mirror of https://gitee.com/openkylin/linux.git
1679 lines
49 KiB
C
1679 lines
49 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2010 Google, Inc.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/slot-gpio.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/ktime.h>
|
|
|
|
#include "sdhci-pltfm.h"
|
|
#include "cqhci.h"
|
|
|
|
/* Tegra SDHOST controller vendor register definitions */
|
|
#define SDHCI_TEGRA_VENDOR_CLOCK_CTRL 0x100
|
|
#define SDHCI_CLOCK_CTRL_TAP_MASK 0x00ff0000
|
|
#define SDHCI_CLOCK_CTRL_TAP_SHIFT 16
|
|
#define SDHCI_CLOCK_CTRL_TRIM_MASK 0x1f000000
|
|
#define SDHCI_CLOCK_CTRL_TRIM_SHIFT 24
|
|
#define SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE BIT(5)
|
|
#define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE BIT(3)
|
|
#define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE BIT(2)
|
|
|
|
#define SDHCI_TEGRA_VENDOR_SYS_SW_CTRL 0x104
|
|
#define SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE BIT(31)
|
|
|
|
#define SDHCI_TEGRA_VENDOR_CAP_OVERRIDES 0x10c
|
|
#define SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_MASK 0x00003f00
|
|
#define SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_SHIFT 8
|
|
|
|
#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120
|
|
#define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8
|
|
#define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10
|
|
#define SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 0x20
|
|
#define SDHCI_MISC_CTRL_ENABLE_DDR50 0x200
|
|
|
|
#define SDHCI_TEGRA_VENDOR_DLLCAL_CFG 0x1b0
|
|
#define SDHCI_TEGRA_DLLCAL_CALIBRATE BIT(31)
|
|
|
|
#define SDHCI_TEGRA_VENDOR_DLLCAL_STA 0x1bc
|
|
#define SDHCI_TEGRA_DLLCAL_STA_ACTIVE BIT(31)
|
|
|
|
#define SDHCI_VNDR_TUN_CTRL0_0 0x1c0
|
|
#define SDHCI_VNDR_TUN_CTRL0_TUN_HW_TAP 0x20000
|
|
#define SDHCI_VNDR_TUN_CTRL0_START_TAP_VAL_MASK 0x03fc0000
|
|
#define SDHCI_VNDR_TUN_CTRL0_START_TAP_VAL_SHIFT 18
|
|
#define SDHCI_VNDR_TUN_CTRL0_MUL_M_MASK 0x00001fc0
|
|
#define SDHCI_VNDR_TUN_CTRL0_MUL_M_SHIFT 6
|
|
#define SDHCI_VNDR_TUN_CTRL0_TUN_ITER_MASK 0x000e000
|
|
#define SDHCI_VNDR_TUN_CTRL0_TUN_ITER_SHIFT 13
|
|
#define TRIES_128 2
|
|
#define TRIES_256 4
|
|
#define SDHCI_VNDR_TUN_CTRL0_TUN_WORD_SEL_MASK 0x7
|
|
|
|
#define SDHCI_TEGRA_VNDR_TUN_CTRL1_0 0x1c4
|
|
#define SDHCI_TEGRA_VNDR_TUN_STATUS0 0x1C8
|
|
#define SDHCI_TEGRA_VNDR_TUN_STATUS1 0x1CC
|
|
#define SDHCI_TEGRA_VNDR_TUN_STATUS1_TAP_MASK 0xFF
|
|
#define SDHCI_TEGRA_VNDR_TUN_STATUS1_END_TAP_SHIFT 0x8
|
|
#define TUNING_WORD_BIT_SIZE 32
|
|
|
|
#define SDHCI_TEGRA_AUTO_CAL_CONFIG 0x1e4
|
|
#define SDHCI_AUTO_CAL_START BIT(31)
|
|
#define SDHCI_AUTO_CAL_ENABLE BIT(29)
|
|
#define SDHCI_AUTO_CAL_PDPU_OFFSET_MASK 0x0000ffff
|
|
|
|
#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL 0x1e0
|
|
#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_MASK 0x0000000f
|
|
#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_VAL 0x7
|
|
#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_E_INPUT_E_PWRD BIT(31)
|
|
#define SDHCI_COMP_PADCTRL_DRVUPDN_OFFSET_MASK 0x07FFF000
|
|
|
|
#define SDHCI_TEGRA_AUTO_CAL_STATUS 0x1ec
|
|
#define SDHCI_TEGRA_AUTO_CAL_ACTIVE BIT(31)
|
|
|
|
#define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0)
|
|
#define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1)
|
|
#define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2)
|
|
#define NVQUIRK_ENABLE_SDR50 BIT(3)
|
|
#define NVQUIRK_ENABLE_SDR104 BIT(4)
|
|
#define NVQUIRK_ENABLE_DDR50 BIT(5)
|
|
#define NVQUIRK_HAS_PADCALIB BIT(6)
|
|
#define NVQUIRK_NEEDS_PAD_CONTROL BIT(7)
|
|
#define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP BIT(8)
|
|
#define NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING BIT(9)
|
|
|
|
/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
|
|
#define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000
|
|
|
|
struct sdhci_tegra_soc_data {
|
|
const struct sdhci_pltfm_data *pdata;
|
|
u32 nvquirks;
|
|
u8 min_tap_delay;
|
|
u8 max_tap_delay;
|
|
};
|
|
|
|
/* Magic pull up and pull down pad calibration offsets */
|
|
struct sdhci_tegra_autocal_offsets {
|
|
u32 pull_up_3v3;
|
|
u32 pull_down_3v3;
|
|
u32 pull_up_3v3_timeout;
|
|
u32 pull_down_3v3_timeout;
|
|
u32 pull_up_1v8;
|
|
u32 pull_down_1v8;
|
|
u32 pull_up_1v8_timeout;
|
|
u32 pull_down_1v8_timeout;
|
|
u32 pull_up_sdr104;
|
|
u32 pull_down_sdr104;
|
|
u32 pull_up_hs400;
|
|
u32 pull_down_hs400;
|
|
};
|
|
|
|
struct sdhci_tegra {
|
|
const struct sdhci_tegra_soc_data *soc_data;
|
|
struct gpio_desc *power_gpio;
|
|
bool ddr_signaling;
|
|
bool pad_calib_required;
|
|
bool pad_control_available;
|
|
|
|
struct reset_control *rst;
|
|
struct pinctrl *pinctrl_sdmmc;
|
|
struct pinctrl_state *pinctrl_state_3v3;
|
|
struct pinctrl_state *pinctrl_state_1v8;
|
|
struct pinctrl_state *pinctrl_state_3v3_drv;
|
|
struct pinctrl_state *pinctrl_state_1v8_drv;
|
|
|
|
struct sdhci_tegra_autocal_offsets autocal_offsets;
|
|
ktime_t last_calib;
|
|
|
|
u32 default_tap;
|
|
u32 default_trim;
|
|
u32 dqs_trim;
|
|
bool enable_hwcq;
|
|
unsigned long curr_clk_rate;
|
|
u8 tuned_tap_delay;
|
|
};
|
|
|
|
static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
|
|
|
|
if (unlikely((soc_data->nvquirks & NVQUIRK_FORCE_SDHCI_SPEC_200) &&
|
|
(reg == SDHCI_HOST_VERSION))) {
|
|
/* Erratum: Version register is invalid in HW. */
|
|
return SDHCI_SPEC_200;
|
|
}
|
|
|
|
return readw(host->ioaddr + reg);
|
|
}
|
|
|
|
static void tegra_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
switch (reg) {
|
|
case SDHCI_TRANSFER_MODE:
|
|
/*
|
|
* Postpone this write, we must do it together with a
|
|
* command write that is down below.
|
|
*/
|
|
pltfm_host->xfer_mode_shadow = val;
|
|
return;
|
|
case SDHCI_COMMAND:
|
|
writel((val << 16) | pltfm_host->xfer_mode_shadow,
|
|
host->ioaddr + SDHCI_TRANSFER_MODE);
|
|
return;
|
|
}
|
|
|
|
writew(val, host->ioaddr + reg);
|
|
}
|
|
|
|
static void tegra_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
|
|
|
|
/* Seems like we're getting spurious timeout and crc errors, so
|
|
* disable signalling of them. In case of real errors software
|
|
* timers should take care of eventually detecting them.
