mirror of https://gitee.com/openkylin/linux.git
610 lines
17 KiB
C
610 lines
17 KiB
C
/*
|
|
* Support PCI/PCIe on PowerNV platforms
|
|
*
|
|
* Currently supports only P5IOC2
|
|
*
|
|
* Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/io.h>
|
|
#include <linux/msi.h>
|
|
|
|
#include <asm/sections.h>
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/ppc-pci.h>
|
|
#include <asm/opal.h>
|
|
#include <asm/iommu.h>
|
|
#include <asm/tce.h>
|
|
#include <asm/abs_addr.h>
|
|
#include <asm/firmware.h>
|
|
|
|
#include "powernv.h"
|
|
#include "pci.h"
|
|
|
|
/* Delay in usec */
|
|
#define PCI_RESET_DELAY_US 3000000
|
|
|
|
#define cfg_dbg(fmt...) do { } while(0)
|
|
//#define cfg_dbg(fmt...) printk(fmt)
|
|
|
|
#ifdef CONFIG_PCI_MSI
|
|
static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
|
|
return (phb && phb->msi_map) ? 0 : -ENODEV;
|
|
}
|
|
|
|
static unsigned int pnv_get_one_msi(struct pnv_phb *phb)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int id, rc;
|
|
|
|
spin_lock_irqsave(&phb->lock, flags);
|
|
|
|
id = find_next_zero_bit(phb->msi_map, phb->msi_count, phb->msi_next);
|
|
if (id >= phb->msi_count && phb->msi_next)
|
|
id = find_next_zero_bit(phb->msi_map, phb->msi_count, 0);
|
|
if (id >= phb->msi_count) {
|
|
rc = 0;
|
|
goto out;
|
|
}
|
|
__set_bit(id, phb->msi_map);
|
|
rc = id + phb->msi_base;
|
|
out:
|
|
spin_unlock_irqrestore(&phb->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
static void pnv_put_msi(struct pnv_phb *phb, unsigned int hwirq)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int id;
|
|
|
|
if (WARN_ON(hwirq < phb->msi_base ||
|
|
hwirq >= (phb->msi_base + phb->msi_count)))
|
|
return;
|
|
id = hwirq - phb->msi_base;
|
|
|
|
spin_lock_irqsave(&phb->lock, flags);
|
|
__clear_bit(id, phb->msi_map);
|
|
spin_unlock_irqrestore(&phb->lock, flags);
|
|
}
|
|
|
|
static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
struct msi_desc *entry;
|
|
struct msi_msg msg;
|
|
unsigned int hwirq, virq;
|
|
int rc;
|
|
|
|
if (WARN_ON(!phb))
|
|
return -ENODEV;
|
|
|
|
list_for_each_entry(entry, &pdev->msi_list, list) {
|
|
if (!entry->msi_attrib.is_64 && !phb->msi32_support) {
|
|
pr_warn("%s: Supports only 64-bit MSIs\n",
|
|
pci_name(pdev));
|
|
return -ENXIO;
|
|
}
|
|
hwirq = pnv_get_one_msi(phb);
|
|
if (!hwirq) {
|
|
pr_warn("%s: Failed to find a free MSI\n",
|
|
pci_name(pdev));
|
|
return -ENOSPC;
|
|
}
|
|
virq = irq_create_mapping(NULL, hwirq);
|
|
if (virq == NO_IRQ) {
|
|
pr_warn("%s: Failed to map MSI to linux irq\n",
|
|
pci_name(pdev));
|
|
pnv_put_msi(phb, hwirq);
|
|
return -ENOMEM;
|
|
}
|
|
rc = phb->msi_setup(phb, pdev, hwirq, entry->msi_attrib.is_64,
|
|
&msg);
|
|
if (rc) {
|
|
pr_warn("%s: Failed to setup MSI\n", pci_name(pdev));
|
|
irq_dispose_mapping(virq);
|
|
pnv_put_msi(phb, hwirq);
|
|
return rc;
|
|
}
|
|
irq_set_msi_desc(virq, entry);
|
|
