linux/drivers/net/wireless/wl12xx
Luciano Coelho 98b2a68473 wl1271: add gpio_power file in debugfs to power the chip on and off
Some debugging tools require the chip to be powered on before they can work.
With these tools, we shouldn't upload the firmware nor boot the firmware
ourselves, so this debufs file is provided.  It always contains the gpio
power setting (0 = off, 1 = on).  To change the power setting, just write 0
or 1 to the file.

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28 16:31:32 -05:00
..
Kconfig wl1271: depend on INET 2009-11-04 18:44:42 -05:00
Makefile wl1251: remove wl1251_ops 2009-08-14 09:13:38 -04:00
wl12xx_80211.h wl1271: fix endianess issues 2009-10-27 16:48:19 -04:00
wl1251.h wl1251: add tx queue status to debugfs 2009-12-21 18:55:44 -05:00
wl1251_acx.c wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_acx.h wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_boot.c wl1251: add NVS in EEPROM support 2009-11-18 17:09:24 -05:00
wl1251_boot.h wl1251: remove wl1251_ops 2009-08-14 09:13:38 -04:00
wl1251_cmd.c wl1251: hack to disable filters for fixing association 2009-08-14 09:13:42 -04:00
wl1251_cmd.h wl1251: add channel to wl1251_cmd_join() parameters 2009-08-14 09:13:40 -04:00
wl1251_debugfs.c wl1251: add tx queue status to debugfs 2009-12-21 18:55:44 -05:00
wl1251_debugfs.h wl1251: use wl1251 prefix everywhere 2009-07-10 14:57:50 -04:00
wl1251_event.c wl1251: Increase the beacon loss timeout value and handle regain event 2009-11-18 17:09:22 -05:00
wl1251_event.h wl1251: use wl1251 prefix everywhere 2009-07-10 14:57:50 -04:00
wl1251_init.c wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_init.h wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_io.c wl1251: rename reg.h to wl1251_reg.h 2009-08-14 09:13:41 -04:00
wl1251_io.h wl1251: make wl1251_set_partition bus agnostic 2009-08-14 09:13:37 -04:00
wl1251_main.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-12-28 15:09:11 -05:00
wl1251_ps.c wl1251: simplify ELP wakeup time calculation 2009-12-21 18:55:52 -05:00
wl1251_ps.h wl1251: Implement delayed entry into ELP mode 2009-11-18 17:09:20 -05:00
wl1251_reg.h wl1251: add NVS in EEPROM support 2009-11-18 17:09:24 -05:00
wl1251_rx.c wl1251: use __dev_alloc_skb() on RX 2009-12-21 18:55:54 -05:00
wl1251_rx.h wl12xx: fix spelling 2009-07-24 15:05:26 -04:00
wl1251_sdio.c wl1251: remove Luciano as maintainer 2009-08-14 09:13:42 -04:00
wl1251_spi.c wl1251: add NVS in EEPROM support 2009-11-18 17:09:24 -05:00
wl1251_spi.h wl1251: rename reg.h to wl1251_reg.h 2009-08-14 09:13:41 -04:00
wl1251_tx.c wl1251: update tx_hdr when aliging skb in tx 2009-12-21 18:56:00 -05:00
wl1251_tx.h wl1251: enable WMM 2009-12-21 18:56:02 -05:00
wl1271.h wl1271: add gpio_power file in debugfs to power the chip on and off 2009-12-28 16:31:32 -05:00
wl1271_acx.c wl1271: implement dco itrim parameters setting 2009-12-28 16:31:31 -05:00
wl1271_acx.h wl1271: implement dco itrim parameters setting 2009-12-28 16:31:31 -05:00
wl1271_boot.c wl1271: Add retry implementation for PSM entries 2009-11-02 15:43:34 -05:00
wl1271_boot.h wl1271: RefClk configuration 2009-10-27 16:48:04 -04:00
wl1271_cmd.c wl1271: remove workaround for disconnection 2009-12-28 16:31:30 -05:00
wl1271_cmd.h wl1271: updated general parameters structure for newer firmwares 2009-12-28 16:31:29 -05:00
wl1271_conf.h wl1271: implement dco itrim parameters setting 2009-12-28 16:31:31 -05:00
wl1271_debugfs.c wl1271: add gpio_power file in debugfs to power the chip on and off 2009-12-28 16:31:32 -05:00
wl1271_debugfs.h wl1271: add wl1271 driver files 2009-08-14 09:12:46 -04:00
wl1271_event.c wl1271: Prevent PSM-entry retry loop if PSM cancelled 2009-11-28 15:04:26 -05:00
wl1271_event.h wl1271: Add retry implementation for PSM entries 2009-11-02 15:43:34 -05:00
wl1271_init.c wl1271: implement dco itrim parameters setting 2009-12-28 16:31:31 -05:00
wl1271_init.h wl1271: fix radio and general parameters commands 2009-11-28 15:04:30 -05:00
wl1271_main.c wl1271: add gpio_power file in debugfs to power the chip on and off 2009-12-28 16:31:32 -05:00
wl1271_ps.c wl1271: Implement beacon early termination support 2009-10-27 16:48:09 -04:00
wl1271_ps.h wl1271: Implement delayed entry into ELP 2009-10-27 16:47:49 -04:00
wl1271_reg.h wl1271: Add structure for firmware configuration values 2009-10-27 16:48:07 -04:00
wl1271_rx.c wl1271: use __dev_alloc_skb() on RX 2009-11-04 18:44:53 -05:00
wl1271_rx.h wl1271: fix endianess issues 2009-10-27 16:48:19 -04:00
wl1271_spi.c wl1271: fix sparse warnings about undeclared functions 2009-10-27 16:48:19 -04:00
wl1271_spi.h wl1271: Remove outdated SPI functions 2009-10-27 16:48:05 -04:00
wl1271_tx.c wl1271: fix endianess issues 2009-10-27 16:48:19 -04:00
wl1271_tx.h wl1271: fix endianess issues 2009-10-27 16:48:19 -04:00