mirror of https://gitee.com/openkylin/linux.git
1030 lines
48 KiB
C
1030 lines
48 KiB
C
/*
|
|
Copyright 1994 Digital Equipment Corporation.
|
|
|
|
This software may be used and distributed according to the terms of the
|
|
GNU General Public License, incorporated herein by reference.
|
|
|
|
The author may be reached as davies@wanton.lkg.dec.com or Digital
|
|
Equipment Corporation, 550 King Street, Littleton MA 01460.
|
|
|
|
=========================================================================
|
|
*/
|
|
|
|
/*
|
|
** DC21040 CSR<1..15> Register Address Map
|
|
*/
|
|
#define DE4X5_BMR iobase+(0x000 << lp->bus) /* Bus Mode Register */
|
|
#define DE4X5_TPD iobase+(0x008 << lp->bus) /* Transmit Poll Demand Reg */
|
|
#define DE4X5_RPD iobase+(0x010 << lp->bus) /* Receive Poll Demand Reg */
|
|
#define DE4X5_RRBA iobase+(0x018 << lp->bus) /* RX Ring Base Address Reg */
|
|
#define DE4X5_TRBA iobase+(0x020 << lp->bus) /* TX Ring Base Address Reg */
|
|
#define DE4X5_STS iobase+(0x028 << lp->bus) /* Status Register */
|
|
#define DE4X5_OMR iobase+(0x030 << lp->bus) /* Operation Mode Register */
|
|
#define DE4X5_IMR iobase+(0x038 << lp->bus) /* Interrupt Mask Register */
|
|
#define DE4X5_MFC iobase+(0x040 << lp->bus) /* Missed Frame Counter */
|
|
#define DE4X5_APROM iobase+(0x048 << lp->bus) /* Ethernet Address PROM */
|
|
#define DE4X5_BROM iobase+(0x048 << lp->bus) /* Boot ROM Register */
|
|
#define DE4X5_SROM iobase+(0x048 << lp->bus) /* Serial ROM Register */
|
|
#define DE4X5_MII iobase+(0x048 << lp->bus) /* MII Interface Register */
|
|
#define DE4X5_DDR iobase+(0x050 << lp->bus) /* Data Diagnostic Register */
|
|
#define DE4X5_FDR iobase+(0x058 << lp->bus) /* Full Duplex Register */
|
|
#define DE4X5_GPT iobase+(0x058 << lp->bus) /* General Purpose Timer Reg.*/
|
|
#define DE4X5_GEP iobase+(0x060 << lp->bus) /* General Purpose Register */
|
|
#define DE4X5_SISR iobase+(0x060 << lp->bus) /* SIA Status Register */
|
|
#define DE4X5_SICR iobase+(0x068 << lp->bus) /* SIA Connectivity Register */
|
|
#define DE4X5_STRR iobase+(0x070 << lp->bus) /* SIA TX/RX Register */
|
|
#define DE4X5_SIGR iobase+(0x078 << lp->bus) /* SIA General Register */
|
|
|
|
/*
|
|
** EISA Register Address Map
|
|
*/
|
|
#define EISA_ID iobase+0x0c80 /* EISA ID Registers */
|
|
#define EISA_ID0 iobase+0x0c80 /* EISA ID Register 0 */
|
|
#define EISA_ID1 iobase+0x0c81 /* EISA ID Register 1 */
|
|
#define EISA_ID2 iobase+0x0c82 /* EISA ID Register 2 */
|
|
#define EISA_ID3 iobase+0x0c83 /* EISA ID Register 3 */
|
|
#define EISA_CR iobase+0x0c84 /* EISA Control Register */
|
|
#define EISA_REG0 iobase+0x0c88 /* EISA Configuration Register 0 */
|
|
#define EISA_REG1 iobase+0x0c89 /* EISA Configuration Register 1 */
|
|
#define EISA_REG2 iobase+0x0c8a /* EISA Configuration Register 2 */
|
|
#define EISA_REG3 iobase+0x0c8f /* EISA Configuration Register 3 */
|
|
#define EISA_APROM iobase+0x0c90 /* Ethernet Address PROM */
|
|
|
|
/*
|
|
** PCI/EISA Configuration Registers Address Map
|
|
*/
|
|
#define PCI_CFID iobase+0x0008 /* PCI Configuration ID Register */
|
|
#define PCI_CFCS iobase+0x000c /* PCI Command/Status Register */
|
|
#define PCI_CFRV iobase+0x0018 /* PCI Revision Register */
|
|
#define PCI_CFLT iobase+0x001c /* PCI Latency Timer Register */
|
|
#define PCI_CBIO iobase+0x0028 /* PCI Base I/O Register */
|
|
#define PCI_CBMA iobase+0x002c /* PCI Base Memory Address Register */
|
|
#define PCI_CBER iobase+0x0030 /* PCI Expansion ROM Base Address Reg. */
|
|
#define PCI_CFIT iobase+0x003c /* PCI Configuration Interrupt Register */
|
|
#define PCI_CFDA iobase+0x0040 /* PCI Driver Area Register */
|
|
#define PCI_CFDD iobase+0x0041 /* PCI Driver Dependent Area Register */
|
|
#define PCI_CFPM iobase+0x0043 /* PCI Power Management Area Register */
|
|
|
|
/*
|
|
** EISA Configuration Register 0 bit definitions
|
|
*/
|
|
#define ER0_BSW 0x80 /* EISA Bus Slave Width, 1: 32 bits */
|
|
#define ER0_BMW 0x40 /* EISA Bus Master Width, 1: 32 bits */
|
|
#define ER0_EPT 0x20 /* EISA PREEMPT Time, 0: 23 BCLKs */
|
|
#define ER0_ISTS 0x10 /* Interrupt Status (X) */
|
|
#define ER0_LI 0x08 /* Latch Interrupts */
|
|
#define ER0_INTL 0x06 /* INTerrupt Level */
|
|
#define ER0_INTT 0x01 /* INTerrupt Type, 0: Level, 1: Edge */
|
|
|
|
/*
|
|
** EISA Configuration Register 1 bit definitions
|
|
*/
|
|
#define ER1_IAM 0xe0 /* ISA Address Mode */
|
|
#define ER1_IAE 0x10 /* ISA Addressing Enable */
|
|
#define ER1_UPIN 0x0f /* User Pins */
|
|
|
|
/*
|
|
** EISA Configuration Register 2 bit definitions
|
|
*/
|
|
#define ER2_BRS 0xc0 /* Boot ROM Size */
|
|
#define ER2_BRA 0x3c /* Boot ROM Address <16:13> */
|
|
|
|
/*
|
|
** EISA Configuration Register 3 bit definitions
|
|
*/
|
|
#define ER3_BWE 0x40 /* Burst Write Enable */
|
|
#define ER3_BRE 0x04 /* Burst Read Enable */
|
|
#define ER3_LSR 0x02 /* Local Software Reset */
|
|
|
|
/*
|
|
** PCI Configuration ID Register (PCI_CFID). The Device IDs are left
|
|
** shifted 8 bits to allow detection of DC21142 and DC21143 variants with
|
|
** the configuration revision register step number.
|
|
*/
|
|
#define CFID_DID 0xff00 /* Device ID */
|
|
#define CFID_VID 0x00ff /* Vendor ID */
|
|
#define DC21040_DID 0x0200 /* Unique Device ID # */
|
|
#define DC21040_VID 0x1011 /* DC21040 Manufacturer */
|
|
#define DC21041_DID 0x1400 /* Unique Device ID # */
|
|
#define DC21041_VID 0x1011 /* DC21041 Manufacturer */
|
|
#define DC21140_DID 0x0900 /* Unique Device ID # */
|
|
#define DC21140_VID 0x1011 /* DC21140 Manufacturer */
|
|
#define DC2114x_DID 0x1900 /* Unique Device ID # */
|
|
#define DC2114x_VID 0x1011 /* DC2114[23] Manufacturer */
|
|
|
|
/*
|
|
** Chipset defines
|
|
*/
|
|
#define DC21040 DC21040_DID
|
|
#define DC21041 DC21041_DID
|
|
#define DC21140 DC21140_DID
|
|
