mirror of https://gitee.com/openkylin/linux.git
687 lines
16 KiB
C
687 lines
16 KiB
C
/*
|
|
* lm75.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include "lm75.h"
|
|
|
|
|
|
/*
|
|
* This driver handles the LM75 and compatible digital temperature sensors.
|
|
*/
|
|
|
|
enum lm75_type { /* keep sorted in alphabetical order */
|
|
adt75,
|
|
ds1775,
|
|
ds75,
|
|
ds7505,
|
|
g751,
|
|
lm75,
|
|
lm75a,
|
|
lm75b,
|
|
max6625,
|
|
max6626,
|
|
max31725,
|
|
mcp980x,
|
|
stds75,
|
|
tcn75,
|
|
tmp100,
|
|
tmp101,
|
|
tmp105,
|
|
tmp112,
|
|
tmp175,
|
|
tmp275,
|
|
tmp75,
|
|
tmp75c,
|
|
};
|
|
|
|
/* Addresses scanned */
|
|
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
|
|
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
|
|
|
/* The LM75 registers */
|
|
#define LM75_REG_TEMP 0x00
|
|
#define LM75_REG_CONF 0x01
|
|
#define LM75_REG_HYST 0x02
|
|
#define LM75_REG_MAX 0x03
|
|
|
|
/* Each client has this additional data */
|
|
struct lm75_data {
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
u8 orig_conf;
|
|
u8 resolution; /* In bits, between 9 and 16 */
|
|
u8 resolution_limits;
|
|
unsigned int sample_time; /* In ms */
|
|
};
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
|
|
{
|
|
return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
|
|
}
|
|
|
|
static int lm75_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
struct lm75_data *data = dev_get_drvdata(dev);
|
|
unsigned int regval;
|
|
int err, reg;
|
|
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
*val = data->sample_time;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
reg = LM75_REG_TEMP;
|
|
break;
|
|
case hwmon_temp_max:
|
|
reg = LM75_REG_MAX;
|
|
break;
|
|
case hwmon_temp_max_hyst:
|
|
reg = LM75_REG_HYST;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
err = regmap_read(data->regmap, reg, ®val);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
*val = lm75_reg_to_mc(regval, data->resolution);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long temp)
|
|
{
|
|
struct lm75_data *data = dev_get_drvdata(dev);
|
|
u8 resolution;
|
|
int reg;
|
|
|
|
if (type != hwmon_temp)
|
|
return -EINVAL;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_max:
|
|
reg = LM75_REG_MAX;
|
|
break;
|
|
case hwmon_temp_max_hyst:
|
|
reg = LM75_REG_HYST;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Resolution of limit registers is assumed to be the same as the
|
|
* temperature input register resolution unless given explicitly.
|
|
*/
|
|
if (data->resolution_limits)
|
|
resolution = data->resolution_limits;
|
|
else
|
|
resolution = data->resolution;
|
|
|
|
temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
|
|
temp = DIV_ROUND_CLOSEST(temp << (resolution - 8),
|
|
1000) << (16 - resolution);
|
|
|
|
return regmap_write(data->regmap, reg, temp);
|
|
}
|
|
|
|
static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
switch (attr) {
|
|
case hwmon_chip_update_interval:
|
|
return S_IRUGO;
|
|
}
|
|
break;
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
return S_IRUGO;
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_max_hyst:
|
|
return S_IRUGO | S_IWUSR;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
/* device probe and removal */
|
|
|
|
/* chip configuration */
|
|
|
|
static const u32 lm75_chip_config[] = {
|
|
HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL,
|
|
0
|
|
};
|
|
|
|
static const struct hwmon_channel_info lm75_chip = {
|
|
.type = hwmon_chip,
|
|
.config = lm75_chip_config,
|
|
};
|
|
|
|
static const u32 lm75_temp_config[] = {
|
|
HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST,
|
|
0
|
|
};
|
|
|
|
static const struct hwmon_channel_info lm75_temp = {
|
|
.type = hwmon_temp,
|
|
.config = lm75_temp_config,
