openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/usb/mtu3/mtu3_gadget_ep0.c

899 lines
21 KiB
C
Raw Blame History

/*
* mtu3_gadget_ep0.c - MediaTek USB3 DRD peripheral driver ep0 handling
*
* Copyright (c) 2016 MediaTek Inc.
*
* Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/usb/composite.h>
#include "mtu3.h"
/* ep0 is always mtu3->in_eps[0] */
#define next_ep0_request(mtu) next_request((mtu)->ep0)
/* for high speed test mode; see USB 2.0 spec 7.1.20 */
static const u8 mtu3_test_packet[53] = {
/* implicit SYNC then DATA0 to start */
/* JKJKJKJK x9 */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* JJKKJJKK x8 */
0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
/* JJJJKKKK x8 */
0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
/* JJJJJJJKKKKKKK x8 */
0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
/* JJJJJJJK x8 */
0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
/* JKKKKKKK x10, JK */
0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e,
/* implicit CRC16 then EOP to end */
};
static char *decode_ep0_state(struct mtu3 *mtu)
{
switch (mtu->ep0_state) {
case MU3D_EP0_STATE_SETUP:
return "SETUP";
case MU3D_EP0_STATE_TX:
return "IN";
case MU3D_EP0_STATE_RX:
return "OUT";
case MU3D_EP0_STATE_TX_END:
return "TX-END";
case MU3D_EP0_STATE_STALL:
return "STALL";
default:
return "??";
}
}
static void ep0_req_giveback(struct mtu3 *mtu, struct usb_request *req)
{
mtu3_req_complete(mtu->ep0, req, 0);
}
static int
forward_to_driver(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
__releases(mtu->lock)
__acquires(mtu->lock)
{
int ret;
if (!mtu->gadget_driver)
return -EOPNOTSUPP;
spin_unlock(&mtu->lock);
ret = mtu->gadget_driver->setup(&mtu->g, setup);
spin_lock(&mtu->lock);
dev_dbg(mtu->dev, "%s ret %d\n", __func__, ret);
return ret;
}
static void ep0_write_fifo(struct mtu3_ep *mep, const u8 *src, u16 len)
{
void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0;
u16 index = 0;
dev_dbg(mep->mtu->dev, "%s: ep%din, len=%d, buf=%p\n",
__func__, mep->epnum, len, src);
if (len >= 4) {
iowrite32_rep(fifo, src, len >> 2);
index = len & ~0x03;
}
if (len & 0x02) {
writew(*(u16 *)&src[index], fifo);
index += 2;
}
if (len & 0x01)
writeb(src[index], fifo);
}
static void ep0_read_fifo(struct mtu3_ep *mep, u8 *dst, u16 len)
{
void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0;
u32 value;
u16 index = 0;
dev_dbg(mep->mtu->dev, "%s: ep%dout len=%d buf=%p\n",
__func__, mep->epnum, len, dst);
if (len >= 4) {
ioread32_rep(fifo, dst, len >> 2);
index = len & ~0x03;
}
if (len & 0x3) {
value = readl(fifo);
memcpy(&dst[index], &value, len & 0x3);
}
}
static void ep0_load_test_packet(struct mtu3 *mtu)
{
/*
* because the length of test packet is less than max packet of HS ep0,
* write it into fifo directly.
*/
ep0_write_fifo(mtu->ep0, mtu3_test_packet, sizeof(mtu3_test_packet));
}
/*
* A. send STALL for setup transfer without data stage:
* set SENDSTALL and SETUPPKTRDY at the same time;
* B. send STALL for other cases:
* set SENDSTALL only.
