mirror of https://gitee.com/openkylin/linux.git
91 lines
2.7 KiB
Plaintext
91 lines
2.7 KiB
Plaintext
|
|
* Samsung S2MPA01 Voltage and Current Regulator
|
|
|
|
The Samsung S2MPA01 is a multi-function device which includes high
|
|
efficiency buck converters including Dual-Phase buck converter, various LDOs,
|
|
and an RTC. It is interfaced to the host controller using an I2C interface.
|
|
Each sub-block is addressed by the host system using different I2C slave
|
|
addresses.
|
|
|
|
Required properties:
|
|
- compatible: Should be "samsung,s2mpa01-pmic".
|
|
- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
|
|
|
|
Optional properties:
|
|
- interrupt-parent: Specifies the phandle of the interrupt controller to which
|
|
the interrupts from s2mpa01 are delivered to.
|
|
- interrupts: An interrupt specifier for the sole interrupt generated by the
|
|
device.
|
|
|
|
Optional nodes:
|
|
- regulators: The regulators of s2mpa01 that have to be instantiated should be
|
|
included in a sub-node named 'regulators'. Regulator nodes and constraints
|
|
included in this sub-node use the standard regulator bindings which are
|
|
documented elsewhere.
|
|
|
|
Properties for BUCK regulator nodes:
|
|
- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
|
|
(default), 25000, or 50000. May be 0 for disabling the ramp delay on
|
|
BUCK{1,2,3,4}.
|
|
|
|
In the absence of the regulator-ramp-delay property, the default ramp
|
|
delay will be used.
|
|
|
|
NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
|
|
for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
|
|
|
|
The following BUCKs share ramp settings:
|
|
* 1 and 6
|
|
* 2 and 4
|
|
* 8, 9, and 10
|
|
|
|
The following are the names of the regulators that the s2mpa01 PMIC block
|
|
supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
|
|
as per the datasheet of s2mpa01.
|
|
|
|
- LDOn
|
|
- valid values for n are 1 to 26
|
|
- Example: LDO1, LD02, LDO26
|
|
- BUCKn
|
|
- valid values for n are 1 to 10.
|
|
- Example: BUCK1, BUCK2, BUCK9
|
|
|
|
Example:
|
|
|
|
s2mpa01_pmic@66 {
|
|
compatible = "samsung,s2mpa01-pmic";
|
|
reg = <0x66>;
|
|
|
|
regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VDD_ALIVE";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VDDQ_MMC2";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "vdd_mif";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-ramp-delay = <50000>;
|
|
};
|
|
};
|
|
};
|