linux/drivers/net/wireless/ath/ath9k
David S. Miller d59542ddcb brcmfmac
* using netdev carrier state
 * add and rework some cfg80211 callbacks mainly for AP mode
 * use devcoredump when triggered by firmware event
 
 realtek
 
 * create new directory drivers/net/wireless/realtek/ for all realtek
   drivers, not visible to users (no kconfig changes etc)
 * add rtl8xxxu, a new mac80211 driver for RTL8723AU, RTL8188CU,
   RTL8188RU, RTL8191CU, RTL8192CU and hopefully more in the future
 
 ath10k
 
 * add board 2 API support for automatically choosing correct board file
 * data path optimisations
 * disable PCI power save for qca988x and QCA99x0 due to interop reasons
 
 wil6210
 
 * BlockAckReq support
 * firmware crashdump using devcoredump
 * capture all frames with sniffer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJWLzQ5AAoJEG4XJFUm622btRwH/A6fS7p5uSZzH5lIU8ZBLc7X
 MzC1jYVepHXaR5+OhBIbQ5oSo47Y4xqMeO2ylFMpUSg4vntqR9yZNVH2lXV5EfPB
 fIaGYIsb3ExjAFoIjFUBwqSOB7CCZK5myk+SLiOu9XghjsLObP5JLKgA49PGhFRn
 CCuDq9diDNeJBnVzTS1ms5wO6RmOBiizzjbu7adJI0Hu63z2+P4pNMG4Zz6E1z97
 z8DRFEwdNN9gKHIaEC61h7ZT9XDB/Tj31Wl3Irbi4GBS7sRXnFK46FYU8fMVDbDZ
 ykj05sq6nTrfwfVZtXbV3SxlYNSN4SFFRuskon6IUcIzlNTuIULgvlpCjJJ6tyQ=
 =pFoQ
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2015-10-27' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
here's a bigger pull request for 4.4. The diffstat looks scary as we
created a new directory realtek for all realtek drivers. In the future
I'm planning to create similar directories for all vendors, currently we
just have ath, mediatek and realtek. This change has been in linux-next
for a couple of weeks so it should be safe, but of course you never
know.

There's also a new driver rtl8xxxu for few realtek USB devices. This
just made it to the last linux-next build.

Otherwise there's nothing really special, more info below. If time
permits, and it's ok for you, I'm hoping to send you a one more pull
request this week.

brcmfmac

* using netdev carrier state
* add and rework some cfg80211 callbacks mainly for AP mode
* use devcoredump when triggered by firmware event

realtek

* create new directory drivers/net/wireless/realtek/ for all realtek
  drivers, not visible to users (no kconfig changes etc)
* add rtl8xxxu, a new mac80211 driver for RTL8723AU, RTL8188CU,
  RTL8188RU, RTL8191CU, RTL8192CU and hopefully more in the future

ath10k

* add board 2 API support for automatically choosing correct board file
* data path optimisations
* disable PCI power save for qca988x and QCA99x0 due to interop reasons

