mirror of https://gitee.com/openkylin/linux.git
57 lines
1.9 KiB
Plaintext
57 lines
1.9 KiB
Plaintext
Xilinx SuperSpeed DWC3 USB SoC controller
|
|
|
|
Required properties:
|
|
- compatible: May contain "xlnx,zynqmp-dwc3" or "xlnx,versal-dwc3"
|
|
- reg: Base address and length of the register control block
|
|
- clocks: A list of phandles for the clocks listed in clock-names
|
|
- clock-names: Should contain the following:
|
|
"bus_clk" Master/Core clock, have to be >= 125 MHz for SS
|
|
operation and >= 60MHz for HS operation
|
|
|
|
"ref_clk" Clock source to core during PHY power down
|
|
- resets: A list of phandles for resets listed in reset-names
|
|
- reset-names:
|
|
"usb_crst" USB core reset
|
|
"usb_hibrst" USB hibernation reset
|
|
"usb_apbrst" USB APB reset
|
|
|
|
Required child node:
|
|
A child node must exist to represent the core DWC3 IP block. The name of
|
|
the node is not important. The content of the node is defined in dwc3.txt.
|
|
|
|
Optional properties for snps,dwc3:
|
|
- dma-coherent: Enable this flag if CCI is enabled in design. Adding this
|
|
flag configures Global SoC bus Configuration Register and
|
|
Xilinx USB 3.0 IP - USB coherency register to enable CCI.
|
|
- interrupt-names: Should contain the following:
|
|
"dwc_usb3" USB gadget mode interrupts
|
|
"otg" USB OTG mode interrupts
|
|
"hiber" USB hibernation interrupts
|
|
|
|
Example device node:
|
|
|
|
usb@0 {
|
|
#address-cells = <0x2>;
|
|
#size-cells = <0x1>;
|
|
compatible = "xlnx,zynqmp-dwc3";
|
|
reg = <0x0 0xff9d0000 0x0 0x100>;
|
|
clock-names = "bus_clk", "ref_clk";
|
|
clocks = <&clk125>, <&clk125>;
|
|
resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
|
|
<&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
|
|
<&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
|
|
reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
|
|
ranges;
|
|
|
|
dwc3@fe200000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0 0xfe200000 0x40000>;
|
|
interrupt-names = "dwc_usb3", "otg", "hiber";
|
|
interrupts = <0 65 4>, <0 69 4>, <0 75 4>;
|
|
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
|
|
phy-names = "usb3-phy";
|
|
dr_mode = "host";
|
|
dma-coherent;
|
|
};
|
|
};
|