#define DC2114x DC2114x_DID
|
|
#define DC21142 (DC2114x_DID | 0x0010)
|
|
#define DC21143 (DC2114x_DID | 0x0030)
|
|
#define DC2114x_BRK 0x0020 /* CFRV break between DC21142 & DC21143 */
|
|
|
|
#define is_DC21040 ((vendor == DC21040_VID) && (device == DC21040_DID))
|
|
#define is_DC21041 ((vendor == DC21041_VID) && (device == DC21041_DID))
|
|
#define is_DC21140 ((vendor == DC21140_VID) && (device == DC21140_DID))
|
|
#define is_DC2114x ((vendor == DC2114x_VID) && (device == DC2114x_DID))
|
|
#define is_DC21142 ((vendor == DC2114x_VID) && (device == DC21142))
|
|
#define is_DC21143 ((vendor == DC2114x_VID) && (device == DC21143))
|
|
|
|
/*
|
|
** PCI Configuration Command/Status Register (PCI_CFCS)
|
|
*/
|
|
#define CFCS_DPE 0x80000000 /* Detected Parity Error (S) */
|
|
#define CFCS_SSE 0x40000000 /* Signal System Error (S) */
|
|
#define CFCS_RMA 0x20000000 /* Receive Master Abort (S) */
|
|
#define CFCS_RTA 0x10000000 /* Receive Target Abort (S) */
|
|
#define CFCS_DST 0x06000000 /* DEVSEL Timing (S) */
|
|
#define CFCS_DPR 0x01000000 /* Data Parity Report (S) */
|
|
#define CFCS_FBB 0x00800000 /* Fast Back-To-Back (S) */
|
|
#define CFCS_SEE 0x00000100 /* System Error Enable (C) */
|
|
#define CFCS_PER 0x00000040 /* Parity Error Response (C) */
|
|
#define CFCS_MO 0x00000004 /* Master Operation (C) */
|
|
#define CFCS_MSA 0x00000002 /* Memory Space Access (C) */
|
|
#define CFCS_IOSA 0x00000001 /* I/O Space Access (C) */
|
|
|
|
/*
|
|
** PCI Configuration Revision Register (PCI_CFRV)
|
|
*/
|
|
#define CFRV_BC 0xff000000 /* Base Class */
|
|
#define CFRV_SC 0x00ff0000 /* Subclass */
|
|
#define CFRV_RN 0x000000f0 /* Revision Number */
|
|
#define CFRV_SN 0x0000000f /* Step Number */
|
|
#define BASE_CLASS 0x02000000 /* Indicates Network Controller */
|
|
#define SUB_CLASS 0x00000000 /* Indicates Ethernet Controller */
|
|
#define STEP_NUMBER 0x00000020 /* Increments for future chips */
|
|
#define REV_NUMBER 0x00000003 /* 0x00, 0x01, 0x02, 0x03: Rev in Step */
|
|
#define CFRV_MASK 0xffff0000 /* Register mask */
|
|
|
|
/*
|
|
** PCI Configuration Latency Timer Register (PCI_CFLT)
|
|
*/
|
|
#define CFLT_BC 0x0000ff00 /* Latency Timer bits */
|
|
|
|
/*
|
|
** PCI Configuration Base I/O Address Register (PCI_CBIO)
|
|
*/
|
|
#define CBIO_MASK -128 /* Base I/O Address Mask */
|
|
#define CBIO_IOSI 0x00000001 /* I/O Space Indicator (RO, value is 1) */
|
|
|
|
/*
|
|
** PCI Configuration Card Information Structure Register (PCI_CCIS)
|
|
*/
|
|
#define CCIS_ROMI 0xf0000000 /* ROM Image */
|
|
#define CCIS_ASO 0x0ffffff8 /* Address Space Offset */
|
|
#define CCIS_ASI 0x00000007 /* Address Space Indicator */
|
|
|
|
/*
|
|
** PCI Configuration Subsystem ID Register (PCI_SSID)
|
|
*/
|
|
#define SSID_SSID 0xffff0000 /* Subsystem ID */
|
|
#define SSID_SVID 0x0000ffff /* Subsystem Vendor ID */
|
|
|
|
/*
|
|
** PCI Configuration Expansion ROM Base Address Register (PCI_CBER)
|
|
*/
|
|
#define CBER_MASK 0xfffffc00 /* Expansion ROM Base Address Mask */
|
|
#define CBER_ROME 0x00000001 /* ROM Enable */
|
|
|
|
/*
|
|
** PCI Configuration Interrupt Register (PCI_CFIT)
|
|
*/
|
|
#define CFIT_MXLT 0xff000000 /* MAX_LAT Value (0.25us periods) */
|
|
#define CFIT_MNGT 0x00ff0000 /* MIN_GNT Value (0.25us periods) */
|
|
#define CFIT_IRQP 0x0000ff00 /* Interrupt Pin */
|
|
#define CFIT_IRQL 0x000000ff /* Interrupt Line */
|
|
|
|
/*
|
|
** PCI Configuration Power Management Area Register (PCI_CFPM)
|
|
*/
|
|
#define SLEEP 0x80 /* Power Saving Sleep Mode */
|
|
#define SNOOZE 0x40 /* Power Saving Snooze Mode */
|
|
#define WAKEUP 0x00 /* Power Saving Wakeup */
|
|
|
|
#define PCI_CFDA_DSU 0x41 /* 8 bit Configuration Space Address */
|
|
#define PCI_CFDA_PSM 0x43 /* 8 bit Configuration Space Address */
|
|
|
|
/*
|
|
** DC21040 Bus Mode Register (DE4X5_BMR)
|
|
*/
|
|
#define BMR_RML 0x00200000 /* [Memory] Read Multiple */
|
|
#define BMR_DBO 0x00100000 /* Descriptor Byte Ordering (Endian) */
|
|
#define BMR_TAP 0x000e0000 /* Transmit Automatic Polling */
|
|
#define BMR_DAS 0x00010000 /* Diagnostic Address Space */
|
|
#define BMR_CAL 0x0000c000 /* Cache Alignment */
|
|
#define BMR_PBL 0x00003f00 /* Programmable Burst Length */
|
|
#define BMR_BLE 0x00000080 /* Big/Little Endian */
|
|
#define BMR_DSL 0x0000007c /* Descriptor Skip Length */
|
|
#define BMR_BAR 0x00000002 /* Bus ARbitration */
|
|
#define BMR_SWR 0x00000001 /* Software Reset */
|
|
|
|
/* Timings here are for 10BASE-T/AUI only*/
|
|
#define TAP_NOPOLL 0x00000000 /* No automatic polling */
|
|
#define TAP_200US 0x00020000 /* TX automatic polling every 200us */
|
|
#define TAP_800US 0x00040000 /* TX automatic polling every 800us */
|
|
#define TAP_1_6MS 0x00060000 /* TX automatic polling every 1.6ms */
|
|
#define TAP_12_8US 0x00080000 /* TX automatic polling every 12.8us */
|
|
#define TAP_25_6US 0x000a0000 /* TX automatic polling every 25.6us */
|
|
#define TAP_51_2US 0x000c0000 /* TX automatic polling every 51.2us */
|
|
#define TAP_102_4US 0x000e0000 /* TX automatic polling every 102.4us */
|
|
|
|
#define CAL_NOUSE 0x00000000 /* Not used */
|
|
#define CAL_8LONG 0x00004000 /* 8-longword alignment */
|
|
#define CAL_16LONG 0x00008000 /* 16-longword alignment */
|
|
#define CAL_32LONG 0x0000c000 /* 32-longword alignment */
|
|
|
|
#define PBL_0 0x00000000 /* DMA burst length = amount in RX FIFO */
|
|
#define PBL_1 0x00000100 /* 1 longword DMA burst length */
|
|
#define PBL_2 0x00000200 /* 2 longwords DMA burst length */
|
|
#define PBL_4 0x00000400 /* 4 longwords DMA burst length */
|
|
#define PBL_8 0x00000800 /* 8 longwords DMA burst length */
|
|
#define PBL_16 0x00001000 /* 16 longwords DMA burst length */
|
|
#define PBL_32 0x00002000 /* 32 longwords DMA burst length */
|
|
|
|
#define DSL_0 0x00000000 /* 0 longword / descriptor */
|
|