write_msi_msg(virq, &msg);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void pnv_teardown_msi_irqs(struct pci_dev *pdev)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
struct msi_desc *entry;
|
|
|
|
if (WARN_ON(!phb))
|
|
return;
|
|
|
|
list_for_each_entry(entry, &pdev->msi_list, list) {
|
|
if (entry->irq == NO_IRQ)
|
|
continue;
|
|
irq_set_msi_desc(entry->irq, NULL);
|
|
pnv_put_msi(phb, virq_to_hw(entry->irq));
|
|
irq_dispose_mapping(entry->irq);
|
|
}
|
|
}
|
|
#endif /* CONFIG_PCI_MSI */
|
|
|
|
static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb)
|
|
{
|
|
struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc;
|
|
int i;
|
|
|
|
pr_info("PHB %d diagnostic data:\n", phb->hose->global_number);
|
|
|
|
pr_info(" brdgCtl = 0x%08x\n", data->brdgCtl);
|
|
|
|
pr_info(" portStatusReg = 0x%08x\n", data->portStatusReg);
|
|
pr_info(" rootCmplxStatus = 0x%08x\n", data->rootCmplxStatus);
|
|
pr_info(" busAgentStatus = 0x%08x\n", data->busAgentStatus);
|
|
|
|
pr_info(" deviceStatus = 0x%08x\n", data->deviceStatus);
|
|
pr_info(" slotStatus = 0x%08x\n", data->slotStatus);
|
|
pr_info(" linkStatus = 0x%08x\n", data->linkStatus);
|
|
pr_info(" devCmdStatus = 0x%08x\n", data->devCmdStatus);
|
|
pr_info(" devSecStatus = 0x%08x\n", data->devSecStatus);
|
|
|
|
pr_info(" rootErrorStatus = 0x%08x\n", data->rootErrorStatus);
|
|
pr_info(" uncorrErrorStatus = 0x%08x\n", data->uncorrErrorStatus);
|
|
pr_info(" corrErrorStatus = 0x%08x\n", data->corrErrorStatus);
|
|
pr_info(" tlpHdr1 = 0x%08x\n", data->tlpHdr1);
|
|
pr_info(" tlpHdr2 = 0x%08x\n", data->tlpHdr2);
|
|
pr_info(" tlpHdr3 = 0x%08x\n", data->tlpHdr3);
|
|
pr_info(" tlpHdr4 = 0x%08x\n", data->tlpHdr4);
|
|
pr_info(" sourceId = 0x%08x\n", data->sourceId);
|
|
|
|
pr_info(" errorClass = 0x%016llx\n", data->errorClass);
|
|
pr_info(" correlator = 0x%016llx\n", data->correlator);
|
|
|
|
pr_info(" p7iocPlssr = 0x%016llx\n", data->p7iocPlssr);
|
|
pr_info(" p7iocCsr = 0x%016llx\n", data->p7iocCsr);
|
|
pr_info(" lemFir = 0x%016llx\n", data->lemFir);
|
|
pr_info(" lemErrorMask = 0x%016llx\n", data->lemErrorMask);
|
|
pr_info(" lemWOF = 0x%016llx\n", data->lemWOF);
|
|
pr_info(" phbErrorStatus = 0x%016llx\n", data->phbErrorStatus);
|
|
pr_info(" phbFirstErrorStatus = 0x%016llx\n", data->phbFirstErrorStatus);
|
|
pr_info(" phbErrorLog0 = 0x%016llx\n", data->phbErrorLog0);
|
|
pr_info(" phbErrorLog1 = 0x%016llx\n", data->phbErrorLog1);
|
|
pr_info(" mmioErrorStatus = 0x%016llx\n", data->mmioErrorStatus);
|
|
pr_info(" mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus);
|
|
pr_info(" mmioErrorLog0 = 0x%016llx\n", data->mmioErrorLog0);
|
|
pr_info(" mmioErrorLog1 = 0x%016llx\n", data->mmioErrorLog1);
|
|
pr_info(" dma0ErrorStatus = 0x%016llx\n", data->dma0ErrorStatus);
|
|
pr_info(" dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus);
|
|
pr_info(" dma0ErrorLog0 = 0x%016llx\n", data->dma0ErrorLog0);
