mirror of https://gitee.com/openkylin/linux.git
330 lines
8.4 KiB
C
330 lines
8.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright(c) 1999 - 2018 Intel Corporation. */
|
|
|
|
#include "e1000.h"
|
|
|
|
/**
|
|
* e1000_calculate_checksum - Calculate checksum for buffer
|
|
* @buffer: pointer to EEPROM
|
|
* @length: size of EEPROM to calculate a checksum for
|
|
*
|
|
* Calculates the checksum for some buffer on a specified length. The
|
|
* checksum calculated is returned.
|
|
**/
|
|
static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
|
|
{
|
|
u32 i;
|
|
u8 sum = 0;
|
|
|
|
if (!buffer)
|
|
return 0;
|
|
|
|
for (i = 0; i < length; i++)
|
|
sum += buffer[i];
|
|
|
|
return (u8)(0 - sum);
|
|
}
|
|
|
|
/**
|
|
* e1000_mng_enable_host_if - Checks host interface is enabled
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Returns 0 upon success, else -E1000_ERR_HOST_INTERFACE_COMMAND
|
|
*
|
|
* This function checks whether the HOST IF is enabled for command operation
|
|
* and also checks whether the previous command is completed. It busy waits
|
|
* in case of previous command is not completed.
|
|
**/
|
|
static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
|
|
{
|
|
u32 hicr;
|
|
u8 i;
|
|
|
|
if (!hw->mac.arc_subsystem_valid) {
|
|
e_dbg("ARC subsystem not valid.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
/* Check that the host interface is enabled. */
|
|
hicr = er32(HICR);
|
|
if (!(hicr & E1000_HICR_EN)) {
|
|
e_dbg("E1000_HOST_EN bit disabled.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
/* check the previous command is completed */
|
|
for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
|
|
hicr = er32(HICR);
|
|
if (!(hicr & E1000_HICR_C))
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
|
|
if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
|
|
e_dbg("Previous command timeout failed.\n");
|
|
return -E1000_ERR_HOST_INTERFACE_COMMAND;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* e1000e_check_mng_mode_generic - Generic check management mode
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Reads the firmware semaphore register and returns true (>0) if
|
|
* manageability is enabled, else false (0).
|
|
**/
|
|
bool e1000e_check_mng_mode_generic(struct e1000_hw *hw)
|
|
{
|
|
u32 fwsm = er32(FWSM);
|
|
|
|
return (fwsm & E1000_FWSM_MODE_MASK) ==
|
|
(E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
|
|
}
|
|
|
|
/**
|
|
* e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Enables packet filtering on transmit packets if manageability is enabled
|
|
* and host interface is enabled.
|
|
**/
|
|
bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
|
|
{
|
|
struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
|
|
u32 *buffer = (u32 *)&hw->mng_cookie;
|
|
u32 offset;
|
|
s32 ret_val, hdr_csum, csum;
|
|
u8 i, len;
|
|
|
|
hw->mac.tx_pkt_filtering = true;
|
|
|
|
/* No manageability, no filtering */
|
|
if (!hw->mac.ops.check_mng_mode(hw)) {
|
|
hw->mac.tx_pkt_filtering = false;
|
|
return hw->mac.tx_pkt_filtering;
|
|
}
|
|
|
|
/* If we can't read from the host interface for whatever
|
|
* reason, disable filtering.
|
|
*/
|
|
ret_val = e1000_mng_enable_host_if(hw);
|
|
if (ret_val) {
|
|
hw->mac.tx_pkt_filtering = false;
|
|
return hw->mac.tx_pkt_filtering;
|
|
}
|
|
|
|
/* Read in the header. Length and offset are in dwords. */
|
|
len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
|
|
offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
|
|
for (i = 0; i < len; i++)
|
|
*(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF,
|
|
offset + i);
|
|
hdr_csum = hdr->checksum;
|
|
hdr->checksum = 0;
|
|
csum = e1000_calculate_checksum((u8 *)hdr,
|
|
E1000_MNG_DHCP_COOKIE_LENGTH);
|
|
/* If either the checksums or signature don't match, then
|
|
* the cookie area isn't considered valid, in which case we
|
|
* take the safe route of assuming Tx filtering is enabled.
|
|
*/
|
|
if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
|
|
hw->mac.tx_pkt_filtering = true;
|
|
return hw->mac.tx_pkt_filtering;
|
|
}
|
|
|
|
/* Cookie area is valid, make the final check for filtering. */
|
|
if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING))
|
|
hw->mac.tx_pkt_filtering = false;
|
|
|
|
return hw->mac.tx_pkt_filtering;
|
|
}
|
|
|
|
/**
|
|
* e1000_mng_write_cmd_header - Writes manageability command header
|
|
* @hw: pointer to the HW structure
|
|
* @hdr: pointer to the host interface command header
|
|
*
|
|
* Writes the command header after does the checksum calculation.
