mirror of https://gitee.com/openkylin/linux.git
2278 lines
71 KiB
C
2278 lines
71 KiB
C
/*
|
|
* Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T).
|
|
*
|
|
* Copyright (C) 2009 DiBcom (http://www.dibcom.fr/)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation, version 2.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/i2c.h>
|
|
#include "dvb_math.h"
|
|
|
|
#include "dvb_frontend.h"
|
|
|
|
#include "dib8000.h"
|
|
|
|
#define LAYER_ALL -1
|
|
#define LAYER_A 1
|
|
#define LAYER_B 2
|
|
#define LAYER_C 3
|
|
|
|
#define FE_CALLBACK_TIME_NEVER 0xffffffff
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
|
|
|
|
#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0)
|
|
|
|
enum frontend_tune_state {
|
|
CT_AGC_START = 20,
|
|
CT_AGC_STEP_0,
|
|
CT_AGC_STEP_1,
|
|
CT_AGC_STEP_2,
|
|
CT_AGC_STEP_3,
|
|
CT_AGC_STEP_4,
|
|
CT_AGC_STOP,
|
|
|
|
CT_DEMOD_START = 30,
|
|
};
|
|
|
|
#define FE_STATUS_TUNE_FAILED 0
|
|
|
|
struct i2c_device {
|
|
struct i2c_adapter *adap;
|
|
u8 addr;
|
|
};
|
|
|
|
struct dib8000_state {
|
|
struct dvb_frontend fe;
|
|
struct dib8000_config cfg;
|
|
|
|
struct i2c_device i2c;
|
|
|
|
struct dibx000_i2c_master i2c_master;
|
|
|
|
u16 wbd_ref;
|
|
|
|
u8 current_band;
|
|
u32 current_bandwidth;
|
|
struct dibx000_agc_config *current_agc;
|
|
u32 timf;
|
|
u32 timf_default;
|
|
|
|
u8 div_force_off:1;
|
|
u8 div_state:1;
|
|
u16 div_sync_wait;
|
|
|
|
u8 agc_state;
|
|
u8 differential_constellation;
|
|
u8 diversity_onoff;
|
|
|
|
s16 ber_monitored_layer;
|
|
u16 gpio_dir;
|
|
u16 gpio_val;
|
|
|
|
u16 revision;
|
|
u8 isdbt_cfg_loaded;
|
|
enum frontend_tune_state tune_state;
|
|
u32 status;
|
|
};
|
|
|
|
enum dib8000_power_mode {
|
|
DIB8000M_POWER_ALL = 0,
|
|
DIB8000M_POWER_INTERFACE_ONLY,
|
|
};
|
|
|
|
static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg)
|
|
{
|
|
u8 wb[2] = { reg >> 8, reg & 0xff };
|
|
u8 rb[2];
|
|
struct i2c_msg msg[2] = {
|
|
{.addr = i2c->addr >> 1,.flags = 0,.buf = wb,.len = 2},
|
|
{.addr = i2c->addr >> 1,.flags = I2C_M_RD,.buf = rb,.len = 2},
|
|
};
|
|
|
|
if (i2c_transfer(i2c->adap, msg, 2) != 2)
|
|
dprintk("i2c read error on %d", reg);
|
|
|
|
return (rb[0] << 8) | rb[1];
|
|
}
|
|
|
|
static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
|
|
{
|
|
return dib8000_i2c_read16(&state->i2c, reg);
|
|
}
|
|
|
|
static u32 dib8000_read32(struct dib8000_state *state, u16 reg)
|
|
{
|
|
u16 rw[2];
|
|
|
|
rw[0] = dib8000_read_word(state, reg + 0);
|
|
rw[1] = dib8000_read_word(state, reg + 1);
|
|
|
|
return ((rw[0] << 16) | (rw[1]));
|
|
}
|
|
|
|
static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val)
|
|
{
|
|
u8 b[4] = {
|
|
(reg >> 8) & 0xff, reg & 0xff,
|
|
(val >> 8) & 0xff, val & 0xff,
|
|
};
|
|
struct i2c_msg msg = {
|
|
.addr = i2c->addr >> 1,.flags = 0,.buf = b,.len = 4
|
|
};
|
|
return i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
|
|
}
|
|
|
|
static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val)
|
|
{
|
|
return dib8000_i2c_write16(&state->i2c, reg, val);
|
|
}
|
|
|
|
const int16_t coeff_2k_sb_1seg_dqpsk[8] = {
|
|
(769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c,
|
|
(920 << 5) | 0x09
|
|
};
|
|
|
|
const int16_t coeff_2k_sb_1seg[8] = {
|
|
(692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f
|
|
};
|
|
|
|
const int16_t coeff_2k_sb_3seg_0dqpsk_1dqpsk[8] = {
|
|
(832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11,
|
|
(-931 << 5) | 0x0f
|
|
};
|
|
|
|
const int16_t coeff_2k_sb_3seg_0dqpsk[8] = {
|
|
(622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e,
|
|
(982 << 5) | 0x0c
|
|
};
|
|
|
|
const int16_t coeff_2k_sb_3seg_1dqpsk[8] = {
|
|
(699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12,
|
|
(-720 << 5) | 0x0d
|
|
};
|
|
|
|
const int16_t coeff_2k_sb_3seg[8] = {
|
|
(664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e,
|
|
(-610 << 5) | 0x0a
|
|
};
|
|
|
|
const int16_t coeff_4k_sb_1seg_dqpsk[8] = {
|
|
(-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f,
|
|
(-922 << 5) | 0x0d
|
|
};
|
|
|
|
const int16_t coeff_4k_sb_1seg[8] = {
|
|
(638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d,
|
|
(-655 << 5) | 0x0a
|
|
};
|
|
|
|
const int16_t coeff_4k_sb_3seg_0dqpsk_1dqpsk[8] = {
|
|
(-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14,
|
|
(-958 << 5) | 0x13
|
|
};
|
|
|
|
const int16_t coeff_4k_sb_3seg_0dqpsk[8] = {
|
|
(-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12,
|
|
(-568 << 5) | 0x0f
|
|
};
|
|
|
|
const int16_t coeff_4k_sb_3seg_1dqpsk[8] = {
|
|
(-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14,
|
|
(-848 << 5) | 0x13
|
|
};
|
|
|
|
const int16_t coeff_4k_sb_3seg[8] = {
|
|
(612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12,
|
|
(-869 << 5) | 0x13
|
|
};
|
|
|
|
const int16_t coeff_8k_sb_1seg_dqpsk[8] = {
|
|
(-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13,
|
|
(-598 << 5) | 0x10
|
|
};
|
|
|
|
const int16_t coeff_8k_sb_1seg[8] = {
|
|
(673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f,
|
|
(585 << 5) | 0x0f
|
|
};
|
|
|
|
const int16_t coeff_8k_sb_3seg_0dqpsk_1dqpsk[8] = {
|
|
(863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18,
|
|
(0 << 5) | 0x14
|
|
};
|
|
|
|
const int16_t coeff_8k_sb_3seg_0dqpsk[8] = {
|
|
(-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15,
|
|
(-877 << 5) | 0x15
|
|
};
|
|
|
|
const int16_t coeff_8k_sb_3seg_1dqpsk[8] = {
|
|
(-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18,
|
|
(-921 << 5) | 0x14
|
|
};
|
|
|
|
const int16_t coeff_8k_sb_3seg[8] = {
|
|
(514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15,
|
|
(690 << 5) | 0x14
|
|
};
|
|
|
|
const int16_t ana_fe_coeff_3seg[24] = {
|
|
81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017
|
|
};
|
|
|
|
const int16_t ana_fe_coeff_1seg[24] = {
|
|
249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003
|
|
};
|
|
|
|
const int16_t ana_fe_coeff_13seg[24] = {
|
|
396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1
|
|
};
|
|
|
|
static u16 fft_to_mode(struct dib8000_state *state)
|
|
{
|
|
u16 mode;
|
|
switch (state->fe.dtv_property_cache.transmission_mode) {
|
|
case TRANSMISSION_MODE_2K:
|
|
mode = 1;
|
|
break;
|
|
case TRANSMISSION_MODE_4K:
|
|
mode = 2;
|
|
break;
|
|
default:
|
|
case TRANSMISSION_MODE_AUTO:
|
|
case TRANSMISSION_MODE_8K:
|
|
mode = 3;
|
|
break;
|
|
}
|
|
return mode;
|
|
}
|
|
|
|
static void dib8000_set_acquisition_mode(struct dib8000_state *state)
|
|
{
|
|
u16 nud = dib8000_read_word(state, 298);
|
|
nud |= (1 << 3) | (1 << 0);
|
|
dprintk("acquisition mode activated");
|
|
dib8000_write_word(state, 298, nud);
|
|
}
|
|
|
|
static int dib8000_set_output_mode(struct dib8000_state *state, int mode)
|
|
{
|
|
u16 outreg, fifo_threshold, smo_mode, sram = 0x0205; /* by default SDRAM deintlv is enabled */
|
|
|
|
outreg = 0;
|
|
fifo_threshold = 1792;
|
|
smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1);
|
|
|
|
dprintk("-I- Setting output mode for demod %p to %d", &state->fe, mode);
|
|
|
|
switch (mode) {
|
|
case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock
|
|
outreg = (1 << 10); /* 0x0400 */
|
|
break;
|
|
case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock
|
|
outreg = (1 << 10) | (1 << 6); /* 0x0440 */
|
|
break;
|
|
case OUTMODE_MPEG2_SERIAL: // STBs with serial input
|
|
outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */
|
|
break;
|
|
case OUTMODE_DIVERSITY:
|
|
if (state->cfg.hostbus_diversity) {
|
|
outreg = (1 << 10) | (4 << 6); /* 0x0500 */
|
|
sram &= 0xfdff;
|
|
} else
|
|
sram |= 0x0c00;
|
|
break;
|
|
case OUTMODE_MPEG2_FIFO: // e.g. USB feeding
|
|
smo_mode |= (3 << 1);
|
|
fifo_threshold = 512;
|
|
outreg = (1 << 10) | (5 << 6);
|
|
break;
|
|
case OUTMODE_HIGH_Z: // disable
|
|
outreg = 0;
|
|
break;
|
|
|
|
case OUTMODE_ANALOG_ADC:
|
|
outreg = (1 << 10) | (3 << 6);
|
|
dib8000_set_acquisition_mode(state);
|
|
break;
|
|
|
|
default:
|
|
dprintk("Unhandled output_mode passed to be set for demod %p", &state->fe);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (state->cfg.output_mpeg2_in_188_bytes)
|
|
smo_mode |= (1 << 5);
|
|
|
|
dib8000_write_word(state, 299, smo_mode);
|
|
dib8000_write_word(state, 300, fifo_threshold); /* synchronous fread */
|
|
dib8000_write_word(state, 1286, outreg);
|
|
dib8000_write_word(state, 1291, sram);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_set_diversity_in(struct dvb_frontend *fe, int onoff)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
u16 sync_wait = dib8000_read_word(state, 273) & 0xfff0;
|
|
|
|
if (!state->differential_constellation) {
|
|
dib8000_write_word(state, 272, 1 << 9); //dvsy_off_lmod4 = 1
|
|
dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2); // sync_enable = 1; comb_mode = 2
|
|
} else {
|
|
dib8000_write_word(state, 272, 0); //dvsy_off_lmod4 = 0
|
|
dib8000_write_word(state, 273, sync_wait); // sync_enable = 0; comb_mode = 0
|
|
}
|
|
state->diversity_onoff = onoff;
|
|
|
|
switch (onoff) {
|
|
case 0: /* only use the internal way - not the diversity input */
|
|
dib8000_write_word(state, 270, 1);