|
|
};
|
|
|
|
static const struct hwmon_channel_info *lm75_info[] = {
|
|
&lm75_chip,
|
|
&lm75_temp,
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops lm75_hwmon_ops = {
|
|
.is_visible = lm75_is_visible,
|
|
.read = lm75_read,
|
|
.write = lm75_write,
|
|
};
|
|
|
|
static const struct hwmon_chip_info lm75_chip_info = {
|
|
.ops = &lm75_hwmon_ops,
|
|
.info = lm75_info,
|
|
};
|
|
|
|
static bool lm75_is_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return reg != LM75_REG_TEMP;
|
|
}
|
|
|
|
static bool lm75_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return reg == LM75_REG_TEMP;
|
|
}
|
|
|
|
static const struct regmap_config lm75_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.max_register = LM75_REG_MAX,
|
|
.writeable_reg = lm75_is_writeable_reg,
|
|
.volatile_reg = lm75_is_volatile_reg,
|
|
.val_format_endian = REGMAP_ENDIAN_BIG,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
};
|
|
|
|
static void lm75_remove(void *data)
|
|
{
|
|
struct lm75_data *lm75 = data;
|
|
struct i2c_client *client = lm75->client;
|
|
|
|
i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
|
|
}
|
|
|
|
static int
|
|
lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct lm75_data *data;
|
|
int status, err;
|
|
u8 set_mask, clr_mask;
|
|
int new;
|
|
enum lm75_type kind;
|
|
|
|
if (client->dev.of_node)
|
|
kind = (enum lm75_type)of_device_get_match_data(&client->dev);
|
|
else
|
|
kind = id->driver_data;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -EIO;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config);
|
|
if (IS_ERR(data->regmap))
|
|
return PTR_ERR(data->regmap);
|
|
|
|
/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
|
|
* Then tweak to be more precise when appropriate.
|
|
*/
|
|
set_mask = 0;
|
|
clr_mask = LM75_SHUTDOWN; /* continuous conversions */
|
|
|
|
switch (kind) {
|
|
case adt75:
|
|
clr_mask |= 1 << 5; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 8;
|
|
break;
|
|
case ds1775:
|
|
case ds75:
|
|
case stds75:
|
|
clr_mask |= 3 << 5;
|
|
set_mask |= 2 << 5; /* 11-bit mode */
|
|
data->resolution = 11;
|
|
data->sample_time = MSEC_PER_SEC;
|
|
break;
|
|
case ds7505:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case g751:
|
|
case lm75:
|
|
case lm75a:
|
|
data->resolution = 9;
|
|
data->sample_time = MSEC_PER_SEC / 2;
|
|
break;
|
|
case lm75b:
|
|
data->resolution = 11;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case max6625:
|
|
data->resolution = 9;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case max6626:
|
|
data->resolution = 12;
|
|
data->resolution_limits = 9;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case max31725:
|
|
data->resolution = 16;
|
|
data->sample_time = MSEC_PER_SEC / 8;
|
|
break;
|
|
case tcn75:
|
|
data->resolution = 9;
|
|
data->sample_time = MSEC_PER_SEC / 8;
|
|
break;
|
|
case mcp980x:
|
|
data->resolution_limits = 9;
|
|
/* fall through */
|
|
case tmp100:
|
|
case tmp101:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC;
|
|
clr_mask |= 1 << 7; /* not one-shot mode */
|
|
break;
|
|
case tmp112:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
clr_mask |= 1 << 7; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
case tmp105:
|
|
case tmp175:
|
|
case tmp275:
|
|
case tmp75:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
clr_mask |= 1 << 7; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 2;
|
|
break;
|
|
case tmp75c:
|
|
clr_mask |= 1 << 5; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = MSEC_PER_SEC / 4;
|
|
break;
|
|
}
|
|
|
|
/* configure as specified */
|
|
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
|
|
if (status < 0) {
|
|
dev_dbg(dev, "Can't read config? %d\n", status);
|
|
return status;
|
|
