mirror of https://gitee.com/openkylin/linux.git
236 lines
5.6 KiB
C
236 lines
5.6 KiB
C
/*
|
|
* SDHCI support for SiRF primaII and marco SoCs
|
|
*
|
|
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
|
|
*
|
|
* Licensed under GPLv2 or later.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/mmc/slot-gpio.h>
|
|
#include "sdhci-pltfm.h"
|
|
|
|
#define SDHCI_CLK_DELAY_SETTING 0x4C
|
|
#define SDHCI_SIRF_8BITBUS BIT(3)
|
|
#define SIRF_TUNING_COUNT 16384
|
|
|
|
static void sdhci_sirf_set_bus_width(struct sdhci_host *host, int width)
|
|
{
|
|
u8 ctrl;
|
|
|
|
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
|
|
ctrl &= ~(SDHCI_CTRL_4BITBUS | SDHCI_SIRF_8BITBUS);
|
|
|
|
/*
|
|
* CSR atlas7 and prima2 SD host version is not 3.0
|
|
* 8bit-width enable bit of CSR SD hosts is 3,
|
|
* while stardard hosts use bit 5
|
|
*/
|
|
if (width == MMC_BUS_WIDTH_8)
|
|
ctrl |= SDHCI_SIRF_8BITBUS;
|
|
else if (width == MMC_BUS_WIDTH_4)
|
|
ctrl |= SDHCI_CTRL_4BITBUS;
|
|
|
|
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
|
|
}
|
|
|
|
static u32 sdhci_sirf_readl_le(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 val = readl(host->ioaddr + reg);
|
|
|
|
if (unlikely((reg == SDHCI_CAPABILITIES_1) &&
|
|
(host->mmc->caps & MMC_CAP_UHS_SDR50))) {
|
|
/* fake CAP_1 register */
|
|
val = SDHCI_SUPPORT_DDR50 |
|
|
SDHCI_SUPPORT_SDR50 | SDHCI_USE_SDR50_TUNING;
|
|
}
|
|
|
|
if (unlikely(reg == SDHCI_SLOT_INT_STATUS)) {
|
|
u32 prss = val;
|
|
/* fake chips as V3.0 host conreoller */
|
|
prss &= ~(0xFF << 16);
|
|
val = prss | (SDHCI_SPEC_300 << 16);
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static u16 sdhci_sirf_readw_le(struct sdhci_host *host, int reg)
|
|
{
|
|
u16 ret = 0;
|
|
|
|
ret = readw(host->ioaddr + reg);
|
|
|
|
if (unlikely(reg == SDHCI_HOST_VERSION)) {
|
|
ret = readw(host->ioaddr + SDHCI_HOST_VERSION);
|
|
ret |= SDHCI_SPEC_300;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_sirf_execute_tuning(struct sdhci_host *host, u32 opcode)
|
|
{
|
|
int tuning_seq_cnt = 3;
|
|
int phase;
|
|
u8 tuned_phase_cnt = 0;
|
|
int rc = 0, longest_range = 0;
|
|
int start = -1, end = 0, tuning_value = -1, range = 0;
|
|
u16 clock_setting;
|
|
struct mmc_host *mmc = host->mmc;
|
|
|
|
clock_setting = sdhci_readw(host, SDHCI_CLK_DELAY_SETTING);
|
|
clock_setting &= ~0x3fff;
|
|
|
|
retry:
|
|
phase = 0;
|
|
tuned_phase_cnt = 0;
|
|
do {
|
|
sdhci_writel(host,
|
|
clock_setting | phase,
|
|
SDHCI_CLK_DELAY_SETTING);
|
|
|
|
if (!mmc_send_tuning(mmc, opcode, NULL)) {
|
|
/* Tuning is successful at this tuning point */
|
|
tuned_phase_cnt++;
|
|
dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
|
|
mmc_hostname(mmc), phase);
|
|
if (start == -1)
|
|
start = phase;
|
|
end = phase;
|
|
range++;
|
|
if (phase == (SIRF_TUNING_COUNT - 1)
|
|
&& range > longest_range)
|
|
tuning_value = (start + end) / 2;
|
|
} else {
|
|
dev_dbg(mmc_dev(mmc), "%s: Found bad phase = %d\n",
|
|
mmc_hostname(mmc), phase);
|
|
if (range > longest_range) {
|
|
tuning_value = (start + end) / 2;
|
|
longest_range = range;
|
|
}
|
|
start = -1;
|
|
end = range = 0;
|
|
}
|
|
} while (++phase < SIRF_TUNING_COUNT);
|
|
|
|
if (tuned_phase_cnt && tuning_value > 0) {
|
|
/*
|
|
* Finally set the selected phase in delay
|
|
* line hw block.