|
|
pr_info(" dma0ErrorLog1 = 0x%016llx\n", data->dma0ErrorLog1);
|
|
pr_info(" dma1ErrorStatus = 0x%016llx\n", data->dma1ErrorStatus);
|
|
pr_info(" dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus);
|
|
pr_info(" dma1ErrorLog0 = 0x%016llx\n", data->dma1ErrorLog0);
|
|
pr_info(" dma1ErrorLog1 = 0x%016llx\n", data->dma1ErrorLog1);
|
|
|
|
for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
|
|
if ((data->pestA[i] >> 63) == 0 &&
|
|
(data->pestB[i] >> 63) == 0)
|
|
continue;
|
|
pr_info(" PE[%3d] PESTA = 0x%016llx\n", i, data->pestA[i]);
|
|
pr_info(" PESTB = 0x%016llx\n", data->pestB[i]);
|
|
}
|
|
}
|
|
|
|
static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb)
|
|
{
|
|
switch(phb->model) {
|
|
case PNV_PHB_MODEL_P7IOC:
|
|
pnv_pci_dump_p7ioc_diag_data(phb);
|
|
break;
|
|
default:
|
|
pr_warning("PCI %d: Can't decode this PHB diag data\n",
|
|
phb->hose->global_number);
|
|
}
|
|
}
|
|
|
|
static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no)
|
|
{
|
|
unsigned long flags, rc;
|
|
int has_diag;
|
|
|
|
spin_lock_irqsave(&phb->lock, flags);
|
|
|
|
rc = opal_pci_get_phb_diag_data(phb->opal_id, phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
|
|
has_diag = (rc == OPAL_SUCCESS);
|
|
|
|
rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
|
|
OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
|
|
if (rc) {
|
|
pr_warning("PCI %d: Failed to clear EEH freeze state"
|
|
" for PE#%d, err %ld\n",
|
|
phb->hose->global_number, pe_no, rc);
|
|
|
|
/* For now, let's only display the diag buffer when we fail to clear
|
|
* the EEH status. We'll do more sensible things later when we have
|
|
* proper EEH support. We need to make sure we don't pollute ourselves
|
|
* with the normal errors generated when probing empty slots
|
|
*/
|
|
if (has_diag)
|
|
pnv_pci_dump_phb_diag_data(phb);
|
|
else
|
|
pr_warning("PCI %d: No diag data available\n",
|
|
phb->hose->global_number);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&phb->lock, flags);
|
|
}
|
|
|
|
static void pnv_pci_config_check_eeh(struct pnv_phb *phb, struct pci_bus *bus,
|
|
u32 bdfn)
|
|
{
|
|
s64 rc;
|
|
u8 fstate;
|
|
u16 pcierr;
|
|
u32 pe_no;
|
|
|
|
/* Get PE# if we support IODA */
|
|
pe_no = phb->bdfn_to_pe ? phb->bdfn_to_pe(phb, bus, bdfn & 0xff) : 0;
|
|
|
|
/* Read freeze status */
|
|
rc = opal_pci_eeh_freeze_status(phb->opal_id, pe_no, &fstate, &pcierr,
|
|
NULL);
|
|
if (rc) {
|
|
pr_warning("PCI %d: Failed to read EEH status for PE#%d,"
|
|
" err %lld\n", phb->hose->global_number, pe_no, rc);
|
|
return;
|
|
}
|
|
cfg_dbg(" -> EEH check, bdfn=%04x PE%d fstate=%x\n",
|
|
bdfn, pe_no, fstate);
|
|
if (fstate != 0)
|
|
pnv_pci_handle_eeh_config(phb, pe_no);
|
|
}
|
|
|
|
static int pnv_pci_read_config(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
|
|
s64 rc;
|
|
|
|
if (hose == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
