = 0;
|
|
dac->rates_num = index;
|
|
|
|
retval = 0;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int atmel_abdac_probe(struct platform_device *pdev)
|
|
{
|
|
struct snd_card *card;
|
|
struct atmel_abdac *dac;
|
|
struct resource *regs;
|
|
struct atmel_abdac_pdata *pdata;
|
|
struct clk *pclk;
|
|
struct clk *sample_clk;
|
|
int retval;
|
|
int irq;
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!regs) {
|
|
dev_dbg(&pdev->dev, "no memory resource\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_dbg(&pdev->dev, "could not get IRQ number\n");
|
|
return irq;
|
|
}
|
|
|
|
pdata = pdev->dev.platform_data;
|
|
if (!pdata) {
|
|
dev_dbg(&pdev->dev, "no platform data\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
pclk = clk_get(&pdev->dev, "pclk");
|
|
if (IS_ERR(pclk)) {
|
|
dev_dbg(&pdev->dev, "no peripheral clock\n");
|
|
return PTR_ERR(pclk);
|
|
}
|
|
sample_clk = clk_get(&pdev->dev, "sample_clk");
|
|
if (IS_ERR(sample_clk)) {
|
|
dev_dbg(&pdev->dev, "no sample clock\n");
|
|
retval = PTR_ERR(sample_clk);
|
|
goto out_put_pclk;
|
|
}
|
|
clk_enable(pclk);
|
|
|
|
retval = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
|
|
THIS_MODULE, sizeof(struct atmel_abdac), &card);
|
|
if (retval) {
|
|
dev_dbg(&pdev->dev, "could not create sound card device\n");
|
|
goto out_put_sample_clk;
|
|
}
|
|
|
|
dac = get_dac(card);
|
|
|
|
dac->irq = irq;
|
|
dac->card = card;
|
|
dac->pclk = pclk;
|
|
dac->sample_clk = sample_clk;
|
|
dac->pdev = pdev;
|
|
|
|
retval = set_sample_rates(dac);
|
|
if (retval < 0) {
|
|
dev_dbg(&pdev->dev, "could not set supported rates\n");
|
|
goto out_free_card;
|
|
}
|
|
|
|
dac->regs = ioremap(regs->start, resource_size(regs));
|
|
if (!dac->regs) {
|
|
dev_dbg(&pdev->dev, "could not remap register memory\n");
|
|
retval = -ENOMEM;
|
|
goto out_free_card;
|
|
}
|
|
|
|
/* make sure the DAC is silent and disabled */
|
|
dac_writel(dac, DATA, 0);
|
|
dac_writel(dac, CTRL, 0);
|
|
|
|
retval = request_irq(irq, abdac_interrupt, 0, "abdac", dac);
|
|
if (retval) {
|
|
dev_dbg(&pdev->dev, "could not request irq\n");
|
|
goto out_unmap_regs;
|
|
}
|
|
|
|
snd_card_set_dev(card, &pdev->dev);
|
|
|
|
if (pdata->dws.dma_dev) {
|
|
dma_cap_mask_t mask;
|
|
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_SLAVE, mask);
|
|
|
|
dac->dma.chan = dma_request_channel(mask, filter, &pdata->dws);
|
|
if (dac->dma.chan) {
|
|
struct dma_slave_config dma_conf = {
|
|
.dst_addr = regs->start + DAC_DATA,
|
|
.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
|
.src_maxburst = 1,
|
|
.dst_maxburst = 1,
|
|
.direction = DMA_MEM_TO_DEV,
|
|
.device_fc = false,
|
|
};
|
|
|
|
dmaengine_slave_config(dac->dma.chan, &dma_conf);
|
|
}
|
|
}
|
|
if (!pdata->dws.dma_dev || !dac->dma.chan) {
|
|
dev_dbg(&pdev->dev, "DMA not available\n");
|
|
retval = -ENODEV;
|
|
goto out_unset_card_dev;
|
|
}
|
|
|
|
strcpy(card->driver, "Atmel ABDAC");
|
|
strcpy(card->shortname, "Atmel ABDAC");