|
|
*/
|
|
if (unlikely(reg == SDHCI_SIGNAL_ENABLE))
|
|
val &= ~(SDHCI_INT_TIMEOUT|SDHCI_INT_CRC);
|
|
|
|
writel(val, host->ioaddr + reg);
|
|
|
|
if (unlikely((soc_data->nvquirks & NVQUIRK_ENABLE_BLOCK_GAP_DET) &&
|
|
(reg == SDHCI_INT_ENABLE))) {
|
|
/* Erratum: Must enable block gap interrupt detection */
|
|
u8 gap_ctrl = readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL);
|
|
if (val & SDHCI_INT_CARD_INT)
|
|
gap_ctrl |= 0x8;
|
|
else
|
|
gap_ctrl &= ~0x8;
|
|
writeb(gap_ctrl, host->ioaddr + SDHCI_BLOCK_GAP_CONTROL);
|
|
}
|
|
}
|
|
|
|
static bool tegra_sdhci_configure_card_clk(struct sdhci_host *host, bool enable)
|
|
{
|
|
bool status;
|
|
u32 reg;
|
|
|
|
reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
|
|
status = !!(reg & SDHCI_CLOCK_CARD_EN);
|
|
|
|
if (status == enable)
|
|
return status;
|
|
|
|
if (enable)
|
|
reg |= SDHCI_CLOCK_CARD_EN;
|
|
else
|
|
reg &= ~SDHCI_CLOCK_CARD_EN;
|
|
|
|
sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
|
|
|
|
return status;
|
|
}
|
|
|
|
static void tegra210_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
bool is_tuning_cmd = 0;
|
|
bool clk_enabled;
|
|
u8 cmd;
|
|
|
|
if (reg == SDHCI_COMMAND) {
|
|
cmd = SDHCI_GET_CMD(val);
|
|
is_tuning_cmd = cmd == MMC_SEND_TUNING_BLOCK ||
|
|
cmd == MMC_SEND_TUNING_BLOCK_HS200;
|
|
}
|
|
|
|
if (is_tuning_cmd)
|
|
clk_enabled = tegra_sdhci_configure_card_clk(host, 0);
|
|
|
|
writew(val, host->ioaddr + reg);
|
|
|
|
if (is_tuning_cmd) {
|
|
udelay(1);
|
|
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
|
|
tegra_sdhci_configure_card_clk(host, clk_enabled);
|
|
}
|
|
}
|
|
|
|
static bool tegra_sdhci_is_pad_and_regulator_valid(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
int has_1v8, has_3v3;
|
|
|
|
/*
|
|
* The SoCs which have NVQUIRK_NEEDS_PAD_CONTROL require software pad
|
|
* voltage configuration in order to perform voltage switching. This
|
|
* means that valid pinctrl info is required on SDHCI instances capable
|
|
* of performing voltage switching. Whether or not an SDHCI instance is
|
|
* capable of voltage switching is determined based on the regulator.
|
|
*/
|
|
|
|
if (!(tegra_host->soc_data->nvquirks & NVQUIRK_NEEDS_PAD_CONTROL))
|
|
return true;
|
|
|
|
if (IS_ERR(host->mmc->supply.vqmmc))
|
|
return false;
|
|
|
|
has_1v8 = regulator_is_supported_voltage(host->mmc->supply.vqmmc,
|
|
1700000, 1950000);
|
|
|
|
has_3v3 = regulator_is_supported_voltage(host->mmc->supply.vqmmc,
|
|
2700000, 3600000);
|
|
|
|
if (has_1v8 == 1 && has_3v3 == 1)
|
|
return tegra_host->pad_control_available;
|
|
|
|
/* Fixed voltage, no pad control required. */
|
|
return true;
|
|
}
|
|
|
|
static void tegra_sdhci_set_tap(struct sdhci_host *host, unsigned int tap)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
|
|
bool card_clk_enabled = false;
|
|
u32 reg;
|
|
|
|
/*
|
|
* Touching the tap values is a bit tricky on some SoC generations.
|
|
* The quirk enables a workaround for a glitch that sometimes occurs if
|
|
* the tap values are changed.
|
|
*/
|
|
|
|
if (soc_data->nvquirks & NVQUIRK_DIS_CARD_CLK_CONFIG_TAP)
|
|
card_clk_enabled = tegra_sdhci_configure_card_clk(host, false);
|
|
|
|
reg = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
|
|
reg &= ~SDHCI_CLOCK_CTRL_TAP_MASK;
|
|
reg |= tap << SDHCI_CLOCK_CTRL_TAP_SHIFT;
|
|
sdhci_writel(host, reg, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
|
|
|
|
if (soc_data->nvquirks & NVQUIRK_DIS_CARD_CLK_CONFIG_TAP &&
|
|
card_clk_enabled) {
|
|
udelay(1);
|
|
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
|
|
tegra_sdhci_configure_card_clk(host, card_clk_enabled);
|
|
}
|
|
}
|
|
|
|
static void tegra_sdhci_hs400_enhanced_strobe(struct mmc_host *mmc,
|
|
struct mmc_ios *ios)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
u32 val;
|
|
|
|
val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
|
|
|
|
if (ios->enhanced_strobe)
|
|
val |= SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
|
|
else
|
|
val &= ~SDHCI_TEGRA_SYS_SW_CTRL_ENHANCED_STROBE;
|
|
|
|
sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_SYS_SW_CTRL);
|
|
|
|
}
|
|
|
|
static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
|
|
u32 misc_ctrl, clk_ctrl, pad_ctrl;
|
|
|
|
sdhci_reset(host, mask);
|
|
|
|
if (!(mask & SDHCI_RESET_ALL))
|
|
return;
|
|
|
|
tegra_sdhci_set_tap(host, tegra_host->default_tap);
|
|
|
|
misc_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_MISC_CTRL);
|
|
clk_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
|
|
|
|
misc_ctrl &= ~(SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 |
|
|
SDHCI_MISC_CTRL_ENABLE_SDR50 |
|
|
SDHCI_MISC_CTRL_ENABLE_DDR50 |
|
|
SDHCI_MISC_CTRL_ENABLE_SDR104);
|
|
|
|
clk_ctrl &= ~(SDHCI_CLOCK_CTRL_TRIM_MASK |
|
|
SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE);
|
|
|
|
if (tegra_sdhci_is_pad_and_regulator_valid(host)) {
|
|
/* Erratum: Enable SDHCI spec v3.00 support */
|
|
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300)
|
|
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300;
|
|
/* Advertise UHS modes as supported by host */
|
|
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR50)
|
|
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR50;
|
|
if (soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
|
|
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_DDR50;
|
|
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR104)
|
|
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR104;
|
|
if (soc_data->nvquirks & SDHCI_MISC_CTRL_ENABLE_SDR50)
|
|
clk_ctrl |= SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE;
|
|
}
|
|
|
|
clk_ctrl |= tegra_host->default_trim << SDHCI_CLOCK_CTRL_TRIM_SHIFT;
|
|
|
|
sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
|
|
sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
|
|
|
|
if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB) {
|
|
pad_ctrl = sdhci_readl(host, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
|
|
pad_ctrl &= ~SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_MASK;
|
|
pad_ctrl |= SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_VAL;
|
|
sdhci_writel(host, pad_ctrl, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
|
|
|
|
tegra_host->pad_calib_required = true;
|
|
}
|
|
|
|
tegra_host->ddr_signaling = false;
|
|
}
|
|
|
|
static void tegra_sdhci_configure_cal_pad(struct sdhci_host *host, bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
/*
|
|
* Enable or disable the additional I/O pad used by the drive strength
|
|
* calibration process.
