mirror of https://gitee.com/openkylin/linux.git
314 lines
7.7 KiB
C
314 lines
7.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* PCIe host controller driver for ST Microelectronics SPEAr13xx SoCs
|
|
*
|
|
* SPEAr13xx PCIe Glue Layer Source Code
|
|
*
|
|
* Copyright (C) 2010-2014 ST Microelectronics
|
|
* Pratyush Anand <pratyush.anand@gmail.com>
|
|
* Mohit Kumar <mohit.kumar.dhaka@gmail.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/resource.h>
|
|
|
|
#include "pcie-designware.h"
|
|
|
|
struct spear13xx_pcie {
|
|
struct dw_pcie *pci;
|
|
void __iomem *app_base;
|
|
struct phy *phy;
|
|
struct clk *clk;
|
|
bool is_gen1;
|
|
};
|
|
|
|
struct pcie_app_reg {
|
|
u32 app_ctrl_0; /* cr0 */
|
|
u32 app_ctrl_1; /* cr1 */
|
|
u32 app_status_0; /* cr2 */
|
|
u32 app_status_1; /* cr3 */
|
|
u32 msg_status; /* cr4 */
|
|
u32 msg_payload; /* cr5 */
|
|
u32 int_sts; /* cr6 */
|
|
u32 int_clr; /* cr7 */
|
|
u32 int_mask; /* cr8 */
|
|
u32 mst_bmisc; /* cr9 */
|
|
u32 phy_ctrl; /* cr10 */
|
|
u32 phy_status; /* cr11 */
|
|
u32 cxpl_debug_info_0; /* cr12 */
|
|
u32 cxpl_debug_info_1; /* cr13 */
|
|
u32 ven_msg_ctrl_0; /* cr14 */
|
|
u32 ven_msg_ctrl_1; /* cr15 */
|
|
u32 ven_msg_data_0; /* cr16 */
|
|
u32 ven_msg_data_1; /* cr17 */
|
|
u32 ven_msi_0; /* cr18 */
|
|
u32 ven_msi_1; /* cr19 */
|
|
u32 mst_rmisc; /* cr20 */
|
|
};
|
|
|
|
/* CR0 ID */
|
|
#define APP_LTSSM_ENABLE_ID 3
|
|
#define DEVICE_TYPE_RC (4 << 25)
|
|
#define MISCTRL_EN_ID 30
|
|
#define REG_TRANSLATION_ENABLE 31
|
|
|
|
/* CR3 ID */
|
|
#define XMLH_LINK_UP (1 << 6)
|
|
|
|
/* CR6 */
|
|
#define MSI_CTRL_INT (1 << 26)
|
|
|
|
#define EXP_CAP_ID_OFFSET 0x70
|
|
|
|
#define to_spear13xx_pcie(x) dev_get_drvdata((x)->dev)
|
|
|
|
static int spear13xx_pcie_establish_link(struct spear13xx_pcie *spear13xx_pcie)
|
|
{
|
|
struct dw_pcie *pci = spear13xx_pcie->pci;
|
|
struct pcie_port *pp = &pci->pp;
|
|
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
|
|
u32 val;
|
|
u32 exp_cap_off = EXP_CAP_ID_OFFSET;
|
|
|
|
if (dw_pcie_link_up(pci)) {
|
|
dev_err(pci->dev, "link already up\n");
|
|
return 0;
|
|
}
|
|
|
|
dw_pcie_setup_rc(pp);
|
|
|
|
/*
|
|
* this controller support only 128 bytes read size, however its
|
|
* default value in capability register is 512 bytes. So force
|
|
* it to 128 here.