#define DSL_1 0x00000004 /* 1 longword / descriptor */
|
|
#define DSL_2 0x00000008 /* 2 longwords / descriptor */
|
|
#define DSL_4 0x00000010 /* 4 longwords / descriptor */
|
|
#define DSL_8 0x00000020 /* 8 longwords / descriptor */
|
|
#define DSL_16 0x00000040 /* 16 longwords / descriptor */
|
|
#define DSL_32 0x00000080 /* 32 longwords / descriptor */
|
|
|
|
/*
|
|
** DC21040 Transmit Poll Demand Register (DE4X5_TPD)
|
|
*/
|
|
#define TPD 0x00000001 /* Transmit Poll Demand */
|
|
|
|
/*
|
|
** DC21040 Receive Poll Demand Register (DE4X5_RPD)
|
|
*/
|
|
#define RPD 0x00000001 /* Receive Poll Demand */
|
|
|
|
/*
|
|
** DC21040 Receive Ring Base Address Register (DE4X5_RRBA)
|
|
*/
|
|
#define RRBA 0xfffffffc /* RX Descriptor List Start Address */
|
|
|
|
/*
|
|
** DC21040 Transmit Ring Base Address Register (DE4X5_TRBA)
|
|
*/
|
|
#define TRBA 0xfffffffc /* TX Descriptor List Start Address */
|
|
|
|
/*
|
|
** Status Register (DE4X5_STS)
|
|
*/
|
|
#define STS_GPI 0x04000000 /* General Purpose Port Interrupt */
|
|
#define STS_BE 0x03800000 /* Bus Error Bits */
|
|
#define STS_TS 0x00700000 /* Transmit Process State */
|
|
#define STS_RS 0x000e0000 /* Receive Process State */
|
|
#define STS_NIS 0x00010000 /* Normal Interrupt Summary */
|
|
#define STS_AIS 0x00008000 /* Abnormal Interrupt Summary */
|
|
#define STS_ER 0x00004000 /* Early Receive */
|
|
#define STS_FBE 0x00002000 /* Fatal Bus Error */
|
|
#define STS_SE 0x00002000 /* System Error */
|
|
#define STS_LNF 0x00001000 /* Link Fail */
|
|
#define STS_FD 0x00000800 /* Full-Duplex Short Frame Received */
|
|
#define STS_TM 0x00000800 /* Timer Expired (DC21041) */
|
|
#define STS_ETI 0x00000400 /* Early Transmit Interrupt */
|
|
#define STS_AT 0x00000400 /* AUI/TP Pin */
|
|
#define STS_RWT 0x00000200 /* Receive Watchdog Time-Out */
|
|
#define STS_RPS 0x00000100 /* Receive Process Stopped */
|
|
#define STS_RU 0x00000080 /* Receive Buffer Unavailable */
|
|
#define STS_RI 0x00000040 /* Receive Interrupt */
|
|
#define STS_UNF 0x00000020 /* Transmit Underflow */
|
|
#define STS_LNP 0x00000010 /* Link Pass */
|
|
#define STS_ANC 0x00000010 /* Autonegotiation Complete */
|
|
#define STS_TJT 0x00000008 /* Transmit Jabber Time-Out */
|
|
#define STS_TU 0x00000004 /* Transmit Buffer Unavailable */
|
|
#define STS_TPS 0x00000002 /* Transmit Process Stopped */
|
|
#define STS_TI 0x00000001 /* Transmit Interrupt */
|
|
|
|
#define EB_PAR 0x00000000 /* Parity Error */
|
|
#define EB_MA 0x00800000 /* Master Abort */
|
|
#define EB_TA 0x01000000 /* Target Abort */
|
|
#define EB_RES0 0x01800000 /* Reserved */
|
|
#define EB_RES1 0x02000000 /* Reserved */
|
|
|
|
#define TS_STOP 0x00000000 /* Stopped */
|
|
#define TS_FTD 0x00100000 /* Fetch Transmit Descriptor */
|
|
#define TS_WEOT 0x00200000 /* Wait for End Of Transmission */
|
|
#define TS_QDAT 0x00300000 /* Queue skb data into TX FIFO */
|
|
#define TS_RES 0x00400000 /* Reserved */
|
|
#define TS_SPKT 0x00500000 /* Setup Packet */
|
|
#define TS_SUSP 0x00600000 /* Suspended */
|
|
#define TS_CLTD 0x00700000 /* Close Transmit Descriptor */
|
|
|
|
#define RS_STOP 0x00000000 /* Stopped */
|
|
#define RS_FRD 0x00020000 /* Fetch Receive Descriptor */
|
|
#define RS_CEOR 0x00040000 /* Check for End of Receive Packet */
|
|
#define RS_WFRP 0x00060000 /* Wait for Receive Packet */
|
|
#define RS_SUSP 0x00080000 /* Suspended */
|
|
#define RS_CLRD 0x000a0000 /* Close Receive Descriptor */
|
|
#define RS_FLUSH 0x000c0000 /* Flush RX FIFO */
|
|
#define RS_QRFS 0x000e0000 /* Queue RX FIFO into RX Skb */
|
|
|
|
#define INT_CANCEL 0x0001ffff /* For zeroing all interrupt sources */
|
|
|
|
/*
|
|
** Operation Mode Register (DE4X5_OMR)
|
|
*/
|
|
#define OMR_SC 0x80000000 /* Special Capture Effect Enable */
|
|
#define OMR_RA 0x40000000 /* Receive All */
|
|
#define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */
|
|
#define OMR_SCR 0x01000000 /* Scrambler Mode */
|
|
#define OMR_PCS 0x00800000 /* PCS Function */
|
|
#define OMR_TTM 0x00400000 /* Transmit Threshold Mode */
|
|
#define OMR_SF 0x00200000 /* Store and Forward */
|
|
#define OMR_HBD 0x00080000 /* HeartBeat Disable */
|
|
#define OMR_PS 0x00040000 /* Port Select */
|
|
#define OMR_CA 0x00020000 /* Capture Effect Enable */
|
|
#define OMR_BP 0x00010000 /* Back Pressure */
|
|
#define OMR_TR 0x0000c000 /* Threshold Control Bits */
|
|
#define OMR_ST 0x00002000 /* Start/Stop Transmission Command */
|
|
#define OMR_FC 0x00001000 /* Force Collision Mode */
|
|
#define OMR_OM 0x00000c00 /* Operating Mode */
|
|
#define OMR_FDX 0x00000200 /* Full Duplex Mode */
|
|
#define OMR_FKD 0x00000100 /* Flaky Oscillator Disable */
|
|
#define OMR_PM 0x00000080 /* Pass All Multicast */
|
|
#define OMR_PR 0x00000040 /* Promiscuous Mode */
|
|
#define OMR_SB 0x00000020 /* Start/Stop Backoff Counter */
|
|
#define OMR_IF 0x00000010 /* Inverse Filtering */
|
|
#define OMR_PB 0x00000008 /* Pass Bad Frames */
|
|
#define OMR_HO 0x00000004 /* Hash Only Filtering Mode */
|
|
#define OMR_SR 0x00000002 /* Start/Stop Receive */
|
|
#define OMR_HP 0x00000001 /* Hash/Perfect Receive Filtering Mode */
|
|
|
|
#define TR_72 0x00000000 /* Threshold set to 72 (128) bytes */
|
|
#define TR_96 0x00004000 /* Threshold set to 96 (256) bytes */
|
|
#define TR_128 0x00008000 /* Threshold set to 128 (512) bytes */
|
|
#define TR_160 0x0000c000 /* Threshold set to 160 (1024) bytes */
|
|
|
|
#define OMR_DEF (OMR_SDP)
|
|
#define OMR_SIA (OMR_SDP | OMR_TTM)
|
|
#define OMR_SYM (OMR_SDP | OMR_SCR | OMR_PCS | OMR_HBD | OMR_PS)
|
|
#define OMR_MII_10 (OMR_SDP | OMR_TTM | OMR_PS)
|
|
#define OMR_MII_100 (OMR_SDP | OMR_HBD | OMR_PS)
|
|
|
|
/*
|
|
** DC21040 Interrupt Mask Register (DE4X5_IMR)
|
|
*/
|
|
#define IMR_GPM 0x04000000 /* General Purpose Port Mask */
|
|