|
|
dib8000_write_word(state, 271, 0);
|
|
break;
|
|
case 1: /* both ways */
|
|
dib8000_write_word(state, 270, 6);
|
|
dib8000_write_word(state, 271, 6);
|
|
break;
|
|
case 2: /* only the diversity input */
|
|
dib8000_write_word(state, 270, 0);
|
|
dib8000_write_word(state, 271, 1);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_power_mode mode)
|
|
{
|
|
/* by default everything is going to be powered off */
|
|
u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff,
|
|
reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3, reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00;
|
|
|
|
/* now, depending on the requested mode, we power on */
|
|
switch (mode) {
|
|
/* power up everything in the demod */
|
|
case DIB8000M_POWER_ALL:
|
|
reg_774 = 0x0000;
|
|
reg_775 = 0x0000;
|
|
reg_776 = 0x0000;
|
|
reg_900 &= 0xfffc;
|
|
reg_1280 &= 0x00ff;
|
|
break;
|
|
case DIB8000M_POWER_INTERFACE_ONLY:
|
|
reg_1280 &= 0x00ff;
|
|
break;
|
|
}
|
|
|
|
dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774, reg_775, reg_776, reg_900, reg_1280);
|
|
dib8000_write_word(state, 774, reg_774);
|
|
dib8000_write_word(state, 775, reg_775);
|
|
dib8000_write_word(state, 776, reg_776);
|
|
dib8000_write_word(state, 900, reg_900);
|
|
dib8000_write_word(state, 1280, reg_1280);
|
|
}
|
|
|
|
static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no)
|
|
{
|
|
int ret = 0;
|
|
u16 reg_907 = dib8000_read_word(state, 907), reg_908 = dib8000_read_word(state, 908);
|
|
|
|
switch (no) {
|
|
case DIBX000_SLOW_ADC_ON:
|
|
reg_908 |= (1 << 1) | (1 << 0);
|
|
ret |= dib8000_write_word(state, 908, reg_908);
|
|
reg_908 &= ~(1 << 1);
|
|
break;
|
|
|
|
case DIBX000_SLOW_ADC_OFF:
|
|
reg_908 |= (1 << 1) | (1 << 0);
|
|
break;
|
|
|
|
case DIBX000_ADC_ON:
|
|
reg_907 &= 0x0fff;
|
|
reg_908 &= 0x0003;
|
|
break;
|
|
|
|
case DIBX000_ADC_OFF: // leave the VBG voltage on
|
|
reg_907 |= (1 << 14) | (1 << 13) | (1 << 12);
|
|
reg_908 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
|
|
break;
|
|
|
|
case DIBX000_VBG_ENABLE:
|
|
reg_907 &= ~(1 << 15);
|
|
break;
|
|
|
|
case DIBX000_VBG_DISABLE:
|
|
reg_907 |= (1 << 15);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ret |= dib8000_write_word(state, 907, reg_907);
|
|
ret |= dib8000_write_word(state, 908, reg_908);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dib8000_set_bandwidth(struct dib8000_state *state, u32 bw)
|
|
{
|
|
u32 timf;
|
|
|
|
if (bw == 0)
|
|
bw = 6000;
|
|
|
|
if (state->timf == 0) {
|
|
dprintk("using default timf");
|
|
timf = state->timf_default;
|
|
} else {
|
|
dprintk("using updated timf");
|
|
timf = state->timf;
|
|
}
|
|
|
|
dib8000_write_word(state, 29, (u16) ((timf >> 16) & 0xffff));
|
|
dib8000_write_word(state, 30, (u16) ((timf) & 0xffff));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_sad_calib(struct dib8000_state *state)
|
|
{
|
|
/* internal */
|
|
dib8000_write_word(state, 923, (0 << 1) | (0 << 0));
|
|
dib8000_write_word(state, 924, 776); // 0.625*3.3 / 4096
|
|
|
|
/* do the calibration */
|
|
dib8000_write_word(state, 923, (1 << 0));
|
|
dib8000_write_word(state, 923, (0 << 0));
|
|
|
|
msleep(1);
|
|
return 0;
|
|
}
|
|
|
|
int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
if (value > 4095)
|
|
value = 4095;
|
|
state->wbd_ref = value;
|
|
return dib8000_write_word(state, 106, value);
|
|
}
|
|
|
|
EXPORT_SYMBOL(dib8000_set_wbd_ref);
|
|
static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw)
|
|
{
|
|
dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25);
|
|
dib8000_write_word(state, 23, (u16) (((bw->internal * 1000) >> 16) & 0xffff)); /* P_sec_len */
|
|
dib8000_write_word(state, 24, (u16) ((bw->internal * 1000) & 0xffff));
|
|
dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff));
|
|
dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff));
|
|
dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003));
|
|
|
|
dib8000_write_word(state, 922, bw->sad_cfg);
|
|
}
|
|
|
|
static void dib8000_reset_pll(struct dib8000_state *state)
|
|
{
|
|
const struct dibx000_bandwidth_config *pll = state->cfg.pll;
|
|
u16 clk_cfg1;
|
|
|
|
// clk_cfg0
|
|
dib8000_write_word(state, 901, (pll->pll_prediv << 8) | (pll->pll_ratio << 0));
|
|
|
|
// clk_cfg1
|
|
clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) |
|
|
(pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | (1 << 3) | (pll->pll_range << 1) | (pll->pll_reset << 0);
|
|
|
|
dib8000_write_word(state, 902, clk_cfg1);
|
|
clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3);
|
|
dib8000_write_word(state, 902, clk_cfg1);
|
|
|
|
dprintk("clk_cfg1: 0x%04x", clk_cfg1); /* 0x507 1 0 1 000 0 0 11 1 */
|
|
|
|
/* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */
|
|
if (state->cfg.pll->ADClkSrc == 0)
|
|
dib8000_write_word(state, 904, (0 << 15) | (0 << 12) | (0 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
|
|
else if (state->cfg.refclksel != 0)
|
|
dib8000_write_word(state, 904,
|
|
(0 << 15) | (1 << 12) | ((state->cfg.refclksel & 0x3) << 10) | (pll->modulo << 8) | (pll->
|
|
ADClkSrc << 7) | (0 << 1));
|
|
else
|
|
dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | (3 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1));
|
|
|
|
dib8000_reset_pll_common(state, pll);
|
|
}
|
|
|
|
static int dib8000_reset_gpio(struct dib8000_state *st)
|
|
{
|
|
/* reset the GPIOs */
|
|
dib8000_write_word(st, 1029, st->cfg.gpio_dir);
|
|
dib8000_write_word(st, 1030, st->cfg.gpio_val);
|
|
|
|
/* TODO 782 is P_gpio_od */
|
|
|
|
dib8000_write_word(st, 1032, st->cfg.gpio_pwm_pos);
|
|
|
|
dib8000_write_word(st, 1037, st->cfg.pwm_freq_div);
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_cfg_gpio(struct dib8000_state *st, u8 num, u8 dir, u8 val)
|
|
{
|
|
st->cfg.gpio_dir = dib8000_read_word(st, 1029);
|
|
st->cfg.gpio_dir &= ~(1 << num); /* reset the direction bit */
|
|
st->cfg.gpio_dir |= (dir & 0x1) << num; /* set the new direction */
|
|
dib8000_write_word(st, 1029, st->cfg.gpio_dir);
|
|
|
|
st->cfg.gpio_val = dib8000_read_word(st, 1030);
|
|
st->cfg.gpio_val &= ~(1 << num); /* reset the direction bit */
|
|
st->cfg.gpio_val |= (val & 0x01) << num; /* set the new value */
|
|
dib8000_write_word(st, 1030, st->cfg.gpio_val);
|
|
|
|
dprintk("gpio dir: %x: gpio val: %x", st->cfg.gpio_dir, st->cfg.gpio_val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
return dib8000_cfg_gpio(state, num, dir, val);
|
|
}
|
|
|
|
EXPORT_SYMBOL(dib8000_set_gpio);
|
|
static const u16 dib8000_defaults[] = {
|
|
/* auto search configuration - lock0 by default waiting
|
|
* for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */
|
|
3, 7,
|
|
0x0004,
|
|
0x0400,
|
|
0x0814,
|
|
|
|
12, 11,
|
|
0x001b,
|
|
0x7740,
|
|
0x005b,
|
|
0x8d80,
|
|
0x01c9,
|
|
0xc380,
|
|
0x0000,
|
|
0x0080,
|
|
0x0000,
|
|
0x0090,
|
|
0x0001,
|
|
0xd4c0,
|
|
|
|
/*1, 32,
|
|
0x6680 // P_corm_thres Lock algorithms configuration */
|
|
|
|
11, 80, /* set ADC level to -16 */
|
|
(1 << 13) - 825 - 117,
|
|
(1 << 13) - 837 - 117,
|
|
(1 << 13) - 811 - 117,
|
|
(1 << 13) - 766 - 117,
|
|
(1 << 13) - 737 - 117,
|
|
(1 << 13) - 693 - 117,
|
|
(1 << 13) - 648 - 117,
|
|
(1 << 13) - 619 - 117,
|
|
(1 << 13) - 575 - 117,
|
|
(1 << 13) - 531 - 117,
|
|
(1 << 13) - 501 - 117,
|
|
|
|
4, 108,
|
|
0,
|
|
0,
|
|
0,
|
|
0,
|
|
|
|
1, 175,
|
|
0x0410,
|
|
1, 179,
|
|
8192, // P_fft_nb_to_cut
|
|
|
|
6, 181,
|
|
0x2800, // P_coff_corthres_ ( 2k 4k 8k ) 0x2800
|
|
0x2800,
|
|
0x2800,
|
|
0x2800, // P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800
|
|
0x2800,
|
|
0x2800,
|
|
|
|
2, 193,
|
|
0x0666, // P_pha3_thres
|
|
0x0000, // P_cti_use_cpe, P_cti_use_prog
|
|
|
|
2, 205,
|
|
0x200f, // P_cspu_regul, P_cspu_win_cut
|
|
0x000f, // P_des_shift_work
|
|
|
|
5, 215,
|
|
0x023d, // P_adp_regul_cnt
|
|
0x00a4, // P_adp_noise_cnt
|
|
0x00a4, // P_adp_regul_ext
|
|
0x7ff0, // P_adp_noise_ext
|
|
0x3ccc, // P_adp_fil
|
|
|
|
1, 230,
|
|
0x0000, // P_2d_byp_ti_num
|
|
|
|
1, 263,
|
|
0x800, //P_equal_thres_wgn
|
|
|
|
1, 268,
|
|
(2 << 9) | 39, // P_equal_ctrl_synchro, P_equal_speedmode
|
|
|
|
1, 270,
|
|
0x0001, // P_div_lock0_wait
|
|
1, 285,
|
|
0x0020, //p_fec_
|
|
1, 299,
|
|
0x0062, // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
|
|
|
|
1, 338,
|
|
(1 << 12) | // P_ctrl_corm_thres4pre_freq_inh=1
|
|
(1 << 10) | // P_ctrl_pre_freq_mode_sat=1
|
|
(0 << 9) | // P_ctrl_pre_freq_inh=0
|
|
(3 << 5) | // P_ctrl_pre_freq_step=3
|
|
(1 << 0), // P_pre_freq_win_len=1
|
|
|
|
1, 903,
|
|
(0 << 4) | 2, // P_divclksel=0 P_divbitsel=2 (was clk=3,bit=1 for MPW)
|
|
|
|
0,
|
|
};
|
|
|
|
static u16 dib8000_identify(struct i2c_device *client)
|
|
{
|
|
u16 value;
|
|
|
|
//because of glitches sometimes
|
|
value = dib8000_i2c_read16(client, 896);
|
|
|
|
if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) {
|
|
dprintk("wrong Vendor ID (read=0x%x)", value);
|
|
return 0;
|
|
}
|
|
|
|
value = dib8000_i2c_read16(client, 897);
|
|
if (value != 0x8000 && value != 0x8001 && value != 0x8002) {
|
|
dprintk("wrong Device ID (%x)", value);
|
|
return 0;
|
|
}
|
|
|
|