|
|
*/
|
|
val = sdhci_readl(host, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
|
|
|
|
if (enable)
|
|
val |= SDHCI_TEGRA_SDMEM_COMP_PADCTRL_E_INPUT_E_PWRD;
|
|
else
|
|
val &= ~SDHCI_TEGRA_SDMEM_COMP_PADCTRL_E_INPUT_E_PWRD;
|
|
|
|
sdhci_writel(host, val, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
|
|
|
|
if (enable)
|
|
usleep_range(1, 2);
|
|
}
|
|
|
|
static void tegra_sdhci_set_pad_autocal_offset(struct sdhci_host *host,
|
|
u16 pdpu)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
|
|
reg &= ~SDHCI_AUTO_CAL_PDPU_OFFSET_MASK;
|
|
reg |= pdpu;
|
|
sdhci_writel(host, reg, SDHCI_TEGRA_AUTO_CAL_CONFIG);
|
|
}
|
|
|
|
static int tegra_sdhci_set_padctrl(struct sdhci_host *host, int voltage,
|
|
bool state_drvupdn)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
struct sdhci_tegra_autocal_offsets *offsets =
|
|
&tegra_host->autocal_offsets;
|
|
struct pinctrl_state *pinctrl_drvupdn = NULL;
|
|
int ret = 0;
|
|
u8 drvup = 0, drvdn = 0;
|
|
u32 reg;
|
|
|
|
if (!state_drvupdn) {
|
|
/* PADS Drive Strength */
|
|
if (voltage == MMC_SIGNAL_VOLTAGE_180) {
|
|
if (tegra_host->pinctrl_state_1v8_drv) {
|
|
pinctrl_drvupdn =
|
|
tegra_host->pinctrl_state_1v8_drv;
|
|
} else {
|
|
drvup = offsets->pull_up_1v8_timeout;
|
|
drvdn = offsets->pull_down_1v8_timeout;
|
|
}
|
|
} else {
|
|
if (tegra_host->pinctrl_state_3v3_drv) {
|
|
pinctrl_drvupdn =
|
|
tegra_host->pinctrl_state_3v3_drv;
|
|
} else {
|
|
drvup = offsets->pull_up_3v3_timeout;
|
|
drvdn = offsets->pull_down_3v3_timeout;
|
|
}
|
|
}
|
|
|
|
if (pinctrl_drvupdn != NULL) {
|
|
ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc,
|
|
pinctrl_drvupdn);
|
|
if (ret < 0)
|
|
dev_err(mmc_dev(host->mmc),
|
|
"failed pads drvupdn, ret: %d\n", ret);
|
|
} else if ((drvup) || (drvdn)) {
|
|
reg = sdhci_readl(host,
|
|
SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
|
|
reg &= ~SDHCI_COMP_PADCTRL_DRVUPDN_OFFSET_MASK;
|
|
reg |= (drvup << 20) | (drvdn << 12);
|
|
sdhci_writel(host, reg,
|
|
SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
|
|
}
|
|
|
|
} else {
|
|
/* Dual Voltage PADS Voltage selection */
|
|
if (!tegra_host->pad_control_available)
|
|
return 0;
|
|
|
|
if (voltage == MMC_SIGNAL_VOLTAGE_180) {
|
|
ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc,
|
|
tegra_host->pinctrl_state_1v8);
|
|
if (ret < 0)
|
|
dev_err(mmc_dev(host->mmc),
|
|
"setting 1.8V failed, ret: %d\n", ret);
|
|
} else {
|
|
ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc,
|
|
tegra_host->pinctrl_state_3v3);
|
|
if (ret < 0)
|
|
dev_err(mmc_dev(host->mmc),
|
|
"setting 3.3V failed, ret: %d\n", ret);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
struct sdhci_tegra_autocal_offsets offsets =
|
|
tegra_host->autocal_offsets;
|
|
struct mmc_ios *ios = &host->mmc->ios;
|
|
bool card_clk_enabled;
|
|
u16 pdpu;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
switch (ios->timing) {
|
|
case MMC_TIMING_UHS_SDR104:
|
|
pdpu = offsets.pull_down_sdr104 << 8 | offsets.pull_up_sdr104;
|
|
break;
|
|
case MMC_TIMING_MMC_HS400:
|
|
pdpu = offsets.pull_down_hs400 << 8 | offsets.pull_up_hs400;
|
|
break;
|
|
default:
|
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
|
|
pdpu = offsets.pull_down_1v8 << 8 | offsets.pull_up_1v8;
|
|
else
|
|
pdpu = offsets.pull_down_3v3 << 8 | offsets.pull_up_3v3;
|
|
}
|
|
|
|
/* Set initial offset before auto-calibration */
|
|
tegra_sdhci_set_pad_autocal_offset(host, pdpu);
|
|
|
|
card_clk_enabled = tegra_sdhci_configure_card_clk(host, false);
|
|
|
|
tegra_sdhci_configure_cal_pad(host, true);
|
|
|
|
reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
|
|
reg |= SDHCI_AUTO_CAL_ENABLE | SDHCI_AUTO_CAL_START;
|
|
sdhci_writel(host, reg, SDHCI_TEGRA_AUTO_CAL_CONFIG);
|
|
|
|
usleep_range(1, 2);
|
|
/* 10 ms timeout */
|
|
ret = readl_poll_timeout(host->ioaddr + SDHCI_TEGRA_AUTO_CAL_STATUS,
|
|
reg, !(reg & SDHCI_TEGRA_AUTO_CAL_ACTIVE),
|
|
1000, 10000);
|
|
|
|
tegra_sdhci_configure_cal_pad(host, false);
|
|
|
|
tegra_sdhci_configure_card_clk(host, card_clk_enabled);
|
|
|
|
if (ret) {
|
|
dev_err(mmc_dev(host->mmc), "Pad autocal timed out\n");
|
|
|
|
/* Disable automatic cal and use fixed Drive Strengths */
|
|
reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
|
|
reg &= ~SDHCI_AUTO_CAL_ENABLE;
|
|
sdhci_writel(host, reg, SDHCI_TEGRA_AUTO_CAL_CONFIG);
|
|
|
|
ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage, false);
|
|
if (ret < 0)
|
|
dev_err(mmc_dev(host->mmc),
|
|
"Setting drive strengths failed: %d\n", ret);
|
|
}
|
|
}
|
|
|
|
static void tegra_sdhci_parse_pad_autocal_dt(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
struct sdhci_tegra_autocal_offsets *autocal =
|
|
&tegra_host->autocal_offsets;
|
|
int err;
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-up-offset-3v3",
|
|
&autocal->pull_up_3v3);
|
|
if (err)
|
|
autocal->pull_up_3v3 = 0;
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-down-offset-3v3",
|
|
&autocal->pull_down_3v3);
|
|
if (err)
|
|
autocal->pull_down_3v3 = 0;
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-up-offset-1v8",
|
|
&autocal->pull_up_1v8);
|
|
if (err)
|
|
autocal->pull_up_1v8 = 0;
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-down-offset-1v8",
|
|
&autocal->pull_down_1v8);
|
|
if (err)
|
|
autocal->pull_down_1v8 = 0;
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-up-offset-3v3-timeout",
|
|
&autocal->pull_up_3v3_timeout);
|
|
if (err) {
|
|
if (!IS_ERR(tegra_host->pinctrl_state_3v3) &&
|
|
(tegra_host->pinctrl_state_3v3_drv == NULL))
|
|
pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n",
|
|
mmc_hostname(host->mmc));
|
|
autocal->pull_up_3v3_timeout = 0;
|
|
}
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-down-offset-3v3-timeout",
|
|
&autocal->pull_down_3v3_timeout);
|
|
if (err) {
|
|
if (!IS_ERR(tegra_host->pinctrl_state_3v3) &&
|
|