|
|
*/
|
|
dw_pcie_read(pci->dbi_base + exp_cap_off + PCI_EXP_DEVCTL, 2, &val);
|
|
val &= ~PCI_EXP_DEVCTL_READRQ;
|
|
dw_pcie_write(pci->dbi_base + exp_cap_off + PCI_EXP_DEVCTL, 2, val);
|
|
|
|
dw_pcie_write(pci->dbi_base + PCI_VENDOR_ID, 2, 0x104A);
|
|
dw_pcie_write(pci->dbi_base + PCI_DEVICE_ID, 2, 0xCD80);
|
|
|
|
/*
|
|
* if is_gen1 is set then handle it, so that some buggy card
|
|
* also works
|
|
*/
|
|
if (spear13xx_pcie->is_gen1) {
|
|
dw_pcie_read(pci->dbi_base + exp_cap_off + PCI_EXP_LNKCAP,
|
|
4, &val);
|
|
if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
|
|
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
|
|
val |= PCI_EXP_LNKCAP_SLS_2_5GB;
|
|
dw_pcie_write(pci->dbi_base + exp_cap_off +
|
|
PCI_EXP_LNKCAP, 4, val);
|
|
}
|
|
|
|
dw_pcie_read(pci->dbi_base + exp_cap_off + PCI_EXP_LNKCTL2,
|
|
2, &val);
|
|
if ((val & PCI_EXP_LNKCAP_SLS) != PCI_EXP_LNKCAP_SLS_2_5GB) {
|
|
val &= ~((u32)PCI_EXP_LNKCAP_SLS);
|
|
val |= PCI_EXP_LNKCAP_SLS_2_5GB;
|
|
dw_pcie_write(pci->dbi_base + exp_cap_off +
|
|
PCI_EXP_LNKCTL2, 2, val);
|
|
}
|
|
}
|
|
|
|
/* enable ltssm */
|
|
writel(DEVICE_TYPE_RC | (1 << MISCTRL_EN_ID)
|
|
| (1 << APP_LTSSM_ENABLE_ID)
|
|
| ((u32)1 << REG_TRANSLATION_ENABLE),
|
|
&app_reg->app_ctrl_0);
|
|
|
|
return dw_pcie_wait_for_link(pci);
|
|
}
|
|
|
|
static irqreturn_t spear13xx_pcie_irq_handler(int irq, void *arg)
|
|
{
|
|
struct spear13xx_pcie *spear13xx_pcie = arg;
|
|
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
|
|
struct dw_pcie *pci = spear13xx_pcie->pci;
|
|
struct pcie_port *pp = &pci->pp;
|
|
unsigned int status;
|
|
|
|
status = readl(&app_reg->int_sts);
|
|
|
|
if (status & MSI_CTRL_INT) {
|
|
BUG_ON(!IS_ENABLED(CONFIG_PCI_MSI));
|
|
dw_handle_msi_irq(pp);
|
|
}
|
|
|
|
writel(status, &app_reg->int_clr);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void spear13xx_pcie_enable_interrupts(struct spear13xx_pcie *spear13xx_pcie)
|
|
{
|
|
struct dw_pcie *pci = spear13xx_pcie->pci;
|
|
struct pcie_port *pp = &pci->pp;
|
|
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
|
|
|
|
/* Enable MSI interrupt */
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
dw_pcie_msi_init(pp);
|
|
writel(readl(&app_reg->int_mask) |
|
|
MSI_CTRL_INT, &app_reg->int_mask);
|
|
}
|
|
}
|
|
|
|
static int spear13xx_pcie_link_up(struct dw_pcie *pci)
|
|
{
|
|
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pci);
|
|
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
|
|
|
|
if (readl(&app_reg->app_status_1) & XMLH_LINK_UP)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spear13xx_pcie_host_init(struct pcie_port *pp)
|
|
{
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pci);
|
|
|
|
spear13xx_pcie_establish_link(spear13xx_pcie);
|
|
spear13xx_pcie_enable_interrupts(spear13xx_pcie);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_pcie_host_ops spear13xx_pcie_host_ops = {
|
|
.host_init = spear13xx_pcie_host_init,
|
|
};
|
|
|
|
static int spear13xx_add_pcie_port(struct spear13xx_pcie *spear13xx_pcie,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct dw_pcie *pci = spear13xx_pcie->pci;