switch (value) {
|
|
case 0x8000:
|
|
dprintk("found DiB8000A");
|
|
break;
|
|
case 0x8001:
|
|
dprintk("found DiB8000B");
|
|
break;
|
|
case 0x8002:
|
|
dprintk("found DiB8000C");
|
|
break;
|
|
}
|
|
return value;
|
|
}
|
|
|
|
static int dib8000_reset(struct dvb_frontend *fe)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
|
|
dib8000_write_word(state, 1287, 0x0003); /* sram lead in, rdy */
|
|
|
|
if ((state->revision = dib8000_identify(&state->i2c)) == 0)
|
|
return -EINVAL;
|
|
|
|
if (state->revision == 0x8000)
|
|
dprintk("error : dib8000 MA not supported");
|
|
|
|
dibx000_reset_i2c_master(&state->i2c_master);
|
|
|
|
dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
|
|
|
|
/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
|
|
dib8000_set_adc_state(state, DIBX000_VBG_ENABLE);
|
|
|
|
/* restart all parts */
|
|
dib8000_write_word(state, 770, 0xffff);
|
|
dib8000_write_word(state, 771, 0xffff);
|
|
dib8000_write_word(state, 772, 0xfffc);
|
|
dib8000_write_word(state, 898, 0x000c); // sad
|
|
dib8000_write_word(state, 1280, 0x004d);
|
|
dib8000_write_word(state, 1281, 0x000c);
|
|
|
|
dib8000_write_word(state, 770, 0x0000);
|
|
dib8000_write_word(state, 771, 0x0000);
|
|
dib8000_write_word(state, 772, 0x0000);
|
|
dib8000_write_word(state, 898, 0x0004); // sad
|
|
dib8000_write_word(state, 1280, 0x0000);
|
|
dib8000_write_word(state, 1281, 0x0000);
|
|
|
|
/* drives */
|
|
if (state->cfg.drives)
|
|
dib8000_write_word(state, 906, state->cfg.drives);
|
|
else {
|
|
dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.");
|
|
dib8000_write_word(state, 906, 0x2d98); // min drive SDRAM - not optimal - adjust
|
|
}
|
|
|
|
dib8000_reset_pll(state);
|
|
|
|
if (dib8000_reset_gpio(state) != 0)
|
|
dprintk("GPIO reset was not successful.");
|
|
|
|
if (dib8000_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
|
|
dprintk("OUTPUT_MODE could not be resetted.");
|
|
|
|
state->current_agc = NULL;
|
|
|
|
// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
|
|
/* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */
|
|
if (state->cfg.pll->ifreq == 0)
|
|
dib8000_write_word(state, 40, 0x0755); /* P_iqc_corr_inh = 0 enable IQcorr block */
|
|
else
|
|
dib8000_write_word(state, 40, 0x1f55); /* P_iqc_corr_inh = 1 disable IQcorr block */
|
|
|
|
{
|
|
u16 l = 0, r;
|
|
const u16 *n;
|
|
n = dib8000_defaults;
|
|
l = *n++;
|
|
while (l) {
|
|
r = *n++;
|
|
do {
|
|
dib8000_write_word(state, r, *n++);
|
|
r++;
|
|
} while (--l);
|
|
l = *n++;
|
|
}
|
|
}
|
|
state->isdbt_cfg_loaded = 0;
|
|
|
|
//div_cfg override for special configs
|
|
if (state->cfg.div_cfg != 0)
|
|
dib8000_write_word(state, 903, state->cfg.div_cfg);
|
|
|
|
/* unforce divstr regardless whether i2c enumeration was done or not */
|
|
dib8000_write_word(state, 1285, dib8000_read_word(state, 1285) & ~(1 << 1));
|
|
|
|
dib8000_set_bandwidth(state, 6000);
|
|
|
|
dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON);
|
|
dib8000_sad_calib(state);
|
|
dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
|
|
|
|
dib8000_set_power_mode(state, DIB8000M_POWER_INTERFACE_ONLY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dib8000_restart_agc(struct dib8000_state *state)
|
|
{
|
|
// P_restart_iqc & P_restart_agc
|
|
dib8000_write_word(state, 770, 0x0a00);
|
|
dib8000_write_word(state, 770, 0x0000);
|
|
}
|
|
|
|
static int dib8000_update_lna(struct dib8000_state *state)
|
|
{
|
|
u16 dyn_gain;
|
|
|
|
if (state->cfg.update_lna) {
|
|
// read dyn_gain here (because it is demod-dependent and not tuner)
|
|
dyn_gain = dib8000_read_word(state, 390);
|
|
|
|
if (state->cfg.update_lna(&state->fe, dyn_gain)) { // LNA has changed
|
|
dib8000_restart_agc(state);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_set_agc_config(struct dib8000_state *state, u8 band)
|
|
{
|
|
struct dibx000_agc_config *agc = NULL;
|
|
int i;
|
|
if (state->current_band == band && state->current_agc != NULL)
|
|
return 0;
|
|
state->current_band = band;
|
|
|
|
for (i = 0; i < state->cfg.agc_config_count; i++)
|
|
if (state->cfg.agc[i].band_caps & band) {
|
|
agc = &state->cfg.agc[i];
|
|
break;
|
|
}
|
|
|
|
if (agc == NULL) {
|
|
dprintk("no valid AGC configuration found for band 0x%02x", band);
|
|
return -EINVAL;
|
|
}
|
|
|
|
state->current_agc = agc;
|
|
|
|
/* AGC */
|
|
dib8000_write_word(state, 76, agc->setup);
|
|
dib8000_write_word(state, 77, agc->inv_gain);
|
|
dib8000_write_word(state, 78, agc->time_stabiliz);
|
|
dib8000_write_word(state, 101, (agc->alpha_level << 12) | agc->thlock);
|
|
|
|
// Demod AGC loop configuration
|
|
dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp);
|
|
dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp);
|
|
|
|
dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d",
|
|
state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
|
|
|
|
/* AGC continued */
|
|
if (state->wbd_ref != 0)
|
|
dib8000_write_word(state, 106, state->wbd_ref);
|
|
else // use default
|
|
dib8000_write_word(state, 106, agc->wbd_ref);
|
|
dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8));
|
|
dib8000_write_word(state, 108, agc->agc1_max);
|
|
dib8000_write_word(state, 109, agc->agc1_min);
|
|
dib8000_write_word(state, 110, agc->agc2_max);
|
|
dib8000_write_word(state, 111, agc->agc2_min);
|
|
dib8000_write_word(state, 112, (agc->agc1_pt1 << 8) | agc->agc1_pt2);
|
|
dib8000_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
|
|
dib8000_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
|
|
dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
|
|
|
|
dib8000_write_word(state, 75, agc->agc1_pt3);
|
|
dib8000_write_word(state, 923, (dib8000_read_word(state, 923) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); /*LB : 929 -> 923 */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_agc_soft_split(struct dib8000_state *state)
|
|
{
|
|
u16 agc, split_offset;
|
|
|
|
if (!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
|
|
return FE_CALLBACK_TIME_NEVER;
|
|
|
|
// n_agc_global
|
|
agc = dib8000_read_word(state, 390);
|
|
|
|
if (agc > state->current_agc->split.min_thres)
|
|
split_offset = state->current_agc->split.min;
|
|
else if (agc < state->current_agc->split.max_thres)
|
|
split_offset = state->current_agc->split.max;
|
|
else
|
|
split_offset = state->current_agc->split.max *
|
|
(agc - state->current_agc->split.min_thres) / (state->current_agc->split.max_thres - state->current_agc->split.min_thres);
|
|
|
|
dprintk("AGC split_offset: %d", split_offset);
|
|
|
|
// P_agc_force_split and P_agc_split_offset
|
|
dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset);
|
|
return 5000;
|
|
}
|
|
|
|
static int dib8000_agc_startup(struct dvb_frontend *fe)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
enum frontend_tune_state *tune_state = &state->tune_state;
|
|
|
|
int ret = 0;
|
|
|
|
switch (*tune_state) {
|
|
case CT_AGC_START:
|
|
// set power-up level: interf+analog+AGC
|
|
|
|
dib8000_set_adc_state(state, DIBX000_ADC_ON);
|
|
|
|
if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) {
|
|
*tune_state = CT_AGC_STOP;
|
|
state->status = FE_STATUS_TUNE_FAILED;
|
|
break;
|
|
}
|
|
|
|
ret = 70;
|
|
*tune_state = CT_AGC_STEP_0;
|
|
break;
|
|
|
|
case CT_AGC_STEP_0:
|
|
//AGC initialization
|
|
if (state->cfg.agc_control)
|
|
state->cfg.agc_control(&state->fe, 1);
|
|
|
|
dib8000_restart_agc(state);
|
|
|
|
// wait AGC rough lock time
|
|
ret = 50;
|
|
*tune_state = CT_AGC_STEP_1;
|
|
break;
|
|
|
|
case CT_AGC_STEP_1:
|
|
// wait AGC accurate lock time
|
|
ret = 70;
|
|
|
|
if (dib8000_update_lna(state))
|
|
// wait only AGC rough lock time
|
|
ret = 50;
|
|
else
|
|
*tune_state = CT_AGC_STEP_2;
|
|
break;
|
|
|
|
case CT_AGC_STEP_2:
|
|
dib8000_agc_soft_split(state);
|
|
|
|
if (state->cfg.agc_control)
|
|
state->cfg.agc_control(&state->fe, 0);
|
|
|
|
*tune_state = CT_AGC_STOP;
|
|
break;
|
|
default:
|
|
ret = dib8000_agc_soft_split(state);
|
|
break;
|
|
}
|
|
return ret;
|
|
|
|
}
|
|
|
|
static void dib8000_update_timf(struct dib8000_state *state)
|
|
{
|
|
u32 timf = state->timf = dib8000_read32(state, 435);
|
|
|
|
dib8000_write_word(state, 29, (u16) (timf >> 16));
|
|
dib8000_write_word(state, 30, (u16) (timf & 0xffff));
|
|
dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default);
|
|
}
|
|
|
|
static void dib8000_set_channel(struct dib8000_state *state, u8 seq, u8 autosearching)
|
|
{
|
|
u16 mode, max_constellation, seg_diff_mask = 0, nbseg_diff = 0;
|
|
u8 guard, crate, constellation, timeI;
|
|
u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 };
|
|
u16 i, coeff[4], P_cfr_left_edge = 0, P_cfr_right_edge = 0, seg_mask13 = 0x1fff; // All 13 segments enabled
|
|
const s16 *ncoeff, *ana_fe;
|
|
u16 tmcc_pow = 0;
|
|
u16 coff_pow = 0x2800;
|
|
u16 init_prbs = 0xfff;
|
|
u16 ana_gain = 0;
|
|
u16 adc_target_16dB[11] = {
|
|
(1 << 13) - 825 - 117,
|
|
(1 << 13) - 837 - 117,
|
|
(1 << 13) - 811 - 117,
|
|
(1 << 13) - 766 - 117,
|
|
(1 << 13) - 737 - 117,
|
|
(1 << 13) - 693 - 117,
|
|
(1 << 13) - 648 - 117,
|
|
(1 << 13) - 619 - 117,
|
|
(1 << 13) - 575 - 117,
