mirror of https://gitee.com/openkylin/linux.git
331 lines
7.2 KiB
C
331 lines
7.2 KiB
C
/*
|
|
* Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
|
|
*
|
|
* Original author:
|
|
* Ben Collins <bcollins@ubuntu.com>
|
|
*
|
|
* Additional work by:
|
|
* John Brooks <john.brooks@bluecherry.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
/* XXX: The SOLO6x10 i2c does not have separate interrupts for each i2c
|
|
* channel. The bus can only handle one i2c event at a time. The below handles
|
|
* this all wrong. We should be using the status registers to see if the bus
|
|
* is in use, and have a global lock to check the status register. Also,
|
|
* the bulk of the work should be handled out-of-interrupt. The ugly loops
|
|
* that occur during interrupt scare me. The ISR should merely signal
|
|
* thread context, ACK the interrupt, and move on. -- BenC */
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include "solo6x10.h"
|
|
|
|
u8 solo_i2c_readbyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off)
|
|
{
|
|
struct i2c_msg msgs[2];
|
|
u8 data;
|
|
|
|
msgs[0].flags = 0;
|
|
msgs[0].addr = addr;
|
|
msgs[0].len = 1;
|
|
msgs[0].buf = &off;
|
|
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].addr = addr;
|
|
msgs[1].len = 1;
|
|
msgs[1].buf = &data;
|
|
|
|
i2c_transfer(&solo_dev->i2c_adap[id], msgs, 2);
|
|
|
|
return data;
|
|
}
|
|
|
|
void solo_i2c_writebyte(struct solo_dev *solo_dev, int id, u8 addr,
|
|
u8 off, u8 data)
|
|
{
|
|
struct i2c_msg msgs;
|
|
u8 buf[2];
|
|
|
|
buf[0] = off;
|
|
buf[1] = data;
|
|
msgs.flags = 0;
|
|
msgs.addr = addr;
|
|
msgs.len = 2;
|
|
msgs.buf = buf;
|
|
|
|
i2c_transfer(&solo_dev->i2c_adap[id], &msgs, 1);
|
|
}
|
|
|
|
static void solo_i2c_flush(struct solo_dev *solo_dev, int wr)
|
|
{
|
|
u32 ctrl;
|
|
|
|
ctrl = SOLO_IIC_CH_SET(solo_dev->i2c_id);
|
|
|
|
if (solo_dev->i2c_state == IIC_STATE_START)
|
|
ctrl |= SOLO_IIC_START;
|
|
|
|
if (wr) {
|
|
ctrl |= SOLO_IIC_WRITE;
|
|
} else {
|
|
ctrl |= SOLO_IIC_READ;
|
|
if (!(solo_dev->i2c_msg->flags & I2C_M_NO_RD_ACK))
|
|
ctrl |= SOLO_IIC_ACK_EN;
|
|
}
|
|
|
|
if (solo_dev->i2c_msg_ptr == solo_dev->i2c_msg->len)
|
|
ctrl |= SOLO_IIC_STOP;
|
|
|
|
solo_reg_write(solo_dev, SOLO_IIC_CTRL, ctrl);
|
|
}
|
|
|
|
static void solo_i2c_start(struct solo_dev *solo_dev)
|
|
{
|
|
u32 addr = solo_dev->i2c_msg->addr << 1;
|
|
|
|
if (solo_dev->i2c_msg->flags & I2C_M_RD)
|
|
addr |= 1;
|
|
|
|
solo_dev->i2c_state = IIC_STATE_START;
|
|
solo_reg_write(solo_dev, SOLO_IIC_TXD, addr);
|
|
solo_i2c_flush(solo_dev, 1);
|
|
}
|
|
|
|
static void solo_i2c_stop(struct solo_dev *solo_dev)
|
|
{
|
|
solo_irq_off(solo_dev, SOLO_IRQ_IIC);
|
|
solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0);
|
|
solo_dev->i2c_state = IIC_STATE_STOP;
|
|
wake_up(&solo_dev->i2c_wait);
|
|
}
|
|
|
|
static int solo_i2c_handle_read(struct solo_dev *solo_dev)
|
|
{
|
|
prepare_read:
|
|
if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) {
|
|
solo_i2c_flush(solo_dev, 0);
|
|
return 0;
|
|
}
|
|
|
|
solo_dev->i2c_msg_ptr = 0;
|
|
solo_dev->i2c_msg++;
|
|
solo_dev->i2c_msg_num--;
|
|
|
|
if (solo_dev->i2c_msg_num == 0) {
|
|
solo_i2c_stop(solo_dev);
|
|
return 0;
|
|
}
|
|
|
|
if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) {
|
|
solo_i2c_start(solo_dev);
|
|
} else {
|
|
if (solo_dev->i2c_msg->flags & I2C_M_RD)
|
|
goto prepare_read;
|
|
else
|
|
solo_i2c_stop(solo_dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int solo_i2c_handle_write(struct solo_dev *solo_dev)
|
|
{
|
|
retry_write:
|
|
if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) {
|
|
solo_reg_write(solo_dev, SOLO_IIC_TXD,
|
|
solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr]);
|
|
solo_dev->i2c_msg_ptr++;
|
|
solo_i2c_flush(solo_dev, 1);
|
|
return 0;
|
|
}
|
|
|
|
solo_dev->i2c_msg_ptr = 0;
|
|
solo_dev->i2c_msg++;
|
|
solo_dev->i2c_msg_num--;
|
|
|
|
if (solo_dev->i2c_msg_num == 0) {
|
|
solo_i2c_stop(solo_dev);
|
|
return 0;
|
|
}
|
|
|
|
if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) {