|
|
sprintf(card->longname, "Atmel Audio Bitstream DAC");
|
|
|
|
retval = atmel_abdac_pcm_new(dac);
|
|
if (retval) {
|
|
dev_dbg(&pdev->dev, "could not register ABDAC pcm device\n");
|
|
goto out_release_dma;
|
|
}
|
|
|
|
retval = snd_card_register(card);
|
|
if (retval) {
|
|
dev_dbg(&pdev->dev, "could not register sound card\n");
|
|
goto out_release_dma;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, card);
|
|
|
|
dev_info(&pdev->dev, "Atmel ABDAC at 0x%p using %s\n",
|
|
dac->regs, dev_name(&dac->dma.chan->dev->device));
|
|
|
|
return retval;
|
|
|
|
out_release_dma:
|
|
dma_release_channel(dac->dma.chan);
|
|
dac->dma.chan = NULL;
|
|
out_unset_card_dev:
|
|
snd_card_set_dev(card, NULL);
|
|
free_irq(irq, dac);
|
|
out_unmap_regs:
|
|
iounmap(dac->regs);
|
|
out_free_card:
|
|
snd_card_free(card);
|
|
out_put_sample_clk:
|
|
clk_put(sample_clk);
|
|
clk_disable(pclk);
|
|
out_put_pclk:
|
|
clk_put(pclk);
|
|
return retval;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int atmel_abdac_suspend(struct device *pdev)
|
|
{
|
|
struct snd_card *card = dev_get_drvdata(pdev);
|
|
struct atmel_abdac *dac = card->private_data;
|
|
|
|
dw_dma_cyclic_stop(dac->dma.chan);
|
|
clk_disable(dac->sample_clk);
|
|
clk_disable(dac->pclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_abdac_resume(struct device *pdev)
|
|
{
|
|
struct snd_card *card = dev_get_drvdata(pdev);
|
|
struct atmel_abdac *dac = card->private_data;
|
|
|
|
clk_enable(dac->pclk);
|
|
clk_enable(dac->sample_clk);
|
|
if (test_bit(DMA_READY, &dac->flags))
|
|
dw_dma_cyclic_start(dac->dma.chan);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(atmel_abdac_pm, atmel_abdac_suspend, atmel_abdac_resume);
|
|
#define ATMEL_ABDAC_PM_OPS &atmel_abdac_pm
|
|
#else
|
|
#define ATMEL_ABDAC_PM_OPS NULL
|
|
#endif
|
|
|
|
static int atmel_abdac_remove(struct platform_device *pdev)
|
|
{
|
|
struct snd_card *card = platform_get_drvdata(pdev);
|
|
struct atmel_abdac *dac = get_dac(card);
|
|
|
|
clk_put(dac->sample_clk);
|
|
clk_disable(dac->pclk);
|
|
clk_put(dac->pclk);
|
|
|
|
dma_release_channel(dac->dma.chan);
|
|
dac->dma.chan = NULL;
|
|
snd_card_set_dev(card, NULL);
|
|
iounmap(dac->regs);
|
|
free_irq(dac->irq, dac);
|
|
snd_card_free(card);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver atmel_abdac_driver = {
|
|
.remove = atmel_abdac_remove,
|
|
.driver = {
|
|
.name = "atmel_abdac",
|
|
.owner = THIS_MODULE,
|
|
.pm = ATMEL_ABDAC_PM_OPS,
|
|
},
|
|
};
|
|
|
|
static int __init atmel_abdac_init(void)
|
|
{
|
|
return platform_driver_probe(&atmel_abdac_driver,
|
|
atmel_abdac_probe);
|
|
}
|
|
module_init(atmel_abdac_init);
|
|
|
|
static void __exit atmel_abdac_exit(void)
|
|
{
|
|
platform_driver_unregister(&atmel_abdac_driver);
|
|
}
|
|
module_exit(atmel_abdac_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Driver for Atmel Audio Bitstream DAC (ABDAC)");
|
|
MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
|