|
|
(1 << 13) - 531 - 117,
|
|
(1 << 13) - 501 - 117
|
|
};
|
|
|
|
if (state->ber_monitored_layer != LAYER_ALL)
|
|
dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & 0x60) | state->ber_monitored_layer);
|
|
else
|
|
dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60);
|
|
|
|
i = dib8000_read_word(state, 26) & 1; // P_dds_invspec
|
|
dib8000_write_word(state, 26, state->fe.dtv_property_cache.inversion ^ i);
|
|
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode) {
|
|
//compute new dds_freq for the seg and adjust prbs
|
|
int seg_offset =
|
|
state->fe.dtv_property_cache.isdbt_sb_segment_idx - (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) -
|
|
(state->fe.dtv_property_cache.isdbt_sb_segment_count % 2);
|
|
int clk = state->cfg.pll->internal;
|
|
u32 segtodds = ((u32) (430 << 23) / clk) << 3; // segtodds = SegBW / Fclk * pow(2,26)
|
|
int dds_offset = seg_offset * segtodds;
|
|
int new_dds, sub_channel;
|
|
if ((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0) // if even
|
|
dds_offset -= (int)(segtodds / 2);
|
|
|
|
if (state->cfg.pll->ifreq == 0) {
|
|
if ((state->fe.dtv_property_cache.inversion ^ i) == 0) {
|
|
dib8000_write_word(state, 26, dib8000_read_word(state, 26) | 1);
|
|
new_dds = dds_offset;
|
|
} else
|
|
new_dds = dds_offset;
|
|
|
|
// We shift tuning frequency if the wanted segment is :
|
|
// - the segment of center frequency with an odd total number of segments
|
|
// - the segment to the left of center frequency with an even total number of segments
|
|
// - the segment to the right of center frequency with an even total number of segments
|
|
if ((state->fe.dtv_property_cache.delivery_system == SYS_ISDBT) && (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
|
|
&&
|
|
(((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2)
|
|
&& (state->fe.dtv_property_cache.isdbt_sb_segment_idx ==
|
|
((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
|
|
|| (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
|
|
&& (state->fe.dtv_property_cache.isdbt_sb_segment_idx == (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2)))
|
|
|| (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0)
|
|
&& (state->fe.dtv_property_cache.isdbt_sb_segment_idx ==
|
|
((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))
|
|
)) {
|
|
new_dds -= ((u32) (850 << 22) / clk) << 4; // new_dds = 850 (freq shift in KHz) / Fclk * pow(2,26)
|
|
}
|
|
} else {
|
|
if ((state->fe.dtv_property_cache.inversion ^ i) == 0)
|
|
new_dds = state->cfg.pll->ifreq - dds_offset;
|
|
else
|
|
new_dds = state->cfg.pll->ifreq + dds_offset;
|
|
}
|
|
dib8000_write_word(state, 27, (u16) ((new_dds >> 16) & 0x01ff));
|
|
dib8000_write_word(state, 28, (u16) (new_dds & 0xffff));
|
|
if (state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) // if odd
|
|
sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset) + 1) % 41) / 3;
|
|
else // if even
|
|
sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset)) % 41) / 3;
|
|
sub_channel -= 6;
|
|
|
|
if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K
|
|
|| state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_4K) {
|
|
dib8000_write_word(state, 219, dib8000_read_word(state, 219) | 0x1); //adp_pass =1
|
|
dib8000_write_word(state, 190, dib8000_read_word(state, 190) | (0x1 << 14)); //pha3_force_pha_shift = 1
|
|
} else {
|
|
dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); //adp_pass =0
|
|
dib8000_write_word(state, 190, dib8000_read_word(state, 190) & 0xbfff); //pha3_force_pha_shift = 0
|
|
}
|
|
|
|
switch (state->fe.dtv_property_cache.transmission_mode) {
|
|
case TRANSMISSION_MODE_2K:
|
|
switch (sub_channel) {
|
|
case -6:
|
|
init_prbs = 0x0;
|
|
break; // 41, 0, 1
|
|
case -5:
|
|
init_prbs = 0x423;
|
|
break; // 02~04
|
|
case -4:
|
|
init_prbs = 0x9;
|
|
break; // 05~07
|
|
case -3:
|
|
init_prbs = 0x5C7;
|
|
break; // 08~10
|
|
case -2:
|
|
init_prbs = 0x7A6;
|
|
break; // 11~13
|
|
case -1:
|
|
init_prbs = 0x3D8;
|
|
break; // 14~16
|
|
case 0:
|
|
init_prbs = 0x527;
|
|
break; // 17~19
|
|
case 1:
|
|
init_prbs = 0x7FF;
|
|
break; // 20~22
|
|
case 2:
|
|
init_prbs = 0x79B;
|
|
break; // 23~25
|
|
case 3:
|
|
init_prbs = 0x3D6;
|
|
break; // 26~28
|
|
case 4:
|
|
init_prbs = 0x3A2;
|
|
break; // 29~31
|
|
case 5:
|
|
init_prbs = 0x53B;
|
|
break; // 32~34
|
|
case 6:
|
|
init_prbs = 0x2F4;
|
|
break; // 35~37
|
|
default:
|
|
case 7:
|
|
init_prbs = 0x213;
|
|
break; // 38~40
|
|
}
|
|
break;
|
|
|
|
case TRANSMISSION_MODE_4K:
|
|
switch (sub_channel) {
|
|
case -6:
|
|
init_prbs = 0x0;
|
|
break; // 41, 0, 1
|
|
case -5:
|
|
init_prbs = 0x208;
|
|
break; // 02~04
|
|
case -4:
|
|
init_prbs = 0xC3;
|
|
break; // 05~07
|
|
case -3:
|
|
init_prbs = 0x7B9;
|
|
break; // 08~10
|
|
case -2:
|
|
init_prbs = 0x423;
|
|
break; // 11~13
|
|
case -1:
|
|
init_prbs = 0x5C7;
|
|
break; // 14~16
|
|
case 0:
|
|
init_prbs = 0x3D8;
|
|
break; // 17~19
|
|
case 1:
|
|
init_prbs = 0x7FF;
|
|
break; // 20~22
|
|
case 2:
|
|
init_prbs = 0x3D6;
|
|
break; // 23~25
|
|
case 3:
|
|
init_prbs = 0x53B;
|
|
break; // 26~28
|
|
case 4:
|
|
init_prbs = 0x213;
|
|
break; // 29~31
|
|
case 5:
|
|
init_prbs = 0x29;
|
|
break; // 32~34
|
|
case 6:
|
|
init_prbs = 0xD0;
|
|
break; // 35~37
|
|
default:
|
|
case 7:
|
|
init_prbs = 0x48E;
|
|
break; // 38~40
|
|
}
|
|
break;
|
|
|
|
default:
|
|
case TRANSMISSION_MODE_8K:
|
|
switch (sub_channel) {
|
|
case -6:
|
|
init_prbs = 0x0;
|
|
break; // 41, 0, 1
|
|
case -5:
|
|
init_prbs = 0x740;
|
|
break; // 02~04
|
|
case -4:
|
|
init_prbs = 0x069;
|
|
break; // 05~07
|
|
case -3:
|
|
init_prbs = 0x7DD;
|
|
break; // 08~10
|
|
case -2:
|
|
init_prbs = 0x208;
|
|
break; // 11~13
|
|
case -1:
|
|
init_prbs = 0x7B9;
|
|
break; // 14~16
|
|
case 0:
|
|
init_prbs = 0x5C7;
|
|
break; // 17~19
|
|
case 1:
|
|
init_prbs = 0x7FF;
|
|
break; // 20~22
|
|
case 2:
|
|
init_prbs = 0x53B;
|
|
break; // 23~25
|
|
case 3:
|
|
init_prbs = 0x29;
|
|
break; // 26~28
|
|
case 4:
|
|
init_prbs = 0x48E;
|
|
break; // 29~31
|
|
case 5:
|
|
init_prbs = 0x4C4;
|
|
break; // 32~34
|
|
case 6:
|
|
init_prbs = 0x367;
|
|
break; // 33~37
|
|
default:
|
|
case 7:
|
|
init_prbs = 0x684;
|
|
break; // 38~40
|
|
}
|
|
break;
|
|
}
|
|
} else { // if not state->fe.dtv_property_cache.isdbt_sb_mode
|
|
dib8000_write_word(state, 27, (u16) ((state->cfg.pll->ifreq >> 16) & 0x01ff));
|
|
dib8000_write_word(state, 28, (u16) (state->cfg.pll->ifreq & 0xffff));
|
|
dib8000_write_word(state, 26, (u16) ((state->cfg.pll->ifreq >> 25) & 0x0003));
|
|
}
|
|
/*P_mode == ?? */
|
|
dib8000_write_word(state, 10, (seq << 4));
|
|
// dib8000_write_word(state, 287, (dib8000_read_word(state, 287) & 0xe000) | 0x1000);
|
|
|
|
switch (state->fe.dtv_property_cache.guard_interval) {
|
|
case GUARD_INTERVAL_1_32:
|
|
guard = 0;
|
|
break;
|
|
case GUARD_INTERVAL_1_16:
|
|
guard = 1;
|
|
break;
|
|
case GUARD_INTERVAL_1_8:
|
|
guard = 2;
|
|
break;
|
|
case GUARD_INTERVAL_1_4:
|
|
default:
|
|
guard = 3;
|
|
break;
|
|
}
|
|
|
|
dib8000_write_word(state, 1, (init_prbs << 2) | (guard & 0x3)); // ADDR 1
|
|
|
|
max_constellation = DQPSK;
|
|
for (i = 0; i < 3; i++) {
|
|
switch (state->fe.dtv_property_cache.layer[i].modulation) {
|
|
case DQPSK:
|
|
constellation = 0;
|
|
break;
|
|
case QPSK:
|
|
constellation = 1;
|
|
break;
|
|
case QAM_16:
|
|
constellation = 2;
|
|
break;
|
|
case QAM_64:
|
|
default:
|
|
constellation = 3;
|
|
break;
|
|
}
|
|
|
|
switch (state->fe.dtv_property_cache.layer[i].fec) {
|
|
case FEC_1_2:
|
|
crate = 1;
|
|
break;
|
|
case FEC_2_3:
|
|
crate = 2;
|
|
break;
|
|
case FEC_3_4:
|
|
crate = 3;
|
|
break;
|
|
case FEC_5_6:
|
|
crate = 5;
|
|
break;
|
|
case FEC_7_8:
|
|
default:
|
|
crate = 7;
|
|
break;
|
|
}
|
|
|
|
if ((state->fe.dtv_property_cache.layer[i].interleaving > 0) &&
|
|
((state->fe.dtv_property_cache.layer[i].interleaving <= 3) ||
|
|
(state->fe.dtv_property_cache.layer[i].interleaving == 4 && state->fe.dtv_property_cache.isdbt_sb_mode == 1))
|
|
)
|
|
timeI = state->fe.dtv_property_cache.layer[i].interleaving;
|
|
else
|
|
timeI = 0;
|
|
dib8000_write_word(state, 2 + i, (constellation << 10) | ((state->fe.dtv_property_cache.layer[i].segment_count & 0xf) << 6) |
|
|
(crate << 3) | timeI);
|
|
if (state->fe.dtv_property_cache.layer[i].segment_count > 0) {
|
|
switch (max_constellation) {
|
|
case DQPSK:
|
|
case QPSK:
|
|
if (state->fe.dtv_property_cache.layer[i].modulation == QAM_16 ||
|
|
state->fe.dtv_property_cache.layer[i].modulation == QAM_64)
|
|
max_constellation = state->fe.dtv_property_cache.layer[i].modulation;
|
|
break;
|
|
case QAM_16:
|
|
if (state->fe.dtv_property_cache.layer[i].modulation == QAM_64)
|
|
max_constellation = state->fe.dtv_property_cache.layer[i].modulation;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
mode = fft_to_mode(state);
|
|
|
|
//dib8000_write_word(state, 5, 13); /*p_last_seg = 13*/
|
|
|
|
dib8000_write_word(state, 274, (dib8000_read_word(state, 274) & 0xffcf) |
|
|
((state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 5) | ((state->fe.dtv_property_cache.