(tegra_host->pinctrl_state_3v3_drv == NULL))
|
|
pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n",
|
|
mmc_hostname(host->mmc));
|
|
autocal->pull_down_3v3_timeout = 0;
|
|
}
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-up-offset-1v8-timeout",
|
|
&autocal->pull_up_1v8_timeout);
|
|
if (err) {
|
|
if (!IS_ERR(tegra_host->pinctrl_state_1v8) &&
|
|
(tegra_host->pinctrl_state_1v8_drv == NULL))
|
|
pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n",
|
|
mmc_hostname(host->mmc));
|
|
autocal->pull_up_1v8_timeout = 0;
|
|
}
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-down-offset-1v8-timeout",
|
|
&autocal->pull_down_1v8_timeout);
|
|
if (err) {
|
|
if (!IS_ERR(tegra_host->pinctrl_state_1v8) &&
|
|
(tegra_host->pinctrl_state_1v8_drv == NULL))
|
|
pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n",
|
|
mmc_hostname(host->mmc));
|
|
autocal->pull_down_1v8_timeout = 0;
|
|
}
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-up-offset-sdr104",
|
|
&autocal->pull_up_sdr104);
|
|
if (err)
|
|
autocal->pull_up_sdr104 = autocal->pull_up_1v8;
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-down-offset-sdr104",
|
|
&autocal->pull_down_sdr104);
|
|
if (err)
|
|
autocal->pull_down_sdr104 = autocal->pull_down_1v8;
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-up-offset-hs400",
|
|
&autocal->pull_up_hs400);
|
|
if (err)
|
|
autocal->pull_up_hs400 = autocal->pull_up_1v8;
|
|
|
|
err = device_property_read_u32(host->mmc->parent,
|
|
"nvidia,pad-autocal-pull-down-offset-hs400",
|
|
&autocal->pull_down_hs400);
|
|
if (err)
|
|
autocal->pull_down_hs400 = autocal->pull_down_1v8;
|
|
}
|
|
|
|
static void tegra_sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
ktime_t since_calib = ktime_sub(ktime_get(), tegra_host->last_calib);
|
|
|
|
/* 100 ms calibration interval is specified in the TRM */
|
|
if (ktime_to_ms(since_calib) > 100) {
|
|
tegra_sdhci_pad_autocalib(host);
|
|
tegra_host->last_calib = ktime_get();
|
|
}
|
|
|
|
sdhci_request(mmc, mrq);
|
|
}
|
|
|
|
static void tegra_sdhci_parse_tap_and_trim(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
int err;
|
|
|
|
err = device_property_read_u32(host->mmc->parent, "nvidia,default-tap",
|
|
&tegra_host->default_tap);
|
|
if (err)
|
|
tegra_host->default_tap = 0;
|
|
|
|
err = device_property_read_u32(host->mmc->parent, "nvidia,default-trim",
|
|
&tegra_host->default_trim);
|
|
if (err)
|
|
tegra_host->default_trim = 0;
|
|
|
|
err = device_property_read_u32(host->mmc->parent, "nvidia,dqs-trim",
|
|
&tegra_host->dqs_trim);
|
|
if (err)
|
|
tegra_host->dqs_trim = 0x11;
|
|
}
|
|
|
|
static void tegra_sdhci_parse_dt(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
if (device_property_read_bool(host->mmc->parent, "supports-cqe"))
|
|
tegra_host->enable_hwcq = true;
|
|
else
|
|
tegra_host->enable_hwcq = false;
|
|
|
|
tegra_sdhci_parse_pad_autocal_dt(host);
|
|
tegra_sdhci_parse_tap_and_trim(host);
|
|
}
|
|
|
|
static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
unsigned long host_clk;
|
|
|
|
if (!clock)
|
|
return sdhci_set_clock(host, clock);
|
|
|
|
/*
|
|
* In DDR50/52 modes the Tegra SDHCI controllers require the SDHCI
|
|
* divider to be configured to divided the host clock by two. The SDHCI
|
|
* clock divider is calculated as part of sdhci_set_clock() by
|
|
* sdhci_calc_clk(). The divider is calculated from host->max_clk and
|
|
* the requested clock rate.
|
|
*
|
|
* By setting the host->max_clk to clock * 2 the divider calculation
|
|
* will always result in the correct value for DDR50/52 modes,
|
|
* regardless of clock rate rounding, which may happen if the value
|
|
* from clk_get_rate() is used.
|
|
*/
|
|
host_clk = tegra_host->ddr_signaling ? clock * 2 : clock;
|
|
clk_set_rate(pltfm_host->clk, host_clk);
|
|
tegra_host->curr_clk_rate = host_clk;
|
|
if (tegra_host->ddr_signaling)
|
|
host->max_clk = host_clk;
|
|
else
|
|
host->max_clk = clk_get_rate(pltfm_host->clk);
|
|
|
|
sdhci_set_clock(host, clock);
|
|
|
|
if (tegra_host->pad_calib_required) {
|
|
tegra_sdhci_pad_autocalib(host);
|
|
tegra_host->pad_calib_required = false;
|
|
}
|
|
}
|
|
|
|
static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return clk_round_rate(pltfm_host->clk, UINT_MAX);
|
|
}
|
|
|
|
static void tegra_sdhci_set_dqs_trim(struct sdhci_host *host, u8 trim)
|
|
{
|
|
u32 val;
|
|
|
|
val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CAP_OVERRIDES);
|
|
val &= ~SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_MASK;
|
|
val |= trim << SDHCI_TEGRA_CAP_OVERRIDES_DQS_TRIM_SHIFT;
|
|
sdhci_writel(host, val, SDHCI_TEGRA_VENDOR_CAP_OVERRIDES);
|
|
}
|
|
|
|
static void tegra_sdhci_hs400_dll_cal(struct sdhci_host *host)
|
|
{
|
|
u32 reg;
|
|
int err;
|
|
|
|
reg = sdhci_readl(host, SDHCI_TEGRA_VENDOR_DLLCAL_CFG);
|
|
reg |= SDHCI_TEGRA_DLLCAL_CALIBRATE;
|
|
sdhci_writel(host, reg, SDHCI_TEGRA_VENDOR_DLLCAL_CFG);
|
|
|
|
/* 1 ms sleep, 5 ms timeout */
|
|
err = readl_poll_timeout(host->ioaddr + SDHCI_TEGRA_VENDOR_DLLCAL_STA,
|
|
reg, !(reg & SDHCI_TEGRA_DLLCAL_STA_ACTIVE),
|
|
1000, 5000);
|
|
if (err)
|
|
dev_err(mmc_dev(host->mmc),
|
|
"HS400 delay line calibration timed out\n");
|
|
}
|
|
|
|
static void tegra_sdhci_tap_correction(struct sdhci_host *host, u8 thd_up,
|
|
u8 thd_low, u8 fixed_tap)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
u32 val, tun_status;
|
|
u8 word, bit, edge1, tap, window;
|
|
bool tap_result;
|
|
bool start_fail = false;
|
|
bool start_pass = false;
|
|
bool end_pass = false;
|
|
bool first_fail = false;
|
|
bool first_pass = false;
|
|
u8 start_pass_tap = 0;
|
|
u8 end_pass_tap = 0;
|
|
u8 first_fail_tap = 0;
|
|
u8 first_pass_tap = 0;
|
|
u8 total_tuning_words = host->tuning_loop_count / TUNING_WORD_BIT_SIZE;
|
|
|
|
/*
|
|
* Read auto-tuned results and extract good valid passing window by
|
|
* filtering out un-wanted bubble/partial/merged windows.
