mirror of https://gitee.com/openkylin/linux.git
96 lines
2.4 KiB
YAML
96 lines
2.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: "http://devicetree.org/schemas/usb/mediatek,mt6360-tcpc.yaml#"
|
|
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|
|
|
title: Mediatek MT6360 Type-C Port Switch and Power Delivery controller DT bindings
|
|
|
|
maintainers:
|
|
- ChiYuan Huang <cy_huang@richtek.com>
|
|
|
|
description: |
|
|
Mediatek MT6360 is a multi-functional device. It integrates charger, ADC, flash, RGB indicators,
|
|
regulators (BUCKs/LDOs), and TypeC Port Switch with Power Delivery controller.
|
|
This document only describes MT6360 Type-C Port Switch and Power Delivery controller.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- mediatek,mt6360-tcpc
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: PD_IRQB
|
|
|
|
connector:
|
|
type: object
|
|
$ref: ../connector/usb-connector.yaml#
|
|
description:
|
|
Properties for usb c connector.
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- interrupts
|
|
- interrupt-names
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
i2c0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mt6360@34 {
|
|
compatible = "mediatek,mt6360";
|
|
reg = <0x34>;
|
|
tcpc {
|
|
compatible = "mediatek,mt6360-tcpc";
|
|
interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-names = "PD_IRQB";
|
|
|
|
connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
|
|
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
|
|
op-sink-microwatt = <10000000>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
endpoint {
|
|
remote-endpoint = <&usb_hs>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
endpoint {
|
|
remote-endpoint = <&usb_ss>;
|
|
};
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
endpoint {
|
|
remote-endpoint = <&dp_aux>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|