mirror of https://gitee.com/openkylin/linux.git
62 lines
2.4 KiB
Plaintext
62 lines
2.4 KiB
Plaintext
pwm-backlight bindings
|
|
|
|
Required properties:
|
|
- compatible: "pwm-backlight"
|
|
- pwms: OF device-tree PWM specification (see PWM binding[0])
|
|
- power-supply: regulator for supply voltage
|
|
|
|
Optional properties:
|
|
- pwm-names: a list of names for the PWM devices specified in the
|
|
"pwms" property (see PWM binding[0])
|
|
- enable-gpios: contains a single GPIO specifier for the GPIO which enables
|
|
and disables the backlight (see GPIO binding[1])
|
|
- post-pwm-on-delay-ms: Delay in ms between setting an initial (non-zero) PWM
|
|
and enabling the backlight using GPIO.
|
|
- pwm-off-delay-ms: Delay in ms between disabling the backlight using GPIO
|
|
and setting PWM value to 0.
|
|
- brightness-levels: Array of distinct brightness levels. Typically these
|
|
are in the range from 0 to 255, but any range starting at
|
|
0 will do. The actual brightness level (PWM duty cycle)
|
|
will be interpolated from these values. 0 means a 0% duty
|
|
cycle (darkest/off), while the last value in the array
|
|
represents a 100% duty cycle (brightest).
|
|
- default-brightness-level: The default brightness level (index into the
|
|
array defined by the "brightness-levels" property).
|
|
- num-interpolated-steps: Number of interpolated steps between each value
|
|
of brightness-levels table. This way a high
|
|
resolution pwm duty cycle can be used without
|
|
having to list out every possible value in the
|
|
brightness-level array.
|
|
|
|
[0]: Documentation/devicetree/bindings/pwm/pwm.txt
|
|
[1]: Documentation/devicetree/bindings/gpio/gpio.txt
|
|
|
|
Example:
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 5000000>;
|
|
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
|
|
power-supply = <&vdd_bl_reg>;
|
|
enable-gpios = <&gpio 58 0>;
|
|
post-pwm-on-delay-ms = <10>;
|
|
pwm-off-delay-ms = <10>;
|
|
};
|
|
|
|
Example using num-interpolation-steps:
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 5000000>;
|
|
|
|
brightness-levels = <0 2048 4096 8192 16384 65535>;
|
|
num-interpolated-steps = <2048>;
|
|
default-brightness-level = <4096>;
|
|
|
|
power-supply = <&vdd_bl_reg>;
|
|
enable-gpios = <&gpio 58 0>;
|
|
};
|