switch (size) {
|
|
case 1: {
|
|
u8 v8;
|
|
rc = opal_pci_config_read_byte(phb->opal_id, bdfn, where, &v8);
|
|
*val = (rc == OPAL_SUCCESS) ? v8 : 0xff;
|
|
break;
|
|
}
|
|
case 2: {
|
|
u16 v16;
|
|
rc = opal_pci_config_read_half_word(phb->opal_id, bdfn, where,
|
|
&v16);
|
|
*val = (rc == OPAL_SUCCESS) ? v16 : 0xffff;
|
|
break;
|
|
}
|
|
case 4: {
|
|
u32 v32;
|
|
rc = opal_pci_config_read_word(phb->opal_id, bdfn, where, &v32);
|
|
*val = (rc == OPAL_SUCCESS) ? v32 : 0xffffffff;
|
|
break;
|
|
}
|
|
default:
|
|
return PCIBIOS_FUNC_NOT_SUPPORTED;
|
|
}
|
|
cfg_dbg("pnv_pci_read_config bus: %x devfn: %x +%x/%x -> %08x\n",
|
|
bus->number, devfn, where, size, *val);
|
|
|
|
/* Check if the PHB got frozen due to an error (no response) */
|
|
pnv_pci_config_check_eeh(phb, bus, bdfn);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int pnv_pci_write_config(struct pci_bus *bus,
|
|
unsigned int devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
u32 bdfn = (((uint64_t)bus->number) << 8) | devfn;
|
|
|
|
if (hose == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
cfg_dbg("pnv_pci_write_config bus: %x devfn: %x +%x/%x -> %08x\n",
|
|
bus->number, devfn, where, size, val);
|
|
switch (size) {
|
|
case 1:
|
|
opal_pci_config_write_byte(phb->opal_id, bdfn, where, val);
|
|
break;
|
|
case 2:
|
|
opal_pci_config_write_half_word(phb->opal_id, bdfn, where, val);
|
|
break;
|
|
case 4:
|
|
opal_pci_config_write_word(phb->opal_id, bdfn, where, val);
|
|
break;
|
|
default:
|
|
return PCIBIOS_FUNC_NOT_SUPPORTED;
|
|
}
|
|
/* Check if the PHB got frozen due to an error (no response) */
|
|
pnv_pci_config_check_eeh(phb, bus, bdfn);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
struct pci_ops pnv_pci_ops = {
|
|
.read = pnv_pci_read_config,
|
|
.write = pnv_pci_write_config,
|
|
};
|
|
|
|
|
|
static void pnv_tce_invalidate(struct iommu_table *tbl,
|
|
u64 *startp, u64 *endp)
|
|
{
|
|
u64 __iomem *invalidate = (u64 __iomem *)tbl->it_index;
|
|
unsigned long start, end, inc;
|
|
|
|
start = __pa(startp);
|
|
end = __pa(endp);
|
|
|
|
|
|
/* BML uses this case for p6/p7/galaxy2: Shift addr and put in node */
|
|
if (tbl->it_busno) {
|
|
start <<= 12;
|
|
end <<= 12;
|
|
inc = 128 << 12;
|
|
start |= tbl->it_busno;
|
|
end |= tbl->it_busno;
|
|
}
|
|
/* p7ioc-style invalidation, 2 TCEs per write */
|
|
else if (tbl->it_type & TCE_PCI_SWINV_PAIR) {
|
|
start |= (1ull << 63);
|
|
end |= (1ull << 63);
|
|
inc = 16;
|
|
}
|
|
/* Default (older HW) */
|
|
else
|
|
inc = 128;
|
|
|
|
end |= inc - 1; /* round up end to be different than start */
|
|
|
|
mb(); /* Ensure above stores are visible */
|
|
while (start <= end) {
|
|
__raw_writeq(start, invalidate);
|
|
start += inc;
|
|
}
|
|
/* The iommu layer will do another mb() for us on build() and
|
|
* we don't care on free()
|
|
*/
|
|
}
|
|
|
|
|
|
static int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