|
|
**/
|
|
static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
|
|
struct e1000_host_mng_command_header *hdr)
|
|
{
|
|
u16 i, length = sizeof(struct e1000_host_mng_command_header);
|
|
|
|
/* Write the whole command header structure with new checksum. */
|
|
|
|
hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
|
|
|
|
length >>= 2;
|
|
/* Write the relevant command block into the ram area. */
|
|
for (i = 0; i < length; i++) {
|
|
E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i, *((u32 *)hdr + i));
|
|
e1e_flush();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* e1000_mng_host_if_write - Write to the manageability host interface
|
|
* @hw: pointer to the HW structure
|
|
* @buffer: pointer to the host interface buffer
|
|
* @length: size of the buffer
|
|
* @offset: location in the buffer to write to
|
|
* @sum: sum of the data (not checksum)
|
|
*
|
|
* This function writes the buffer content at the offset given on the host if.
|
|
* It also does alignment considerations to do the writes in most efficient
|
|
* way. Also fills up the sum of the buffer in *buffer parameter.
|
|
**/
|
|
static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
|
|
u16 length, u16 offset, u8 *sum)
|
|
{
|
|
u8 *tmp;
|
|
u8 *bufptr = buffer;
|
|
u32 data = 0;
|
|
u16 remaining, i, j, prev_bytes;
|
|
|
|
/* sum = only sum of the data and it is not checksum */
|
|
|
|
if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
|
|
return -E1000_ERR_PARAM;
|
|
|
|
tmp = (u8 *)&data;
|
|
prev_bytes = offset & 0x3;
|
|
offset >>= 2;
|
|
|
|
if (prev_bytes) {
|
|
data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset);
|
|
for (j = prev_bytes; j < sizeof(u32); j++) {
|
|
*(tmp + j) = *bufptr++;
|
|
*sum += *(tmp + j);
|
|
}
|
|
E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data);
|
|
length -= j - prev_bytes;
|
|
offset++;
|
|
}
|
|
|
|
remaining = length & 0x3;
|
|
length -= remaining;
|
|
|
|
/* Calculate length in DWORDs */
|
|
length >>= 2;
|
|
|
|
/* The device driver writes the relevant command block into the
|
|
* ram area.
|
|
*/
|
|
for (i = 0; i < length; i++) {
|
|
for (j = 0; j < sizeof(u32); j++) {
|
|
*(tmp + j) = *bufptr++;
|
|
*sum += *(tmp + j);
|
|
}
|
|
|
|
E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
|
|
}
|
|
if (remaining) {
|
|
for (j = 0; j < sizeof(u32); j++) {
|
|
if (j < remaining)
|
|
*(tmp + j) = *bufptr++;
|
|
else
|
|
*(tmp + j) = 0;
|
|
|
|
*sum += *(tmp + j);
|
|
}
|
|
E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
|
|
* @hw: pointer to the HW structure
|
|
* @buffer: pointer to the host interface
|
|
* @length: size of the buffer
|
|
*
|
|
* Writes the DHCP information to the host interface.
|
|
**/
|
|
s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
|
|
{
|
|
struct e1000_host_mng_command_header hdr;
|
|
s32 ret_val;
|
|
u32 hicr;
|
|
|
|
hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
|
|
hdr.command_length = length;
|
|
hdr.reserved1 = 0;
|
|
hdr.reserved2 = 0;
|
|
hdr.checksum = 0;
|
|
|
|
/* Enable the host interface */
|
|
ret_val = e1000_mng_enable_host_if(hw);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
/* Populate the host interface with the contents of "buffer". */
|
|
ret_val = e1000_mng_host_if_write(hw, buffer, length,
|
|
sizeof(hdr), &(hdr.checksum));
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
/* Write the manageability command header */
|
|
ret_val = e1000_mng_write_cmd_header(hw, &hdr);
|
|
if (ret_val)
|
|
return ret_val;
|
|
|
|
/* Tell the ARC a new command is pending. */
|
|
hicr = er32(HICR);
|
|
ew32(HICR, hicr | E1000_HICR_C);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* e1000e_enable_mng_pass_thru - Check if management passthrough is needed
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Verifies the hardware needs to leave interface enabled so that frames can
|
|
* be directed to and from the management interface.
|
|
**/
|
|
bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
|
|
{
|
|
u32 manc;
|
|
u32 fwsm, factps;
|
|
|
|
manc = er32(MANC);
|
|
|
|
if (!(manc & E1000_MANC_RCV_TCO_EN))
|
|
return false;
|
|
|
|
if (hw->mac.has_fwsm) {
|
|
fwsm = er32(FWSM);
|
|
factps = er32(FACTPS);
|
|
|
|
if (!(factps & E1000_FACTPS_MNGCG) &&
|
|
((fwsm & E1000_FWSM_MODE_MASK) ==
|
|
(e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)))
|
|
return true;
|
|
} else if ((hw->mac.type == e1000_82574) ||
|
|
(hw->mac.type == e1000_82583)) {
|
|
u16 data;
|
|
s32 ret_val;
|
|
|
|
factps = er32(FACTPS);
|
|
ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
|
|
if (ret_val)
|
|
return false;
|
|
|
|
if (!(factps & E1000_FACTPS_MNGCG) &&
|
|
((data & E1000_NVM_INIT_CTRL2_MNGM) ==
|
|
(e1000_mng_mode_pt << 13)))
|
|
return true;
|
|
} else if ((manc & E1000_MANC_SMBUS_EN) &&
|
|
!(manc & E1000_MANC_ASF_EN)) {
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|