#define IMR_NIM 0x00010000 /* Normal Interrupt Summary Mask */
|
|
#define IMR_AIM 0x00008000 /* Abnormal Interrupt Summary Mask */
|
|
#define IMR_ERM 0x00004000 /* Early Receive Mask */
|
|
#define IMR_FBM 0x00002000 /* Fatal Bus Error Mask */
|
|
#define IMR_SEM 0x00002000 /* System Error Mask */
|
|
#define IMR_LFM 0x00001000 /* Link Fail Mask */
|
|
#define IMR_FDM 0x00000800 /* Full-Duplex (Short Frame) Mask */
|
|
#define IMR_TMM 0x00000800 /* Timer Expired Mask (DC21041) */
|
|
#define IMR_ETM 0x00000400 /* Early Transmit Interrupt Mask */
|
|
#define IMR_ATM 0x00000400 /* AUI/TP Switch Mask */
|
|
#define IMR_RWM 0x00000200 /* Receive Watchdog Time-Out Mask */
|
|
#define IMR_RSM 0x00000100 /* Receive Stopped Mask */
|
|
#define IMR_RUM 0x00000080 /* Receive Buffer Unavailable Mask */
|
|
#define IMR_RIM 0x00000040 /* Receive Interrupt Mask */
|
|
#define IMR_UNM 0x00000020 /* Underflow Interrupt Mask */
|
|
#define IMR_ANM 0x00000010 /* Autonegotiation Complete Mask */
|
|
#define IMR_LPM 0x00000010 /* Link Pass */
|
|
#define IMR_TJM 0x00000008 /* Transmit Time-Out Jabber Mask */
|
|
#define IMR_TUM 0x00000004 /* Transmit Buffer Unavailable Mask */
|
|
#define IMR_TSM 0x00000002 /* Transmission Stopped Mask */
|
|
#define IMR_TIM 0x00000001 /* Transmit Interrupt Mask */
|
|
|
|
/*
|
|
** Missed Frames and FIFO Overflow Counters (DE4X5_MFC)
|
|
*/
|
|
#define MFC_FOCO 0x10000000 /* FIFO Overflow Counter Overflow Bit */
|
|
#define MFC_FOC 0x0ffe0000 /* FIFO Overflow Counter Bits */
|
|
#define MFC_OVFL 0x00010000 /* Missed Frames Counter Overflow Bit */
|
|
#define MFC_CNTR 0x0000ffff /* Missed Frames Counter Bits */
|
|
#define MFC_FOCM 0x1ffe0000 /* FIFO Overflow Counter Mask */
|
|
|
|
/*
|
|
** DC21040 Ethernet Address PROM (DE4X5_APROM)
|
|
*/
|
|
#define APROM_DN 0x80000000 /* Data Not Valid */
|
|
#define APROM_DT 0x000000ff /* Address Byte */
|
|
|
|
/*
|
|
** DC21041 Boot/Ethernet Address ROM (DE4X5_BROM)
|
|
*/
|
|
#define BROM_MODE 0x00008000 /* MODE_1: 0, MODE_0: 1 (read only) */
|
|
#define BROM_RD 0x00004000 /* Read from Boot ROM */
|
|
#define BROM_WR 0x00002000 /* Write to Boot ROM */
|
|
#define BROM_BR 0x00001000 /* Select Boot ROM when set */
|
|
#define BROM_SR 0x00000800 /* Select Serial ROM when set */
|
|
#define BROM_REG 0x00000400 /* External Register Select */
|
|
#define BROM_DT 0x000000ff /* Data Byte */
|
|
|
|
/*
|
|
** DC21041 Serial/Ethernet Address ROM (DE4X5_SROM, DE4X5_MII)
|
|
*/
|
|
#define MII_MDI 0x00080000 /* MII Management Data In */
|
|
#define MII_MDO 0x00060000 /* MII Management Mode/Data Out */
|
|
#define MII_MRD 0x00040000 /* MII Management Define Read Mode */
|
|
#define MII_MWR 0x00000000 /* MII Management Define Write Mode */
|
|
#define MII_MDT 0x00020000 /* MII Management Data Out */
|
|
#define MII_MDC 0x00010000 /* MII Management Clock */
|
|
#define MII_RD 0x00004000 /* Read from MII */
|
|
#define MII_WR 0x00002000 /* Write to MII */
|
|
#define MII_SEL 0x00000800 /* Select MII when RESET */
|
|
|
|
#define SROM_MODE 0x00008000 /* MODE_1: 0, MODE_0: 1 (read only) */
|
|
#define SROM_RD 0x00004000 /* Read from Boot ROM */
|
|
#define SROM_WR 0x00002000 /* Write to Boot ROM */
|
|
#define SROM_BR 0x00001000 /* Select Boot ROM when set */
|
|
#define SROM_SR 0x00000800 /* Select Serial ROM when set */
|
|
#define SROM_REG 0x00000400 /* External Register Select */
|
|
#define SROM_DT 0x000000ff /* Data Byte */
|
|
|
|
#define DT_OUT 0x00000008 /* Serial Data Out */
|
|
#define DT_IN 0x00000004 /* Serial Data In */
|
|
#define DT_CLK 0x00000002 /* Serial ROM Clock */
|
|
#define DT_CS 0x00000001 /* Serial ROM Chip Select */
|
|
|
|
#define MII_PREAMBLE 0xffffffff /* MII Management Preamble */
|
|
#define MII_TEST 0xaaaaaaaa /* MII Test Signal */
|
|
#define MII_STRD 0x06 /* Start of Frame+Op Code: use low nibble */
|
|
#define MII_STWR 0x0a /* Start of Frame+Op Code: use low nibble */
|
|
|
|
#define MII_CR 0x00 /* MII Management Control Register */
|
|
#define MII_SR 0x01 /* MII Management Status Register */
|
|
#define MII_ID0 0x02 /* PHY Identifier Register 0 */
|
|
#define MII_ID1 0x03 /* PHY Identifier Register 1 */
|
|
#define MII_ANA 0x04 /* Auto Negotiation Advertisement */
|
|
#define MII_ANLPA 0x05 /* Auto Negotiation Link Partner Ability */
|
|
#define MII_ANE 0x06 /* Auto Negotiation Expansion */
|
|
#define MII_ANP 0x07 /* Auto Negotiation Next Page TX */
|
|
|
|
#define DE4X5_MAX_MII 32 /* Maximum address of MII PHY devices */
|
|
|
|
/*
|
|
** MII Management Control Register
|
|
*/
|
|
#define MII_CR_RST 0x8000 /* RESET the PHY chip */
|
|
#define MII_CR_LPBK 0x4000 /* Loopback enable */
|
|
#define MII_CR_SPD 0x2000 /* 0: 10Mb/s; 1: 100Mb/s */
|
|
#define MII_CR_10 0x0000 /* Set 10Mb/s */
|
|
#define MII_CR_100 0x2000 /* Set 100Mb/s */
|
|
#define MII_CR_ASSE 0x1000 /* Auto Speed Select Enable */
|
|
#define MII_CR_PD 0x0800 /* Power Down */
|
|
#define MII_CR_ISOL 0x0400 /* Isolate Mode */
|
|
#define MII_CR_RAN 0x0200 /* Restart Auto Negotiation */
|
|
#define MII_CR_FDM 0x0100 /* Full Duplex Mode */
|
|
#define MII_CR_CTE 0x0080 /* Collision Test Enable */
|
|
|
|
/*
|
|
** MII Management Status Register
|
|
*/
|
|
#define MII_SR_T4C 0x8000 /* 100BASE-T4 capable */
|
|
#define MII_SR_TXFD 0x4000 /* 100BASE-TX Full Duplex capable */
|
|
#define MII_SR_TXHD 0x2000 /* 100BASE-TX Half Duplex capable */
|
|
#define MII_SR_TFD 0x1000 /* 10BASE-T Full Duplex capable */
|
|
#define MII_SR_THD 0x0800 /* 10BASE-T Half Duplex capable */
|
|
#define MII_SR_ASSC 0x0020 /* Auto Speed Selection Complete*/
|
|
#define MII_SR_RFD 0x0010 /* Remote Fault Detected */
|
|
#define MII_SR_ANC 0x0008 /* Auto Negotiation capable */
|
|
#define MII_SR_LKS 0x0004 /* Link Status */
|
|
#define MII_SR_JABD 0x0002 /* Jabber Detect */
|
|
#define MII_SR_XC 0x0001 /* Extended Capabilities */