|
|
unsigned long uaddr, enum dma_data_direction direction,
|
|
struct dma_attrs *attrs)
|
|
{
|
|
u64 proto_tce;
|
|
u64 *tcep, *tces;
|
|
u64 rpn;
|
|
|
|
proto_tce = TCE_PCI_READ; // Read allowed
|
|
|
|
if (direction != DMA_TO_DEVICE)
|
|
proto_tce |= TCE_PCI_WRITE;
|
|
|
|
tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
|
|
rpn = __pa(uaddr) >> TCE_SHIFT;
|
|
|
|
while (npages--)
|
|
*(tcep++) = proto_tce | (rpn++ << TCE_RPN_SHIFT);
|
|
|
|
/* Some implementations won't cache invalid TCEs and thus may not
|
|
* need that flush. We'll probably turn it_type into a bit mask
|
|
* of flags if that becomes the case
|
|
*/
|
|
if (tbl->it_type & TCE_PCI_SWINV_CREATE)
|
|
pnv_tce_invalidate(tbl, tces, tcep - 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
|
|
{
|
|
u64 *tcep, *tces;
|
|
|
|
tces = tcep = ((u64 *)tbl->it_base) + index - tbl->it_offset;
|
|
|
|
while (npages--)
|
|
*(tcep++) = 0;
|
|
|
|
if (tbl->it_type & TCE_PCI_SWINV_FREE)
|
|
pnv_tce_invalidate(tbl, tces, tcep - 1);
|
|
}
|
|
|
|
void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
|
|
void *tce_mem, u64 tce_size,
|
|
u64 dma_offset)
|
|
{
|
|
tbl->it_blocksize = 16;
|
|
tbl->it_base = (unsigned long)tce_mem;
|
|
tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT;
|
|
tbl->it_index = 0;
|
|
tbl->it_size = tce_size >> 3;
|
|
tbl->it_busno = 0;
|
|
tbl->it_type = TCE_PCI;
|
|
}
|
|
|
|
static struct iommu_table * __devinit
|
|
pnv_pci_setup_bml_iommu(struct pci_controller *hose)
|
|
{
|
|
struct iommu_table *tbl;
|
|
const __be64 *basep, *swinvp;
|
|
const __be32 *sizep;
|
|
|
|
basep = of_get_property(hose->dn, "linux,tce-base", NULL);
|
|
sizep = of_get_property(hose->dn, "linux,tce-size", NULL);
|
|
if (basep == NULL || sizep == NULL) {
|
|
pr_err("PCI: %s has missing tce entries !\n",
|
|
hose->dn->full_name);
|
|
return NULL;
|
|
}
|
|
tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, hose->node);
|
|
if (WARN_ON(!tbl))
|
|
return NULL;
|
|
pnv_pci_setup_iommu_table(tbl, __va(be64_to_cpup(basep)),
|
|
be32_to_cpup(sizep), 0);
|
|
iommu_init_table(tbl, hose->node);
|
|
|
|
/* Deal with SW invalidated TCEs when needed (BML way) */
|
|
swinvp = of_get_property(hose->dn, "linux,tce-sw-invalidate-info",
|
|
NULL);
|
|
if (swinvp) {
|
|
tbl->it_busno = swinvp[1];
|
|
tbl->it_index = (unsigned long)ioremap(swinvp[0], 8);
|
|
tbl->it_type = TCE_PCI_SWINV_CREATE | TCE_PCI_SWINV_FREE;
|
|
}
|
|
return tbl;
|
|
}
|
|
|
|
static void __devinit pnv_pci_dma_fallback_setup(struct pci_controller *hose,
|
|
struct pci_dev *pdev)
|
|
{
|
|
struct device_node *np = pci_bus_to_OF_node(hose->bus);
|
|
struct pci_dn *pdn;
|
|
|
|
if (np == NULL)
|
|
return;
|
|
pdn = PCI_DN(np);
|
|
if (!pdn->iommu_table)
|
|
pdn->iommu_table = pnv_pci_setup_bml_iommu(hose);
|
|
if (!pdn->iommu_table)
|
|
return;
|
|
set_iommu_table_base(&pdev->dev, pdn->iommu_table);
