mirror of https://gitee.com/openkylin/linux.git
59 lines
1.8 KiB
Plaintext
59 lines
1.8 KiB
Plaintext
* NXP SPI Flash Interface (SPIFI)
|
|
|
|
NXP SPIFI is a specialized SPI interface for serial Flash devices.
|
|
It supports one Flash device with 1-, 2- and 4-bits width in SPI
|
|
mode 0 or 3. The controller operates in either command or memory
|
|
mode. In memory mode the Flash is accessible from the CPU as
|
|
normal memory.
|
|
|
|
Required properties:
|
|
- compatible : Should be "nxp,lpc1773-spifi"
|
|
- reg : the first contains the register location and length,
|
|
the second contains the memory mapping address and length
|
|
- reg-names: Should contain the reg names "spifi" and "flash"
|
|
- interrupts : Should contain the interrupt for the device
|
|
- clocks : The clocks needed by the SPIFI controller
|
|
- clock-names : Should contain the clock names "spifi" and "reg"
|
|
|
|
Optional properties:
|
|
- resets : phandle + reset specifier
|
|
|
|
The SPI Flash must be a child of the SPIFI node and must have a
|
|
compatible property as specified in bindings/mtd/jedec,spi-nor.txt
|
|
|
|
Optionally it can also contain the following properties.
|
|
- spi-cpol : Controller only supports mode 0 and 3 so either
|
|
both spi-cpol and spi-cpha should be present or
|
|
none of them
|
|
- spi-cpha : See above
|
|
- spi-rx-bus-width : Used to select how many pins that are used
|
|
for input on the controller
|
|
|
|
See bindings/spi/spi-bus.txt for more information.
|
|
|
|
Example:
|
|
spifi: spifi@40003000 {
|
|
compatible = "nxp,lpc1773-spifi";
|
|
reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
|
|
reg-names = "spifi", "flash";
|
|
interrupts = <30>;
|
|
clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
|
|
clock-names = "spifi", "reg";
|
|
resets = <&rgu 53>;
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
spi-cpol;
|
|
spi-cpha;
|
|
spi-rx-bus-width = <4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "data";
|
|
reg = <0 0x200000>;
|
|
};
|
|
};
|
|
};
|
|
|