|
|
|
|
/*
|
|
** MII Management Auto Negotiation Advertisement Register
|
|
*/
|
|
#define MII_ANA_TAF 0x03e0 /* Technology Ability Field */
|
|
#define MII_ANA_T4AM 0x0200 /* T4 Technology Ability Mask */
|
|
#define MII_ANA_TXAM 0x0180 /* TX Technology Ability Mask */
|
|
#define MII_ANA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */
|
|
#define MII_ANA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */
|
|
#define MII_ANA_100M 0x0380 /* 100Mb Technology Ability Mask */
|
|
#define MII_ANA_10M 0x0060 /* 10Mb Technology Ability Mask */
|
|
#define MII_ANA_CSMA 0x0001 /* CSMA-CD Capable */
|
|
|
|
/*
|
|
** MII Management Auto Negotiation Remote End Register
|
|
*/
|
|
#define MII_ANLPA_NP 0x8000 /* Next Page (Enable) */
|
|
#define MII_ANLPA_ACK 0x4000 /* Remote Acknowledge */
|
|
#define MII_ANLPA_RF 0x2000 /* Remote Fault */
|
|
#define MII_ANLPA_TAF 0x03e0 /* Technology Ability Field */
|
|
#define MII_ANLPA_T4AM 0x0200 /* T4 Technology Ability Mask */
|
|
#define MII_ANLPA_TXAM 0x0180 /* TX Technology Ability Mask */
|
|
#define MII_ANLPA_FDAM 0x0140 /* Full Duplex Technology Ability Mask */
|
|
#define MII_ANLPA_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */
|
|
#define MII_ANLPA_100M 0x0380 /* 100Mb Technology Ability Mask */
|
|
#define MII_ANLPA_10M 0x0060 /* 10Mb Technology Ability Mask */
|
|
#define MII_ANLPA_CSMA 0x0001 /* CSMA-CD Capable */
|
|
|
|
/*
|
|
** SROM Media Definitions (ABG SROM Section)
|
|
*/
|
|
#define MEDIA_NWAY 0x0080 /* Nway (Auto Negotiation) on PHY */
|
|
#define MEDIA_MII 0x0040 /* MII Present on the adapter */
|
|
#define MEDIA_FIBRE 0x0008 /* Fibre Media present */
|
|
#define MEDIA_AUI 0x0004 /* AUI Media present */
|
|
#define MEDIA_TP 0x0002 /* TP Media present */
|
|
#define MEDIA_BNC 0x0001 /* BNC Media present */
|
|
|
|
/*
|
|
** SROM Definitions (Digital Semiconductor Format)
|
|
*/
|
|
#define SROM_SSVID 0x0000 /* Sub-system Vendor ID offset */
|
|
#define SROM_SSID 0x0002 /* Sub-system ID offset */
|
|
#define SROM_CISPL 0x0004 /* CardBus CIS Pointer low offset */
|
|
#define SROM_CISPH 0x0006 /* CardBus CIS Pointer high offset */
|
|
#define SROM_IDCRC 0x0010 /* ID Block CRC offset*/
|
|
#define SROM_RSVD2 0x0011 /* ID Reserved 2 offset */
|
|
#define SROM_SFV 0x0012 /* SROM Format Version offset */
|
|
#define SROM_CCNT 0x0013 /* Controller Count offset */
|
|
#define SROM_HWADD 0x0014 /* Hardware Address offset */
|
|
#define SROM_MRSVD 0x007c /* Manufacturer Reserved offset*/
|
|
#define SROM_CRC 0x007e /* SROM CRC offset */
|
|
|
|
/*
|
|
** SROM Media Connection Definitions
|
|
*/
|
|
#define SROM_10BT 0x0000 /* 10BASE-T half duplex */
|
|
#define SROM_10BTN 0x0100 /* 10BASE-T with Nway */
|
|
#define SROM_10BTF 0x0204 /* 10BASE-T full duplex */
|
|
#define SROM_10BTNLP 0x0400 /* 10BASE-T without Link Pass test */
|
|
#define SROM_10B2 0x0001 /* 10BASE-2 (BNC) */
|
|
#define SROM_10B5 0x0002 /* 10BASE-5 (AUI) */
|
|
#define SROM_100BTH 0x0003 /* 100BASE-T half duplex */
|
|
#define SROM_100BTF 0x0205 /* 100BASE-T full duplex */
|
|
#define SROM_100BT4 0x0006 /* 100BASE-T4 */
|
|
#define SROM_100BFX 0x0007 /* 100BASE-FX half duplex (Fiber) */
|
|
#define SROM_M10BT 0x0009 /* MII 10BASE-T half duplex */
|
|
#define SROM_M10BTF 0x020a /* MII 10BASE-T full duplex */
|
|
#define SROM_M100BT 0x000d /* MII 100BASE-T half duplex */
|
|
#define SROM_M100BTF 0x020e /* MII 100BASE-T full duplex */
|
|
#define SROM_M100BT4 0x000f /* MII 100BASE-T4 */
|
|
#define SROM_M100BF 0x0010 /* MII 100BASE-FX half duplex */
|
|
#define SROM_M100BFF 0x0211 /* MII 100BASE-FX full duplex */
|
|
#define SROM_PDA 0x0800 /* Powerup & Dynamic Autosense */
|
|
#define SROM_PAO 0x8800 /* Powerup Autosense Only */
|
|
#define SROM_NSMI 0xffff /* No Selected Media Information */
|
|
|
|
/*
|
|
** SROM Media Definitions
|
|
*/
|
|
#define SROM_10BASET 0x0000 /* 10BASE-T half duplex */
|
|
#define SROM_10BASE2 0x0001 /* 10BASE-2 (BNC) */
|
|
#define SROM_10BASE5 0x0002 /* 10BASE-5 (AUI) */
|
|
#define SROM_100BASET 0x0003 /* 100BASE-T half duplex */
|
|
#define SROM_10BASETF 0x0004 /* 10BASE-T full duplex */
|
|
#define SROM_100BASETF 0x0005 /* 100BASE-T full duplex */
|
|
#define SROM_100BASET4 0x0006 /* 100BASE-T4 */
|
|
#define SROM_100BASEF 0x0007 /* 100BASE-FX half duplex */
|
|
#define SROM_100BASEFF 0x0008 /* 100BASE-FX full duplex */
|
|
|
|
#define BLOCK_LEN 0x7f /* Extended blocks length mask */
|
|
#define EXT_FIELD 0x40 /* Extended blocks extension field bit */
|
|
#define MEDIA_CODE 0x3f /* Extended blocks media code mask */
|
|
|
|
/*
|
|
** SROM Compact Format Block Masks
|
|
*/
|
|
#define COMPACT_FI 0x80 /* Format Indicator */
|
|
#define COMPACT_LEN 0x04 /* Length */
|
|
#define COMPACT_MC 0x3f /* Media Code */
|
|
|
|
/*
|
|
** SROM Extended Format Block Type 0 Masks
|
|
*/
|
|
#define BLOCK0_FI 0x80 /* Format Indicator */
|
|
#define BLOCK0_MCS 0x80 /* Media Code byte Sign */
|
|
#define BLOCK0_MC 0x3f /* Media Code */
|
|
|
|
/*
|
|
** DC21040 Full Duplex Register (DE4X5_FDR)
|
|
*/
|
|
#define FDR_FDACV 0x0000ffff /* Full Duplex Auto Configuration Value */
|
|
|
|
/*
|
|
** DC21041 General Purpose Timer Register (DE4X5_GPT)
|
|
*/
|
|
#define GPT_CON 0x00010000 /* One shot: 0, Continuous: 1 */
|
|
#define GPT_VAL 0x0000ffff /* Timer Value */
|
|
|
|
/*
|
|
** DC21140 General Purpose Register (DE4X5_GEP) (hardware dependent bits)
|
|
*/
|
|
/* Valid ONLY for DE500 hardware */
|
|
#define GEP_LNP 0x00000080 /* Link Pass (input) */
|
|
#define GEP_SLNK 0x00000040 /* SYM LINK (input) */
|
|
#define GEP_SDET 0x00000020 /* Signal Detect (input) */
|
|
#define GEP_HRST 0x00000010 /* Hard RESET (to PHY) (output) */
|
|
#define GEP_FDXD 0x00000008 /* Full Duplex Disable (output) */
|
|
#define GEP_PHYL 0x00000004 /* PHY Loopback (output) */