}
|
|
data->orig_conf = status;
|
|
new = status & ~clr_mask;
|
|
new |= set_mask;
|
|
if (status != new)
|
|
i2c_smbus_write_byte_data(client, LM75_REG_CONF, new);
|
|
|
|
err = devm_add_action_or_reset(dev, lm75_remove, data);
|
|
if (err)
|
|
return err;
|
|
|
|
dev_dbg(dev, "Config %02x\n", new);
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
|
|
data, &lm75_chip_info,
|
|
NULL);
|
|
if (IS_ERR(hwmon_dev))
|
|
return PTR_ERR(hwmon_dev);
|
|
|
|
dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lm75_ids[] = {
|
|
{ "adt75", adt75, },
|
|
{ "ds1775", ds1775, },
|
|
{ "ds75", ds75, },
|
|
{ "ds7505", ds7505, },
|
|
{ "g751", g751, },
|
|
{ "lm75", lm75, },
|
|
{ "lm75a", lm75a, },
|
|
{ "lm75b", lm75b, },
|
|
{ "max6625", max6625, },
|
|
{ "max6626", max6626, },
|
|
{ "max31725", max31725, },
|
|
{ "max31726", max31725, },
|
|
{ "mcp980x", mcp980x, },
|
|
{ "stds75", stds75, },
|
|
{ "tcn75", tcn75, },
|
|
{ "tmp100", tmp100, },
|
|
{ "tmp101", tmp101, },
|
|
{ "tmp105", tmp105, },
|
|
{ "tmp112", tmp112, },
|
|
{ "tmp175", tmp175, },
|
|
{ "tmp275", tmp275, },
|
|
{ "tmp75", tmp75, },
|
|
{ "tmp75c", tmp75c, },
|
|
{ /* LIST END */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lm75_ids);
|
|
|
|
static const struct of_device_id lm75_of_match[] = {
|
|
{
|
|
.compatible = "adi,adt75",
|
|
.data = (void *)adt75
|
|
},
|
|
{
|
|
.compatible = "dallas,ds1775",
|
|
.data = (void *)ds1775
|
|
},
|
|
{
|
|
.compatible = "dallas,ds75",
|
|
.data = (void *)ds75
|
|
},
|
|
{
|
|
.compatible = "dallas,ds7505",
|
|
.data = (void *)ds7505
|
|
},
|
|
{
|
|
.compatible = "gmt,g751",
|
|
.data = (void *)g751
|
|
},
|
|
{
|
|
.compatible = "national,lm75",
|
|
.data = (void *)lm75
|
|
},
|
|
{
|
|
.compatible = "national,lm75a",
|
|
.data = (void *)lm75a
|
|
},
|
|
{
|
|
.compatible = "national,lm75b",
|
|
.data = (void *)lm75b
|
|
},
|
|
{
|
|
.compatible = "maxim,max6625",
|
|
.data = (void *)max6625
|
|
},
|
|
{
|
|
.compatible = "maxim,max6626",
|
|
.data = (void *)max6626
|
|
},
|
|
{
|
|
.compatible = "maxim,max31725",
|
|
.data = (void *)max31725
|
|
},
|
|
{
|
|
.compatible = "maxim,max31726",
|
|
.data = (void *)max31725
|
|
},
|
|
{
|
|
.compatible = "maxim,mcp980x",
|
|
.data = (void *)mcp980x
|
|
},
|
|
{
|
|
.compatible = "st,stds75",
|
|
.data = (void *)stds75
|
|
},
|
|
{
|
|
.compatible = "microchip,tcn75",
|
|
.data = (void *)tcn75
|
|
},
|
|
{
|
|
.compatible = "ti,tmp100",
|
|
.data = (void *)tmp100
|
|
},
|
|
{
|
|
.compatible = "ti,tmp101",
|
|
.data = (void *)tmp101
|
|
},
|
|
{
|
|
.compatible = "ti,tmp105",
|
|
.data = (void *)tmp105
|
|
},
|
|
{
|
|
.compatible = "ti,tmp112",
|
|
.data = (void *)tmp112
|
|
},
|
|
{
|
|
.compatible = "ti,tmp175",
|
|
.data = (void *)tmp175
|
|
},
|
|
{
|
|
.compatible = "ti,tmp275",
|
|
.data = (void *)tmp275
|
|
},
|
|
{
|
|
.compatible = "ti,tmp75",
|
|
.data = (void *)tmp75
|
|
},
|
|
{
|
|
.compatible = "ti,tmp75c",
|
|
.data = (void *)tmp75c
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lm75_of_match);
|
|
|
|
#define LM75A_ID 0xA1
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int lm75_detect(struct i2c_client *new_client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = new_client->adapter;
|
|
int i;
|
|
int conf, hyst, os;
|
|
bool is_lm75a = 0;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Now, we do the remaining detection. There is no identification-
|
|
* dedicated register so we have to rely on several tricks:
|
|
* unused bits, registers cycling over 8-address boundaries,
|
|
* addresses 0x04-0x07 returning the last read value.
|
|
* The cycling+unused addresses combination is not tested,
|
|
* since it would significantly slow the detection down and would
|
|
* hardly add any value.
