mirror of https://gitee.com/openkylin/linux.git
211 lines
7.3 KiB
Plaintext
211 lines
7.3 KiB
Plaintext
Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY
|
|
-------------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible : should be one of the listed compatibles:
|
|
- "samsung,s5pv210-mipi-video-phy"
|
|
- "samsung,exynos5420-mipi-video-phy"
|
|
- "samsung,exynos5433-mipi-video-phy"
|
|
- #phy-cells : from the generic phy bindings, must be 1;
|
|
|
|
In case of s5pv210 and exynos5420 compatible PHYs:
|
|
- syscon - phandle to the PMU system controller
|
|
|
|
In case of exynos5433 compatible PHY:
|
|
- samsung,pmu-syscon - phandle to the PMU system controller
|
|
- samsung,disp-sysreg - phandle to the DISP system registers controller
|
|
- samsung,cam0-sysreg - phandle to the CAM0 system registers controller
|
|
- samsung,cam1-sysreg - phandle to the CAM1 system registers controller
|
|
|
|
For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
|
|
the PHY specifier identifies the PHY and its meaning is as follows:
|
|
0 - MIPI CSIS 0,
|
|
1 - MIPI DSIM 0,
|
|
2 - MIPI CSIS 1,
|
|
3 - MIPI DSIM 1.
|
|
"samsung,exynos5420-mipi-video-phy" and "samsung,exynos5433-mipi-video-phy"
|
|
supports additional fifth PHY:
|
|
4 - MIPI CSIS 2.
|
|
|
|
Samsung Exynos SoC series Display Port PHY
|
|
-------------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible : should be one of the following supported values:
|
|
- "samsung,exynos5250-dp-video-phy"
|
|
- "samsung,exynos5420-dp-video-phy"
|
|
- samsung,pmu-syscon: phandle for PMU system controller interface, used to
|
|
control pmu registers for power isolation.
|
|
- #phy-cells : from the generic PHY bindings, must be 0;
|
|
|
|
Samsung S5P/Exynos SoC series USB PHY
|
|
-------------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible : should be one of the listed compatibles:
|
|
- "samsung,exynos3250-usb2-phy"
|
|
- "samsung,exynos4210-usb2-phy"
|
|
- "samsung,exynos4x12-usb2-phy"
|
|
- "samsung,exynos5250-usb2-phy"
|
|
- "samsung,exynos5420-usb2-phy"
|
|
- "samsung,s5pv210-usb2-phy"
|
|
- reg : a list of registers used by phy driver
|
|
- first and obligatory is the location of phy modules registers
|
|
- samsung,sysreg-phandle - handle to syscon used to control the system registers
|
|
- samsung,pmureg-phandle - handle to syscon used to control PMU registers
|
|
- #phy-cells : from the generic phy bindings, must be 1;
|
|
- clocks and clock-names:
|
|
- the "phy" clock is required by the phy module, used as a gate
|
|
- the "ref" clock is used to get the rate of the clock provided to the
|
|
PHY module
|
|
|
|
Optional properties:
|
|
- vbus-supply: power-supply phandle for vbus power source
|
|
|
|
The first phandle argument in the PHY specifier identifies the PHY, its
|
|
meaning is compatible dependent. For the currently supported SoCs (Exynos 4210
|
|
and Exynos 4212) it is as follows:
|
|
0 - USB device ("device"),
|
|
1 - USB host ("host"),
|
|
2 - HSIC0 ("hsic0"),
|
|
3 - HSIC1 ("hsic1"),
|
|
Exynos3250 has only USB device phy available as phy 0.
|
|
|
|
Exynos 4210 and Exynos 4212 use mode switching and require that mode switch
|
|
register is supplied.
|
|
|
|
Example:
|
|
|
|
For Exynos 4412 (compatible with Exynos 4212):
|
|
|
|
usbphy: phy@125b0000 {
|
|
compatible = "samsung,exynos4x12-usb2-phy";
|
|
reg = <0x125b0000 0x100>;
|
|
clocks = <&clock 305>, <&clock 2>;
|
|
clock-names = "phy", "ref";
|
|
#phy-cells = <1>;
|
|
samsung,sysreg-phandle = <&sys_reg>;
|
|
samsung,pmureg-phandle = <&pmu_reg>;
|
|
};
|
|
|
|
Then the PHY can be used in other nodes such as:
|
|
|
|
phy-consumer@12340000 {
|
|
phys = <&usbphy 2>;
|
|
phy-names = "phy";
|
|
};
|
|
|
|
Refer to DT bindings documentation of particular PHY consumer devices for more
|
|
information about required PHYs and the way of specification.