|
|
struct pcie_port *pp = &pci->pp;
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
pp->irq = platform_get_irq(pdev, 0);
|
|
if (pp->irq < 0) {
|
|
dev_err(dev, "failed to get irq\n");
|
|
return pp->irq;
|
|
}
|
|
ret = devm_request_irq(dev, pp->irq, spear13xx_pcie_irq_handler,
|
|
IRQF_SHARED | IRQF_NO_THREAD,
|
|
"spear1340-pcie", spear13xx_pcie);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request irq %d\n", pp->irq);
|
|
return ret;
|
|
}
|
|
|
|
pp->ops = &spear13xx_pcie_host_ops;
|
|
|
|
ret = dw_pcie_host_init(pp);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize host\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_pcie_ops dw_pcie_ops = {
|
|
.link_up = spear13xx_pcie_link_up,
|
|
};
|
|
|
|
static int spear13xx_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct dw_pcie *pci;
|
|
struct spear13xx_pcie *spear13xx_pcie;
|
|
struct device_node *np = dev->of_node;
|
|
struct resource *dbi_base;
|
|
int ret;
|
|
|
|
spear13xx_pcie = devm_kzalloc(dev, sizeof(*spear13xx_pcie), GFP_KERNEL);
|
|
if (!spear13xx_pcie)
|
|
return -ENOMEM;
|
|
|
|
pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
|
|
if (!pci)
|
|
return -ENOMEM;
|
|
|
|
pci->dev = dev;
|
|
pci->ops = &dw_pcie_ops;
|
|
|
|
spear13xx_pcie->pci = pci;
|
|
|
|
spear13xx_pcie->phy = devm_phy_get(dev, "pcie-phy");
|
|
if (IS_ERR(spear13xx_pcie->phy)) {
|
|
ret = PTR_ERR(spear13xx_pcie->phy);
|
|
if (ret == -EPROBE_DEFER)
|
|
dev_info(dev, "probe deferred\n");
|
|
else
|
|
dev_err(dev, "couldn't get pcie-phy\n");
|
|
return ret;
|
|
}
|
|
|
|
phy_init(spear13xx_pcie->phy);
|
|
|
|
spear13xx_pcie->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(spear13xx_pcie->clk)) {
|
|
dev_err(dev, "couldn't get clk for pcie\n");
|
|
return PTR_ERR(spear13xx_pcie->clk);
|
|
}
|
|
ret = clk_prepare_enable(spear13xx_pcie->clk);
|
|
if (ret) {
|
|
dev_err(dev, "couldn't enable clk for pcie\n");
|
|
return ret;
|
|
}
|
|
|
|
dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
|
|
pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
|
|
if (IS_ERR(pci->dbi_base)) {
|
|
dev_err(dev, "couldn't remap dbi base %p\n", dbi_base);
|
|
ret = PTR_ERR(pci->dbi_base);
|
|
goto fail_clk;
|
|
}
|
|
spear13xx_pcie->app_base = pci->dbi_base + 0x2000;
|
|
|
|
if (of_property_read_bool(np, "st,pcie-is-gen1"))
|
|
spear13xx_pcie->is_gen1 = true;
|
|
|
|
platform_set_drvdata(pdev, spear13xx_pcie);
|
|
|
|
ret = spear13xx_add_pcie_port(spear13xx_pcie, pdev);
|
|
if (ret < 0)
|
|
goto fail_clk;
|
|
|
|
return 0;
|
|
|
|
fail_clk:
|
|
clk_disable_unprepare(spear13xx_pcie->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id spear13xx_pcie_of_match[] = {
|
|
{ .compatible = "st,spear1340-pcie", },
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver spear13xx_pcie_driver = {
|
|
.probe = spear13xx_pcie_probe,
|
|
.driver = {
|
|
.name = "spear-pcie",
|
|
.of_match_table = of_match_ptr(spear13xx_pcie_of_match),
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
|
|
builtin_platform_driver(spear13xx_pcie_driver);
|