mirror of https://gitee.com/openkylin/linux.git
798 lines
21 KiB
C
798 lines
21 KiB
C
/*
|
|
* Freescale MPC85xx/MPC86xx RapidIO support
|
|
*
|
|
* Copyright 2009 Sysgo AG
|
|
* Thomas Moll <thomas.moll@sysgo.com>
|
|
* - fixed maintenance access routines, check for aligned access
|
|
*
|
|
* Copyright 2009 Integrated Device Technology, Inc.
|
|
* Alex Bounine <alexandre.bounine@idt.com>
|
|
* - Added Port-Write message handling
|
|
* - Added Machine Check exception handling
|
|
*
|
|
* Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
|
|
* Zhang Wei <wei.zhang@freescale.com>
|
|
*
|
|
* Copyright 2005 MontaVista Software, Inc.
|
|
* Matt Porter <mporter@kernel.crashing.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/uaccess.h>
|
|
#include <asm/machdep.h>
|
|
|
|
#include "fsl_rio.h"
|
|
|
|
#undef DEBUG_PW /* Port-Write debugging */
|
|
|
|
#define RIO_PORT1_EDCSR 0x0640
|
|
#define RIO_PORT2_EDCSR 0x0680
|
|
#define RIO_PORT1_IECSR 0x10130
|
|
#define RIO_PORT2_IECSR 0x101B0
|
|
|
|
#define RIO_GCCSR 0x13c
|
|
#define RIO_ESCSR 0x158
|
|
#define ESCSR_CLEAR 0x07120204
|
|
#define RIO_PORT2_ESCSR 0x178
|
|
#define RIO_CCSR 0x15c
|
|
#define RIO_LTLEDCSR_IER 0x80000000
|
|
#define RIO_LTLEDCSR_PRT 0x01000000
|
|
#define IECSR_CLEAR 0x80000000
|
|
#define RIO_ISR_AACR 0x10120
|
|
#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
|
|
|
|
#define RIWTAR_TRAD_VAL_SHIFT 12
|
|
#define RIWTAR_TRAD_MASK 0x00FFFFFF
|
|
#define RIWBAR_BADD_VAL_SHIFT 12
|
|
#define RIWBAR_BADD_MASK 0x003FFFFF
|
|
#define RIWAR_ENABLE 0x80000000
|
|
#define RIWAR_TGINT_LOCAL 0x00F00000
|
|
#define RIWAR_RDTYP_NO_SNOOP 0x00040000
|
|
#define RIWAR_RDTYP_SNOOP 0x00050000
|
|
#define RIWAR_WRTYP_NO_SNOOP 0x00004000
|
|
#define RIWAR_WRTYP_SNOOP 0x00005000
|
|
#define RIWAR_WRTYP_ALLOC 0x00006000
|
|
#define RIWAR_SIZE_MASK 0x0000003F
|
|
|
|
#define __fsl_read_rio_config(x, addr, err, op) \
|
|
__asm__ __volatile__( \
|
|
"1: "op" %1,0(%2)\n" \
|
|
" eieio\n" \
|
|
"2:\n" \
|
|
".section .fixup,\"ax\"\n" \
|
|
"3: li %1,-1\n" \
|
|
" li %0,%3\n" \
|
|
" b 2b\n" \
|
|
".section __ex_table,\"a\"\n" \
|
|
PPC_LONG_ALIGN "\n" \
|
|
PPC_LONG "1b,3b\n" \
|
|
".text" \
|
|
: "=r" (err), "=r" (x) \
|
|
: "b" (addr), "i" (-EFAULT), "0" (err))
|
|
|
|
void __iomem *rio_regs_win;
|
|
void __iomem *rmu_regs_win;
|
|
resource_size_t rio_law_start;
|
|
|
|
struct fsl_rio_dbell *dbell;
|
|
struct fsl_rio_pw *pw;
|
|
|
|
#ifdef CONFIG_E500
|
|
int fsl_rio_mcheck_exception(struct pt_regs *regs)
|
|
{
|
|
const struct exception_table_entry *entry;
|
|
unsigned long reason;
|
|
|
|
if (!rio_regs_win)
|
|
return 0;
|
|
|
|
reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
|
|
if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
|
|
/* Check if we are prepared to handle this fault */
|
|
entry = search_exception_tables(regs->nip);
|
|
if (entry) {
|
|
pr_debug("RIO: %s - MC Exception handled\n",
|
|
__func__);
|
|
out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
|
|
0);
|
|
regs->msr |= MSR_RI;
|
|
regs->nip = entry->fixup;
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
|
|
#endif
|
|
|
|
/**
|
|
* fsl_local_config_read - Generate a MPC85xx local config space read
|
|
* @mport: RapidIO master port info
|
|
* @index: ID of RapdiIO interface
|
|
* @offset: Offset into configuration space
|
|
* @len: Length (in bytes) of the maintenance transaction
|
|
* @data: Value to be read into
|
|
*
|
|
* Generates a MPC85xx local configuration space read. Returns %0 on
|
|
* success or %-EINVAL on failure.