*/
static void ep0_stall_set(struct mtu3_ep *mep0, bool set, u32 pktrdy)
{
struct mtu3 *mtu = mep0->mtu;
void __iomem *mbase = mtu->mac_base;
u32 csr;
/* EP0_SENTSTALL is W1C */
csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
if (set)
csr |= EP0_SENDSTALL | pktrdy;
else
csr = (csr & ~EP0_SENDSTALL) | EP0_SENTSTALL;
mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
mtu->delayed_status = false;
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
dev_dbg(mtu->dev, "ep0: %s STALL, ep0_state: %s\n",
set ? "SEND" : "CLEAR", decode_ep0_state(mtu));
}
static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq);
static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)
{}
static void ep0_set_sel_complete(struct usb_ep *ep, struct usb_request *req)
{
struct mtu3_request *mreq;
struct mtu3 *mtu;
struct usb_set_sel_req sel;
memcpy(&sel, req->buf, sizeof(sel));
mreq = to_mtu3_request(req);
mtu = mreq->mtu;
dev_dbg(mtu->dev, "u1sel:%d, u1pel:%d, u2sel:%d, u2pel:%d\n",
sel.u1_sel, sel.u1_pel, sel.u2_sel, sel.u2_pel);
}
/* queue data stage to handle 6 byte SET_SEL request */
static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
{
int ret;
u16 length = le16_to_cpu(setup->wLength);
if (unlikely(length != 6)) {
dev_err(mtu->dev, "%s wrong wLength:%d\n",
__func__, length);
return -EINVAL;
}
mtu->ep0_req.mep = mtu->ep0;
mtu->ep0_req.request.length = 6;
mtu->ep0_req.request.buf = mtu->setup_buf;
mtu->ep0_req.request.complete = ep0_set_sel_complete;
ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
return ret < 0 ? ret : 1;
}
static int
ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
{
struct mtu3_ep *mep = NULL;
int handled = 1;
u8 result[2] = {0, 0};
u8 epnum = 0;
int is_in;
switch (setup->bRequestType & USB_RECIP_MASK) {
case USB_RECIP_DEVICE:
result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
if (mtu->g.speed >= USB_SPEED_SUPER) {
result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
}
dev_dbg(mtu->dev, "%s result=%x, U1=%x, U2=%x\n", __func__,
result[0], mtu->u1_enable, mtu->u2_enable);
break;
case USB_RECIP_INTERFACE:
break;
case USB_RECIP_ENDPOINT:
epnum = (u8) le16_to_cpu(setup->wIndex);
is_in = epnum & USB_DIR_IN;
epnum &= USB_ENDPOINT_NUMBER_MASK;
if (epnum >= mtu->num_eps) {
handled = -EINVAL;
break;
}
if (!epnum)
break;
mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum;
if (!mep->desc) {
handled = -EINVAL;
break;
}
if (mep->flags & MTU3_EP_STALL)
result[0] |= 1 << USB_ENDPOINT_HALT;
break;
default:
/* class, vendor, etc ... delegate */
handled = 0;
break;
}
if (handled > 0) {
int ret;
/* prepare a data stage for GET_STATUS */
dev_dbg(mtu->dev, "get_status=%x\n", *(u16 *)result);
memcpy(mtu->setup_buf, result, sizeof(result));
mtu->ep0_req.mep = mtu->ep0;
mtu->ep0_req.request.length = 2;
mtu->ep0_req.request.buf = &mtu->setup_buf;
mtu->ep0_req.request.complete = ep0_dummy_complete;
ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
if (ret < 0)
handled = ret;
}
return handled;
}
static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
{
void __iomem *mbase = mtu->mac_base;
int handled = 1;
switch (le16_to_cpu(setup->wIndex) >> 8) {
case TEST_J:
dev_dbg(mtu->dev, "TEST_J\n");
mtu->test_mode_nr = TEST_J_MODE;
break;
case TEST_K:
dev_dbg(mtu->dev, "TEST_K\n");
mtu->test_mode_nr = TEST_K_MODE;
break;
case TEST_SE0_NAK:
dev_dbg(mtu->dev, "TEST_SE0_NAK\n");
mtu->test_mode_nr = TEST_SE0_NAK_MODE;
break;
case TEST_PACKET:
dev_dbg(mtu->dev, "TEST_PACKET\n");
mtu->test_mode_nr = TEST_PACKET_MODE;
break;
default:
handled = -EINVAL;
goto out;
}
mtu->test_mode = true;
/* no TX completion interrupt, and need restart platform after test */
if (mtu->test_mode_nr == TEST_PACKET_MODE)
ep0_load_test_packet(mtu);
mtu3_writel(mbase, U3D_USB2_TEST_MODE, mtu->test_mode_nr);
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
out:
return handled;
}
static int ep0_handle_feature_dev(struct mtu3 *mtu,
struct usb_ctrlrequest *setup, bool set)
{
void __iomem *mbase = mtu->mac_base;
int handled = -EINVAL;
u32 lpc;
switch (le16_to_cpu(setup->wValue)) {
case USB_DEVICE_REMOTE_WAKEUP:
mtu->may_wakeup = !!set;
handled = 1;
break;
case USB_DEVICE_TEST_MODE:
if (!set || (mtu->g.speed != USB_SPEED_HIGH) ||
(le16_to_cpu(setup->wIndex) & 0xff))
break;
handled = handle_test_mode(mtu, setup);
break;
case USB_DEVICE_U1_ENABLE:
if (mtu->g.speed < USB_SPEED_SUPER ||
mtu->g.state != USB_STATE_CONFIGURED)
break;
lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
if (set)
lpc |= SW_U1_ACCEPT_ENABLE;
else
lpc &= ~SW_U1_ACCEPT_ENABLE;
mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
mtu->u1_enable = !!set;
handled = 1;
break;
case USB_DEVICE_U2_ENABLE:
if (mtu->g.speed < USB_SPEED_SUPER ||
mtu->g.state != USB_STATE_CONFIGURED)
break;
lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
if (set)
lpc |= SW_U2_ACCEPT_ENABLE;
else
lpc &= ~SW_U2_ACCEPT_ENABLE;
mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
mtu->u2_enable = !!set;
handled = 1;
break;
default:
handled = -EINVAL;
break;
}
return handled;
}
static int ep0_handle_feature(struct mtu3 *mtu,
struct usb_ctrlrequest *setup, bool set)
{
struct mtu3_ep *mep;
int handled = -EINVAL;
int is_in;
u16 value;
u16 index;
u8 epnum;
value = le16_to_cpu(setup->wValue);
index = le16_to_cpu(setup->wIndex);
switch (setup->bRequestType & USB_RECIP_MASK) {
case USB_RECIP_DEVICE:
handled = ep0_handle_feature_dev(mtu, setup, set);
break;
case USB_RECIP_INTERFACE:
/* superspeed only */
if (value == USB_INTRF_FUNC_SUSPEND &&
mtu->g.speed >= USB_SPEED_SUPER) {
/*
* forward the request because function drivers
* should handle it
*/
handled = 0;
}
break;
case USB_RECIP_ENDPOINT:
epnum = index & USB_ENDPOINT_NUMBER_MASK;
if (epnum == 0 || epnum >= mtu->num_eps ||
value != USB_ENDPOINT_HALT)
break;
is_in = index & USB_DIR_IN;
mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum;
if (!mep->desc)
break;
handled = 1;
/* ignore request if endpoint is wedged */
if (mep->wedged)
break;
mtu3_ep_stall_set(mep, set);
break;
default:
/* class, vendor, etc ... delegate */
handled = 0;
break;
}
return handled;
}
/*
* handle all control requests can be handled
* returns:
* negative errno - error happened
* zero - need delegate SETUP to gadget driver
* positive - already handled
*/
static int handle_standard_request(struct mtu3 *mtu,
struct usb_ctrlrequest *setup)
{
void __iomem *mbase = mtu->mac_base;
enum usb_device_state state = mtu->g.state;
int handled = -EINVAL;
u32 dev_conf;
u16 value;
value = le16_to_cpu(setup->wValue);
/* the gadget driver handles everything except what we must handle */
switch (setup->bRequest) {
case USB_REQ_SET_ADDRESS:
/* change it after the status stage */