|
|
isdbt_sb_mode & 1) << 4));
|
|
|
|
dprintk("mode = %d ; guard = %d", mode, state->fe.dtv_property_cache.guard_interval);
|
|
|
|
/* signal optimization parameter */
|
|
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception) {
|
|
seg_diff_mask = (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) << permu_seg[0];
|
|
for (i = 1; i < 3; i++)
|
|
nbseg_diff +=
|
|
(state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count;
|
|
for (i = 0; i < nbseg_diff; i++)
|
|
seg_diff_mask |= 1 << permu_seg[i + 1];
|
|
} else {
|
|
for (i = 0; i < 3; i++)
|
|
nbseg_diff +=
|
|
(state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count;
|
|
for (i = 0; i < nbseg_diff; i++)
|
|
seg_diff_mask |= 1 << permu_seg[i];
|
|
}
|
|
dprintk("nbseg_diff = %X (%d)", seg_diff_mask, seg_diff_mask);
|
|
|
|
state->differential_constellation = (seg_diff_mask != 0);
|
|
dib8000_set_diversity_in(&state->fe, state->diversity_onoff);
|
|
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { // ISDB-Tsb
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 1) // 3-segments
|
|
seg_mask13 = 0x00E0;
|
|
else // 1-segment
|
|
seg_mask13 = 0x0040;
|
|
} else
|
|
seg_mask13 = 0x1fff;
|
|
|
|
// WRITE: Mode & Diff mask
|
|
dib8000_write_word(state, 0, (mode << 13) | seg_diff_mask);
|
|
|
|
if ((seg_diff_mask) || (state->fe.dtv_property_cache.isdbt_sb_mode))
|
|
dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200);
|
|
else
|
|
dib8000_write_word(state, 268, (2 << 9) | 39); //init value
|
|
|
|
// ---- SMALL ----
|
|
// P_small_seg_diff
|
|
dib8000_write_word(state, 352, seg_diff_mask); // ADDR 352
|
|
|
|
dib8000_write_word(state, 353, seg_mask13); // ADDR 353
|
|
|
|
/* // P_small_narrow_band=0, P_small_last_seg=13, P_small_offset_num_car=5 */
|
|
// dib8000_write_word(state, 351, (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5 );
|
|
|
|
// ---- SMALL ----
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
|
|
switch (state->fe.dtv_property_cache.transmission_mode) {
|
|
case TRANSMISSION_MODE_2K:
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // 1-seg
|
|
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) // DQPSK
|
|
ncoeff = coeff_2k_sb_1seg_dqpsk;
|
|
else // QPSK or QAM
|
|
ncoeff = coeff_2k_sb_1seg;
|
|
} else { // 3-segments
|
|
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) { // DQPSK on central segment
|
|
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) // DQPSK on external segments
|
|
ncoeff = coeff_2k_sb_3seg_0dqpsk_1dqpsk;
|
|
else // QPSK or QAM on external segments
|
|
ncoeff = coeff_2k_sb_3seg_0dqpsk;
|
|
} else { // QPSK or QAM on central segment
|
|
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) // DQPSK on external segments
|
|
ncoeff = coeff_2k_sb_3seg_1dqpsk;
|
|
else // QPSK or QAM on external segments
|
|
ncoeff = coeff_2k_sb_3seg;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case TRANSMISSION_MODE_4K:
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // 1-seg
|
|
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) // DQPSK
|
|
ncoeff = coeff_4k_sb_1seg_dqpsk;
|
|
else // QPSK or QAM
|
|
ncoeff = coeff_4k_sb_1seg;
|
|
} else { // 3-segments
|
|
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) { // DQPSK on central segment
|
|
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments
|
|
ncoeff = coeff_4k_sb_3seg_0dqpsk_1dqpsk;
|
|
} else { // QPSK or QAM on external segments
|
|
ncoeff = coeff_4k_sb_3seg_0dqpsk;
|
|
}
|
|
} else { // QPSK or QAM on central segment
|
|
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments
|
|
ncoeff = coeff_4k_sb_3seg_1dqpsk;
|
|
} else // QPSK or QAM on external segments
|
|
ncoeff = coeff_4k_sb_3seg;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case TRANSMISSION_MODE_AUTO:
|
|
case TRANSMISSION_MODE_8K:
|
|
default:
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // 1-seg
|
|
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) // DQPSK
|
|
ncoeff = coeff_8k_sb_1seg_dqpsk;
|
|
else // QPSK or QAM
|
|
ncoeff = coeff_8k_sb_1seg;
|
|
} else { // 3-segments
|
|
if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) { // DQPSK on central segment
|
|
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments
|
|
ncoeff = coeff_8k_sb_3seg_0dqpsk_1dqpsk;
|
|
} else { // QPSK or QAM on external segments
|
|
ncoeff = coeff_8k_sb_3seg_0dqpsk;
|
|
}
|
|
} else { // QPSK or QAM on central segment
|
|
if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments
|
|
ncoeff = coeff_8k_sb_3seg_1dqpsk;
|
|
} else // QPSK or QAM on external segments
|
|
ncoeff = coeff_8k_sb_3seg;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
|
|
for (i = 0; i < 8; i++)
|
|
dib8000_write_word(state, 343 + i, ncoeff[i]);
|
|
|
|
// P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5
|
|
dib8000_write_word(state, 351,
|
|
(state->fe.dtv_property_cache.isdbt_sb_mode << 9) | (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5);
|
|
|
|
// ---- COFF ----
|
|
// Carloff, the most robust
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { // Sound Broadcasting mode - use both TMCC and AC pilots
|
|
|
|
// P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64
|
|
// P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1
|
|
dib8000_write_word(state, 187,
|
|
(4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 2)
|
|
| 0x3);
|
|
|
|
/* // P_small_coef_ext_enable = 1 */
|
|
/* dib8000_write_word(state, 351, dib8000_read_word(state, 351) | 0x200); */
|
|
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // Sound Broadcasting mode 1 seg
|
|
|
|
// P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width= (P_mode == 3) , P_coff_one_seg_sym= (P_mode-1)
|
|
if (mode == 3)
|
|
dib8000_write_word(state, 180, 0x1fcf | ((mode - 1) << 14));
|
|
else
|
|
dib8000_write_word(state, 180, 0x0fcf | ((mode - 1) << 14));
|
|
// P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1,
|
|
// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4
|
|
dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4);
|
|
// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
|
|
dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
|
|
// P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
|
|
dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
|
|
|
|
// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
|
|
dib8000_write_word(state, 181, 300);
|
|
dib8000_write_word(state, 182, 150);
|
|
dib8000_write_word(state, 183, 80);
|
|
dib8000_write_word(state, 184, 300);
|
|
dib8000_write_word(state, 185, 150);
|
|
dib8000_write_word(state, 186, 80);
|
|
} else { // Sound Broadcasting mode 3 seg
|
|
// P_coff_one_seg_sym= 1, P_coff_one_seg_width= 1, P_coff_winlen=63, P_coff_thres_lock=15
|
|
/* if (mode == 3) */
|
|
/* dib8000_write_word(state, 180, 0x2fca | ((0) << 14)); */
|
|
/* else */
|
|
/* dib8000_write_word(state, 180, 0x2fca | ((1) << 14)); */
|
|
dib8000_write_word(state, 180, 0x1fcf | (1 << 14));
|
|
|
|
// P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1,
|
|
// P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4
|
|
dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4);
|
|
// P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8
|
|
dib8000_write_word(state, 340, (16 << 6) | (8 << 0));
|
|
//P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1
|
|
dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
|
|
|
|
// P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k
|
|
dib8000_write_word(state, 181, 350);
|
|
dib8000_write_word(state, 182, 300);
|
|
dib8000_write_word(state, 183, 250);
|
|
dib8000_write_word(state, 184, 350);
|
|
dib8000_write_word(state, 185, 300);
|
|
dib8000_write_word(state, 186, 250);
|
|
}
|
|
|
|
} else if (state->isdbt_cfg_loaded == 0) { // if not Sound Broadcasting mode : put default values for 13 segments
|
|
dib8000_write_word(state, 180, (16 << 6) | 9);
|
|
dib8000_write_word(state, 187, (4 << 12) | (8 << 5) | 0x2);
|
|
coff_pow = 0x2800;
|
|
for (i = 0; i < 6; i++)
|
|
dib8000_write_word(state, 181 + i, coff_pow);
|
|
|
|
// P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1,
|
|
// P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1
|
|
dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1);
|
|
|
|
// P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6
|
|
dib8000_write_word(state, 340, (8 << 6) | (6 << 0));
|
|
// P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1
|
|
dib8000_write_word(state, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
|
|
}
|
|
// ---- FFT ----
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 && state->fe.dtv_property_cache.isdbt_partial_reception == 0) // 1-seg
|
|
dib8000_write_word(state, 178, 64); // P_fft_powrange=64
|
|
else
|
|
dib8000_write_word(state, 178, 32); // P_fft_powrange=32
|
|
|
|
/* make the cpil_coff_lock more robust but slower p_coff_winlen
|
|
* 6bits; p_coff_thres_lock 6bits (for coff lock if needed)
|
|
*/
|
|
/* if ( ( nbseg_diff>0)&&(nbseg_diff<13))
|
|
dib8000_write_word(state, 187, (dib8000_read_word(state, 187) & 0xfffb) | (1 << 3)); */
|
|
|
|
dib8000_write_word(state, 189, ~seg_mask13 | seg_diff_mask); /* P_lmod4_seg_inh */
|
|
dib8000_write_word(state, 192, ~seg_mask13 | seg_diff_mask); /* P_pha3_seg_inh */
|
|
dib8000_write_word(state, 225, ~seg_mask13 | seg_diff_mask); /* P_tac_seg_inh */
|
|
if ((!state->fe.dtv_property_cache.isdbt_sb_mode) && (state->cfg.pll->ifreq == 0))
|
|
dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask | 0x40); /* P_equal_noise_seg_inh */
|
|
else
|
|
dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask); /* P_equal_noise_seg_inh */
|
|
dib8000_write_word(state, 287, ~seg_mask13 | 0x1000); /* P_tmcc_seg_inh */
|
|
//dib8000_write_word(state, 288, ~seg_mask13 | seg_diff_mask); /* P_tmcc_seg_eq_inh */
|
|
if (!autosearching)
|
|
dib8000_write_word(state, 288, (~seg_mask13 | seg_diff_mask) & 0x1fff); /* P_tmcc_seg_eq_inh */
|
|
else
|
|
dib8000_write_word(state, 288, 0x1fff); //disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels.
