mirror of https://gitee.com/openkylin/linux.git
135 lines
3.5 KiB
Plaintext
135 lines
3.5 KiB
Plaintext
Qualcomm ADSP Peripheral Image Loader
|
|
|
|
This document defines the binding for a component that loads and boots firmware
|
|
on the Qualcomm ADSP Hexagon core.
|
|
|
|
- compatible:
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: must be one of:
|
|
"qcom,msm8974-adsp-pil"
|
|
"qcom,msm8996-adsp-pil"
|
|
"qcom,msm8996-slpi-pil"
|
|
|
|
- interrupts-extended:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: must list the watchdog, fatal IRQs ready, handover and
|
|
stop-ack IRQs
|
|
|
|
- interrupt-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
|
|
|
|
- clocks:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: reference to the xo clock and optionally aggre2 clock to be
|
|
held on behalf of the booting Hexagon core
|
|
|
|
- clock-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: must be "xo" and optionally include "aggre2"
|
|
|
|
- cx-supply:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to the regulator to be held on behalf of the
|
|
booting Hexagon core
|
|
|
|
- px-supply:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to the px regulator to be held on behalf of the
|
|
booting Hexagon core
|
|
|
|
- memory-region:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to the reserved-memory for the ADSP
|
|
|
|
- qcom,smem-states:
|
|
Usage: required
|
|
Value type: <phandle>
|
|
Definition: reference to the smem state for requesting the ADSP to
|
|
shut down
|
|
|
|
- qcom,smem-state-names:
|
|
Usage: required
|
|
Value type: <stringlist>
|
|
Definition: must be "stop"
|
|
|
|
|
|
= SUBNODES
|
|
The adsp node may have an subnode named either "smd-edge" or "glink-edge" that
|
|
describes the communication edge, channels and devices related to the ADSP.
|
|
See ../soc/qcom/qcom,smd.txt and ../soc/qcom/qcom,glink.txt for details on how
|
|
to describe these.
|
|
|
|
|
|
= EXAMPLE
|
|
The following example describes the resources needed to boot control the
|
|
ADSP, as it is found on MSM8974 boards.
|
|
|
|
adsp {
|
|
compatible = "qcom,msm8974-adsp-pil";
|
|
|
|
interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog",
|
|
"fatal",
|
|
"ready",
|
|
"handover",
|
|
"stop-ack";
|
|
|
|
clocks = <&rpmcc RPM_CXO_CLK>;
|
|
clock-names = "xo";
|
|
|
|
cx-supply = <&pm8841_s2>;
|
|
|
|
memory-region = <&adsp_region>;
|
|
|
|
qcom,smem-states = <&adsp_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
smd-edge {
|
|
interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 8>;
|
|
qcom,smd-edge = <1>;
|
|
};
|
|
};
|
|
|
|
The following example describes the resources needed to boot control the
|
|
SLPI, as it is found on MSM8996 boards.
|
|
|
|
slpi {
|
|
compatible = "qcom,msm8996-slpi-pil";
|
|
interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
|
|
<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog",
|
|
"fatal",
|
|
"ready",
|
|
"handover",
|
|
"stop-ack";
|
|
|
|
clocks = <&rpmcc MSM8996_RPM_SMD_XO_CLK_SRC>,
|
|
<&rpmcc MSM8996_RPM_SMD_AGGR2_NOC_CLK>;
|
|
clock-names = "xo", "aggre2";
|
|
|
|
cx-supply = <&pm8994_l26>;
|
|
px-supply = <&pm8994_lvs2>;
|
|
|
|
memory-region = <&slpi_region>;
|
|
qcom,smem-states = <&slpi_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
};
|