|
|
|
|
Samsung SATA PHY Controller
|
|
---------------------------
|
|
|
|
SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
|
|
Each SATA PHY controller should have its own node.
|
|
|
|
Required properties:
|
|
- compatible : compatible list, contains "samsung,exynos5250-sata-phy"
|
|
- reg : offset and length of the SATA PHY register set;
|
|
- #phy-cells : must be zero
|
|
- clocks : must be exactly one entry
|
|
- clock-names : must be "sata_phyctrl"
|
|
- samsung,exynos-sataphy-i2c-phandle : a phandle to the I2C device, no arguments
|
|
- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments
|
|
|
|
Example:
|
|
sata_phy: sata-phy@12170000 {
|
|
compatible = "samsung,exynos5250-sata-phy";
|
|
reg = <0x12170000 0x1ff>;
|
|
clocks = <&clock 287>;
|
|
clock-names = "sata_phyctrl";
|
|
#phy-cells = <0>;
|
|
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
|
|
samsung,syscon-phandle = <&pmu_syscon>;
|
|
};
|
|
|
|
Device-Tree bindings for sataphy i2c client driver
|
|
--------------------------------------------------
|
|
|
|
Required properties:
|
|
compatible: Should be "samsung,exynos-sataphy-i2c"
|
|
- reg: I2C address of the sataphy i2c device.
|
|
|
|
Example:
|
|
|
|
sata_phy_i2c:sata-phy@38 {
|
|
compatible = "samsung,exynos-sataphy-i2c";
|
|
reg = <0x38>;
|
|
};
|
|
|
|
Samsung Exynos5 SoC series USB DRD PHY controller
|
|
--------------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible : Should be set to one of the following supported values:
|
|
- "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC,
|
|
- "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC.
|
|
- "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC.
|
|
- "samsung,exynos7-usbdrd-phy" - for exynos7 SoC.
|
|
- reg : Register offset and length of USB DRD PHY register set;
|
|
- clocks: Clock IDs array as required by the controller
|
|
- clock-names: names of clocks correseponding to IDs in the clock property;
|
|
Required clocks:
|
|
- phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock),
|
|
used for register access.
|
|
- ref: PHY's reference clock (usually crystal clock), used for
|
|
PHY operations, associated by phy name. It is used to
|
|
determine bit values for clock settings register.
|
|
For Exynos5420 this is given as 'sclk_usbphy30' in CMU.
|
|
- optional clocks: Exynos5433 & Exynos7 SoC has now following additional
|
|
gate clocks available:
|
|
- phy_pipe: for PIPE3 phy
|
|
- phy_utmi: for UTMI+ phy
|
|
- itp: for ITP generation
|
|
- samsung,pmu-syscon: phandle for PMU system controller interface, used to
|
|
control pmu registers for power isolation.
|
|
- #phy-cells : from the generic PHY bindings, must be 1;
|
|
|
|
For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy"
|
|
compatible PHYs, the second cell in the PHY specifier identifies the
|
|
PHY id, which is interpreted as follows:
|
|
0 - UTMI+ type phy,
|
|
1 - PIPE3 type phy,
|
|
|
|
Example:
|
|
usbdrd_phy: usbphy@12100000 {
|
|
compatible = "samsung,exynos5250-usbdrd-phy";
|
|
reg = <0x12100000 0x100>;
|
|
clocks = <&clock 286>, <&clock 1>;
|
|
clock-names = "phy", "ref";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
- aliases: For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
|
|
'usbdrd_phy' nodes should have numbered alias in the aliases node,
|
|
in the form of usbdrdphyN, N = 0, 1... (depending on number of
|
|
controllers).
|
|
Example:
|
|
aliases {
|
|
usbdrdphy0 = &usb3_phy0;
|
|
usbdrdphy1 = &usb3_phy1;
|
|
};
|
|
|
|
Samsung Exynos SoC series PCIe PHY controller
|
|
--------------------------------------------------
|
|
Required properties:
|
|
- compatible : Should be set to "samsung,exynos5440-pcie-phy"
|
|
- #phy-cells : Must be zero
|
|
- reg : a register used by phy driver.
|
|
- First is for phy register, second is for block register.
|
|
- reg-names : Must be set to "phy" and "block".
|
|
|
|
Example:
|
|
pcie_phy0: pcie-phy@270000 {
|
|
#phy-cells = <0>;
|
|
compatible = "samsung,exynos5440-pcie-phy";
|
|
reg = <0x270000 0x1000>, <0x271000 0x40>;
|
|
reg-names = "phy", "block";
|
|
};
|