|
|
dprintk("287 = %X (%d)", ~seg_mask13 | 0x1000, ~seg_mask13 | 0x1000);
|
|
|
|
dib8000_write_word(state, 211, seg_mask13 & (~seg_diff_mask)); /* P_des_seg_enabled */
|
|
|
|
/* offset loop parameters */
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) // Sound Broadcasting mode 1 seg
|
|
/* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
|
|
dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x40);
|
|
|
|
else // Sound Broadcasting mode 3 seg
|
|
/* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */
|
|
dib8000_write_word(state, 32, ((10 - mode) << 12) | (6 << 8) | 0x60);
|
|
} else
|
|
// TODO in 13 seg, timf_alpha can always be the same or not ?
|
|
/* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */
|
|
dib8000_write_word(state, 32, ((9 - mode) << 12) | (6 << 8) | 0x80);
|
|
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) // Sound Broadcasting mode 1 seg
|
|
/* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (11-P_mode) */
|
|
dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (10 - mode));
|
|
|
|
else // Sound Broadcasting mode 3 seg
|
|
/* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (10-P_mode) */
|
|
dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (9 - mode));
|
|
} else
|
|
/* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = 9 */
|
|
dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (8 - mode));
|
|
|
|
/* P_dvsy_sync_wait - reuse mode */
|
|
switch (state->fe.dtv_property_cache.transmission_mode) {
|
|
case TRANSMISSION_MODE_8K:
|
|
mode = 256;
|
|
break;
|
|
case TRANSMISSION_MODE_4K:
|
|
mode = 128;
|
|
break;
|
|
default:
|
|
case TRANSMISSION_MODE_2K:
|
|
mode = 64;
|
|
break;
|
|
}
|
|
if (state->cfg.diversity_delay == 0)
|
|
mode = (mode * (1 << (guard)) * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo
|
|
else
|
|
mode = (mode * (1 << (guard)) * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for DVSY-fifo
|
|
mode <<= 4;
|
|
dib8000_write_word(state, 273, (dib8000_read_word(state, 273) & 0x000f) | mode);
|
|
|
|
/* channel estimation fine configuration */
|
|
switch (max_constellation) {
|
|
case QAM_64:
|
|
ana_gain = 0x7; // -1 : avoid def_est saturation when ADC target is -16dB
|
|
coeff[0] = 0x0148; /* P_adp_regul_cnt 0.04 */
|
|
coeff[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */
|
|
coeff[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
|
|
coeff[3] = 0xfff8; /* P_adp_noise_ext -0.001 */
|
|
//if (!state->cfg.hostbus_diversity) //if diversity, we should prehaps use the configuration of the max_constallation -1
|
|
break;
|
|
case QAM_16:
|
|
ana_gain = 0x7; // -1 : avoid def_est saturation when ADC target is -16dB
|
|
coeff[0] = 0x023d; /* P_adp_regul_cnt 0.07 */
|
|
coeff[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */
|
|
coeff[2] = 0x00a4; /* P_adp_regul_ext 0.02 */
|
|
coeff[3] = 0xfff0; /* P_adp_noise_ext -0.002 */
|
|
//if (!((state->cfg.hostbus_diversity) && (max_constellation == QAM_16)))
|
|
break;
|
|
default:
|
|
ana_gain = 0; // 0 : goes along with ADC target at -22dB to keep good mobile performance and lock at sensitivity level
|
|
coeff[0] = 0x099a; /* P_adp_regul_cnt 0.3 */
|
|
coeff[1] = 0xffae; /* P_adp_noise_cnt -0.01 */
|
|
coeff[2] = 0x0333; /* P_adp_regul_ext 0.1 */
|
|
coeff[3] = 0xfff8; /* P_adp_noise_ext -0.002 */
|
|
break;
|
|
}
|
|
for (mode = 0; mode < 4; mode++)
|
|
dib8000_write_word(state, 215 + mode, coeff[mode]);
|
|
|
|
// update ana_gain depending on max constellation
|
|
dib8000_write_word(state, 116, ana_gain);
|
|
// update ADC target depending on ana_gain
|
|
if (ana_gain) { // set -16dB ADC target for ana_gain=-1
|
|
for (i = 0; i < 10; i++)
|
|
dib8000_write_word(state, 80 + i, adc_target_16dB[i]);
|
|
} else { // set -22dB ADC target for ana_gain=0
|
|
for (i = 0; i < 10; i++)
|
|
dib8000_write_word(state, 80 + i, adc_target_16dB[i] - 355);
|
|
}
|
|
|
|
// ---- ANA_FE ----
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode) {
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 1) // 3-segments
|
|
ana_fe = ana_fe_coeff_3seg;
|
|
else // 1-segment
|
|
ana_fe = ana_fe_coeff_1seg;
|
|
} else
|
|
ana_fe = ana_fe_coeff_13seg;
|
|
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 || state->isdbt_cfg_loaded == 0)
|
|
for (mode = 0; mode < 24; mode++)
|
|
dib8000_write_word(state, 117 + mode, ana_fe[mode]);
|
|
|
|
// ---- CHAN_BLK ----
|
|
for (i = 0; i < 13; i++) {
|
|
if ((((~seg_diff_mask) >> i) & 1) == 1) {
|
|
P_cfr_left_edge += (1 << i) * ((i == 0) || ((((seg_mask13 & (~seg_diff_mask)) >> (i - 1)) & 1) == 0));
|
|
P_cfr_right_edge += (1 << i) * ((i == 12) || ((((seg_mask13 & (~seg_diff_mask)) >> (i + 1)) & 1) == 0));
|
|
}
|
|
}
|
|
dib8000_write_word(state, 222, P_cfr_left_edge); // P_cfr_left_edge
|
|
dib8000_write_word(state, 223, P_cfr_right_edge); // P_cfr_right_edge
|
|
// "P_cspu_left_edge" not used => do not care
|
|
// "P_cspu_right_edge" not used => do not care
|
|
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { // ISDB-Tsb
|
|
dib8000_write_word(state, 228, 1); // P_2d_mode_byp=1
|
|
dib8000_write_word(state, 205, dib8000_read_word(state, 205) & 0xfff0); // P_cspu_win_cut = 0
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0 // 1-segment
|
|
&& state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K) {
|
|
//dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); // P_adp_pass = 0
|
|
dib8000_write_word(state, 265, 15); // P_equal_noise_sel = 15
|
|
}
|
|
} else if (state->isdbt_cfg_loaded == 0) {
|
|
dib8000_write_word(state, 228, 0); // default value
|
|
dib8000_write_word(state, 265, 31); // default value
|
|
dib8000_write_word(state, 205, 0x200f); // init value
|
|
}
|
|
// ---- TMCC ----
|
|
for (i = 0; i < 3; i++)
|
|
tmcc_pow +=
|
|
(((state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * 4 + 1) * state->fe.dtv_property_cache.layer[i].segment_count);
|
|
// Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9);
|
|
// Threshold is set at 1/4 of max power.