|
|
}
|
|
|
|
static void __devinit pnv_pci_dma_dev_setup(struct pci_dev *pdev)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
|
|
struct pnv_phb *phb = hose->private_data;
|
|
|
|
/* If we have no phb structure, try to setup a fallback based on
|
|
* the device-tree (RTAS PCI for example)
|
|
*/
|
|
if (phb && phb->dma_dev_setup)
|
|
phb->dma_dev_setup(phb, pdev);
|
|
else
|
|
pnv_pci_dma_fallback_setup(hose, pdev);
|
|
}
|
|
|
|
/* Fixup wrong class code in p7ioc root complex */
|
|
static void __devinit pnv_p7ioc_rc_quirk(struct pci_dev *dev)
|
|
{
|
|
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
|
|
}
|
|
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
|
|
|
|
static int pnv_pci_probe_mode(struct pci_bus *bus)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
const __be64 *tstamp;
|
|
u64 now, target;
|
|
|
|
|
|
/* We hijack this as a way to ensure we have waited long
|
|
* enough since the reset was lifted on the PCI bus
|
|
*/
|
|
if (bus != hose->bus)
|
|
return PCI_PROBE_NORMAL;
|
|
tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL);
|
|
if (!tstamp || !*tstamp)
|
|
return PCI_PROBE_NORMAL;
|
|
|
|
now = mftb() / tb_ticks_per_usec;
|
|
target = (be64_to_cpup(tstamp) / tb_ticks_per_usec)
|
|
+ PCI_RESET_DELAY_US;
|
|
|
|
pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n",
|
|
hose->global_number, target, now);
|
|
|
|
if (now < target)
|
|
msleep((target - now + 999) / 1000);
|
|
|
|
return PCI_PROBE_NORMAL;
|
|
}
|
|
|
|
void __init pnv_pci_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN);
|
|
|
|
/* OPAL absent, try POPAL first then RTAS detection of PHBs */
|
|
if (!firmware_has_feature(FW_FEATURE_OPAL)) {
|
|
#ifdef CONFIG_PPC_POWERNV_RTAS
|
|
init_pci_config_tokens();
|
|
find_and_init_phbs();
|
|
#endif /* CONFIG_PPC_POWERNV_RTAS */
|
|
}
|
|
/* OPAL is here, do our normal stuff */
|
|
else {
|
|
int found_ioda = 0;
|
|
|
|
/* Look for IODA IO-Hubs. We don't support mixing IODA
|
|
* and p5ioc2 due to the need to change some global
|
|
* probing flags
|
|
*/
|
|
for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
|
|
pnv_pci_init_ioda_hub(np);
|
|
found_ioda = 1;
|
|
}
|
|
|
|
/* Look for p5ioc2 IO-Hubs */
|
|
if (!found_ioda)
|
|
for_each_compatible_node(np, NULL, "ibm,p5ioc2")
|
|
pnv_pci_init_p5ioc2_hub(np);
|
|
}
|
|
|
|
/* Setup the linkage between OF nodes and PHBs */
|
|
pci_devs_phb_init();
|
|
|
|
/* Configure IOMMU DMA hooks */
|
|
ppc_md.pci_dma_dev_setup = pnv_pci_dma_dev_setup;
|
|
ppc_md.tce_build = pnv_tce_build;
|
|
ppc_md.tce_free = pnv_tce_free;
|
|
ppc_md.pci_probe_mode = pnv_pci_probe_mode;
|
|
set_pci_dma_ops(&dma_iommu_ops);
|
|
|
|
/* Configure MSIs */
|
|
#ifdef CONFIG_PCI_MSI
|
|
ppc_md.msi_check_device = pnv_msi_check_device;
|
|
ppc_md.setup_msi_irqs = pnv_setup_msi_irqs;
|
|
ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs;
|
|
#endif
|
|
}
|