|
|
*/
|
|
for (word = 0; word < total_tuning_words; word++) {
|
|
val = sdhci_readl(host, SDHCI_VNDR_TUN_CTRL0_0);
|
|
val &= ~SDHCI_VNDR_TUN_CTRL0_TUN_WORD_SEL_MASK;
|
|
val |= word;
|
|
sdhci_writel(host, val, SDHCI_VNDR_TUN_CTRL0_0);
|
|
tun_status = sdhci_readl(host, SDHCI_TEGRA_VNDR_TUN_STATUS0);
|
|
bit = 0;
|
|
while (bit < TUNING_WORD_BIT_SIZE) {
|
|
tap = word * TUNING_WORD_BIT_SIZE + bit;
|
|
tap_result = tun_status & (1 << bit);
|
|
if (!tap_result && !start_fail) {
|
|
start_fail = true;
|
|
if (!first_fail) {
|
|
first_fail_tap = tap;
|
|
first_fail = true;
|
|
}
|
|
|
|
} else if (tap_result && start_fail && !start_pass) {
|
|
start_pass_tap = tap;
|
|
start_pass = true;
|
|
if (!first_pass) {
|
|
first_pass_tap = tap;
|
|
first_pass = true;
|
|
}
|
|
|
|
} else if (!tap_result && start_fail && start_pass &&
|
|
!end_pass) {
|
|
end_pass_tap = tap - 1;
|
|
end_pass = true;
|
|
} else if (tap_result && start_pass && start_fail &&
|
|
end_pass) {
|
|
window = end_pass_tap - start_pass_tap;
|
|
/* discard merged window and bubble window */
|
|
if (window >= thd_up || window < thd_low) {
|
|
start_pass_tap = tap;
|
|
end_pass = false;
|
|
} else {
|
|
/* set tap at middle of valid window */
|
|
tap = start_pass_tap + window / 2;
|
|
tegra_host->tuned_tap_delay = tap;
|
|
return;
|
|
}
|
|
}
|
|
|
|
bit++;
|
|
}
|
|
}
|
|
|
|
if (!first_fail) {
|
|
WARN(1, "no edge detected, continue with hw tuned delay.\n");
|
|
} else if (first_pass) {
|
|
/* set tap location at fixed tap relative to the first edge */
|
|
edge1 = first_fail_tap + (first_pass_tap - first_fail_tap) / 2;
|
|
if (edge1 - 1 > fixed_tap)
|
|
tegra_host->tuned_tap_delay = edge1 - fixed_tap;
|
|
else
|
|
tegra_host->tuned_tap_delay = edge1 + fixed_tap;
|
|
}
|
|
}
|
|
|
|
static void tegra_sdhci_post_tuning(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
|
|
u32 avg_tap_dly, val, min_tap_dly, max_tap_dly;
|
|
u8 fixed_tap, start_tap, end_tap, window_width;
|
|
u8 thdupper, thdlower;
|
|
u8 num_iter;
|
|
u32 clk_rate_mhz, period_ps, bestcase, worstcase;
|
|
|
|
/* retain HW tuned tap to use incase if no correction is needed */
|
|
val = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
|
|
tegra_host->tuned_tap_delay = (val & SDHCI_CLOCK_CTRL_TAP_MASK) >>
|
|
SDHCI_CLOCK_CTRL_TAP_SHIFT;
|
|
if (soc_data->min_tap_delay && soc_data->max_tap_delay) {
|
|
min_tap_dly = soc_data->min_tap_delay;
|
|
max_tap_dly = soc_data->max_tap_delay;
|
|
clk_rate_mhz = tegra_host->curr_clk_rate / USEC_PER_SEC;
|
|
period_ps = USEC_PER_SEC / clk_rate_mhz;
|
|
bestcase = period_ps / min_tap_dly;
|
|
worstcase = period_ps / max_tap_dly;
|
|
/*
|
|
* Upper and Lower bound thresholds used to detect merged and
|
|
* bubble windows
|
|
*/
|
|
thdupper = (2 * worstcase + bestcase) / 2;
|
|
thdlower = worstcase / 4;
|
|
/*
|
|
* fixed tap is used when HW tuning result contains single edge
|
|
* and tap is set at fixed tap delay relative to the first edge
|
|
*/
|
|
avg_tap_dly = (period_ps * 2) / (min_tap_dly + max_tap_dly);
|
|
fixed_tap = avg_tap_dly / 2;
|
|
|
|
val = sdhci_readl(host, SDHCI_TEGRA_VNDR_TUN_STATUS1);
|
|
start_tap = val & SDHCI_TEGRA_VNDR_TUN_STATUS1_TAP_MASK;
|
|
end_tap = (val >> SDHCI_TEGRA_VNDR_TUN_STATUS1_END_TAP_SHIFT) &
|
|
SDHCI_TEGRA_VNDR_TUN_STATUS1_TAP_MASK;
|
|
window_width = end_tap - start_tap;
|
|
num_iter = host->tuning_loop_count;
|
|
/*
|
|
* partial window includes edges of the tuning range.
|
|
* merged window includes more taps so window width is higher
|
|
* than upper threshold.
|
|
*/
|
|
if (start_tap == 0 || (end_tap == (num_iter - 1)) ||
|
|
(end_tap == num_iter - 2) || window_width >= thdupper) {
|
|
pr_debug("%s: Apply tuning correction\n",
|
|
mmc_hostname(host->mmc));
|
|
tegra_sdhci_tap_correction(host, thdupper, thdlower,
|
|
fixed_tap);
|
|
}
|
|
}
|
|
|
|
tegra_sdhci_set_tap(host, tegra_host->tuned_tap_delay);
|
|
}
|
|
|
|
static int tegra_sdhci_execute_hw_tuning(struct mmc_host *mmc, u32 opcode)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
int err;
|
|
|
|
err = sdhci_execute_tuning(mmc, opcode);
|
|
if (!err && !host->tuning_err)
|
|
tegra_sdhci_post_tuning(host);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void tegra_sdhci_set_uhs_signaling(struct sdhci_host *host,
|
|
unsigned timing)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
bool set_default_tap = false;
|
|
bool set_dqs_trim = false;
|
|
bool do_hs400_dll_cal = false;
|
|
u8 iter = TRIES_256;
|
|
u32 val;
|
|
|
|
tegra_host->ddr_signaling = false;
|
|
switch (timing) {
|
|
case MMC_TIMING_UHS_SDR50:
|
|
break;
|
|
case MMC_TIMING_UHS_SDR104:
|
|
case MMC_TIMING_MMC_HS200:
|
|
/* Don't set default tap on tunable modes. */
|
|
iter = TRIES_128;
|
|
break;
|
|
case MMC_TIMING_MMC_HS400:
|
|
set_dqs_trim = true;
|
|
do_hs400_dll_cal = true;
|
|
iter = TRIES_128;
|
|
break;
|
|
case MMC_TIMING_MMC_DDR52:
|
|
case MMC_TIMING_UHS_DDR50:
|
|
tegra_host->ddr_signaling = true;
|
|
set_default_tap = true;
|
|
break;
|
|
default:
|
|
set_default_tap = true;
|
|
break;
|
|
}
|
|
|
|
val = sdhci_readl(host, SDHCI_VNDR_TUN_CTRL0_0);
|
|
val &= ~(SDHCI_VNDR_TUN_CTRL0_TUN_ITER_MASK |
|
|
SDHCI_VNDR_TUN_CTRL0_START_TAP_VAL_MASK |
|
|
SDHCI_VNDR_TUN_CTRL0_MUL_M_MASK);
|
|
val |= (iter << SDHCI_VNDR_TUN_CTRL0_TUN_ITER_SHIFT |
|
|
0 << SDHCI_VNDR_TUN_CTRL0_START_TAP_VAL_SHIFT |
|
|
1 << SDHCI_VNDR_TUN_CTRL0_MUL_M_SHIFT);
|
|
sdhci_writel(host, val, SDHCI_VNDR_TUN_CTRL0_0);
|
|
sdhci_writel(host, 0, SDHCI_TEGRA_VNDR_TUN_CTRL1_0);
|
|
|
|
host->tuning_loop_count = (iter == TRIES_128) ? 128 : 256;
|
|
|
|
sdhci_set_uhs_signaling(host, timing);
|
|
|
|
tegra_sdhci_pad_autocalib(host);
|
|
|
|
if (tegra_host->tuned_tap_delay && !set_default_tap)
|
|
tegra_sdhci_set_tap(host, tegra_host->tuned_tap_delay);
|
|
else
|
|
tegra_sdhci_set_tap(host, tegra_host->default_tap);
|
|
|
|
if (set_dqs_trim)
|
|
tegra_sdhci_set_dqs_trim(host, tegra_host->dqs_trim);
|
|
|
|
if (do_hs400_dll_cal)
|
|
tegra_sdhci_hs400_dll_cal(host);
|
|
}
|
|
|
|
static int tegra_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
|
|
{
|
|
unsigned int min, max;
|
|
|
|
/*
|
|
* Start search for minimum tap value at 10, as smaller values are
|
|
* may wrongly be reported as working but fail at higher speeds,
|
|
* according to the TRM.