|
|
*/
|
|
static int fsl_local_config_read(struct rio_mport *mport,
|
|
int index, u32 offset, int len, u32 *data)
|
|
{
|
|
struct rio_priv *priv = mport->priv;
|
|
pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
|
|
offset);
|
|
*data = in_be32(priv->regs_win + offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fsl_local_config_write - Generate a MPC85xx local config space write
|
|
* @mport: RapidIO master port info
|
|
* @index: ID of RapdiIO interface
|
|
* @offset: Offset into configuration space
|
|
* @len: Length (in bytes) of the maintenance transaction
|
|
* @data: Value to be written
|
|
*
|
|
* Generates a MPC85xx local configuration space write. Returns %0 on
|
|
* success or %-EINVAL on failure.
|
|
*/
|
|
static int fsl_local_config_write(struct rio_mport *mport,
|
|
int index, u32 offset, int len, u32 data)
|
|
{
|
|
struct rio_priv *priv = mport->priv;
|
|
pr_debug
|
|
("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
|
|
index, offset, data);
|
|
out_be32(priv->regs_win + offset, data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
|
|
* @mport: RapidIO master port info
|
|
* @index: ID of RapdiIO interface
|
|
* @destid: Destination ID of transaction
|
|
* @hopcount: Number of hops to target device
|
|
* @offset: Offset into configuration space
|
|
* @len: Length (in bytes) of the maintenance transaction
|
|
* @val: Location to be read into
|
|
*
|
|
* Generates a MPC85xx read maintenance transaction. Returns %0 on
|
|
* success or %-EINVAL on failure.
|
|
*/
|
|
static int
|
|
fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
|
|
u8 hopcount, u32 offset, int len, u32 *val)
|
|
{
|
|
struct rio_priv *priv = mport->priv;
|
|
u8 *data;
|
|
u32 rval, err = 0;
|
|
|
|
pr_debug
|
|
("fsl_rio_config_read:"
|
|
" index %d destid %d hopcount %d offset %8.8x len %d\n",
|
|
index, destid, hopcount, offset, len);
|
|
|
|
/* 16MB maintenance window possible */
|
|
/* allow only aligned access to maintenance registers */
|
|
if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
|
|
return -EINVAL;
|
|
|
|
out_be32(&priv->maint_atmu_regs->rowtar,
|
|
(destid << 22) | (hopcount << 12) | (offset >> 12));
|
|
out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
|
|
|
|
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
|
|
switch (len) {
|
|
case 1:
|
|
__fsl_read_rio_config(rval, data, err, "lbz");
|
|
break;
|
|
case 2:
|
|
__fsl_read_rio_config(rval, data, err, "lhz");
|
|
break;
|
|
case 4:
|
|
__fsl_read_rio_config(rval, data, err, "lwz");
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (err) {
|
|
pr_debug("RIO: cfg_read error %d for %x:%x:%x\n",
|
|
err, destid, hopcount, offset);
|
|
}
|
|
|
|
*val = rval;
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
|
|
* @mport: RapidIO master port info
|
|
* @index: ID of RapdiIO interface
|
|
* @destid: Destination ID of transaction
|
|
* @hopcount: Number of hops to target device
|
|
* @offset: Offset into configuration space
|
|
* @len: Length (in bytes) of the maintenance transaction
|
|
* @val: Value to be written
|
|
*
|
|
* Generates an MPC85xx write maintenance transaction. Returns %0 on
|
|
* success or %-EINVAL on failure.