wil6210

* BlockAckReq support
* firmware crashdump using devcoredump
* capture all frames with sniffer
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 19:56:56 -07:00
..
Kconfig Revert "ath9k: export HW random number generator" 2015-07-31 10:25:16 +03:00
Makefile Revert "ath9k: export HW random number generator" 2015-07-31 10:25:16 +03:00
ahb.c ath9k: Add HW IDs for QCA956x 2015-01-15 14:24:57 +02:00
ani.c ath9k: use one shot read in ath9k_hw_update_mibstats 2015-03-30 11:31:31 +03:00
ani.h
antenna.c
ar953x_initvals.h ath9k: Update QCA953x initvals 2015-01-29 10:33:20 +02:00
ar955x_1p0_initvals.h ath9k: Update AR955x initvals 2015-01-29 10:33:21 +02:00
ar956x_initvals.h ath9k: Add initvals for QCA956x 2015-01-15 14:24:59 +02:00
ar5008_initvals.h
ar5008_phy.c ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate. 2015-05-26 14:02:45 +03:00
ar9001_initvals.h
ar9002_calib.c ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY 2015-03-30 11:31:30 +03:00
ar9002_hw.c
ar9002_initvals.h
ar9002_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9002_phy.c ath9k: split ar5008_hw_spur_mitigate and reuse common code in ar9002_hw_spur_mitigate. 2015-05-26 14:02:45 +03:00
ar9002_phy.h ath9k: Fix NF CCA limits for AR9287 and AR9227 2015-10-14 14:05:00 +03:00
ar9003_2p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9003_aic.c ath9k: Handle MCI_STATE_AIC_CAL 2015-03-20 08:28:11 +02:00
ar9003_aic.h ath9k: Handle MCI_STATE_AIC_CAL 2015-03-20 08:28:11 +02:00
ar9003_buffalo_initvals.h
ar9003_calib.c ath9k: enable hw manual peak calibration for QCA9561 2015-09-29 10:34:09 +03:00
ar9003_eeprom.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
ar9003_eeprom.h
ar9003_hw.c ath9k: rename ini_modes_rxgain_5g_xlna to ini_modes_rxgain_xlna 2015-10-14 14:15:55 +03:00
ar9003_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9003_mac.h
ar9003_mci.c ath9k: Start AIC calibration during MCI reset 2015-03-20 08:28:14 +02:00
ar9003_mci.h ath9k: Fix GPM initialization 2015-03-03 14:55:24 +02:00
ar9003_paprd.c
ar9003_phy.c ath9k: fix QCA9561 XLNA rxgain initial 2015-10-14 14:15:57 +03:00
ar9003_phy.h ath9k: Fix register definitions for QCA956x 2015-07-21 18:03:02 +03:00
ar9003_rtt.c ath9k: Fix RTT chainmask usage 2015-03-13 15:19:36 +02:00
ar9003_rtt.h ath9k_hw: make support for PC-OEM cards optional 2014-10-27 14:16:18 -04:00
ar9003_wow.c ath9k: Restart TSF2 timers on wakeup 2015-02-26 14:58:46 +02:00
ar9330_1p1_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9340_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h
ar9462_2p1_initvals.h
ar9485_initvals.h
ar9565_1p0_initvals.h
ar9565_1p1_initvals.h
ar9580_1p0_initvals.h ath9k: Update AR9580 initvals 2014-10-27 14:16:17 -04:00
ath9k.h ath9k: Add support for OCB mode 2015-09-29 10:39:22 +03:00
beacon.c ath9k: fix tracking of enabled AP beacons 2015-03-16 08:34:36 +02:00
btcoex.c ath9k: Fix wlan-active gpio for the AR9003 family 2015-03-03 15:46:56 +02:00
btcoex.h ath9k: Handle MCI_STATE_AIC_CAL_SINGLE 2015-03-20 08:27:20 +02:00
calib.c ath9k: ath9k_hw_loadnf: use REG_RMW 2015-03-30 11:31:32 +03:00
calib.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
channel.c ath9k: handle RoC cancel correctly 2015-08-06 10:11:06 +03:00
common-beacon.c Revert "ath9k: Calculate sleep duration" 2014-09-11 14:17:20 -04:00
common-beacon.h ath9k: move ath9k_beacon_config_ap common 2014-03-17 13:13:08 -04:00
common-debug.c ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-debug.h ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-init.c
common-init.h
common-spectral.c ath9k: Mix the received FFT bins to the random pool 2015-05-09 16:46:18 +03:00