mtu->address = (u8) (value & 0x7f);
dev_dbg(mtu->dev, "set address to 0x%x\n", mtu->address);
dev_conf = mtu3_readl(mbase, U3D_DEVICE_CONF);
dev_conf &= ~DEV_ADDR_MSK;
dev_conf |= DEV_ADDR(mtu->address);
mtu3_writel(mbase, U3D_DEVICE_CONF, dev_conf);
if (mtu->address)
usb_gadget_set_state(&mtu->g, USB_STATE_ADDRESS);
else
usb_gadget_set_state(&mtu->g, USB_STATE_DEFAULT);
handled = 1;
break;
case USB_REQ_SET_CONFIGURATION:
if (state == USB_STATE_ADDRESS) {
usb_gadget_set_state(&mtu->g,
USB_STATE_CONFIGURED);
} else if (state == USB_STATE_CONFIGURED) {
/*
* USB2 spec sec 9.4.7, if wValue is 0 then dev
* is moved to addressed state
*/
if (!value)
usb_gadget_set_state(&mtu->g,
USB_STATE_ADDRESS);
}
handled = 0;
break;
case USB_REQ_CLEAR_FEATURE:
handled = ep0_handle_feature(mtu, setup, 0);
break;
case USB_REQ_SET_FEATURE:
handled = ep0_handle_feature(mtu, setup, 1);
break;
case USB_REQ_GET_STATUS:
handled = ep0_get_status(mtu, setup);
break;
case USB_REQ_SET_SEL:
handled = ep0_set_sel(mtu, setup);
break;
case USB_REQ_SET_ISOCH_DELAY:
handled = 1;
break;
default:
/* delegate SET_CONFIGURATION, etc */
handled = 0;
}
return handled;
}
/* receive an data packet (OUT) */
static void ep0_rx_state(struct mtu3 *mtu)
{
struct mtu3_request *mreq;
struct usb_request *req;
void __iomem *mbase = mtu->mac_base;
u32 maxp;
u32 csr;
u16 count = 0;
dev_dbg(mtu->dev, "%s\n", __func__);
csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
mreq = next_ep0_request(mtu);
req = &mreq->request;
/* read packet and ack; or stall because of gadget driver bug */
if (req) {
void *buf = req->buf + req->actual;
unsigned int len = req->length - req->actual;
/* read the buffer */
count = mtu3_readl(mbase, U3D_RXCOUNT0);
if (count > len) {
req->status = -EOVERFLOW;
count = len;
}
ep0_read_fifo(mtu->ep0, buf, count);
req->actual += count;
csr |= EP0_RXPKTRDY;
maxp = mtu->g.ep0->maxpacket;
if (count < maxp || req->actual == req->length) {
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
dev_dbg(mtu->dev, "ep0 state: %s\n",
decode_ep0_state(mtu));
csr |= EP0_DATAEND;
} else {
req = NULL;
}
} else {
csr |= EP0_RXPKTRDY | EP0_SENDSTALL;
dev_dbg(mtu->dev, "%s: SENDSTALL\n", __func__);
}
mtu3_writel(mbase, U3D_EP0CSR, csr);
/* give back the request if have received all data */
if (req)
ep0_req_giveback(mtu, req);
}
/* transmitting to the host (IN) */
static void ep0_tx_state(struct mtu3 *mtu)
{
struct mtu3_request *mreq = next_ep0_request(mtu);
struct usb_request *req;
u32 csr;
u8 *src;
u8 count;
u32 maxp;
dev_dbg(mtu->dev, "%s\n", __func__);
if (!mreq)
return;
maxp = mtu->g.ep0->maxpacket;
req = &mreq->request;
/* load the data */
src = (u8 *)req->buf + req->actual;
count = min(maxp, req->length - req->actual);
if (count)
ep0_write_fifo(mtu->ep0, src, count);
dev_dbg(mtu->dev, "%s act=%d, len=%d, cnt=%d, maxp=%d zero=%d\n",
__func__, req->actual, req->length, count, maxp, req->zero);
req->actual += count;
if ((count < maxp)
|| ((req->actual == req->length) && !req->zero))
mtu->ep0_state = MU3D_EP0_STATE_TX_END;
/* send it out, triggering a "txpktrdy cleared" irq */
csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr | EP0_TXPKTRDY);
dev_dbg(mtu->dev, "%s ep0csr=0x%x\n", __func__,
mtu3_readl(mtu->mac_base, U3D_EP0CSR));
}
static void ep0_read_setup(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
{
