linux/arch/arm/mach-mmp/regs-usb.h

156 lines
4.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2011 Marvell International Ltd. All rights reserved.
*/
#ifndef __ASM_ARCH_REGS_USB_H
#define __ASM_ARCH_REGS_USB_H
#define PXA168_U2O_REGBASE (0xd4208000)
#define PXA168_U2O_PHYBASE (0xd4207000)
#define PXA168_U2H_REGBASE (0xd4209000)
#define PXA168_U2H_PHYBASE (0xd4206000)
#define MMP3_HSIC1_REGBASE (0xf0001000)
#define MMP3_HSIC1_PHYBASE (0xf0001800)
#define MMP3_HSIC2_REGBASE (0xf0002000)
#define MMP3_HSIC2_PHYBASE (0xf0002800)
#define MMP3_FSIC_REGBASE (0xf0003000)
#define MMP3_FSIC_PHYBASE (0xf0003800)
#define USB_REG_RANGE (0x1ff)
#define USB_PHY_RANGE (0xff)
/* registers */
#define U2x_CAPREGS_OFFSET 0x100
/* phy regs */
#define UTMI_REVISION 0x0
#define UTMI_CTRL 0x4
#define UTMI_PLL 0x8
#define UTMI_TX 0xc
#define UTMI_RX 0x10
#define UTMI_IVREF 0x14
#define UTMI_T0 0x18
#define UTMI_T1 0x1c
#define UTMI_T2 0x20
#define UTMI_T3 0x24
#define UTMI_T4 0x28
#define UTMI_T5 0x2c
#define UTMI_RESERVE 0x30
#define UTMI_USB_INT 0x34
#define UTMI_DBG_CTL 0x38
#define UTMI_OTG_ADDON 0x3c
/* For UTMICTRL Register */
#define UTMI_CTRL_USB_CLK_EN (1 << 31)
/* pxa168 */
#define UTMI_CTRL_SUSPEND_SET1 (1 << 30)
#define UTMI_CTRL_SUSPEND_SET2 (1 << 29)
#define UTMI_CTRL_RXBUF_PDWN (1 << 24)
#define UTMI_CTRL_TXBUF_PDWN (1 << 11)
#define UTMI_CTRL_INPKT_DELAY_SHIFT 30
#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28
#define UTMI_CTRL_PU_REF_SHIFT 20
#define UTMI_CTRL_ARC_PULLDN_SHIFT 12
#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1
#define UTMI_CTRL_PWR_UP_SHIFT 0
/* For UTMI_PLL Register */
#define UTMI_PLL_PLLCALI12_SHIFT 29
#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29)
#define UTMI_PLL_PLLVDD18_SHIFT 27
#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27)
#define UTMI_PLL_PLLVDD12_SHIFT 25
#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25)
#define UTMI_PLL_CLK_BLK_EN_SHIFT 24
#define CLK_BLK_EN (0x1 << 24)
#define PLL_READY (0x1 << 23)
#define KVCO_EXT (0x1 << 22)
#define VCOCAL_START (0x1 << 21)
#define UTMI_PLL_KVCO_SHIFT 15
#define UTMI_PLL_KVCO_MASK (0x7 << 15)
#define UTMI_PLL_ICP_SHIFT 12
#define UTMI_PLL_ICP_MASK (0x7 << 12)
#define UTMI_PLL_FBDIV_SHIFT 4
#define UTMI_PLL_FBDIV_MASK (0xFF << 4)
#define UTMI_PLL_REFDIV_SHIFT 0
#define UTMI_PLL_REFDIV_MASK (0xF << 0)
/* For UTMI_TX Register */
#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27
#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27)
#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26
#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26)
#define UTMI_TX_TXVDD12_SHIFT 22
#define UTMI_TX_TXVDD12_MASK (0x3 << 22)
#define UTMI_TX_CK60_PHSEL_SHIFT 17
#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17)
#define UTMI_TX_IMPCAL_VTH_SHIFT 14
#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14)
#define REG_RCAL_START (0x1 << 12)
#define UTMI_TX_LOW_VDD_EN_SHIFT 11
#define UTMI_TX_AMP_SHIFT 0
#define UTMI_TX_AMP_MASK (0x7 << 0)
/* For UTMI_RX Register */
#define UTMI_REG_SQ_LENGTH_SHIFT 15
#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15)
#define UTMI_RX_SQ_THRESH_SHIFT 4
#define UTMI_RX_SQ_THRESH_MASK (0xf << 4)
#define UTMI_OTG_ADDON_OTG_ON (1 << 0)
/* fsic registers */
#define FSIC_MISC 0x4
#define FSIC_INT 0x28
#define FSIC_CTRL 0x30
/* HSIC registers */
#define HSIC_PAD_CTRL 0x4
#define HSIC_CTRL 0x8
#define HSIC_CTRL_HSIC_ENABLE (1<<7)
#define HSIC_CTRL_PLL_BYPASS (1<<4)
#define TEST_GRP_0 0xc
#define TEST_GRP_1 0x10
#define HSIC_INT 0x14
#define HSIC_INT_READY_INT_EN (1<<10)
#define HSIC_INT_CONNECT_INT_EN (1<<9)
#define HSIC_INT_CORE_INT_EN (1<<8)
#define HSIC_INT_HS_READY (1<<2)
#define HSIC_INT_CONNECT (1<<1)
#define HSIC_INT_CORE (1<<0)
#define HSIC_CONFIG 0x18
#define USBHSIC_CTRL 0x20
#define HSIC_USB_CTRL 0x28
#define HSIC_USB_CTRL_CLKEN 1
#define HSIC_USB_CLK_PHY 0x0
#define HSIC_USB_CLK_PMU 0x1
#endif /* __ASM_ARCH_PXA_U2O_H */