|
|
*
|
|
* The National Semiconductor LM75A is different than earlier
|
|
* LM75s. It has an ID byte of 0xaX (where X is the chip
|
|
* revision, with 1 being the only revision in existence) in
|
|
* register 7, and unused registers return 0xff rather than the
|
|
* last read value.
|
|
*
|
|
* Note that this function only detects the original National
|
|
* Semiconductor LM75 and the LM75A. Clones from other vendors
|
|
* aren't detected, on purpose, because they are typically never
|
|
* found on PC hardware. They are found on embedded designs where
|
|
* they can be instantiated explicitly so detection is not needed.
|
|
* The absence of identification registers on all these clones
|
|
* would make their exhaustive detection very difficult and weak,
|
|
* and odds are that the driver would bind to unsupported devices.
|
|
*/
|
|
|
|
/* Unused bits */
|
|
conf = i2c_smbus_read_byte_data(new_client, 1);
|
|
if (conf & 0xe0)
|
|
return -ENODEV;
|
|
|
|
/* First check for LM75A */
|
|
if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
|
|
/* LM75A returns 0xff on unused registers so
|
|
just to be sure we check for that too. */
|
|
if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
|
|
|| i2c_smbus_read_byte_data(new_client, 5) != 0xff
|
|
|| i2c_smbus_read_byte_data(new_client, 6) != 0xff)
|
|
return -ENODEV;
|
|
is_lm75a = 1;
|
|
hyst = i2c_smbus_read_byte_data(new_client, 2);
|
|
os = i2c_smbus_read_byte_data(new_client, 3);
|
|
} else { /* Traditional style LM75 detection */
|
|
/* Unused addresses */
|
|
hyst = i2c_smbus_read_byte_data(new_client, 2);
|
|
if (i2c_smbus_read_byte_data(new_client, 4) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, 5) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, 6) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, 7) != hyst)
|
|
return -ENODEV;
|
|
os = i2c_smbus_read_byte_data(new_client, 3);
|
|
if (i2c_smbus_read_byte_data(new_client, 4) != os
|
|
|| i2c_smbus_read_byte_data(new_client, 5) != os
|
|
|| i2c_smbus_read_byte_data(new_client, 6) != os
|
|
|| i2c_smbus_read_byte_data(new_client, 7) != os)
|
|
return -ENODEV;
|
|
}
|
|
/*
|
|
* It is very unlikely that this is a LM75 if both
|
|
* hysteresis and temperature limit registers are 0.
|
|
*/
|
|
if (hyst == 0 && os == 0)
|
|
return -ENODEV;
|
|
|
|
/* Addresses cycling */
|
|
for (i = 8; i <= 248; i += 40) {
|
|
if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
|
|
|| i2c_smbus_read_byte_data(new_client, i + 2) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, i + 3) != os)
|
|
return -ENODEV;
|
|
if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7)
|
|
!= LM75A_ID)
|
|
return -ENODEV;
|
|
}
|
|
|
|
strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int lm75_suspend(struct device *dev)
|
|
{
|
|
int status;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
|
|
if (status < 0) {
|
|
dev_dbg(&client->dev, "Can't read config? %d\n", status);
|
|
return status;
|
|
}
|
|
status = status | LM75_SHUTDOWN;
|
|
i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
|
|
return 0;
|
|
}
|
|
|
|
static int lm75_resume(struct device *dev)
|
|
{
|
|
int status;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
|
|
if (status < 0) {
|
|
dev_dbg(&client->dev, "Can't read config? %d\n", status);
|
|
return status;
|
|
}
|
|
status = status & ~LM75_SHUTDOWN;
|
|
i2c_smbus_write_byte_data(client, LM75_REG_CONF, status);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops lm75_dev_pm_ops = {
|
|
.suspend = lm75_suspend,
|
|
.resume = lm75_resume,
|
|
};
|
|
#define LM75_DEV_PM_OPS (&lm75_dev_pm_ops)
|
|
#else
|
|
#define LM75_DEV_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct i2c_driver lm75_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "lm75",
|
|
.of_match_table = of_match_ptr(lm75_of_match),
|
|
.pm = LM75_DEV_PM_OPS,
|
|
},
|
|
.probe = lm75_probe,
|
|
.id_table = lm75_ids,
|
|
.detect = lm75_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(lm75_driver);
|
|
|
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
|
|
MODULE_DESCRIPTION("LM75 driver");
|
|
MODULE_LICENSE("GPL");
|