linux/arch/arm64/boot/dts/freescale
Linus Torvalds 2f3fbfdaf7 ARM: SoC DT changes for 5.9
As usual, there are many patches addressing minor issues in existing
 DTS files, such as DTC warnings, or adding support for additional
 peripherals.
 
 There are three added SoCs in existing product families:
 
  - Amazon:
     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and following
     the already supported Cortex-A1`5 and Cortex-A57 based Alpine chips.
     This one is added together with the official Evaluation platform.
 
  - Qualcomm:
     The Snapdragon SDM630 platform is a family of mid-range mobile phone
     chips from 2017 based on Cortex-A53 or Kryo 260 CPUs.
     A total of five end-user products are added based on these, all
     Android phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and
     XA2 Ultra.
 
  - Renesas:
     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals.
     It is added along with the HopeRun HiHope RZ/G2H development board
 
 A small number of new boards for already supported SoCs also debut:
 
  - Allwinner sunxi:
     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.
 
  - Amlogic Meson:
     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box
 
  - Aspeed:
     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.
 
  - Mediatek:
     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook
     based on the MT8183 (Helio P60t) SoC.
 
  - Nvidia Tegra:
     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels
     and become useful again.
 
     The Jetson Xavier NX Developer Kit uses a SoM and carrier board
     for the Tegra194, their latest 64-bit chip based on Carmel CPU
     cores and Volta graphics.
 
  - NXP i.MX:
     Five new boards based on the 32-bit i.MX6 series are added:
     The MYiR MYS-6ULX single-board computer, and four different
     models of industrial computers from Protonic.
 
  - Qualcomm:
     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC
     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony
     Xperia Z5.
 
  - Renesas:
     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards.
     Beacon EmbeddedWorks adds another SoM+Carrier development board
     for RZ/G2M.
 
  - Rockchips:
     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it
     is based on, using the high-end 32-bit rk3288 SoC.
 
 Notable updates to existing platforms are usually for added on-chip
 peripherals, including:
 
  - ASpeed AST2xxx (various)
 
  - Allwinner (cpufreq, thermal, Pinephone touchscreen)
 
  - Amlogic Meson (audio, gpu dvdfs, board updates)
 
  - Arm Versatile
 
  - Broadcom (board updates for switch ports, Raspberry pi clock updates)
 
  - Hisilicon (various)
 
  - Intel/Altera SoCFPGA (various)
 
  - Marvell Armada 7xxx/8xxx (smmu)
 
  - Marvell MMP (GPU on mmp2/mmp3)
 
  - Mediatek mt8183 (USB, pericfg)
 
  - NXP Layerscape (VPU, thermal, DSPI)
 
  - NXP i.MX (VPU, bindings, board updates)
 
  - Nvidia Tegra194 (GPU)
 
  - Qualcomm (GPU, Interconnect, ...)
 
  - Renesas R-Car (SPI, IPMMU, board updates)
 
  - STMicroelectronics STM32 (various)
 
  - Samsung Exynos (various)
 
  - Socionext Uniphier (updates to serial, and pcie)
 
  - TI K3 (serdes, usb3, audio, sd, chipid)
 
  - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl8j3zoACgkQmmx57+YA
 GNlOAQ//RuU0v5AyUyZZGsYKcKltg0qCiUj+CWldlaHS41oJQ9UC4e2kqhZtR28V
 Cqe853h976Xm74Fr7Hci4OCo9wxGrNLXFgNkNrYzR9ud76eEcSTQX8Jj9slZvLVu
 fEzNOK4VD0cIDRkw5xNZfGHGUSN7ttOV+NClVSA2zBiKv8jNivRI24+vvc+f92yb
 d5P7+aeex19xSOiMmuuj5yBbU+85pbR5aoRRS5Ohe5mVL5wW9LQTs7Otsk989FBe
 jOCthKfPFtxTTYMrWmM3P0DcHku/MNAsRQKUysrJlMcSefXOgkfMuN6cw4xypXAS
 OvFNnIp8cigt8MLWIyU2AiLkkr3FpEsZQliy4XTBl1n6mGlRHB5wD8i294cLtQlJ
 EO5yu3I3UimIyG7i4aWCy0sJMYedDrnoYisQk00aDbzea7quSuXC9yo9IompdBsr
 Fqn5D7tFnVs79v/2zDhqlMU8GmFSoqPyfPSE3dgLCOHlMdd2ToD9I4ahtsJVZTjk
 1Ro9TMFK+b5LIQot1inOPff0aurpZPLA7wmxUfez51IwG4UdVsmtawwPCl6OrgYm
 TttK+J1yuCMSxds7QC3rPfiubc+RLEy+IQxP1tR55THg72RDWRnwXTXb5AvAu/vx
 GbY1AzGszdr1+mR04CKbFyICG0l0vlyuX9qSsknRW48MaYgn8GQ=
 =Tpj3
 -----END PGP SIGNATURE-----

Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, there are many patches addressing minor issues in existing
  DTS files, such as DTC warnings, or adding support for additional
  peripherals.

  There are three added SoCs in existing product families:

   - Amazon:

     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and
     following the already supported Cortex-A1`5 and Cortex-A57 based
     Alpine chips. This one is added together with the official
     Evaluation platform.

   - Qualcomm:

     The Snapdragon SDM630 platform is a family of mid-range mobile
     phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
     of five end-user products are added based on these, all Android
     phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.

   - Renesas:

     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals. It is added along with the HopeRun HiHope
     RZ/G2H development board

  A small number of new boards for already supported SoCs also debut:

   - Allwinner sunxi:

     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.

   - Amlogic Meson:

     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box

   - Aspeed:

     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.

   - Mediatek:

     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
     on the MT8183 (Helio P60t) SoC.

   - Nvidia Tegra:

     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels and
     become useful again.

     The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
     the Tegra194, their latest 64-bit chip based on Carmel CPU cores
     and Volta graphics.

   - NXP i.MX:

     Five new boards based on the 32-bit i.MX6 series are added: The
     MYiR MYS-6ULX single-board computer, and four different models of
     industrial computers from Protonic.

   - Qualcomm:

     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC

     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
     Z5.

   - Renesas:

     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards. Beacon EmbeddedWorks adds another
     SoM+Carrier development board for RZ/G2M.

   - Rockchips:

     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
     based on, using the high-end 32-bit rk3288 SoC.

  Notable updates to existing platforms are usually for added on-chip
  peripherals, including:

   - ASpeed AST2xxx (various)

   - Allwinner (cpufreq, thermal, Pinephone touchscreen)

   - Amlogic Meson (audio, gpu dvdfs, board updates)

   - Arm Versatile

   - Broadcom (board updates for switch ports, Raspberry pi clock updates)

   - Hisilicon (various)

   - Intel/Altera SoCFPGA (various)

   - Marvell Armada 7xxx/8xxx (smmu)

   - Marvell MMP (GPU on mmp2/mmp3)

   - Mediatek mt8183 (USB, pericfg)

   - NXP Layerscape (VPU, thermal, DSPI)

   - NXP i.MX (VPU, bindings, board updates)

   - Nvidia Tegra194 (GPU)

   - Qualcomm (GPU, Interconnect, ...)

   - Renesas R-Car (SPI, IPMMU, board updates)

   - STMicroelectronics STM32 (various)

   - Samsung Exynos (various)

   - Socionext Uniphier (updates to serial, and pcie)

   - TI K3 (serdes, usb3, audio, sd, chipid)

   - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"

* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
  arm64: dts: meson: odroid-n2: add jack audio output support
  arm64: dts: meson: odroid-n2: enable audio loopback
  ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  ...
2020-08-03 19:19:34 -07:00
..
Makefile arm64: dts: ls1028a: sl28: add support for variant 2 2020-03-16 16:16:00 +08:00
fsl-ls208xa-qds.dtsi arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller 2018-12-16 16:24:01 +08:00
fsl-ls208xa-rdb.dtsi arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB 2020-01-09 15:32:29 +08:00
fsl-ls208xa.dtsi arm64: dts: layerscape: add ftm_alarm0 node 2020-07-11 23:38:49 +08:00
fsl-ls1012a-frdm.dts arm64: dts: ls1012a: Add QSPI node properties 2020-04-25 09:16:06 +08:00
fsl-ls1012a-frwy.dts arm64: dts: ls1012a: Add QSPI node properties 2020-04-25 09:16:06 +08:00
fsl-ls1012a-oxalis.dts arm64: dts: freescale: Enable PCI-E controller for Oxalis board 2019-03-20 20:58:26 +08:00
fsl-ls1012a-qds.dts arm64: dts: ls1012a: Add QSPI node properties 2020-04-25 09:16:06 +08:00
fsl-ls1012a-rdb.dts arm64: dts: ls1012a: Add QSPI node properties 2020-04-25 09:16:06 +08:00
fsl-ls1012a.dtsi arm64: dts: layerscape: add ftm_alarm0 node 2020-07-11 23:38:49 +08:00
fsl-ls1028a-kontron-kbox-a-230-ls.dts arm64: dts: ls1028a: disable the felix switch by default 2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var2.dts arm64: dts: ls1028a: sl28: keep switch port names consistent 2020-05-20 22:58:15 +08:00
fsl-ls1028a-kontron-sl28-var3-ads2.dts arm64: dts: ls1028a: sl28: fix on-board EEPROMS 2020-03-16 16:16:00 +08:00
fsl-ls1028a-kontron-sl28-var4.dts arm64: dts: ls1028: sl28: explicitly enable network ports 2020-03-11 15:58:13 +08:00
fsl-ls1028a-kontron-sl28.dts arm64: dts: freescale: sl28: enable LPUART1 2020-05-20 09:12:45 +08:00
fsl-ls1028a-qds.dts arm64: dts: ls1028a-qds: Add DSPI flash nodes 2020-07-13 18:46:38 +08:00
fsl-ls1028a-rdb.dts arm64: dts: ls1028a: disable the felix switch by default 2020-03-16 16:16:00 +08:00
fsl-ls1028a.dtsi arm64: dts: ls1028a: Add ftm_alarm0 DT node 2020-07-11 23:37:31 +08:00
fsl-ls1043-post.dtsi arm64: dts: ls1043a: FMan erratum A050385 2020-03-06 21:55:32 -08:00
fsl-ls1043a-qds.dts arm64: dts: ls1043a: update USB nodes status to match board config 2020-07-13 15:09:31 +08:00
fsl-ls1043a-rdb.dts arm64: dts: ls1043a: update USB nodes status to match board config 2020-07-13 15:09:31 +08:00
fsl-ls1043a.dtsi arm64: dts: ls1043a: update USB nodes status to match board config 2020-07-13 15:09:31 +08:00
fsl-ls1046-post.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1046a-frwy.dts arm64: dts: ls1046a: Add QSPI node for ls1046afrwy 2019-12-11 11:13:37 +08:00
fsl-ls1046a-qds.dts arm64: dts: fsl: use a generic node name for m25p80 flashes 2019-01-11 17:13:04 +08:00
fsl-ls1046a-rdb.dts arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode 2020-03-16 14:58:33 -07:00
fsl-ls1046a.dtsi arm64: dts: ls1046a: add more thermal zone support 2020-07-13 10:17:01 +08:00
fsl-ls1088a-qds.dts arm64: dts: ls1088a: Add QSPI support for NXP LS1088 2019-12-11 11:13:44 +08:00
fsl-ls1088a-rdb.dts arm64: dts: ls1088a: support eMMC HS200 speed mode for RDB board 2020-02-14 11:39:40 +08:00
fsl-ls1088a.dtsi arm64: dts: layerscape: add ftm_alarm0 node 2020-07-11 23:38:49 +08:00
fsl-ls2080a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a-simu.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a.dtsi arm64: dts: freescale: Add missing cooling device properties for CPUs 2018-07-03 15:01:09 +08:00
fsl-ls2088a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2088a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2088a.dtsi arm64: dts: layerscape: removed compatible string "snps,dw-pcie" 2018-12-08 10:28:38 +08:00
fsl-lx2160a-cex7.dtsi arm64: dts: lx2160a-cex7: add on-module eeproms 2020-03-11 15:58:13 +08:00
fsl-lx2160a-clearfog-cx.dts arm64: dts: lx2160a: add dts for CEX7 platforms 2019-12-23 11:36:36 +08:00
fsl-lx2160a-clearfog-itx.dtsi arm64: dts: lx2160a: add dts for CEX7 platforms 2019-12-23 11:36:36 +08:00
fsl-lx2160a-honeycomb.dts arm64: dts: lx2160a: add dts for CEX7 platforms 2019-12-23 11:36:36 +08:00