|
|
*/
|
|
static int
|
|
fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
|
|
u8 hopcount, u32 offset, int len, u32 val)
|
|
{
|
|
struct rio_priv *priv = mport->priv;
|
|
u8 *data;
|
|
pr_debug
|
|
("fsl_rio_config_write:"
|
|
" index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
|
|
index, destid, hopcount, offset, len, val);
|
|
|
|
/* 16MB maintenance windows possible */
|
|
/* allow only aligned access to maintenance registers */
|
|
if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len))
|
|
return -EINVAL;
|
|
|
|
out_be32(&priv->maint_atmu_regs->rowtar,
|
|
(destid << 22) | (hopcount << 12) | (offset >> 12));
|
|
out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
|
|
|
|
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
|
|
switch (len) {
|
|
case 1:
|
|
out_8((u8 *) data, val);
|
|
break;
|
|
case 2:
|
|
out_be16((u16 *) data, val);
|
|
break;
|
|
case 4:
|
|
out_be32((u32 *) data, val);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_rio_inbound_mem_init(struct rio_priv *priv)
|
|
{
|
|
int i;
|
|
|
|
/* close inbound windows */
|
|
for (i = 0; i < RIO_INB_ATMU_COUNT; i++)
|
|
out_be32(&priv->inb_atmu_regs[i].riwar, 0);
|
|
}
|
|
|
|
int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
|
|
u64 rstart, u32 size, u32 flags)
|
|
{
|
|
struct rio_priv *priv = mport->priv;
|
|
u32 base_size;
|
|
unsigned int base_size_log;
|
|
u64 win_start, win_end;
|
|
u32 riwar;
|
|
int i;
|
|
|
|
if ((size & (size - 1)) != 0)
|
|
return -EINVAL;
|
|
|
|
base_size_log = ilog2(size);
|
|
base_size = 1 << base_size_log;
|
|
|
|
/* check if addresses are aligned with the window size */
|
|
if (lstart & (base_size - 1))
|
|
return -EINVAL;
|
|
if (rstart & (base_size - 1))
|
|
return -EINVAL;
|
|
|
|
/* check for conflicting ranges */
|
|
for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
|
|
riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
|
|
if ((riwar & RIWAR_ENABLE) == 0)
|
|
continue;
|
|
win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK))
|
|
<< RIWBAR_BADD_VAL_SHIFT;
|
|
win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1);
|
|
if (rstart < win_end && (rstart + size) > win_start)
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* find unused atmu */
|
|
for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
|
|
riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
|
|
if ((riwar & RIWAR_ENABLE) == 0)
|
|
break;
|
|
}
|
|
if (i >= RIO_INB_ATMU_COUNT)
|
|
return -ENOMEM;
|
|
|
|
out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT);
|
|
out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT);
|
|
out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL |
|
|
RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1));
|
|
|
|
return 0;
|
|
}
|
|
|
|
void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart)
|
|
{
|
|
u32 win_start_shift, base_start_shift;
|
|
struct rio_priv *priv = mport->priv;
|
|
u32 riwar, riwtar;
|
|
int i;
|
|
|
|
/* skip default window */
|
|
base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT;
|
|
for (i = 0; i < RIO_INB_ATMU_COUNT; i++) {
|
|
riwar = in_be32(&priv->inb_atmu_regs[i].riwar);
