mirror of https://gitee.com/openkylin/linux.git
45 lines
1.2 KiB
Plaintext
45 lines
1.2 KiB
Plaintext
* Single Byte SPI LED Device Driver.
|
|
|
|
The driver can be used for controllers with a very simple SPI protocol:
|
|
- one LED is controlled by a single byte on MOSI
|
|
- the value of the byte gives the brightness between two values (lowest to
|
|
highest)
|
|
- no return value is necessary (no MISO signal)
|
|
|
|
The value for lowest and highest brightness is dependent on the device and
|
|
therefore on the compatible string.
|
|
|
|
Depending on the compatible string some special functions (like hardware
|
|
accelerated blinking) might can be supported too.
|
|
|
|
The driver currently only supports one LED. The properties of the LED are
|
|
configured in a sub-node in the device node.
|
|
|
|
Required properties:
|
|
- compatible: should be one of
|
|
* "ubnt,acb-spi-led" microcontroller (SONiX 8F26E611LA) based device
|
|
used for example in Ubiquiti airCube ISP
|
|
|
|
Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
|
|
apply.
|
|
|
|
LED sub-node properties:
|
|
- label:
|
|
see Documentation/devicetree/bindings/leds/common.txt
|
|
- default-state:
|
|
see Documentation/devicetree/bindings/leds/common.txt
|
|
Only "on" and "off" are supported.
|
|
|
|
Example:
|
|
|
|
led-controller@0 {
|
|
compatible = "ubnt,acb-spi-led";
|
|
reg = <0>;
|
|
spi-max-frequency = <100000>;
|
|
|
|
led {
|
|
label = "white:status";
|
|
default-state = "on";
|
|
};
|
|
};
|