common-spectral.h ath9k: Move processing of FFT frames to different functions 2015-05-09 16:46:11 +03:00
common.c Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-11-19 15:38:48 -05:00
common.h ath9k: fix tracking of enabled AP beacons 2015-03-16 08:34:36 +02:00
debug.c ath9k: Add support for OCB mode 2015-09-29 10:39:22 +03:00
debug.h ath9k: make DMA stop related messages debug-only 2015-07-21 16:56:41 +03:00
debug_sta.c ath9k: fix build with CONFIG_ATH9K_STATION_STATISTICS=y 2015-08-07 11:21:06 +03:00
dfs.c ath9k: DFS - add pulse chirp detection for FCC 2015-07-11 19:51:53 +03:00
dfs.h
dfs_debug.c
dfs_debug.h ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dynack.c ath9k: fix getting tx duration for dynack 2014-09-30 13:17:48 -04:00
dynack.h ath9k: add dynamic ACK timeout estimation 2014-09-16 16:18:30 -04:00
eeprom.c ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW 2015-03-30 11:31:37 +03:00
eeprom.h
eeprom_4k.c ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_board_values 2015-03-30 11:31:40 +03:00
eeprom_9287.c ath9k: add power per-rate tables for AR9002 chips 2015-01-15 14:47:06 +02:00
eeprom_def.c ath9k: use REG_RMW and rmw buffer in ath9k_hw_def_set_gain 2015-03-30 11:31:43 +03:00
gpio.c ath9k: add extra GPIO led support 2015-04-07 20:15:01 +03:00
hif_usb.c ath9k_htc: introduce support for different fw versions 2015-09-18 10:40:14 +03:00
hif_usb.h ath9k_htc: introduce support for different fw versions 2015-09-18 10:40:14 +03:00
htc.h ath9k_htc: add support of channel switch 2015-06-15 12:44:34 +03:00
htc_drv_beacon.c ath9k_htc: add support of channel switch 2015-06-15 12:44:34 +03:00
htc_drv_debug.c wireless: use %*pb[l] to print bitmaps including cpumasks and nodemasks 2015-02-13 21:21:38 -08:00
htc_drv_gpio.c ath9k and ath9k_htc: rename variable "led_blink" 2015-01-27 20:06:27 +02:00
htc_drv_init.c ath9k: Add support for OCB mode 2015-09-29 10:39:22 +03:00
htc_drv_main.c mac80211: allow to transmit A-MSDU within A-MPDU 2015-09-22 15:21:23 +02:00
htc_drv_txrx.c mac80211: remove support for IFF_PROMISC 2015-04-24 11:14:13 +02:00
htc_hst.c ath9k_htc: match wait_for_completion_timeout return type 2015-08-13 15:25:08 +03:00
htc_hst.h
hw-ops.h ath9k: Register private AIC ops 2015-03-20 08:27:17 +02:00
hw.c ath9k: Add support for OCB mode 2015-09-29 10:39:22 +03:00
hw.h ath9k: rename ini_modes_rxgain_5g_xlna to ini_modes_rxgain_xlna 2015-10-14 14:15:55 +03:00
init.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-10-20 06:08:27 -07:00
link.c ath9k: match wait_for_completion_timeout return type 2015-08-13 15:27:12 +03:00
mac.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
mac.h ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
main.c Major changes: 2015-10-12 19:39:18 -07:00
mci.c ath9k: Fix GPM initialization 2015-03-03 14:55:24 +02:00
mci.h
pci.c ath9k: Check WOW triggers properly 2015-02-03 15:31:04 +02:00
phy.h
recv.c ath9k: Add support for OCB mode 2015-09-29 10:39:22 +03:00
reg.h ath9k: add extra GPIO led support 2015-04-07 20:15:01 +03:00
reg_aic.h ath9k: Add register definitions for AIC 2015-03-20 08:27:19 +02:00
reg_mci.h ath9k: Mute BT properly 2015-03-03 14:55:27 +02:00
reg_wow.h ath9k: Clear additional WoW events 2015-02-26 14:58:43 +02:00
tx99.c ath9k: Unify reset API 2014-10-27 14:16:14 -04:00
wmi.c ath9k_htc: wmi: match wait_for_completion_timeout return type 2015-08-13 15:26:19 +03:00
wmi.h ath9k_htc: check seq number instead of cmd id for timeout 2015-04-07 20:07:44 +03:00
wow.c ath9k: Register correct WOW details with mac80211 2015-02-06 08:39:21 +02:00
xmit.c ath9k: remove the sched field in struct ath_atx_tid 2015-08-06 10:12:29 +03:00