|
|
if ((riwar & RIWAR_ENABLE) == 0)
|
|
continue;
|
|
|
|
riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar);
|
|
win_start_shift = riwtar & RIWTAR_TRAD_MASK;
|
|
if (win_start_shift == base_start_shift) {
|
|
out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
void fsl_rio_port_error_handler(int offset)
|
|
{
|
|
/*XXX: Error recovery is not implemented, we just clear errors */
|
|
out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
|
|
|
|
if (offset == 0) {
|
|
out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
|
|
out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
|
|
out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
|
|
} else {
|
|
out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
|
|
out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
|
|
out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
|
|
}
|
|
}
|
|
static inline void fsl_rio_info(struct device *dev, u32 ccsr)
|
|
{
|
|
const char *str;
|
|
if (ccsr & 1) {
|
|
/* Serial phy */
|
|
switch (ccsr >> 30) {
|
|
case 0:
|
|
str = "1";
|
|
break;
|
|
case 1:
|
|
str = "4";
|
|
break;
|
|
default:
|
|
str = "Unknown";
|
|
break;
|
|
}
|
|
dev_info(dev, "Hardware port width: %s\n", str);
|
|
|
|
switch ((ccsr >> 27) & 7) {
|
|
case 0:
|
|
str = "Single-lane 0";
|
|
break;
|
|
case 1:
|
|
str = "Single-lane 2";
|
|
break;
|
|
case 2:
|
|
str = "Four-lane";
|
|
break;
|
|
default:
|
|
str = "Unknown";
|
|
break;
|
|
}
|
|
dev_info(dev, "Training connection status: %s\n", str);
|
|
} else {
|
|
/* Parallel phy */
|
|
if (!(ccsr & 0x80000000))
|
|
dev_info(dev, "Output port operating in 8-bit mode\n");
|
|
if (!(ccsr & 0x08000000))
|
|
dev_info(dev, "Input port operating in 8-bit mode\n");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
|
|
* @dev: platform_device pointer
|
|
*
|
|
* Initializes MPC85xx RapidIO hardware interface, configures
|
|
* master port with system-specific info, and registers the
|
|
* master port with the RapidIO subsystem.
|
|
*/
|
|
int fsl_rio_setup(struct platform_device *dev)
|
|
{
|
|
struct rio_ops *ops;
|
|
struct rio_mport *port;
|
|
struct rio_priv *priv;
|
|
int rc = 0;
|
|
const u32 *dt_range, *cell, *port_index;
|
|
u32 active_ports = 0;
|
|
struct resource regs, rmu_regs;
|
|
struct device_node *np, *rmu_node;
|
|
int rlen;
|
|
u32 ccsr;
|
|
u64 range_start, range_size;
|
|
int paw, aw, sw;
|
|
u32 i;
|
|
static int tmp;
|
|
struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL};
|
|
|
|
if (!dev->dev.of_node) {
|
|
dev_err(&dev->dev, "Device OF-Node is NULL");
|
|
return -ENODEV;
|
|
}
|
|
|
|
rc = of_address_to_resource(dev->dev.of_node, 0, ®s);
|
|
if (rc) {
|
|
dev_err(&dev->dev, "Can't get %s property 'reg'\n",
|
|
dev->dev.of_node->full_name);
|
|
return -EFAULT;
|
|
}
|
|
dev_info(&dev->dev, "Of-device full name %s\n",
|
|
dev->dev.of_node->full_name);
|
|
dev_info(&dev->dev, "Regs: %pR\n", ®s);
|
|
|
|
rio_regs_win = ioremap(regs.start, resource_size(®s));
|
|
if (!rio_regs_win) {
|
|
dev_err(&dev->dev, "Unable to map rio register window\n");
|
|
rc = -ENOMEM;
|
|
goto err_rio_regs;
|
|
}
|
|
|
|
ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
|
|
if (!ops) {
|
|
rc = -ENOMEM;
|
|
goto err_ops;
|
|
}
|
|
ops->lcread = fsl_local_config_read;
|
|
ops->lcwrite = fsl_local_config_write;
|
|
ops->cread = fsl_rio_config_read;
|
|
ops->cwrite = fsl_rio_config_write;
|
|
ops->dsend = fsl_rio_doorbell_send;
|
|
ops->pwenable = fsl_rio_pw_enable;
|
|
ops->open_outb_mbox = fsl_open_outb_mbox;
|
|
ops->open_inb_mbox = fsl_open_inb_mbox;
|
|
ops->close_outb_mbox = fsl_close_outb_mbox;
|
|
ops->close_inb_mbox = fsl_close_inb_mbox;
|
|
ops->add_outb_message = fsl_add_outb_message;
|
|
ops->add_inb_buffer = fsl_add_inb_buffer;
|
|
ops->get_inb_message = fsl_get_inb_message;
|
|
ops->map_inb = fsl_map_inb_mem;
|
|
ops->unmap_inb = fsl_unmap_inb_mem;
|
|
|
|
rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0);
|
|
if (!rmu_node) {
|
|
dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n");
|
|
goto err_rmu;
|
|
}
|
|
rc = of_address_to_resource(rmu_node, 0, &rmu_regs);
|
|
if (rc) {
|
|
dev_err(&dev->dev, "Can't get %s property 'reg'\n",
|
|
rmu_node->full_name);
|
|
goto err_rmu;
|
|
}
|
|
rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs));
|
|
if (!rmu_regs_win) {
|
|
dev_err(&dev->dev, "Unable to map rmu register window\n");
|
|
rc = -ENOMEM;
|
|
goto err_rmu;
|
|
}
|
|
for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") {
|
|
rmu_np[tmp] = np;
|
|
tmp++;
|
|
}
|
|
|
|
/*set up doobell node*/
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit");
|
|
if (!np) {
|
|
dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n");
|
|
rc = -ENODEV;
|
|
goto err_dbell;
|
|
}
|
|
dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL);
|
|
if (!(dbell)) {
|
|
dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n");
|
|
rc = -ENOMEM;
|
|
goto err_dbell;
|
|
}
|
|
dbell->dev = &dev->dev;
|
|
dbell->bellirq = irq_of_parse_and_map(np, 1);
|
|
dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq);
|
|
|
|
aw = of_n_addr_cells(np);
|
|
dt_range = of_get_property(np, "reg", &rlen);
|
|
if (!dt_range) {
|
|
pr_err("%s: unable to find 'reg' property\n",
|
|
np->full_name);
|
|
rc = -ENOMEM;
|
|
goto err_pw;
|
|
}
|
|
range_start = of_read_number(dt_range, aw);
|
|
dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win +
|
|
(u32)range_start);
|
|
|
|
/*set up port write node*/
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit");
|
|
if (!np) {
|
|
dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n");
|
|
rc = -ENODEV;
|
|
goto err_pw;
|
|
}
|
|
pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL);
|
|
if (!(pw)) {
|
|
dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n");
|
|
rc = -ENOMEM;
|
|
goto err_pw;
|
|
}
|
|
pw->dev = &dev->dev;
|
|
pw->pwirq = irq_of_parse_and_map(np, 0);
|
|
dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq);
|
|
aw = of_n_addr_cells(np);
|
|
dt_range = of_get_property(np, "reg", &rlen);
|
|
if (!dt_range) {
|
|
pr_err("%s: unable to find 'reg' property\n",
|
|
np->full_name);
|
|
rc = -ENOMEM;
|
|
goto err;
|
|
}
|
|
range_start = of_read_number(dt_range, aw);
|
|
pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start);
|
|
|
|