struct mtu3_request *mreq;
u32 count;
u32 csr;
csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
count = mtu3_readl(mtu->mac_base, U3D_RXCOUNT0);
ep0_read_fifo(mtu->ep0, (u8 *)setup, count);
dev_dbg(mtu->dev, "SETUP req%02x.%02x v%04x i%04x l%04x\n",
setup->bRequestType, setup->bRequest,
le16_to_cpu(setup->wValue), le16_to_cpu(setup->wIndex),
le16_to_cpu(setup->wLength));
/* clean up any leftover transfers */
mreq = next_ep0_request(mtu);
if (mreq)
ep0_req_giveback(mtu, &mreq->request);
if (le16_to_cpu(setup->wLength) == 0) {
; /* no data stage, nothing to do */
} else if (setup->bRequestType & USB_DIR_IN) {
mtu3_writel(mtu->mac_base, U3D_EP0CSR,
csr | EP0_SETUPPKTRDY | EP0_DPHTX);
mtu->ep0_state = MU3D_EP0_STATE_TX;
} else {
mtu3_writel(mtu->mac_base, U3D_EP0CSR,
(csr | EP0_SETUPPKTRDY) & (~EP0_DPHTX));
mtu->ep0_state = MU3D_EP0_STATE_RX;
}
}
static int ep0_handle_setup(struct mtu3 *mtu)
__releases(mtu->lock)
__acquires(mtu->lock)
{
struct usb_ctrlrequest setup;
struct mtu3_request *mreq;
void __iomem *mbase = mtu->mac_base;
int handled = 0;
ep0_read_setup(mtu, &setup);
if ((setup.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
handled = handle_standard_request(mtu, &setup);
dev_dbg(mtu->dev, "handled %d, ep0_state: %s\n",
handled, decode_ep0_state(mtu));
if (handled < 0)
goto stall;
else if (handled > 0)
goto finish;
handled = forward_to_driver(mtu, &setup);
if (handled < 0) {
stall:
dev_dbg(mtu->dev, "%s stall (%d)\n", __func__, handled);
ep0_stall_set(mtu->ep0, true,
le16_to_cpu(setup.wLength) ? 0 : EP0_SETUPPKTRDY);
return 0;
}
finish:
if (mtu->test_mode) {
; /* nothing to do */
} else if (handled == USB_GADGET_DELAYED_STATUS) {
/* handle the delay STATUS phase till receive ep_queue on ep0 */
mtu->delayed_status = true;
} else if (le16_to_cpu(setup.wLength) == 0) { /* no data stage */
mtu3_writel(mbase, U3D_EP0CSR,
(mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS)
| EP0_SETUPPKTRDY | EP0_DATAEND);
/* complete zlp request directly */
mreq = next_ep0_request(mtu);
if (mreq && !mreq->request.length)
ep0_req_giveback(mtu, &mreq->request);
}
return 0;
}
irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu)
{
void __iomem *mbase = mtu->mac_base;
struct mtu3_request *mreq;
u32 int_status;
irqreturn_t ret = IRQ_NONE;
u32 csr;
u32 len;
int_status = mtu3_readl(mbase, U3D_EPISR);
int_status &= mtu3_readl(mbase, U3D_EPIER);
mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */
/* only handle ep0's */
if (!(int_status & EP0ISR))
return IRQ_NONE;
csr = mtu3_readl(mbase, U3D_EP0CSR);
dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr);
/* we sent a stall.. need to clear it now.. */
if (csr & EP0_SENTSTALL) {
ep0_stall_set(mtu->ep0, false, 0);
csr = mtu3_readl(mbase, U3D_EP0CSR);
ret = IRQ_HANDLED;
}
dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu));
switch (mtu->ep0_state) {
case MU3D_EP0_STATE_TX:
/* irq on clearing txpktrdy */
if ((csr & EP0_FIFOFULL) == 0) {
ep0_tx_state(mtu);
ret = IRQ_HANDLED;
}
break;
case MU3D_EP0_STATE_RX:
/* irq on set rxpktrdy */
if (csr & EP0_RXPKTRDY) {
ep0_rx_state(mtu);
ret = IRQ_HANDLED;
}
break;
case MU3D_EP0_STATE_TX_END:
mtu3_writel(mbase, U3D_EP0CSR,
(csr & EP0_W1C_BITS) | EP0_DATAEND);
mreq = next_ep0_request(mtu);
if (mreq)
ep0_req_giveback(mtu, &mreq->request);
mtu->ep0_state = MU3D_EP0_STATE_SETUP;