|
|
*/
|
|
min = 10;
|
|
while (min < 255) {
|
|
tegra_sdhci_set_tap(host, min);
|
|
if (!mmc_send_tuning(host->mmc, opcode, NULL))
|
|
break;
|
|
min++;
|
|
}
|
|
|
|
/* Find the maximum tap value that still passes. */
|
|
max = min + 1;
|
|
while (max < 255) {
|
|
tegra_sdhci_set_tap(host, max);
|
|
if (mmc_send_tuning(host->mmc, opcode, NULL)) {
|
|
max--;
|
|
break;
|
|
}
|
|
max++;
|
|
}
|
|
|
|
/* The TRM states the ideal tap value is at 75% in the passing range. */
|
|
tegra_sdhci_set_tap(host, min + ((max - min) * 3 / 4));
|
|
|
|
return mmc_send_tuning(host->mmc, opcode, NULL);
|
|
}
|
|
|
|
static int sdhci_tegra_start_signal_voltage_switch(struct mmc_host *mmc,
|
|
struct mmc_ios *ios)
|
|
{
|
|
struct sdhci_host *host = mmc_priv(mmc);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
int ret = 0;
|
|
|
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
|
|
ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = sdhci_start_signal_voltage_switch(mmc, ios);
|
|
} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
|
|
ret = sdhci_start_signal_voltage_switch(mmc, ios);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage, true);
|
|
}
|
|
|
|
if (tegra_host->pad_calib_required)
|
|
tegra_sdhci_pad_autocalib(host);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tegra_sdhci_init_pinctrl_info(struct device *dev,
|
|
struct sdhci_tegra *tegra_host)
|
|
{
|
|
tegra_host->pinctrl_sdmmc = devm_pinctrl_get(dev);
|
|
if (IS_ERR(tegra_host->pinctrl_sdmmc)) {
|
|
dev_dbg(dev, "No pinctrl info, err: %ld\n",
|
|
PTR_ERR(tegra_host->pinctrl_sdmmc));
|
|
return -1;
|
|
}
|
|
|
|
tegra_host->pinctrl_state_1v8_drv = pinctrl_lookup_state(
|
|
tegra_host->pinctrl_sdmmc, "sdmmc-1v8-drv");
|
|
if (IS_ERR(tegra_host->pinctrl_state_1v8_drv)) {
|
|
if (PTR_ERR(tegra_host->pinctrl_state_1v8_drv) == -ENODEV)
|
|
tegra_host->pinctrl_state_1v8_drv = NULL;
|
|
}
|
|
|
|
tegra_host->pinctrl_state_3v3_drv = pinctrl_lookup_state(
|
|
tegra_host->pinctrl_sdmmc, "sdmmc-3v3-drv");
|
|
if (IS_ERR(tegra_host->pinctrl_state_3v3_drv)) {
|
|
if (PTR_ERR(tegra_host->pinctrl_state_3v3_drv) == -ENODEV)
|
|
tegra_host->pinctrl_state_3v3_drv = NULL;
|
|
}
|
|
|
|
tegra_host->pinctrl_state_3v3 =
|
|
pinctrl_lookup_state(tegra_host->pinctrl_sdmmc, "sdmmc-3v3");
|
|
if (IS_ERR(tegra_host->pinctrl_state_3v3)) {
|
|
dev_warn(dev, "Missing 3.3V pad state, err: %ld\n",
|
|
PTR_ERR(tegra_host->pinctrl_state_3v3));
|
|
return -1;
|
|
}
|
|
|
|
tegra_host->pinctrl_state_1v8 =
|
|
pinctrl_lookup_state(tegra_host->pinctrl_sdmmc, "sdmmc-1v8");
|
|
if (IS_ERR(tegra_host->pinctrl_state_1v8)) {
|
|
dev_warn(dev, "Missing 1.8V pad state, err: %ld\n",
|
|
PTR_ERR(tegra_host->pinctrl_state_1v8));
|
|
return -1;
|
|
}
|
|
|
|
tegra_host->pad_control_available = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_sdhci_voltage_switch(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
|
|
|
|
if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
|
|
tegra_host->pad_calib_required = true;
|
|
}
|
|
|
|
static void tegra_cqhci_writel(struct cqhci_host *cq_host, u32 val, int reg)
|
|
{
|
|
struct mmc_host *mmc = cq_host->mmc;
|
|
u8 ctrl;
|
|
ktime_t timeout;
|
|
bool timed_out;
|
|
|
|
/*
|
|
* During CQE resume/unhalt, CQHCI driver unhalts CQE prior to
|
|
* cqhci_host_ops enable where SDHCI DMA and BLOCK_SIZE registers need
|
|
* to be re-configured.
|
|
* Tegra CQHCI/SDHCI prevents write access to block size register when
|
|
* CQE is unhalted. So handling CQE resume sequence here to configure
|
|
* SDHCI block registers prior to exiting CQE halt state.
|
|
*/
|
|
if (reg == CQHCI_CTL && !(val & CQHCI_HALT) &&
|
|
cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT) {
|
|
sdhci_cqe_enable(mmc);
|
|
writel(val, cq_host->mmio + reg);
|
|
timeout = ktime_add_us(ktime_get(), 50);
|
|
while (1) {
|
|
timed_out = ktime_compare(ktime_get(), timeout) > 0;
|
|
ctrl = cqhci_readl(cq_host, CQHCI_CTL);
|
|
if (!(ctrl & CQHCI_HALT) || timed_out)
|
|
break;
|
|
}
|
|
/*
|
|
* CQE usually resumes very quick, but incase if Tegra CQE
|
|
* doesn't resume retry unhalt.
|
|
*/
|
|
if (timed_out)
|
|
writel(val, cq_host->mmio + reg);
|
|
} else {
|
|
writel(val, cq_host->mmio + reg);
|
|
}
|
|
}
|
|
|
|
static void sdhci_tegra_update_dcmd_desc(struct mmc_host *mmc,
|
|
struct mmc_request *mrq, u64 *data)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(mmc_priv(mmc));
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
|
|
|
|
if (soc_data->nvquirks & NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING &&
|
|
mrq->cmd->flags & MMC_RSP_R1B)
|
|
*data |= CQHCI_CMD_TIMING(1);
|
|
}
|
|
|
|
static void sdhci_tegra_cqe_enable(struct mmc_host *mmc)
|
|
{
|
|
struct cqhci_host *cq_host = mmc->cqe_private;
|
|
u32 val;
|
|
|
|
/*
|
|
* Tegra CQHCI/SDMMC design prevents write access to sdhci block size
|
|
* register when CQE is enabled and unhalted.
|
|
* CQHCI driver enables CQE prior to activation, so disable CQE before
|
|
* programming block size in sdhci controller and enable it back.
|
|
*/
|
|
if (!cq_host->activated) {
|
|
val = cqhci_readl(cq_host, CQHCI_CFG);
|
|
if (val & CQHCI_ENABLE)
|
|
cqhci_writel(cq_host, (val & ~CQHCI_ENABLE),
|
|
CQHCI_CFG);
|
|
sdhci_cqe_enable(mmc);
|
|
if (val & CQHCI_ENABLE)
|
|
cqhci_writel(cq_host, val, CQHCI_CFG);
|
|
}
|
|
|
|
/*
|
|
* CMD CRC errors are seen sometimes with some eMMC devices when status
|
|
* command is sent during transfer of last data block which is the
|
|
* default case as send status command block counter (CBC) is 1.
|
|
* Recommended fix to set CBC to 0 allowing send status command only
|
|
* when data lines are idle.