|
|
#define GEP_FLED 0x00000002 /* Force Activity LED on (output) */
|
|
#define GEP_MODE 0x00000001 /* 0: 10Mb/s, 1: 100Mb/s */
|
|
#define GEP_INIT 0x0000011f /* Setup inputs (0) and outputs (1) */
|
|
#define GEP_CTRL 0x00000100 /* GEP control bit */
|
|
|
|
/*
|
|
** SIA Register Defaults
|
|
*/
|
|
#define CSR13 0x00000001
|
|
#define CSR14 0x0003ff7f /* Autonegotiation disabled */
|
|
#define CSR15 0x00000008
|
|
|
|
/*
|
|
** SIA Status Register (DE4X5_SISR)
|
|
*/
|
|
#define SISR_LPC 0xffff0000 /* Link Partner's Code Word */
|
|
#define SISR_LPN 0x00008000 /* Link Partner Negotiable */
|
|
#define SISR_ANS 0x00007000 /* Auto Negotiation Arbitration State */
|
|
#define SISR_NSN 0x00000800 /* Non Stable NLPs Detected (DC21041) */
|
|
#define SISR_TRF 0x00000800 /* Transmit Remote Fault */
|
|
#define SISR_NSND 0x00000400 /* Non Stable NLPs Detected (DC21142) */
|
|
#define SISR_ANR_FDS 0x00000400 /* Auto Negotiate Restart/Full Duplex Sel.*/
|
|
#define SISR_TRA 0x00000200 /* 10BASE-T Receive Port Activity */
|
|
#define SISR_NRA 0x00000200 /* Non Selected Port Receive Activity */
|
|
#define SISR_ARA 0x00000100 /* AUI Receive Port Activity */
|
|
#define SISR_SRA 0x00000100 /* Selected Port Receive Activity */
|
|
#define SISR_DAO 0x00000080 /* PLL All One */
|
|
#define SISR_DAZ 0x00000040 /* PLL All Zero */
|
|
#define SISR_DSP 0x00000020 /* PLL Self-Test Pass */
|
|
#define SISR_DSD 0x00000010 /* PLL Self-Test Done */
|
|
#define SISR_APS 0x00000008 /* Auto Polarity State */
|
|
#define SISR_LKF 0x00000004 /* Link Fail Status */
|
|
#define SISR_LS10 0x00000004 /* 10Mb/s Link Fail Status */
|
|
#define SISR_NCR 0x00000002 /* Network Connection Error */
|
|
#define SISR_LS100 0x00000002 /* 100Mb/s Link Fail Status */
|
|
#define SISR_PAUI 0x00000001 /* AUI_TP Indication */
|
|
#define SISR_MRA 0x00000001 /* MII Receive Port Activity */
|
|
|
|
#define ANS_NDIS 0x00000000 /* Nway disable */
|
|
#define ANS_TDIS 0x00001000 /* Transmit Disable */
|
|
#define ANS_ADET 0x00002000 /* Ability Detect */
|
|
#define ANS_ACK 0x00003000 /* Acknowledge */
|
|
#define ANS_CACK 0x00004000 /* Complete Acknowledge */
|
|
#define ANS_NWOK 0x00005000 /* Nway OK - FLP Link Good */
|
|
#define ANS_LCHK 0x00006000 /* Link Check */
|
|
|
|
#define SISR_RST 0x00000301 /* CSR12 reset */
|
|
#define SISR_ANR 0x00001301 /* Autonegotiation restart */
|
|
|
|
/*
|
|
** SIA Connectivity Register (DE4X5_SICR)
|
|
*/
|
|
#define SICR_SDM 0xffff0000 /* SIA Diagnostics Mode */
|
|
#define SICR_OE57 0x00008000 /* Output Enable 5 6 7 */
|
|
#define SICR_OE24 0x00004000 /* Output Enable 2 4 */
|
|
#define SICR_OE13 0x00002000 /* Output Enable 1 3 */
|
|
#define SICR_IE 0x00001000 /* Input Enable */
|
|
#define SICR_EXT 0x00000000 /* SIA MUX Select External SIA Mode */
|
|
#define SICR_D_SIA 0x00000400 /* SIA MUX Select Diagnostics - SIA Sigs */
|
|
#define SICR_DPLL 0x00000800 /* SIA MUX Select Diagnostics - DPLL Sigs*/
|
|
#define SICR_APLL 0x00000a00 /* SIA MUX Select Diagnostics - DPLL Sigs*/
|
|
#define SICR_D_RxM 0x00000c00 /* SIA MUX Select Diagnostics - RxM Sigs */
|
|
#define SICR_M_RxM 0x00000d00 /* SIA MUX Select Diagnostics - RxM Sigs */
|
|
#define SICR_LNKT 0x00000e00 /* SIA MUX Select Diagnostics - Link Test*/
|
|
#define SICR_SEL 0x00000f00 /* SIA MUX Select AUI or TP with LEDs */
|
|
#define SICR_ASE 0x00000080 /* APLL Start Enable*/
|
|
#define SICR_SIM 0x00000040 /* Serial Interface Input Multiplexer */
|
|
#define SICR_ENI 0x00000020 /* Encoder Input Multiplexer */
|
|
#define SICR_EDP 0x00000010 /* SIA PLL External Input Enable */
|
|
#define SICR_AUI 0x00000008 /* 10Base-T (0) or AUI (1) */
|
|
#define SICR_CAC 0x00000004 /* CSR Auto Configuration */
|
|
#define SICR_PS 0x00000002 /* Pin AUI/TP Selection */
|
|
#define SICR_SRL 0x00000001 /* SIA Reset */
|
|
#define SIA_RESET 0x00000000 /* SIA Reset Value */
|
|
|
|
/*
|
|
** SIA Transmit and Receive Register (DE4X5_STRR)
|
|
*/
|
|
#define STRR_TAS 0x00008000 /* 10Base-T/AUI Autosensing Enable */
|
|
#define STRR_SPP 0x00004000 /* Set Polarity Plus */
|
|
#define STRR_APE 0x00002000 /* Auto Polarity Enable */
|
|
#define STRR_LTE 0x00001000 /* Link Test Enable */
|
|
#define STRR_SQE 0x00000800 /* Signal Quality Enable */
|
|
#define STRR_CLD 0x00000400 /* Collision Detect Enable */
|
|
#define STRR_CSQ 0x00000200 /* Collision Squelch Enable */
|
|
#define STRR_RSQ 0x00000100 /* Receive Squelch Enable */
|
|
#define STRR_ANE 0x00000080 /* Auto Negotiate Enable */
|
|
#define STRR_HDE 0x00000040 /* Half Duplex Enable */
|
|
#define STRR_CPEN 0x00000030 /* Compensation Enable */
|
|
#define STRR_LSE 0x00000008 /* Link Pulse Send Enable */
|
|
#define STRR_DREN 0x00000004 /* Driver Enable */
|
|
#define STRR_LBK 0x00000002 /* Loopback Enable */
|
|
#define STRR_ECEN 0x00000001 /* Encoder Enable */
|
|
#define STRR_RESET 0xffffffff /* Reset value for STRR */
|
|
|
|
/*
|
|
** SIA General Register (DE4X5_SIGR)
|
|
*/
|
|
#define SIGR_RMI 0x40000000 /* Receive Match Interrupt */
|
|
#define SIGR_GI1 0x20000000 /* General Port Interrupt 1 */
|
|
#define SIGR_GI0 0x10000000 /* General Port Interrupt 0 */
|
|
#define SIGR_CWE 0x08000000 /* Control Write Enable */
|
|
#define SIGR_RME 0x04000000 /* Receive Match Enable */
|
|
#define SIGR_GEI1 0x02000000 /* GEP Interrupt Enable on Port 1 */
|
|
#define SIGR_GEI0 0x01000000 /* GEP Interrupt Enable on Port 0 */
|
|
#define SIGR_LGS3 0x00800000 /* LED/GEP3 Select */
|
|
#define SIGR_LGS2 0x00400000 /* LED/GEP2 Select */
|
|
#define SIGR_LGS1 0x00200000 /* LED/GEP1 Select */
|
|
#define SIGR_LGS0 0x00100000 /* LED/GEP0 Select */
|
|
#define SIGR_MD 0x000f0000 /* General Purpose Mode and Data */
|
|
#define SIGR_LV2 0x00008000 /* General Purpose LED2 value */
|
|
#define SIGR_LE2 0x00004000 /* General Purpose LED2 enable */