ret = IRQ_HANDLED;
dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu));
break;
case MU3D_EP0_STATE_SETUP:
if (!(csr & EP0_SETUPPKTRDY))
break;
len = mtu3_readl(mbase, U3D_RXCOUNT0);
if (len != 8) {
dev_err(mtu->dev, "SETUP packet len %d != 8 ?\n", len);
break;
}
ep0_handle_setup(mtu);
ret = IRQ_HANDLED;
break;
default:
/* can't happen */
ep0_stall_set(mtu->ep0, true, 0);
WARN_ON(1);
break;
}
return ret;
}
static int mtu3_ep0_enable(struct usb_ep *ep,
const struct usb_endpoint_descriptor *desc)
{
/* always enabled */
return -EINVAL;
}
static int mtu3_ep0_disable(struct usb_ep *ep)
{
/* always enabled */
return -EINVAL;
}
static int ep0_queue(struct mtu3_ep *mep, struct mtu3_request *mreq)
{
struct mtu3 *mtu = mep->mtu;
mreq->mtu = mtu;
mreq->request.actual = 0;
mreq->request.status = -EINPROGRESS;
dev_dbg(mtu->dev, "%s %s (ep0_state: %s), len#%d\n", __func__,
mep->name, decode_ep0_state(mtu), mreq->request.length);
switch (mtu->ep0_state) {
case MU3D_EP0_STATE_SETUP:
case MU3D_EP0_STATE_RX: /* control-OUT data */
case MU3D_EP0_STATE_TX: /* control-IN data */
break;
default:
dev_err(mtu->dev, "%s, error in ep0 state %s\n", __func__,
decode_ep0_state(mtu));
return -EINVAL;
}
if (mtu->delayed_status) {
u32 csr;
mtu->delayed_status = false;
csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
csr |= EP0_SETUPPKTRDY | EP0_DATAEND;
mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
/* needn't giveback the request for handling delay STATUS */
return 0;
}
if (!list_empty(&mep->req_list))
return -EBUSY;
list_add_tail(&mreq->list, &mep->req_list);
/* sequence #1, IN ... start writing the data */
if (mtu->ep0_state == MU3D_EP0_STATE_TX)
ep0_tx_state(mtu);
return 0;
}
static int mtu3_ep0_queue(struct usb_ep *ep,
struct usb_request *req, gfp_t gfp)
{
struct mtu3_ep *mep;
struct mtu3_request *mreq;
struct mtu3 *mtu;
unsigned long flags;
int ret = 0;
if (!ep || !req)
return -EINVAL;
mep = to_mtu3_ep(ep);
mtu = mep->mtu;
mreq = to_mtu3_request(req);
spin_lock_irqsave(&mtu->lock, flags);
ret = ep0_queue(mep, mreq);
spin_unlock_irqrestore(&mtu->lock, flags);
return ret;
}
static int mtu3_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
{
/* we just won't support this */
return -EINVAL;
}
static int mtu3_ep0_halt(struct usb_ep *ep, int value)
{
struct mtu3_ep *mep;
struct mtu3 *mtu;
unsigned long flags;
int ret = 0;
if (!ep || !value)
return -EINVAL;
mep = to_mtu3_ep(ep);
mtu = mep->mtu;
dev_dbg(mtu->dev, "%s\n", __func__);
spin_lock_irqsave(&mtu->lock, flags);
if (!list_empty(&mep->req_list)) {
ret = -EBUSY;
goto cleanup;
}
switch (mtu->ep0_state) {
/*
* stalls are usually issued after parsing SETUP packet, either
* directly in irq context from setup() or else later.
*/
case MU3D_EP0_STATE_TX:
case MU3D_EP0_STATE_TX_END:
case MU3D_EP0_STATE_RX:
case MU3D_EP0_STATE_SETUP:
ep0_stall_set(mtu->ep0, true, 0);
break;
default:
dev_dbg(mtu->dev, "ep0 can't halt in state %s\n",
decode_ep0_state(mtu));
ret = -EINVAL;
}
cleanup:
spin_unlock_irqrestore(&mtu->lock, flags);
return ret;
}
const struct usb_ep_ops mtu3_ep0_ops = {
.enable = mtu3_ep0_enable,
.disable = mtu3_ep0_disable,
.alloc_request = mtu3_alloc_request,
.free_request = mtu3_free_request,
.queue = mtu3_ep0_queue,
.dequeue = mtu3_ep0_dequeue,
.set_halt = mtu3_ep0_halt,
};
Reference in New Issue View Git Blame Copy Permalink