|
|
*/
|
|
val = cqhci_readl(cq_host, CQHCI_SSC1);
|
|
val &= ~CQHCI_SSC1_CBC_MASK;
|
|
cqhci_writel(cq_host, val, CQHCI_SSC1);
|
|
}
|
|
|
|
static void sdhci_tegra_dumpregs(struct mmc_host *mmc)
|
|
{
|
|
sdhci_dumpregs(mmc_priv(mmc));
|
|
}
|
|
|
|
static u32 sdhci_tegra_cqhci_irq(struct sdhci_host *host, u32 intmask)
|
|
{
|
|
int cmd_error = 0;
|
|
int data_error = 0;
|
|
|
|
if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
|
|
return intmask;
|
|
|
|
cqhci_irq(host->mmc, intmask, cmd_error, data_error);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = {
|
|
.write_l = tegra_cqhci_writel,
|
|
.enable = sdhci_tegra_cqe_enable,
|
|
.disable = sdhci_cqe_disable,
|
|
.dumpregs = sdhci_tegra_dumpregs,
|
|
.update_dcmd_desc = sdhci_tegra_update_dcmd_desc,
|
|
};
|
|
|
|
static const struct sdhci_ops tegra_sdhci_ops = {
|
|
.read_w = tegra_sdhci_readw,
|
|
.write_l = tegra_sdhci_writel,
|
|
.set_clock = tegra_sdhci_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = tegra_sdhci_reset,
|
|
.platform_execute_tuning = tegra_sdhci_execute_tuning,
|
|
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
|
|
.voltage_switch = tegra_sdhci_voltage_switch,
|
|
.get_max_clock = tegra_sdhci_get_max_clock,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
|
|
SDHCI_QUIRK_SINGLE_POWER_WRITE |
|
|
SDHCI_QUIRK_NO_HISPD_BIT |
|
|
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
|
|
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
|
|
.ops = &tegra_sdhci_ops,
|
|
};
|
|
|
|
static const struct sdhci_tegra_soc_data soc_data_tegra20 = {
|
|
.pdata = &sdhci_tegra20_pdata,
|
|
.nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 |
|
|
NVQUIRK_ENABLE_BLOCK_GAP_DET,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_tegra30_pdata = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
|
|
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_SINGLE_POWER_WRITE |
|
|
SDHCI_QUIRK_NO_HISPD_BIT |
|
|
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
|
|
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
|
|
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
|
|
SDHCI_QUIRK2_BROKEN_HS200 |
|
|
/*
|
|
* Auto-CMD23 leads to "Got command interrupt 0x00010000 even
|
|
* though no command operation was in progress."
|
|
*
|
|
* The exact reason is unknown, as the same hardware seems
|
|
* to support Auto CMD23 on a downstream 3.1 kernel.
|
|
*/
|
|
SDHCI_QUIRK2_ACMD23_BROKEN,
|
|
.ops = &tegra_sdhci_ops,
|
|
};
|
|
|
|
static const struct sdhci_tegra_soc_data soc_data_tegra30 = {
|
|
.pdata = &sdhci_tegra30_pdata,
|
|
.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 |
|
|
NVQUIRK_ENABLE_SDR50 |
|
|
NVQUIRK_ENABLE_SDR104 |
|
|
NVQUIRK_HAS_PADCALIB,
|
|
};
|
|
|
|
static const struct sdhci_ops tegra114_sdhci_ops = {
|
|
.read_w = tegra_sdhci_readw,
|
|
.write_w = tegra_sdhci_writew,
|
|
.write_l = tegra_sdhci_writel,
|
|
.set_clock = tegra_sdhci_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = tegra_sdhci_reset,
|
|
.platform_execute_tuning = tegra_sdhci_execute_tuning,
|
|
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
|
|
.voltage_switch = tegra_sdhci_voltage_switch,
|
|
.get_max_clock = tegra_sdhci_get_max_clock,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
|
|
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_SINGLE_POWER_WRITE |
|
|
SDHCI_QUIRK_NO_HISPD_BIT |
|
|
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
|
|
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
|
|
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
|
|
.ops = &tegra114_sdhci_ops,
|
|
};
|
|
|
|
static const struct sdhci_tegra_soc_data soc_data_tegra114 = {
|
|
.pdata = &sdhci_tegra114_pdata,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_tegra124_pdata = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
|
|
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_SINGLE_POWER_WRITE |
|
|
SDHCI_QUIRK_NO_HISPD_BIT |
|
|
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
|
|
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
|
|
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
|
|
/*
|
|
* The TRM states that the SD/MMC controller found on
|
|
* Tegra124 can address 34 bits (the maximum supported by
|
|
* the Tegra memory controller), but tests show that DMA
|
|
* to or from above 4 GiB doesn't work. This is possibly
|
|
* caused by missing programming, though it's not obvious
|
|
* what sequence is required. Mark 64-bit DMA broken for
|
|
* now to fix this for existing users (e.g. Nyan boards).
|
|
*/
|
|
SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
|
|
.ops = &tegra114_sdhci_ops,
|
|
};
|
|
|
|
static const struct sdhci_tegra_soc_data soc_data_tegra124 = {
|
|
.pdata = &sdhci_tegra124_pdata,
|
|
};
|
|
|
|
static const struct sdhci_ops tegra210_sdhci_ops = {
|
|
.read_w = tegra_sdhci_readw,
|
|
.write_w = tegra210_sdhci_writew,
|
|
.write_l = tegra_sdhci_writel,
|
|
.set_clock = tegra_sdhci_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = tegra_sdhci_reset,
|
|
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
|
|
.voltage_switch = tegra_sdhci_voltage_switch,
|
|
.get_max_clock = tegra_sdhci_get_max_clock,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
|
|
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_SINGLE_POWER_WRITE |
|
|
SDHCI_QUIRK_NO_HISPD_BIT |
|
|
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
|
|
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
|
|
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
|
|
.ops = &tegra210_sdhci_ops,
|
|
};
|
|
|
|
static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
|
|
.pdata = &sdhci_tegra210_pdata,
|
|
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
|
|
NVQUIRK_HAS_PADCALIB |
|
|
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
|
|
NVQUIRK_ENABLE_SDR50 |
|
|
NVQUIRK_ENABLE_SDR104,
|
|
.min_tap_delay = 106,
|
|
.max_tap_delay = 185,
|
|
};
|
|
|
|
static const struct sdhci_ops tegra186_sdhci_ops = {
|
|
.read_w = tegra_sdhci_readw,
|
|
.write_l = tegra_sdhci_writel,
|
|
.set_clock = tegra_sdhci_set_clock,
|
|
.set_bus_width = sdhci_set_bus_width,
|
|
.reset = tegra_sdhci_reset,
|
|
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
|
|
.voltage_switch = tegra_sdhci_voltage_switch,
|
|
.get_max_clock = tegra_sdhci_get_max_clock,
|
|
.irq = sdhci_tegra_cqhci_irq,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
|
|
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
|
|
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
|
|
SDHCI_QUIRK_SINGLE_POWER_WRITE |
|
|
SDHCI_QUIRK_NO_HISPD_BIT |
|
|
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
|
|
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
|
|
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
|
|
/* SDHCI controllers on Tegra186 support 40-bit addressing.
|
|
* IOVA addresses are 48-bit wide on Tegra186.
|
|
* With 64-bit dma mask used for SDHCI, accesses can
|
|
* be broken. Disable 64-bit dma, which would fall back
|
|
* to 32-bit dma mask. Ideally 40-bit dma mask would work,
|
|
* But it is not supported as of now.
