mirror of https://gitee.com/openkylin/linux.git
153 lines
5.4 KiB
Plaintext
153 lines
5.4 KiB
Plaintext
Booting AArch64 Linux
|
|
=====================
|
|
|
|
Author: Will Deacon <will.deacon@arm.com>
|
|
Date : 07 September 2012
|
|
|
|
This document is based on the ARM booting document by Russell King and
|
|
is relevant to all public releases of the AArch64 Linux kernel.
|
|
|
|
The AArch64 exception model is made up of a number of exception levels
|
|
(EL0 - EL3), with EL0 and EL1 having a secure and a non-secure
|
|
counterpart. EL2 is the hypervisor level and exists only in non-secure
|
|
mode. EL3 is the highest priority level and exists only in secure mode.
|
|
|
|
For the purposes of this document, we will use the term `boot loader'
|
|
simply to define all software that executes on the CPU(s) before control
|
|
is passed to the Linux kernel. This may include secure monitor and
|
|
hypervisor code, or it may just be a handful of instructions for
|
|
preparing a minimal boot environment.
|
|
|
|
Essentially, the boot loader should provide (as a minimum) the
|
|
following:
|
|
|
|
1. Setup and initialise the RAM
|
|
2. Setup the device tree
|
|
3. Decompress the kernel image
|
|
4. Call the kernel image
|
|
|
|
|
|
1. Setup and initialise RAM
|
|
---------------------------
|
|
|
|
Requirement: MANDATORY
|
|
|
|
The boot loader is expected to find and initialise all RAM that the
|
|
kernel will use for volatile data storage in the system. It performs
|
|
this in a machine dependent manner. (It may use internal algorithms
|
|
to automatically locate and size all RAM, or it may use knowledge of
|
|
the RAM in the machine, or any other method the boot loader designer
|
|
sees fit.)
|
|
|
|
|
|
2. Setup the device tree
|
|
-------------------------
|
|
|
|
Requirement: MANDATORY
|
|
|
|
The device tree blob (dtb) must be no bigger than 2 megabytes in size
|
|
and placed at a 2-megabyte boundary within the first 512 megabytes from
|
|
the start of the kernel image. This is to allow the kernel to map the
|
|
blob using a single section mapping in the initial page tables.
|
|
|
|
|
|
3. Decompress the kernel image
|
|
------------------------------
|
|
|
|
Requirement: OPTIONAL
|
|
|
|
The AArch64 kernel does not currently provide a decompressor and
|
|
therefore requires decompression (gzip etc.) to be performed by the boot
|
|
loader if a compressed Image target (e.g. Image.gz) is used. For
|
|
bootloaders that do not implement this requirement, the uncompressed
|
|
Image target is available instead.
|
|
|
|
|
|
4. Call the kernel image
|
|
------------------------
|
|
|
|
Requirement: MANDATORY
|
|
|
|
The decompressed kernel image contains a 32-byte header as follows:
|
|
|
|
u32 magic = 0x14000008; /* branch to stext, little-endian */
|
|
u32 res0 = 0; /* reserved */
|
|
u64 text_offset; /* Image load offset */
|
|
u64 res1 = 0; /* reserved */
|
|
u64 res2 = 0; /* reserved */
|
|
|
|
The image must be placed at the specified offset (currently 0x80000)
|
|
from the start of the system RAM and called there. The start of the
|
|
system RAM must be aligned to 2MB.
|
|
|
|
Before jumping into the kernel, the following conditions must be met:
|
|
|
|
- Quiesce all DMA capable devices so that memory does not get
|
|
corrupted by bogus network packets or disk data. This will save
|
|
you many hours of debug.
|
|
|
|
- Primary CPU general-purpose register settings
|
|
x0 = physical address of device tree blob (dtb) in system RAM.
|
|
x1 = 0 (reserved for future use)
|
|
x2 = 0 (reserved for future use)
|
|
x3 = 0 (reserved for future use)
|
|
|
|
- CPU mode
|
|
All forms of interrupts must be masked in PSTATE.DAIF (Debug, SError,
|
|
IRQ and FIQ).
|
|
The CPU must be in either EL2 (RECOMMENDED in order to have access to
|
|
the virtualisation extensions) or non-secure EL1.
|
|
|
|
- Caches, MMUs
|
|
The MMU must be off.
|
|
Instruction cache may be on or off.
|
|
Data cache must be off and invalidated.
|
|
External caches (if present) must be configured and disabled.
|
|
|
|
- Architected timers
|
|
CNTFRQ must be programmed with the timer frequency.
|
|
If entering the kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0)
|
|
set where available.
|
|
|
|
- Coherency
|
|
All CPUs to be booted by the kernel must be part of the same coherency
|
|
domain on entry to the kernel. This may require IMPLEMENTATION DEFINED
|
|
initialisation to enable the receiving of maintenance operations on
|
|
each CPU.
|
|
|
|
- System registers
|
|
All writable architected system registers at the exception level where
|
|
the kernel image will be entered must be initialised by software at a
|
|
higher exception level to prevent execution in an UNKNOWN state.
|
|
|
|
The boot loader is expected to enter the kernel on each CPU in the
|
|
following manner:
|
|
|
|
- The primary CPU must jump directly to the first instruction of the
|
|
kernel image. The device tree blob passed by this CPU must contain
|
|
for each CPU node:
|
|
|
|
1. An 'enable-method' property. Currently, the only supported value
|
|
for this field is the string "spin-table".
|
|
|
|
2. A 'cpu-release-addr' property identifying a 64-bit,
|
|
zero-initialised memory location.
|
|
|
|
It is expected that the bootloader will generate these device tree
|
|
properties and insert them into the blob prior to kernel entry.
|
|
|
|
- Any secondary CPUs must spin outside of the kernel in a reserved area
|
|
of memory (communicated to the kernel by a /memreserve/ region in the
|
|
device tree) polling their cpu-release-addr location, which must be
|
|
contained in the reserved region. A wfe instruction may be inserted
|
|
to reduce the overhead of the busy-loop and a sev will be issued by
|
|
the primary CPU. When a read of the location pointed to by the
|
|
cpu-release-addr returns a non-zero value, the CPU must jump directly
|
|
to this value.
|
|
|
|
- Secondary CPU general-purpose register settings
|
|
x0 = 0 (reserved for future use)
|
|
x1 = 0 (reserved for future use)
|
|
x2 = 0 (reserved for future use)
|
|
x3 = 0 (reserved for future use)
|