mirror of https://gitee.com/openkylin/linux.git
99f75ce666
The .set_suspend_enable() and .set_suspend_disable() methods are not supposed to immediately change the regulator state but just indicated if the regulator should be enabled or disabled when standby mode is entered (by a hardware signal). However currently they set control the SEL bits in the DVC registers, which causes the voltage to change to immediately between the "A" (normal) and "B" (standby) values as programmed and does nothing for the enable state... This means that "regulator-on-in-suspend" does not work (the regulator is switched off when the PMIC enters standby mode on the hardware signal) and, potentially, depending on the A and B voltage configurations the voltage could be incorrectly changed *before* actually entering suspend. The right bit to use for the functionality is the "CONF" bit in the "CONT" register. The detailed register description says "Sequencer target state" for this bit which is not very clear but the functional description is clearer. >From 5.1.5 System Enable: De-asserting SYS_EN (changing from active to passive state) clears control SYSTEM_EN which triggers a power down sequence into hibernate/standby mode ... With the exception of supplies that have the xxxx_CONF control bit asserted, all regulators in power domains POWER1, POWER, and SYSTEM are sequentially disabled in reverse order. Regulators with the <x>_CONF bit set remain on but change the active voltage controlregisters from V<x>_A to V<x>_B (if V<x>_B is notalready selected). Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Link: https://lore.kernel.org/r/1584461691-14344-1-git-send-email-martin.fuzzey@flowbird.group Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|---|---|---|
| Documentation | ||
| LICENSES | ||
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
README
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.