|
|
*/
|
|
phase = tuning_value;
|
|
sdhci_writel(host,
|
|
clock_setting | phase,
|
|
SDHCI_CLK_DELAY_SETTING);
|
|
|
|
dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
|
|
mmc_hostname(mmc), phase);
|
|
} else {
|
|
if (--tuning_seq_cnt)
|
|
goto retry;
|
|
/* Tuning failed */
|
|
dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n",
|
|
mmc_hostname(mmc));
|
|
rc = -EIO;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static const struct sdhci_ops sdhci_sirf_ops = {
|
|
.read_l = sdhci_sirf_readl_le,
|
|
.read_w = sdhci_sirf_readw_le,
|
|
.platform_execute_tuning = sdhci_sirf_execute_tuning,
|
|
.set_clock = sdhci_set_clock,
|
|
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
|
|
.set_bus_width = sdhci_sirf_set_bus_width,
|
|
.reset = sdhci_reset,
|
|
.set_uhs_signaling = sdhci_set_uhs_signaling,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_sirf_pdata = {
|
|
.ops = &sdhci_sirf_ops,
|
|
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
|
|
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
|
|
SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
|
|
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
|
|
};
|
|
|
|
static int sdhci_sirf_probe(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host;
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "unable to get clock");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
host = sdhci_pltfm_init(pdev, &sdhci_sirf_pdata, 0);
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
pltfm_host = sdhci_priv(host);
|
|
pltfm_host->clk = clk;
|
|
|
|
sdhci_get_of_property(pdev);
|
|
|
|
ret = clk_prepare_enable(pltfm_host->clk);
|
|
if (ret)
|
|
goto err_clk_prepare;
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret)
|
|
goto err_sdhci_add;
|
|
|
|
/*
|
|
* We must request the IRQ after sdhci_add_host(), as the tasklet only
|
|
* gets setup in sdhci_add_host() and we oops.
|
|
*/
|
|
ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL);
|
|
if (ret == -EPROBE_DEFER)
|
|
goto err_request_cd;
|
|
if (!ret)
|
|
mmc_gpiod_request_cd_irq(host->mmc);
|
|
|
|
return 0;
|
|
|
|
err_request_cd:
|
|
sdhci_remove_host(host, 0);
|
|
err_sdhci_add:
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
err_clk_prepare:
|
|
sdhci_pltfm_free(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id sdhci_sirf_of_match[] = {
|
|
{ .compatible = "sirf,prima2-sdhc" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sdhci_sirf_of_match);
|
|
|
|
static struct platform_driver sdhci_sirf_driver = {
|
|
.driver = {
|
|
.name = "sdhci-sirf",
|
|
.of_match_table = sdhci_sirf_of_match,
|
|
.pm = &sdhci_pltfm_pmops,
|
|
},
|
|
.probe = sdhci_sirf_probe,
|
|
.remove = sdhci_pltfm_unregister,
|
|
};
|
|
|
|
module_platform_driver(sdhci_sirf_driver);
|
|
|
|
MODULE_DESCRIPTION("SDHCI driver for SiRFprimaII/SiRFmarco");
|
|
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|