|
|
tmcc_pow *= (1 << (9 - 2));
|
|
|
|
dib8000_write_word(state, 290, tmcc_pow); // P_tmcc_dec_thres_2k
|
|
dib8000_write_word(state, 291, tmcc_pow); // P_tmcc_dec_thres_4k
|
|
dib8000_write_word(state, 292, tmcc_pow); // P_tmcc_dec_thres_8k
|
|
//dib8000_write_word(state, 287, (1 << 13) | 0x1000 );
|
|
// ---- PHA3 ----
|
|
|
|
if (state->isdbt_cfg_loaded == 0)
|
|
dib8000_write_word(state, 250, 3285); /*p_2d_hspeed_thr0 */
|
|
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1)
|
|
state->isdbt_cfg_loaded = 0;
|
|
else
|
|
state->isdbt_cfg_loaded = 1;
|
|
|
|
}
|
|
|
|
static int dib8000_autosearch_start(struct dvb_frontend *fe)
|
|
{
|
|
u8 factor;
|
|
u32 value;
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
|
|
int slist = 0;
|
|
|
|
state->fe.dtv_property_cache.inversion = 0;
|
|
if (!state->fe.dtv_property_cache.isdbt_sb_mode)
|
|
state->fe.dtv_property_cache.layer[0].segment_count = 13;
|
|
state->fe.dtv_property_cache.layer[0].modulation = QAM_64;
|
|
state->fe.dtv_property_cache.layer[0].fec = FEC_2_3;
|
|
state->fe.dtv_property_cache.layer[0].interleaving = 0;
|
|
|
|
//choose the right list, in sb, always do everything
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode) {
|
|
state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
|
|
state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
|
|
slist = 7;
|
|
dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13));
|
|
} else {
|
|
if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) {
|
|
if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
|
|
slist = 7;
|
|
dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1 to have autosearch start ok with mode2
|
|
} else
|
|
slist = 3;
|
|
} else {
|
|
if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) {
|
|
slist = 2;
|
|
dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1
|
|
} else
|
|
slist = 0;
|
|
}
|
|
|
|
if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO)
|
|
state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
|
|
if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO)
|
|
state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
|
|
|
|
dprintk("using list for autosearch : %d", slist);
|
|
dib8000_set_channel(state, (unsigned char)slist, 1);
|
|
//dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1
|
|
|
|
factor = 1;
|
|
|
|
//set lock_mask values
|
|
dib8000_write_word(state, 6, 0x4);
|
|
dib8000_write_word(state, 7, 0x8);
|
|
dib8000_write_word(state, 8, 0x1000);
|
|
|
|
//set lock_mask wait time values
|
|
value = 50 * state->cfg.pll->internal * factor;
|
|
dib8000_write_word(state, 11, (u16) ((value >> 16) & 0xffff)); // lock0 wait time
|
|
dib8000_write_word(state, 12, (u16) (value & 0xffff)); // lock0 wait time
|
|
value = 100 * state->cfg.pll->internal * factor;
|
|
dib8000_write_word(state, 13, (u16) ((value >> 16) & 0xffff)); // lock1 wait time
|
|
dib8000_write_word(state, 14, (u16) (value & 0xffff)); // lock1 wait time
|
|
value = 1000 * state->cfg.pll->internal * factor;
|
|
dib8000_write_word(state, 15, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
|
|
dib8000_write_word(state, 16, (u16) (value & 0xffff)); // lock2 wait time
|
|
|
|
value = dib8000_read_word(state, 0);
|
|
dib8000_write_word(state, 0, (u16) ((1 << 15) | value));
|
|
dib8000_read_word(state, 1284); // reset the INT. n_irq_pending
|
|
dib8000_write_word(state, 0, (u16) value);
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_autosearch_irq(struct dvb_frontend *fe)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
u16 irq_pending = dib8000_read_word(state, 1284);
|
|
|
|
if (irq_pending & 0x1) { // failed
|
|
dprintk("dib8000_autosearch_irq failed");
|
|
return 1;
|
|
}
|
|
|
|
if (irq_pending & 0x2) { // succeeded
|
|
dprintk("dib8000_autosearch_irq succeeded");
|
|
return 2;
|
|
}
|
|
|
|
return 0; // still pending
|
|
}
|
|
|
|
static int dib8000_tune(struct dvb_frontend *fe)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
int ret = 0;
|
|
u16 value, mode = fft_to_mode(state);
|
|
|
|
// we are already tuned - just resuming from suspend
|
|
if (state == NULL)
|
|
return -EINVAL;
|
|
|
|
dib8000_set_bandwidth(state, state->fe.dtv_property_cache.bandwidth_hz / 1000);
|
|
dib8000_set_channel(state, 0, 0);
|
|
|
|
// restart demod
|
|
ret |= dib8000_write_word(state, 770, 0x4000);
|
|
ret |= dib8000_write_word(state, 770, 0x0000);
|
|
msleep(45);
|
|
|
|
/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3 */
|
|
/* ret |= dib8000_write_word(state, 29, (0 << 9) | (4 << 5) | (0 << 4) | (3 << 0) ); workaround inh_isi stays at 1 */
|
|
|
|
// never achieved a lock before - wait for timfreq to update
|
|
if (state->timf == 0) {
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) // Sound Broadcasting mode 1 seg
|
|
msleep(300);
|
|
else // Sound Broadcasting mode 3 seg
|
|
msleep(500);
|
|
} else // 13 seg
|
|
msleep(200);
|
|
}
|
|
//dump_reg(state);
|
|
if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) {
|
|
if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // Sound Broadcasting mode 1 seg
|
|
|
|
/* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40 alpha to check on board */
|
|
dib8000_write_word(state, 32, ((13 - mode) << 12) | (6 << 8) | 0x40);
|
|
//dib8000_write_word(state, 32, (8 << 12) | (6 << 8) | 0x80);
|
|
|
|
/* P_ctrl_sfreq_step= (12-P_mode) P_ctrl_sfreq_inh =0 P_ctrl_pha_off_max */
|
|
ret |= dib8000_write_word(state, 37, (12 - mode) | ((5 + mode) << 5));
|
|
|
|
} else { // Sound Broadcasting mode 3 seg
|
|
|
|
/* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60 alpha to check on board */
|
|
dib8000_write_word(state, 32, ((12 - mode) << 12) | (6 << 8) | 0x60);
|
|
|
|
ret |= dib8000_write_word(state, 37, (11 - mode) | ((5 + mode) << 5));
|
|
}
|
|
|
|
} else { // 13 seg
|
|
/* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80 alpha to check on board */
|
|
dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x80);
|
|
|
|
ret |= dib8000_write_word(state, 37, (10 - mode) | ((5 + mode) << 5));
|
|
|
|
}
|
|
|
|
// we achieved a coff_cpil_lock - it's time to update the timf
|
|
if ((dib8000_read_word(state, 568) >> 11) & 0x1)
|
|
dib8000_update_timf(state);
|
|
|
|
//now that tune is finished, lock0 should lock on fec_mpeg to output this lock on MP_LOCK. It's changed in autosearch start
|
|
dib8000_write_word(state, 6, 0x200);
|
|
|
|
if (state->revision == 0x8002) {
|
|
value = dib8000_read_word(state, 903);
|
|
dib8000_write_word(state, 903, value & ~(1 << 3));
|
|
msleep(1);
|
|
dib8000_write_word(state, 903, value | (1 << 3));
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dib8000_wakeup(struct dvb_frontend *fe)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
|
|
dib8000_set_power_mode(state, DIB8000M_POWER_ALL);
|
|
dib8000_set_adc_state(state, DIBX000_ADC_ON);
|
|
if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
|
|
dprintk("could not start Slow ADC");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct dib8000_state *st = fe->demodulator_priv;
|
|
if (1) {
|
|
dib8000_set_output_mode(st, OUTMODE_HIGH_Z);
|
|
dib8000_set_power_mode(st, DIB8000M_POWER_INTERFACE_ONLY);
|
|
return dib8000_set_adc_state(st, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(st, DIBX000_ADC_OFF);
|
|
} else {
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int dib8000_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
u16 i, val = 0;
|
|
|
|
fe->dtv_property_cache.bandwidth_hz = 6000000;
|
|
|
|
fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1;
|
|
|
|
val = dib8000_read_word(state, 570);
|
|
fe->dtv_property_cache.inversion = (val & 0x40) >> 6;
|
|
switch ((val & 0x30) >> 4) {
|
|
case 1:
|
|
fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K;
|
|
break;
|
|
case 3:
|
|
default:
|
|
fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K;
|
|
break;
|
|
}
|
|
|
|
switch (val & 0x3) {
|
|
case 0:
|
|
fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32;
|
|
dprintk("dib8000_get_frontend GI = 1/32 ");
|
|
break;
|
|
case 1:
|
|
fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16;
|
|
dprintk("dib8000_get_frontend GI = 1/16 ");
|
|
break;
|
|
case 2:
|
|
dprintk("dib8000_get_frontend GI = 1/8 ");
|
|
fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8;
|
|
break;
|
|
case 3:
|
|
dprintk("dib8000_get_frontend GI = 1/4 ");
|
|
fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4;
|
|
break;
|
|
}
|
|
|
|
val = dib8000_read_word(state, 505);
|
|
fe->dtv_property_cache.isdbt_partial_reception = val & 1;
|
|
dprintk("dib8000_get_frontend : partial_reception = %d ", fe->dtv_property_cache.isdbt_partial_reception);
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
val = dib8000_read_word(state, 493 + i);
|
|
fe->dtv_property_cache.layer[i].segment_count = val & 0x0F;
|
|
dprintk("dib8000_get_frontend : Layer %d segments = %d ", i, fe->dtv_property_cache.layer[i].segment_count);
|
|
|
|
val = dib8000_read_word(state, 499 + i);
|
|
fe->dtv_property_cache.layer[i].interleaving = val & 0x3;
|
|
dprintk("dib8000_get_frontend : Layer %d time_intlv = %d ", i, fe->dtv_property_cache.layer[i].interleaving);
|
|
|
|
val = dib8000_read_word(state, 481 + i);
|
|
switch (val & 0x7) {
|
|
case 1:
|
|
fe->dtv_property_cache.layer[i].fec = FEC_1_2;
|
|
dprintk("dib8000_get_frontend : Layer %d Code Rate = 1/2 ", i);
|
|
break;
|
|
case 2:
|
|
fe->dtv_property_cache.layer[i].fec = FEC_2_3;
|
|
dprintk("dib8000_get_frontend : Layer %d Code Rate = 2/3 ", i);
|
|
break;
|
|
case 3:
|
|
fe->dtv_property_cache.layer[i].fec = FEC_3_4;
|
|
dprintk("dib8000_get_frontend : Layer %d Code Rate = 3/4 ", i);
|
|
break;
|
|
case 5:
|
|
fe->dtv_property_cache.layer[i].fec = FEC_5_6;
|
|
dprintk("dib8000_get_frontend : Layer %d Code Rate = 5/6 ", i);
|
|
break;
|
|
default:
|
|
fe->dtv_property_cache.layer[i].fec = FEC_7_8;
|
|
dprintk("dib8000_get_frontend : Layer %d Code Rate = 7/8 ", i);
|
|
break;
|
|
}
|
|
|
|
val = dib8000_read_word(state, 487 + i);
|
|
switch (val & 0x3) {
|
|
case 0:
|
|
dprintk("dib8000_get_frontend : Layer %d DQPSK ", i);
|
|