|
|
solo_i2c_start(solo_dev);
|
|
} else {
|
|
if (solo_dev->i2c_msg->flags & I2C_M_RD)
|
|
solo_i2c_stop(solo_dev);
|
|
else
|
|
goto retry_write;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int solo_i2c_isr(struct solo_dev *solo_dev)
|
|
{
|
|
u32 status = solo_reg_read(solo_dev, SOLO_IIC_CTRL);
|
|
int ret = -EINVAL;
|
|
|
|
|
|
if (CHK_FLAGS(status, SOLO_IIC_STATE_TRNS | SOLO_IIC_STATE_SIG_ERR)
|
|
|| solo_dev->i2c_id < 0) {
|
|
solo_i2c_stop(solo_dev);
|
|
return -ENXIO;
|
|
}
|
|
|
|
switch (solo_dev->i2c_state) {
|
|
case IIC_STATE_START:
|
|
if (solo_dev->i2c_msg->flags & I2C_M_RD) {
|
|
solo_dev->i2c_state = IIC_STATE_READ;
|
|
ret = solo_i2c_handle_read(solo_dev);
|
|
break;
|
|
}
|
|
|
|
solo_dev->i2c_state = IIC_STATE_WRITE;
|
|
case IIC_STATE_WRITE:
|
|
ret = solo_i2c_handle_write(solo_dev);
|
|
break;
|
|
|
|
case IIC_STATE_READ:
|
|
solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr] =
|
|
solo_reg_read(solo_dev, SOLO_IIC_RXD);
|
|
solo_dev->i2c_msg_ptr++;
|
|
|
|
ret = solo_i2c_handle_read(solo_dev);
|
|
break;
|
|
|
|
default:
|
|
solo_i2c_stop(solo_dev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int solo_i2c_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg msgs[], int num)
|
|
{
|
|
struct solo_dev *solo_dev = adap->algo_data;
|
|
unsigned long timeout;
|
|
int ret;
|
|
int i;
|
|
DEFINE_WAIT(wait);
|
|
|
|
for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
|
|
if (&solo_dev->i2c_adap[i] == adap)
|
|
break;
|
|
}
|
|
|
|
if (i == SOLO_I2C_ADAPTERS)
|
|
return num; /* XXX Right return value for failure? */
|
|
|
|
mutex_lock(&solo_dev->i2c_mutex);
|
|
solo_dev->i2c_id = i;
|
|
solo_dev->i2c_msg = msgs;
|
|
solo_dev->i2c_msg_num = num;
|
|
solo_dev->i2c_msg_ptr = 0;
|
|
|
|
solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0);
|
|
solo_irq_on(solo_dev, SOLO_IRQ_IIC);
|
|
solo_i2c_start(solo_dev);
|
|
|
|
timeout = HZ / 2;
|
|
|
|
for (;;) {
|
|
prepare_to_wait(&solo_dev->i2c_wait, &wait,
|
|
TASK_INTERRUPTIBLE);
|
|
|
|
if (solo_dev->i2c_state == IIC_STATE_STOP)
|
|
break;
|
|
|
|
timeout = schedule_timeout(timeout);
|
|
if (!timeout)
|
|
break;
|
|
|
|
if (signal_pending(current))
|
|
break;
|
|
}
|
|
|
|
finish_wait(&solo_dev->i2c_wait, &wait);
|
|
ret = num - solo_dev->i2c_msg_num;
|
|
solo_dev->i2c_state = IIC_STATE_IDLE;
|
|
solo_dev->i2c_id = -1;
|
|
|
|
mutex_unlock(&solo_dev->i2c_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 solo_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C;
|
|
}
|
|
|
|
static const struct i2c_algorithm solo_i2c_algo = {
|
|
.master_xfer = solo_i2c_master_xfer,
|
|
.functionality = solo_i2c_functionality,
|
|
};
|
|
|
|
int solo_i2c_init(struct solo_dev *solo_dev)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
solo_reg_write(solo_dev, SOLO_IIC_CFG,
|
|
SOLO_IIC_PRESCALE(8) | SOLO_IIC_ENABLE);
|
|
|
|
solo_dev->i2c_id = -1;
|
|
solo_dev->i2c_state = IIC_STATE_IDLE;
|
|
init_waitqueue_head(&solo_dev->i2c_wait);
|
|
mutex_init(&solo_dev->i2c_mutex);
|
|
|
|
for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
|
|
struct i2c_adapter *adap = &solo_dev->i2c_adap[i];
|
|
|
|
snprintf(adap->name, I2C_NAME_SIZE, "%s I2C %d",
|
|
SOLO6X10_NAME, i);
|
|
adap->algo = &solo_i2c_algo;
|
|
adap->algo_data = solo_dev;
|
|
adap->retries = 1;
|
|
adap->dev.parent = &solo_dev->pdev->dev;
|
|
|
|
ret = i2c_add_adapter(adap);
|
|
if (ret) {
|
|
adap->algo_data = NULL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret) {
|
|
for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
|
|
if (!solo_dev->i2c_adap[i].algo_data)
|
|
break;
|
|
i2c_del_adapter(&solo_dev->i2c_adap[i]);
|
|
solo_dev->i2c_adap[i].algo_data = NULL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void solo_i2c_exit(struct solo_dev *solo_dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
|
|
if (!solo_dev->i2c_adap[i].algo_data)
|
|
continue;
|
|
i2c_del_adapter(&solo_dev->i2c_adap[i]);
|
|
solo_dev->i2c_adap[i].algo_data = NULL;
|
|
}
|
|
}
|