|
|
#define SIGR_FRL 0x00002000 /* Force Receiver Low */
|
|
#define SIGR_DPST 0x00001000 /* PLL Self Test Start */
|
|
#define SIGR_LSD 0x00000800 /* LED Stretch Disable */
|
|
#define SIGR_FLF 0x00000400 /* Force Link Fail */
|
|
#define SIGR_FUSQ 0x00000200 /* Force Unsquelch */
|
|
#define SIGR_TSCK 0x00000100 /* Test Clock */
|
|
#define SIGR_LV1 0x00000080 /* General Purpose LED1 value */
|
|
#define SIGR_LE1 0x00000040 /* General Purpose LED1 enable */
|
|
#define SIGR_RWR 0x00000020 /* Receive Watchdog Release */
|
|
#define SIGR_RWD 0x00000010 /* Receive Watchdog Disable */
|
|
#define SIGR_ABM 0x00000008 /* BNC: 0, AUI:1 */
|
|
#define SIGR_JCK 0x00000004 /* Jabber Clock */
|
|
#define SIGR_HUJ 0x00000002 /* Host Unjab */
|
|
#define SIGR_JBD 0x00000001 /* Jabber Disable */
|
|
#define SIGR_RESET 0xffff0000 /* Reset value for SIGR */
|
|
|
|
/*
|
|
** Receive Descriptor Bit Summary
|
|
*/
|
|
#define R_OWN 0x80000000 /* Own Bit */
|
|
#define RD_FF 0x40000000 /* Filtering Fail */
|
|
#define RD_FL 0x3fff0000 /* Frame Length */
|
|
#define RD_ES 0x00008000 /* Error Summary */
|
|
#define RD_LE 0x00004000 /* Length Error */
|
|
#define RD_DT 0x00003000 /* Data Type */
|
|
#define RD_RF 0x00000800 /* Runt Frame */
|
|
#define RD_MF 0x00000400 /* Multicast Frame */
|
|
#define RD_FS 0x00000200 /* First Descriptor */
|
|
#define RD_LS 0x00000100 /* Last Descriptor */
|
|
#define RD_TL 0x00000080 /* Frame Too Long */
|
|
#define RD_CS 0x00000040 /* Collision Seen */
|
|
#define RD_FT 0x00000020 /* Frame Type */
|
|
#define RD_RJ 0x00000010 /* Receive Watchdog */
|
|
#define RD_RE 0x00000008 /* Report on MII Error */
|
|
#define RD_DB 0x00000004 /* Dribbling Bit */
|
|
#define RD_CE 0x00000002 /* CRC Error */
|
|
#define RD_OF 0x00000001 /* Overflow */
|
|
|
|
#define RD_RER 0x02000000 /* Receive End Of Ring */
|
|
#define RD_RCH 0x01000000 /* Second Address Chained */
|
|
#define RD_RBS2 0x003ff800 /* Buffer 2 Size */
|
|
#define RD_RBS1 0x000007ff /* Buffer 1 Size */
|
|
|
|
/*
|
|
** Transmit Descriptor Bit Summary
|
|
*/
|
|
#define T_OWN 0x80000000 /* Own Bit */
|
|
#define TD_ES 0x00008000 /* Error Summary */
|
|
#define TD_TO 0x00004000 /* Transmit Jabber Time-Out */
|
|
#define TD_LO 0x00000800 /* Loss Of Carrier */
|
|
#define TD_NC 0x00000400 /* No Carrier */
|
|
#define TD_LC 0x00000200 /* Late Collision */
|
|
#define TD_EC 0x00000100 /* Excessive Collisions */
|
|
#define TD_HF 0x00000080 /* Heartbeat Fail */
|
|
#define TD_CC 0x00000078 /* Collision Counter */
|
|
#define TD_LF 0x00000004 /* Link Fail */
|
|
#define TD_UF 0x00000002 /* Underflow Error */
|
|
#define TD_DE 0x00000001 /* Deferred */
|
|
|
|
#define TD_IC 0x80000000 /* Interrupt On Completion */
|
|
#define TD_LS 0x40000000 /* Last Segment */
|
|
#define TD_FS 0x20000000 /* First Segment */
|
|
#define TD_FT1 0x10000000 /* Filtering Type */
|
|
#define TD_SET 0x08000000 /* Setup Packet */
|
|
#define TD_AC 0x04000000 /* Add CRC Disable */
|
|
#define TD_TER 0x02000000 /* Transmit End Of Ring */
|
|
#define TD_TCH 0x01000000 /* Second Address Chained */
|
|
#define TD_DPD 0x00800000 /* Disabled Padding */
|
|
#define TD_FT0 0x00400000 /* Filtering Type */
|
|
#define TD_TBS2 0x003ff800 /* Buffer 2 Size */
|
|
#define TD_TBS1 0x000007ff /* Buffer 1 Size */
|
|
|
|
#define PERFECT_F 0x00000000
|
|
#define HASH_F TD_FT0
|
|
#define INVERSE_F TD_FT1
|
|
#define HASH_O_F (TD_FT1 | TD_F0)
|
|
|
|
/*
|
|
** Media / mode state machine definitions
|
|
** User selectable:
|
|
*/
|
|
#define TP 0x0040 /* 10Base-T (now equiv to _10Mb) */
|
|
#define TP_NW 0x0002 /* 10Base-T with Nway */
|
|
#define BNC 0x0004 /* Thinwire */
|
|
#define AUI 0x0008 /* Thickwire */
|
|
#define BNC_AUI 0x0010 /* BNC/AUI on DC21040 indistinguishable */
|
|
#define _10Mb 0x0040 /* 10Mb/s Ethernet */
|
|
#define _100Mb 0x0080 /* 100Mb/s Ethernet */
|
|
#define AUTO 0x4000 /* Auto sense the media or speed */
|
|
|
|
/*
|
|
** Internal states
|
|
*/
|
|
#define NC 0x0000 /* No Connection */
|
|
#define ANS 0x0020 /* Intermediate AutoNegotiation State */
|
|
#define SPD_DET 0x0100 /* Parallel speed detection */
|
|
#define INIT 0x0200 /* Initial state */
|
|
#define EXT_SIA 0x0400 /* External SIA for motherboard chip */
|
|
#define ANS_SUSPECT 0x0802 /* Suspect the ANS (TP) port is down */
|
|
#define TP_SUSPECT 0x0803 /* Suspect the TP port is down */
|
|
#define BNC_AUI_SUSPECT 0x0804 /* Suspect the BNC or AUI port is down */
|
|
#define EXT_SIA_SUSPECT 0x0805 /* Suspect the EXT SIA port is down */
|
|
#define BNC_SUSPECT 0x0806 /* Suspect the BNC port is down */
|
|
#define AUI_SUSPECT 0x0807 /* Suspect the AUI port is down */
|
|
#define MII 0x1000 /* MII on the 21143 */
|
|
|
|
#define TIMER_CB 0x80000000 /* Timer callback detection */
|
|
|
|
/*
|
|
** DE4X5 DEBUG Options
|
|
*/
|
|
#define DEBUG_NONE 0x0000 /* No DEBUG messages */
|
|
#define DEBUG_VERSION 0x0001 /* Print version message */
|
|
#define DEBUG_MEDIA 0x0002 /* Print media messages */
|
|
#define DEBUG_TX 0x0004 /* Print TX (queue_pkt) messages */
|
|
#define DEBUG_RX 0x0008 /* Print RX (de4x5_rx) messages */
|
|
#define DEBUG_SROM 0x0010 /* Print SROM messages */
|
|
#define DEBUG_MII 0x0020 /* Print MII messages */
|
|
#define DEBUG_OPEN 0x0040 /* Print de4x5_open() messages */
|
|
#define DEBUG_CLOSE 0x0080 /* Print de4x5_close() messages */
|
|
#define DEBUG_PCICFG 0x0100
|
|
#define DEBUG_ALL 0x01ff
|
|
|
|
/*
|
|
** Miscellaneous
|
|
*/
|
|
#define PCI 0
|
|
#define EISA 1
|
|
|
|
#define HASH_TABLE_LEN 512 /* Bits */
|
|
#define HASH_BITS 0x01ff /* 9 LS bits */
|
|
|
|
#define SETUP_FRAME_LEN 192 /* Bytes */
|
|
#define IMPERF_PA_OFFSET 156 /* Bytes */
|
|
|
|
#define POLL_DEMAND 1
|
|
|
|
#define LOST_MEDIA_THRESHOLD 3
|
|
|
|
#define MASK_INTERRUPTS 1
|
|
#define UNMASK_INTERRUPTS 0
