mirror of https://gitee.com/openkylin/linux.git
232 lines
6.2 KiB
C
232 lines
6.2 KiB
C
/*
|
|
* Battery and Power Management code for the Sharp SL-C7xx
|
|
*
|
|
* Copyright (c) 2005 Richard Purdie
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio-pxa.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/apm-emulation.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/mach-types.h>
|
|
#include <mach/hardware.h>
|
|
|
|
#include <mach/corgi.h>
|
|
#include <mach/pxa2xx-regs.h>
|
|
#include "sharpsl_pm.h"
|
|
|
|
#include "generic.h"
|
|
|
|
#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */
|
|
#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */
|
|
#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */
|
|
#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */
|
|
#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */
|
|
#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */
|
|
|
|
static struct gpio charger_gpios[] = {
|
|
{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
|
|
{ CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
|
|
{ CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" },
|
|
{ CORGI_GPIO_AC_IN, GPIOF_IN, "Charger Detection" },
|
|
{ CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" },
|
|
{ CORGI_GPIO_WAKEUP, GPIOF_IN, "System wakeup notification" },
|
|
};
|
|
|
|
static void corgi_charger_init(void)
|
|
{
|
|
gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
|
|
}
|
|
|
|
static void corgi_measure_temp(int on)
|
|
{
|
|
gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
|
|
}
|
|
|
|
static void corgi_charge(int on)
|
|
{
|
|
if (on) {
|
|
if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
|
|
gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
|
|
gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
|
|
} else {
|
|
gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
|
|
gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
|
|
}
|
|
} else {
|
|
gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
|
|
gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
|
|
}
|
|
}
|
|
|
|
static void corgi_discharge(int on)
|
|
{
|
|
gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
|
|
}
|
|
|
|
static void corgi_presuspend(void)
|
|
{
|
|
}
|
|
|
|
static void corgi_postsuspend(void)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* Check what brought us out of the suspend.
|
|
* Return: 0 to sleep, otherwise wake
|
|
*/
|
|
static int corgi_should_wakeup(unsigned int resume_on_alarm)
|
|
{
|
|
int is_resume = 0;
|
|
|
|
dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
|
|
"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
|
|
PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
|
|
gpio_get_value(CORGI_GPIO_CHRG_FULL),
|
|
gpio_get_value(CORGI_GPIO_KEY_INT),
|
|
gpio_get_value(CORGI_GPIO_WAKEUP));
|
|
|
|
if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
|
|
if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
|
|
/* charge on */
|
|
dev_dbg(sharpsl_pm.dev, "ac insert\n");
|
|
sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
|
|
} else {
|
|
/* charge off */
|
|
dev_dbg(sharpsl_pm.dev, "ac remove\n");
|
|
sharpsl_pm_led(SHARPSL_LED_OFF);
|
|
sharpsl_pm.machinfo->charge(0);
|
|
sharpsl_pm.charge_mode = CHRG_OFF;
|
|
}
|
|
}
|
|
|
|
if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL)))
|
|
dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
|
|
|
|
if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT))
|
|
is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT);
|
|
|
|
if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP))
|
|
is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP);
|
|
|
|
if (resume_on_alarm && (PEDR & PWER_RTC))
|
|
is_resume |= PWER_RTC;
|
|
|
|
dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
|
|
return is_resume;
|
|
}
|
|
|
|
static unsigned long corgi_charger_wakeup(void)
|
|
{
|
|
unsigned long ret;
|
|
|
|
ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
|
|
| (!gpio_get_value(CORGI_GPIO_KEY_INT)
|
|
<< GPIO_bit(CORGI_GPIO_KEY_INT))
|
|
| (!gpio_get_value(CORGI_GPIO_WAKEUP)
|
|
<< GPIO_bit(CORGI_GPIO_WAKEUP));
|
|
return ret;
|
|
}
|
|
|
|
unsigned long corgipm_read_devdata(int type)
|
|
{
|
|
switch(type) {
|
|
case SHARPSL_STATUS_ACIN:
|
|
return !gpio_get_value(CORGI_GPIO_AC_IN);
|
|
case SHARPSL_STATUS_LOCK:
|
|
return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
|
|
case SHARPSL_STATUS_CHRGFULL:
|
|
return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
|
|
case SHARPSL_STATUS_FATAL:
|
|
return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
|
|
case SHARPSL_ACIN_VOLT:
|
|
return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
|
|
case SHARPSL_BATT_TEMP:
|
|
return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
|
|
case SHARPSL_BATT_VOLT:
|
|
default:
|
|
return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
|
|
}
|
|
}
|
|
|
|
static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
|
|
.init = corgi_charger_init,
|
|
.exit = NULL,
|
|
.gpio_batlock = CORGI_GPIO_BAT_COVER,
|
|
.gpio_acin = CORGI_GPIO_AC_IN,
|
|
.gpio_batfull = CORGI_GPIO_CHRG_FULL,
|
|
.discharge = corgi_discharge,
|
|
.charge = corgi_charge,
|
|
.measure_temp = corgi_measure_temp,
|
|
.presuspend = corgi_presuspend,
|
|
.postsuspend = corgi_postsuspend,
|
|
.read_devdata = corgipm_read_devdata,
|
|
.charger_wakeup = corgi_charger_wakeup,
|
|
.should_wakeup = corgi_should_wakeup,
|
|
#if defined(CONFIG_LCD_CORGI)
|
|
.backlight_limit = corgi_lcd_limit_intensity,
|
|
#endif
|
|
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
|
|
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
|
|
.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
|
|
.charge_acin_low = SHARPSL_CHARGE_ON_ACIN_LOW,
|
|
.fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
|
|
.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
|
|
.bat_levels = 40,
|
|
.bat_levels_noac = sharpsl_battery_levels_noac,
|
|
.bat_levels_acin = sharpsl_battery_levels_acin,
|
|
.status_high_acin = 188,
|
|
.status_low_acin = 178,
|
|
.status_high_noac = 185,
|
|
.status_low_noac = 175,
|
|
};
|
|
|
|
static struct platform_device *corgipm_device;
|
|
|
|
static int corgipm_init(void)
|
|
{
|
|
int ret;
|
|
|
|
if (!machine_is_corgi() && !machine_is_shepherd()
|
|
&& !machine_is_husky())
|
|
return -ENODEV;
|
|
|
|
corgipm_device = platform_device_alloc("sharpsl-pm", -1);
|
|
if (!corgipm_device)
|
|
return -ENOMEM;
|
|
|
|
if (!machine_is_corgi())
|
|
corgi_pm_machinfo.batfull_irq = 1;
|
|
|
|
corgipm_device->dev.platform_data = &corgi_pm_machinfo;
|
|
ret = platform_device_add(corgipm_device);
|
|
|
|
if (ret)
|
|
platform_device_put(corgipm_device);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void corgipm_exit(void)
|
|
{
|
|
platform_device_unregister(corgipm_device);
|
|
}
|
|
|
|
module_init(corgipm_init);
|
|
module_exit(corgipm_exit);
|