|
|
*/
|
|
SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
|
|
.ops = &tegra186_sdhci_ops,
|
|
};
|
|
|
|
static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
|
|
.pdata = &sdhci_tegra186_pdata,
|
|
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
|
|
NVQUIRK_HAS_PADCALIB |
|
|
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
|
|
NVQUIRK_ENABLE_SDR50 |
|
|
NVQUIRK_ENABLE_SDR104 |
|
|
NVQUIRK_CQHCI_DCMD_R1B_CMD_TIMING,
|
|
.min_tap_delay = 84,
|
|
.max_tap_delay = 136,
|
|
};
|
|
|
|
static const struct sdhci_tegra_soc_data soc_data_tegra194 = {
|
|
.pdata = &sdhci_tegra186_pdata,
|
|
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
|
|
NVQUIRK_HAS_PADCALIB |
|
|
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
|
|
NVQUIRK_ENABLE_SDR50 |
|
|
NVQUIRK_ENABLE_SDR104,
|
|
.min_tap_delay = 96,
|
|
.max_tap_delay = 139,
|
|
};
|
|
|
|
static const struct of_device_id sdhci_tegra_dt_match[] = {
|
|
{ .compatible = "nvidia,tegra194-sdhci", .data = &soc_data_tegra194 },
|
|
{ .compatible = "nvidia,tegra186-sdhci", .data = &soc_data_tegra186 },
|
|
{ .compatible = "nvidia,tegra210-sdhci", .data = &soc_data_tegra210 },
|
|
{ .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra124 },
|
|
{ .compatible = "nvidia,tegra114-sdhci", .data = &soc_data_tegra114 },
|
|
{ .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 },
|
|
{ .compatible = "nvidia,tegra20-sdhci", .data = &soc_data_tegra20 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sdhci_tegra_dt_match);
|
|
|
|
static int sdhci_tegra_add_host(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
struct cqhci_host *cq_host;
|
|
bool dma64;
|
|
int ret;
|
|
|
|
if (!tegra_host->enable_hwcq)
|
|
return sdhci_add_host(host);
|
|
|
|
sdhci_enable_v4_mode(host);
|
|
|
|
ret = sdhci_setup_host(host);
|
|
if (ret)
|
|
return ret;
|
|
|
|
host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
|
|
|
|
cq_host = devm_kzalloc(host->mmc->parent,
|
|
sizeof(*cq_host), GFP_KERNEL);
|
|
if (!cq_host) {
|
|
ret = -ENOMEM;
|
|
goto cleanup;
|
|
}
|
|
|
|
cq_host->mmio = host->ioaddr + SDHCI_TEGRA_CQE_BASE_ADDR;
|
|
cq_host->ops = &sdhci_tegra_cqhci_ops;
|
|
|
|
dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
|
|
if (dma64)
|
|
cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
|
|
|
|
ret = cqhci_init(cq_host, host->mmc, dma64);
|
|
if (ret)
|
|
goto cleanup;
|
|
|
|
ret = __sdhci_add_host(host);
|
|
if (ret)
|
|
goto cleanup;
|
|
|
|
return 0;
|
|
|
|
cleanup:
|
|
sdhci_cleanup_host(host);
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_tegra_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
const struct sdhci_tegra_soc_data *soc_data;
|
|
struct sdhci_host *host;
|
|
struct sdhci_pltfm_host *pltfm_host;
|
|
struct sdhci_tegra *tegra_host;
|
|
struct clk *clk;
|
|
int rc;
|
|
|
|
match = of_match_device(sdhci_tegra_dt_match, &pdev->dev);
|
|
if (!match)
|
|
return -EINVAL;
|
|
soc_data = match->data;
|
|
|
|
host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*tegra_host));
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
pltfm_host = sdhci_priv(host);
|
|
|
|
tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
tegra_host->ddr_signaling = false;
|
|
tegra_host->pad_calib_required = false;
|
|
tegra_host->pad_control_available = false;
|
|
tegra_host->soc_data = soc_data;
|
|
|
|
if (soc_data->nvquirks & NVQUIRK_NEEDS_PAD_CONTROL) {
|
|
rc = tegra_sdhci_init_pinctrl_info(&pdev->dev, tegra_host);
|
|
if (rc == 0)
|
|
host->mmc_host_ops.start_signal_voltage_switch =
|
|
sdhci_tegra_start_signal_voltage_switch;
|
|
}
|
|
|
|
/* Hook to periodically rerun pad calibration */
|
|
if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
|
|
host->mmc_host_ops.request = tegra_sdhci_request;
|
|
|
|
host->mmc_host_ops.hs400_enhanced_strobe =
|
|
tegra_sdhci_hs400_enhanced_strobe;
|
|
|
|
if (!host->ops->platform_execute_tuning)
|
|
host->mmc_host_ops.execute_tuning =
|
|
tegra_sdhci_execute_hw_tuning;
|
|
|
|
rc = mmc_of_parse(host->mmc);
|
|
if (rc)
|
|
goto err_parse_dt;
|
|
|
|
if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
|
|
host->mmc->caps |= MMC_CAP_1_8V_DDR;
|
|
|
|
tegra_sdhci_parse_dt(host);
|
|
|
|
tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(tegra_host->power_gpio)) {
|
|
rc = PTR_ERR(tegra_host->power_gpio);
|
|
goto err_power_req;
|
|
}
|
|
|
|
clk = devm_clk_get(mmc_dev(host->mmc), NULL);
|
|
if (IS_ERR(clk)) {
|
|
rc = PTR_ERR(clk);
|
|
|
|
if (rc != -EPROBE_DEFER)
|
|
dev_err(&pdev->dev, "failed to get clock: %d\n", rc);
|
|
|
|
goto err_clk_get;
|
|
}
|
|
clk_prepare_enable(clk);
|
|
pltfm_host->clk = clk;
|
|
|
|
tegra_host->rst = devm_reset_control_get_exclusive(&pdev->dev,
|
|
"sdhci");
|
|
if (IS_ERR(tegra_host->rst)) {
|
|
rc = PTR_ERR(tegra_host->rst);
|
|
dev_err(&pdev->dev, "failed to get reset control: %d\n", rc);
|
|
goto err_rst_get;
|
|
}
|
|
|
|
rc = reset_control_assert(tegra_host->rst);
|
|
if (rc)
|
|
goto err_rst_get;
|
|
|
|
usleep_range(2000, 4000);
|
|
|
|
rc = reset_control_deassert(tegra_host->rst);
|
|
if (rc)
|
|
goto err_rst_get;
|
|
|
|
usleep_range(2000, 4000);
|
|
|
|
rc = sdhci_tegra_add_host(host);
|
|
if (rc)
|
|
goto err_add_host;
|
|
|
|
return 0;
|
|
|
|
err_add_host:
|
|
reset_control_assert(tegra_host->rst);
|
|
err_rst_get:
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
err_clk_get:
|
|
err_power_req:
|
|
err_parse_dt:
|
|
sdhci_pltfm_free(pdev);
|
|
return rc;
|
|
}
|
|
|
|
static int sdhci_tegra_remove(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
|
|
|
|
sdhci_remove_host(host, 0);
|
|
|
|
reset_control_assert(tegra_host->rst);
|
|
usleep_range(2000, 4000);
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
|
|
sdhci_pltfm_free(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int __maybe_unused sdhci_tegra_suspend(struct device *dev)
|
|
{
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
int ret;
|
|
|
|
if (host->mmc->caps2 & MMC_CAP2_CQE) {
|
|
ret = cqhci_suspend(host->mmc);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = sdhci_suspend_host(host);
|
|
if (ret) {
|
|
cqhci_resume(host->mmc);
|
|
return ret;
|
|
}
|
|
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused sdhci_tegra_resume(struct device *dev)
|
|
{
|
|
struct sdhci_host *host = dev_get_drvdata(dev);
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(pltfm_host->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = sdhci_resume_host(host);
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
if (host->mmc->caps2 & MMC_CAP2_CQE) {
|
|
ret = cqhci_resume(host->mmc);
|
|
if (ret)
|
|
goto suspend_host;
|
|
}
|
|
|
|
return 0;
|
|
|
|
suspend_host:
|
|
sdhci_suspend_host(host);
|
|
disable_clk:
|
|
clk_disable_unprepare(pltfm_host->clk);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(sdhci_tegra_dev_pm_ops, sdhci_tegra_suspend,
|
|
sdhci_tegra_resume);
|
|
|
|
static struct platform_driver sdhci_tegra_driver = {
|
|
.driver = {
|
|
.name = "sdhci-tegra",
|
|
.of_match_table = sdhci_tegra_dt_match,
|
|
.pm = &sdhci_tegra_dev_pm_ops,
|
|
},
|
|
.probe = sdhci_tegra_probe,
|
|
.remove = sdhci_tegra_remove,
|
|
};
|
|
|
|
module_platform_driver(sdhci_tegra_driver);
|
|
|
|
MODULE_DESCRIPTION("SDHCI driver for Tegra");
|
|
MODULE_AUTHOR("Google, Inc.");
|
|
MODULE_LICENSE("GPL v2");
|