fe->dtv_property_cache.layer[i].modulation = DQPSK;
|
|
break;
|
|
case 1:
|
|
fe->dtv_property_cache.layer[i].modulation = QPSK;
|
|
dprintk("dib8000_get_frontend : Layer %d QPSK ", i);
|
|
break;
|
|
case 2:
|
|
fe->dtv_property_cache.layer[i].modulation = QAM_16;
|
|
dprintk("dib8000_get_frontend : Layer %d QAM16 ", i);
|
|
break;
|
|
case 3:
|
|
default:
|
|
dprintk("dib8000_get_frontend : Layer %d QAM64 ", i);
|
|
fe->dtv_property_cache.layer[i].modulation = QAM_64;
|
|
break;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
int time, ret;
|
|
|
|
dib8000_set_output_mode(state, OUTMODE_HIGH_Z);
|
|
|
|
if (fe->ops.tuner_ops.set_params)
|
|
fe->ops.tuner_ops.set_params(fe, fep);
|
|
|
|
/* start up the AGC */
|
|
state->tune_state = CT_AGC_START;
|
|
do {
|
|
time = dib8000_agc_startup(fe);
|
|
if (time != FE_CALLBACK_TIME_NEVER)
|
|
msleep(time / 10);
|
|
else
|
|
break;
|
|
} while (state->tune_state != CT_AGC_STOP);
|
|
|
|
if (state->fe.dtv_property_cache.frequency == 0) {
|
|
dprintk("dib8000: must at least specify frequency ");
|
|
return 0;
|
|
}
|
|
|
|
if (state->fe.dtv_property_cache.bandwidth_hz == 0) {
|
|
dprintk("dib8000: no bandwidth specified, set to default ");
|
|
state->fe.dtv_property_cache.bandwidth_hz = 6000000;
|
|
}
|
|
|
|
state->tune_state = CT_DEMOD_START;
|
|
|
|
if ((state->fe.dtv_property_cache.delivery_system != SYS_ISDBT) ||
|
|
(state->fe.dtv_property_cache.inversion == INVERSION_AUTO) ||
|
|
(state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) ||
|
|
(state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) ||
|
|
(((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) != 0) &&
|
|
(state->fe.dtv_property_cache.layer[0].segment_count != 0xff) &&
|
|
(state->fe.dtv_property_cache.layer[0].segment_count != 0) &&
|
|
((state->fe.dtv_property_cache.layer[0].modulation == QAM_AUTO) ||
|
|
(state->fe.dtv_property_cache.layer[0].fec == FEC_AUTO))) ||
|
|
(((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 1)) != 0) &&
|
|
(state->fe.dtv_property_cache.layer[1].segment_count != 0xff) &&
|
|
(state->fe.dtv_property_cache.layer[1].segment_count != 0) &&
|
|
((state->fe.dtv_property_cache.layer[1].modulation == QAM_AUTO) ||
|
|
(state->fe.dtv_property_cache.layer[1].fec == FEC_AUTO))) ||
|
|
(((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 2)) != 0) &&
|
|
(state->fe.dtv_property_cache.layer[2].segment_count != 0xff) &&
|
|
(state->fe.dtv_property_cache.layer[2].segment_count != 0) &&
|
|
((state->fe.dtv_property_cache.layer[2].modulation == QAM_AUTO) ||
|
|
(state->fe.dtv_property_cache.layer[2].fec == FEC_AUTO))) ||
|
|
(((state->fe.dtv_property_cache.layer[0].segment_count == 0) ||
|
|
((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) == 0)) &&
|
|
((state->fe.dtv_property_cache.layer[1].segment_count == 0) ||
|
|
((state->fe.dtv_property_cache.isdbt_layer_enabled & (2 << 0)) == 0)) &&
|
|
((state->fe.dtv_property_cache.layer[2].segment_count == 0) || ((state->fe.dtv_property_cache.isdbt_layer_enabled & (3 << 0)) == 0)))) {
|
|
int i = 800, found;
|
|
|
|
dib8000_set_bandwidth(state, fe->dtv_property_cache.bandwidth_hz / 1000);
|
|
dib8000_autosearch_start(fe);
|
|
do {
|
|
msleep(10);
|
|
found = dib8000_autosearch_irq(fe);
|
|
} while (found == 0 && i--);
|
|
|
|
dprintk("Frequency %d Hz, autosearch returns: %d", fep->frequency, found);
|
|
|
|
if (found == 0 || found == 1)
|
|
return 0; // no channel found
|
|
|
|
dib8000_get_frontend(fe, fep);
|
|
}
|
|
|
|
ret = dib8000_tune(fe);
|
|
|
|
/* make this a config parameter */
|
|
dib8000_set_output_mode(state, state->cfg.output_mode);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
u16 lock = dib8000_read_word(state, 568);
|
|
|
|
*stat = 0;
|
|
|
|
if ((lock >> 14) & 1) // AGC
|
|
*stat |= FE_HAS_SIGNAL;
|
|
|
|
if ((lock >> 8) & 1) // Equal
|
|
*stat |= FE_HAS_CARRIER;
|
|
|
|
if ((lock >> 3) & 1) // TMCC_SYNC
|
|
*stat |= FE_HAS_SYNC;
|
|
|
|
if ((lock >> 5) & 7) // FEC MPEG
|
|
*stat |= FE_HAS_LOCK;
|
|
|
|
lock = dib8000_read_word(state, 554); // Viterbi Layer A
|
|
if (lock & 0x01)
|
|
*stat |= FE_HAS_VITERBI;
|
|
|
|
lock = dib8000_read_word(state, 555); // Viterbi Layer B
|
|
if (lock & 0x01)
|
|
*stat |= FE_HAS_VITERBI;
|
|
|
|
lock = dib8000_read_word(state, 556); // Viterbi Layer C
|
|
if (lock & 0x01)
|
|
*stat |= FE_HAS_VITERBI;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
*ber = (dib8000_read_word(state, 560) << 16) | dib8000_read_word(state, 561); // 13 segments
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
*unc = dib8000_read_word(state, 565); // packet error on 13 seg
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_read_signal_strength(struct dvb_frontend *fe, u16 * strength)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
u16 val = dib8000_read_word(state, 390);
|
|
*strength = 65535 - val;
|
|
return 0;
|
|
}
|
|
|
|
static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr)
|
|
{
|
|
struct dib8000_state *state = fe->demodulator_priv;
|
|
u16 val;
|
|
s32 signal_mant, signal_exp, noise_mant, noise_exp;
|
|
u32 result = 0;
|
|
|
|
val = dib8000_read_word(state, 542);
|
|
noise_mant = (val >> 6) & 0xff;
|
|
noise_exp = (val & 0x3f);
|
|
|
|
val = dib8000_read_word(state, 543);
|
|
signal_mant = (val >> 6) & 0xff;
|
|
signal_exp = (val & 0x3f);
|
|
|
|
if ((noise_exp & 0x20) != 0)
|
|
noise_exp -= 0x40;
|
|
if ((signal_exp & 0x20) != 0)
|
|
signal_exp -= 0x40;
|
|
|
|
if (signal_mant != 0)
|
|
result = intlog10(2) * 10 * signal_exp + 10 * intlog10(signal_mant);
|
|
else
|
|
result = intlog10(2) * 10 * signal_exp - 100;
|
|
if (noise_mant != 0)
|
|
result -= intlog10(2) * 10 * noise_exp + 10 * intlog10(noise_mant);
|
|
else
|
|
result -= intlog10(2) * 10 * noise_exp - 100;
|
|
|
|
*snr = result / (1 << 24);
|
|
return 0;
|
|
}
|
|
|
|
int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr)
|
|
{
|
|
int k = 0;
|
|
u8 new_addr = 0;
|
|
struct i2c_device client = {.adap = host };
|
|
|
|
for (k = no_of_demods - 1; k >= 0; k--) {
|
|
/* designated i2c address */
|
|
new_addr = first_addr + (k << 1);
|
|
|
|
client.addr = new_addr;
|
|
dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */
|
|
if (dib8000_identify(&client) == 0) {
|
|
dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */
|
|
client.addr = default_addr;
|
|
if (dib8000_identify(&client) == 0) {
|
|
dprintk("#%d: not identified", k);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* start diversity to pull_down div_str - just for i2c-enumeration */
|
|
dib8000_i2c_write16(&client, 1286, (1 << 10) | (4 << 6));
|
|
|
|
/* set new i2c address and force divstart */
|
|
dib8000_i2c_write16(&client, 1285, (new_addr << 2) | 0x2);
|
|
client.addr = new_addr;
|
|
dib8000_identify(&client);
|
|
|
|
dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr);
|
|
}
|
|
|
|
for (k = 0; k < no_of_demods; k++) {
|
|
new_addr = first_addr | (k << 1);
|
|
client.addr = new_addr;
|
|
|
|
// unforce divstr
|
|
dib8000_i2c_write16(&client, 1285, new_addr << 2);
|
|
|
|
/* deactivate div - it was just for i2c-enumeration */
|
|
dib8000_i2c_write16(&client, 1286, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL(dib8000_i2c_enumeration);
|
|
static int dib8000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune)
|
|
{
|
|
tune->min_delay_ms = 1000;
|
|
tune->step_size = 0;
|
|
tune->max_drift = 0;
|
|
return 0;
|
|
}
|
|
|
|
static void dib8000_release(struct dvb_frontend *fe)
|
|
{
|
|
struct dib8000_state *st = fe->demodulator_priv;
|
|
dibx000_exit_i2c_master(&st->i2c_master);
|
|
kfree(st);
|
|
}
|
|
|
|
struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating)
|
|
{
|
|
struct dib8000_state *st = fe->demodulator_priv;
|
|
return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
|
|
}
|
|
|
|
EXPORT_SYMBOL(dib8000_get_i2c_master);
|
|
|
|
static const struct dvb_frontend_ops dib8000_ops = {
|
|
.info = {
|
|
.name = "DiBcom 8000 ISDB-T",
|
|
.type = FE_OFDM,
|
|
.frequency_min = 44250000,
|
|
.frequency_max = 867250000,
|
|
.frequency_stepsize = 62500,
|
|
.caps = FE_CAN_INVERSION_AUTO |
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO,
|
|
},
|
|
|
|
.release = dib8000_release,
|
|
|
|
.init = dib8000_wakeup,
|
|
.sleep = dib8000_sleep,
|
|
|
|
.set_frontend = dib8000_set_frontend,
|
|
.get_tune_settings = dib8000_fe_get_tune_settings,
|
|
.get_frontend = dib8000_get_frontend,
|
|
|
|
.read_status = dib8000_read_status,
|
|
.read_ber = dib8000_read_ber,
|
|
.read_signal_strength = dib8000_read_signal_strength,
|
|
.read_snr = dib8000_read_snr,
|
|
.read_ucblocks = dib8000_read_unc_blocks,
|
|
};
|
|
|
|
struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg)
|
|
{
|
|
struct dvb_frontend *fe;
|
|
struct dib8000_state *state;
|
|
|
|
dprintk("dib8000_attach");
|
|
|
|
state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return NULL;
|
|
|
|
memcpy(&state->cfg, cfg, sizeof(struct dib8000_config));
|
|
state->i2c.adap = i2c_adap;
|
|
state->i2c.addr = i2c_addr;
|
|
state->gpio_val = cfg->gpio_val;
|
|
state->gpio_dir = cfg->gpio_dir;
|
|
|
|
/* Ensure the output mode remains at the previous default if it's
|
|
* not specifically set by the caller.
|
|
*/
|
|
if ((state->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (state->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
|
|
state->cfg.output_mode = OUTMODE_MPEG2_FIFO;
|
|
|
|
fe = &state->fe;
|
|
fe->demodulator_priv = state;
|
|
memcpy(&state->fe.ops, &dib8000_ops, sizeof(struct dvb_frontend_ops));
|
|
|
|
state->timf_default = cfg->pll->timf;
|
|
|
|
if (dib8000_identify(&state->i2c) == 0)
|
|
goto error;
|
|
|
|
dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr);
|
|
|
|
dib8000_reset(fe);
|
|
|
|
dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); /* ber_rs_len = 3 */
|
|
|
|
return fe;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
EXPORT_SYMBOL(dib8000_attach);
|
|
|
|
MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@dibcom.fr, " "Patrick Boettcher <pboettcher@dibcom.fr>");
|
|
MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator");
|
|
MODULE_LICENSE("GPL");
|