fsl-lx2160a-qds.dts arm64: dts: lx2160a: add DT node for all DSPI controller 2020-07-11 22:13:35 +08:00
fsl-lx2160a-rdb.dts arm64: dts: lx2160a-rdb: fix shunt-resistor value 2020-07-20 10:31:11 +08:00
fsl-lx2160a.dtsi arm64: dts: lx2160a: Increase configuration space size 2020-07-13 16:55:34 +08:00
imx8mm-beacon-baseboard.dtsi arm64: dts: imx: Add Beacon i.MX8m-Mini development kit 2020-04-23 22:20:17 +08:00
imx8mm-beacon-kit.dts arm64: dts: imx: Add Beacon i.MX8m-Mini development kit 2020-04-23 22:20:17 +08:00
imx8mm-beacon-som.dtsi arm64: dts: imx8mm-beacon: Fix voltages on LDO1 and LDO2 2020-06-18 22:35:02 +08:00
imx8mm-evk.dts arm64: dts: imx8mm-evk: correct ldo1/ldo2 voltage range 2020-06-18 15:34:50 +08:00
imx8mm-pinfunc.h arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals 2019-12-23 11:41:38 +08:00
imx8mm.dtsi arm64: dts: imx8m: add mu node 2020-06-23 14:50:39 +08:00
imx8mn-ddr4-evk.dts arm64: dts: imx8mn-ddr4-evk: correct ldo1/ldo2 voltage range 2020-06-18 15:34:55 +08:00
imx8mn-evk.dts arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board 2020-07-13 12:09:30 +08:00
imx8mn-evk.dtsi arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board 2020-07-13 12:09:30 +08:00
imx8mn-pinfunc.h dt-bindings: imx: Add pinctrl binding doc for i.MX8MN 2019-06-25 10:39:39 +02:00
imx8mn.dtsi arm64: dts: imx8m: add mu node 2020-06-23 14:50:39 +08:00
imx8mp-evk.dts arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus 2020-03-11 16:07:17 +08:00
imx8mp-pinfunc.h arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM 2020-04-29 11:30:32 +08:00
imx8mp.dtsi arm64: dts: imx8mp: add ddr pmu device node 2020-07-13 10:19:19 +08:00
imx8mq-evk.dts arm64: dts: imx8mq-evk: add phy-reset-gpios for fec1 2020-02-24 09:37:19 +08:00
imx8mq-hummingboard-pulse.dts arm64: dts: imx8mq-hummingboard-pulse: add eeprom description 2020-01-09 17:14:46 +08:00
imx8mq-librem5-devkit.dts arm64: dts: imx8mq-librem5-devkit: Don't use underscore in node name 2020-04-23 09:17:35 +08:00
imx8mq-nitrogen.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-phanbell.dts arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration 2020-03-11 17:12:32 +08:00
imx8mq-pico-pi.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-pinfunc.h arm64: add basic DTS for i.MX8MQ 2018-12-16 17:28:01 +08:00
imx8mq-sr-som.dtsi arm64: dts: imx8mq-sr-som: add eeprom description 2020-01-09 17:14:32 +08:00
imx8mq-thor96.dts arm64: dts: freescale: Add devicetree support for Thor96 board 2020-01-09 14:40:55 +08:00
imx8mq-zii-ultra-rmb3.dts arm64: dts: zii-ultra: adjust board names 2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra-zest.dts arm64: dts: zii-ultra: adjust board names 2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra.dtsi arm64: dts: zii-ultra: update MDIO speed and preamble 2020-07-13 16:18:20 +08:00
imx8mq.dtsi arm64: dts: imx8m: add mu node 2020-06-23 14:50:39 +08:00
imx8qxp-ai_ml.dts arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8qxp-colibri-eval-v3.dts arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-colibri-eval-v3.dtsi arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-colibri.dtsi arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-mek.dts arm64: dts: imx8qxp-mek: Do not use underscore in node name 2020-05-13 16:56:45 +08:00
imx8qxp.dtsi arm64: dts: imx8qxp: Add ethernet alias 2020-06-23 19:06:59 +08:00
qoriq-bman-portals.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-0.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-1.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-2.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-3.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-4.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-5.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-0.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-1.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0.dtsi arm64: dts: fsl: add fsl,extts-fifo property for fman ptp 2020-04-29 11:44:43 +08:00
qoriq-qman-portals.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
s32v234-evb.dts arm64: dts: fsl: Add device tree for S32V234-EVB 2019-10-28 21:48:03 +08:00
s32v234.dtsi arm64: dts: freescale: s32v234: use generic name bus 2020-02-13 11:25:25 +08:00