/*set up ports node*/
|
|
for_each_child_of_node(dev->dev.of_node, np) {
|
|
port_index = of_get_property(np, "cell-index", NULL);
|
|
if (!port_index) {
|
|
dev_err(&dev->dev, "Can't get %s property 'cell-index'\n",
|
|
np->full_name);
|
|
continue;
|
|
}
|
|
|
|
dt_range = of_get_property(np, "ranges", &rlen);
|
|
if (!dt_range) {
|
|
dev_err(&dev->dev, "Can't get %s property 'ranges'\n",
|
|
np->full_name);
|
|
continue;
|
|
}
|
|
|
|
/* Get node address wide */
|
|
cell = of_get_property(np, "#address-cells", NULL);
|
|
if (cell)
|
|
aw = *cell;
|
|
else
|
|
aw = of_n_addr_cells(np);
|
|
/* Get node size wide */
|
|
cell = of_get_property(np, "#size-cells", NULL);
|
|
if (cell)
|
|
sw = *cell;
|
|
else
|
|
sw = of_n_size_cells(np);
|
|
/* Get parent address wide wide */
|
|
paw = of_n_addr_cells(np);
|
|
range_start = of_read_number(dt_range + aw, paw);
|
|
range_size = of_read_number(dt_range + aw + paw, sw);
|
|
|
|
dev_info(&dev->dev, "%s: LAW start 0x%016llx, size 0x%016llx.\n",
|
|
np->full_name, range_start, range_size);
|
|
|
|
port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
|
|
if (!port)
|
|
continue;
|
|
|
|
rc = rio_mport_initialize(port);
|
|
if (rc) {
|
|
kfree(port);
|
|
continue;
|
|
}
|
|
|
|
i = *port_index - 1;
|
|
port->index = (unsigned char)i;
|
|
|
|
priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
|
|
if (!priv) {
|
|
dev_err(&dev->dev, "Can't alloc memory for 'priv'\n");
|
|
kfree(port);
|
|
continue;
|
|
}
|
|
|
|
INIT_LIST_HEAD(&port->dbells);
|
|
port->iores.start = range_start;
|
|
port->iores.end = port->iores.start + range_size - 1;
|
|
port->iores.flags = IORESOURCE_MEM;
|
|
port->iores.name = "rio_io_win";
|
|
|
|
if (request_resource(&iomem_resource, &port->iores) < 0) {
|
|
dev_err(&dev->dev, "RIO: Error requesting master port region"
|
|
" 0x%016llx-0x%016llx\n",
|
|
(u64)port->iores.start, (u64)port->iores.end);
|
|
kfree(priv);
|
|
kfree(port);
|
|
continue;
|
|
}
|
|
sprintf(port->name, "RIO mport %d", i);
|
|
|
|
priv->dev = &dev->dev;
|
|
port->dev.parent = &dev->dev;
|
|
port->ops = ops;
|
|
port->priv = priv;
|
|
port->phys_efptr = 0x100;
|
|
priv->regs_win = rio_regs_win;
|
|
|
|
/* Probe the master port phy type */
|
|
ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20);
|
|
port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
|
|
if (port->phy_type == RIO_PHY_PARALLEL) {
|
|
dev_err(&dev->dev, "RIO: Parallel PHY type, unsupported port type!\n");
|
|
release_resource(&port->iores);
|
|
kfree(priv);
|
|
kfree(port);
|
|
continue;
|
|
}
|
|
dev_info(&dev->dev, "RapidIO PHY type: Serial\n");
|
|
/* Checking the port training status */
|
|
if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) {
|
|
dev_err(&dev->dev, "Port %d is not ready. "
|
|
"Try to restart connection...\n", i);
|
|
/* Disable ports */
|
|
out_be32(priv->regs_win
|
|
+ RIO_CCSR + i*0x20, 0);
|
|
/* Set 1x lane */
|
|
setbits32(priv->regs_win
|
|
+ RIO_CCSR + i*0x20, 0x02000000);
|
|
/* Enable ports */
|
|
setbits32(priv->regs_win
|
|
+ RIO_CCSR + i*0x20, 0x00600000);
|
|
msleep(100);
|
|
if (in_be32((priv->regs_win
|
|
+ RIO_ESCSR + i*0x20)) & 1) {