|
|
|
|
#define DE4X5_STRLEN 8
|
|
|
|
#define DE4X5_INIT 0 /* Initialisation time */
|
|
#define DE4X5_RUN 1 /* Run time */
|
|
|
|
#define DE4X5_SAVE_STATE 0
|
|
#define DE4X5_RESTORE_STATE 1
|
|
|
|
/*
|
|
** Address Filtering Modes
|
|
*/
|
|
#define PERFECT 0 /* 16 perfect physical addresses */
|
|
#define HASH_PERF 1 /* 1 perfect, 512 multicast addresses */
|
|
#define PERFECT_REJ 2 /* Reject 16 perfect physical addresses */
|
|
#define ALL_HASH 3 /* Hashes all physical & multicast addrs */
|
|
|
|
#define ALL 0 /* Clear out all the setup frame */
|
|
#define PHYS_ADDR_ONLY 1 /* Update the physical address only */
|
|
|
|
/*
|
|
** Booleans
|
|
*/
|
|
#define NO 0
|
|
#define FALSE 0
|
|
|
|
#define YES ~0
|
|
#define TRUE ~0
|
|
|
|
/*
|
|
** Adapter state
|
|
*/
|
|
#define INITIALISED 0 /* After h/w initialised and mem alloc'd */
|
|
#define CLOSED 1 /* Ready for opening */
|
|
#define OPEN 2 /* Running */
|
|
|
|
/*
|
|
** Various wait times
|
|
*/
|
|
#define PDET_LINK_WAIT 1200 /* msecs to wait for link detect bits */
|
|
#define ANS_FINISH_WAIT 1000 /* msecs to wait for link detect bits */
|
|
|
|
/*
|
|
** IEEE OUIs for various PHY vendor/chip combos - Reg 2 values only. Since
|
|
** the vendors seem split 50-50 on how to calculate the OUI register values
|
|
** anyway, just reading Reg2 seems reasonable for now [see de4x5_get_oui()].
|
|
*/
|
|
#define NATIONAL_TX 0x2000
|
|
#define BROADCOM_T4 0x03e0
|
|
#define SEEQ_T4 0x0016
|
|
#define CYPRESS_T4 0x0014
|
|
|
|
/*
|
|
** Speed Selection stuff
|
|
*/
|
|
#define SET_10Mb {\
|
|
if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
|
|
omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\
|
|
if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\
|
|
mii_wr(MII_CR_10|(lp->fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
|
|
}\
|
|
omr |= ((lp->fdx ? OMR_FDX : 0) | OMR_TTM);\
|
|
outl(omr, DE4X5_OMR);\
|
|
if (!lp->useSROM) lp->cache.gep = 0;\
|
|
} else if (lp->useSROM && !lp->useMII) {\
|
|
omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
|
|
omr |= (lp->fdx ? OMR_FDX : 0);\
|
|
outl(omr | (lp->infoblock_csr6 & ~(OMR_SCR | OMR_HBD)), DE4X5_OMR);\
|
|
} else {\
|
|
omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
|
|
omr |= (lp->fdx ? OMR_FDX : 0);\
|
|
outl(omr | OMR_SDP | OMR_TTM, DE4X5_OMR);\
|
|
lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD);\
|
|
gep_wr(lp->cache.gep, dev);\
|
|
}\
|
|
}
|
|
|
|
#define SET_100Mb {\
|
|
if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
|
|
int fdx=0;\
|
|
if (lp->phy[lp->active].id == NATIONAL_TX) {\
|
|
mii_wr(mii_rd(0x18, lp->phy[lp->active].addr, DE4X5_MII) & ~0x2000,\
|
|
0x18, lp->phy[lp->active].addr, DE4X5_MII);\
|
|
}\
|
|
omr = inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX);\
|
|
sr = mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII);\
|
|
if (!(sr & MII_ANA_T4AM) && lp->fdx) fdx=1;\
|
|
if ((lp->tmp != MII_SR_ASSC) || (lp->autosense != AUTO)) {\
|
|
mii_wr(MII_CR_100|(fdx?MII_CR_FDM:0), MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
|
|
}\
|
|
if (fdx) omr |= OMR_FDX;\
|
|
outl(omr, DE4X5_OMR);\
|
|
if (!lp->useSROM) lp->cache.gep = 0;\
|
|
} else if (lp->useSROM && !lp->useMII) {\
|
|
omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
|
|
omr |= (lp->fdx ? OMR_FDX : 0);\
|
|
outl(omr | lp->infoblock_csr6, DE4X5_OMR);\
|
|
} else {\
|
|
omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
|
|
omr |= (lp->fdx ? OMR_FDX : 0);\
|
|
outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS | OMR_SCR, DE4X5_OMR);\
|
|
lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD) | GEP_MODE;\
|
|
gep_wr(lp->cache.gep, dev);\
|
|
}\
|
|
}
|
|
|
|
/* FIX ME so I don't jam 10Mb networks */
|
|
#define SET_100Mb_PDET {\
|
|
if ((lp->phy[lp->active].id) && (!lp->useSROM || lp->useMII)) {\
|
|
mii_wr(MII_CR_100|MII_CR_ASSE, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);\
|
|
omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
|
|
outl(omr, DE4X5_OMR);\
|
|
} else if (lp->useSROM && !lp->useMII) {\
|
|
omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
|
|
outl(omr, DE4X5_OMR);\
|
|
} else {\
|
|
omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
|
|
outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS, DE4X5_OMR);\
|
|
lp->cache.gep = (GEP_FDXD | GEP_MODE);\
|
|
gep_wr(lp->cache.gep, dev);\
|
|
}\
|
|
}
|
|
|
|
/*
|
|
** Include the IOCTL stuff
|
|
*/
|
|
#include <linux/sockios.h>
|
|
|
|
#define DE4X5IOCTL SIOCDEVPRIVATE
|
|
|
|
struct de4x5_ioctl {
|
|
unsigned short cmd; /* Command to run */
|
|
unsigned short len; /* Length of the data buffer */
|
|
unsigned char __user *data; /* Pointer to the data buffer */
|
|
};
|
|
|
|
/*
|
|
** Recognised commands for the driver
|
|
*/
|
|
#define DE4X5_GET_HWADDR 0x01 /* Get the hardware address */
|
|
#define DE4X5_SET_HWADDR 0x02 /* Set the hardware address */
|
|
#define DE4X5_SET_PROM 0x03 /* Set Promiscuous Mode */
|
|
#define DE4X5_CLR_PROM 0x04 /* Clear Promiscuous Mode */
|
|
#define DE4X5_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */
|
|
#define DE4X5_GET_MCA 0x06 /* Get a multicast address */
|
|
#define DE4X5_SET_MCA 0x07 /* Set a multicast address */
|
|
#define DE4X5_CLR_MCA 0x08 /* Clear a multicast address */
|
|
#define DE4X5_MCA_EN 0x09 /* Enable a multicast address group */
|
|
#define DE4X5_GET_STATS 0x0a /* Get the driver statistics */
|
|
#define DE4X5_CLR_STATS 0x0b /* Zero out the driver statistics */
|
|
#define DE4X5_GET_OMR 0x0c /* Get the OMR Register contents */
|
|
#define DE4X5_SET_OMR 0x0d /* Set the OMR Register contents */
|
|
#define DE4X5_GET_REG 0x0e /* Get the DE4X5 Registers */
|
|
|
|
#define MOTO_SROM_BUG ((lp->active == 8) && (((le32_to_cpu(get_unaligned(((s32 *)dev->dev_addr))))&0x00ffffff)==0x3e0008))
|