|
|
dev_err(&dev->dev,
|
|
"Port %d restart failed.\n", i);
|
|
release_resource(&port->iores);
|
|
kfree(priv);
|
|
kfree(port);
|
|
continue;
|
|
}
|
|
dev_info(&dev->dev, "Port %d restart success!\n", i);
|
|
}
|
|
fsl_rio_info(&dev->dev, ccsr);
|
|
|
|
port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
|
|
& RIO_PEF_CTLS) >> 4;
|
|
dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
|
|
port->sys_size ? 65536 : 256);
|
|
|
|
if (port->host_deviceid >= 0)
|
|
out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
|
|
RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
|
|
else
|
|
out_be32(priv->regs_win + RIO_GCCSR,
|
|
RIO_PORT_GEN_MASTER);
|
|
|
|
priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
|
|
+ ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET :
|
|
RIO_ATMU_REGS_PORT2_OFFSET));
|
|
|
|
priv->maint_atmu_regs = priv->atmu_regs + 1;
|
|
priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *)
|
|
(priv->regs_win +
|
|
((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET :
|
|
RIO_INB_ATMU_REGS_PORT2_OFFSET));
|
|
|
|
|
|
/* Set to receive any dist ID for serial RapidIO controller. */
|
|
if (port->phy_type == RIO_PHY_SERIAL)
|
|
out_be32((priv->regs_win
|
|
+ RIO_ISR_AACR + i*0x80), RIO_ISR_AACR_AA);
|
|
|
|
/* Configure maintenance transaction window */
|
|
out_be32(&priv->maint_atmu_regs->rowbar,
|
|
port->iores.start >> 12);
|
|
out_be32(&priv->maint_atmu_regs->rowar,
|
|
0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1));
|
|
|
|
priv->maint_win = ioremap(port->iores.start,
|
|
RIO_MAINT_WIN_SIZE);
|
|
|
|
rio_law_start = range_start;
|
|
|
|
fsl_rio_setup_rmu(port, rmu_np[i]);
|
|
fsl_rio_inbound_mem_init(priv);
|
|
|
|
dbell->mport[i] = port;
|
|
pw->mport[i] = port;
|
|
|
|
if (rio_register_mport(port)) {
|
|
release_resource(&port->iores);
|
|
kfree(priv);
|
|
kfree(port);
|
|
continue;
|
|
}
|
|
active_ports++;
|
|
}
|
|
|
|
if (!active_ports) {
|
|
rc = -ENOLINK;
|
|
goto err;
|
|
}
|
|
|
|
fsl_rio_doorbell_init(dbell);
|
|
fsl_rio_port_write_init(pw);
|
|
|
|
return 0;
|
|
err:
|
|
kfree(pw);
|
|
pw = NULL;
|
|
err_pw:
|
|
kfree(dbell);
|
|
dbell = NULL;
|
|
err_dbell:
|
|
iounmap(rmu_regs_win);
|
|
rmu_regs_win = NULL;
|
|
err_rmu:
|
|
kfree(ops);
|
|
err_ops:
|
|
iounmap(rio_regs_win);
|
|
rio_regs_win = NULL;
|
|
err_rio_regs:
|
|
return rc;
|
|
}
|
|
|
|
/* The probe function for RapidIO peer-to-peer network.
|
|
*/
|
|
static int fsl_of_rio_rpn_probe(struct platform_device *dev)
|
|
{
|
|
printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
|
|
dev->dev.of_node->full_name);
|
|
|
|
return fsl_rio_setup(dev);
|
|
};
|
|
|
|
static const struct of_device_id fsl_of_rio_rpn_ids[] = {
|
|
{
|
|
.compatible = "fsl,srio",
|
|
},
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver fsl_of_rio_rpn_driver = {
|
|
.driver = {
|
|
.name = "fsl-of-rio",
|
|
.of_match_table = fsl_of_rio_rpn_ids,
|
|
},
|
|
.probe = fsl_of_rio_rpn_probe,
|
|
};
|
|
|
|
static __init int fsl_of_rio_rpn_init(void)
|
|
{
|
|
return platform_driver_register(&fsl_of_rio_rpn_driver);
|
|
}
|
|
|
|
subsys_initcall(fsl_of_rio_rpn_init);
|