mirror of https://gitee.com/openkylin/linux.git
77 lines
3.2 KiB
Plaintext
77 lines
3.2 KiB
Plaintext
V3 Semiconductor V360 EPC PCI bridge
|
|
|
|
This bridge is found in the ARM Integrator/AP (Application Platform)
|
|
|
|
Required properties:
|
|
- compatible: should be one of:
|
|
"v3,v360epc-pci"
|
|
"arm,integrator-ap-pci", "v3,v360epc-pci"
|
|
- reg: should contain two register areas:
|
|
first the base address of the V3 host bridge controller, 64KB
|
|
second the configuration area register space, 16MB
|
|
- interrupts: should contain a reference to the V3 error interrupt
|
|
as routed on the system.
|
|
- bus-range: see pci.txt
|
|
- ranges: this follows the standard PCI bindings in the IEEE Std
|
|
1275-1994 (see pci.txt) with the following restriction:
|
|
- The non-prefetchable and prefetchable memory windows must
|
|
each be exactly 256MB (0x10000000) in size.
|
|
- The prefetchable memory window must be immediately adjacent
|
|
to the non-prefetcable memory window
|
|
- dma-ranges: three ranges for the inbound memory region. The ranges must
|
|
be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB,
|
|
64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked
|
|
as pre-fetchable. Two ranges are supported by the hardware.
|
|
|
|
Integrator-specific required properties:
|
|
- syscon: should contain a link to the syscon device node, since
|
|
on the Integrator, some registers in the syscon are required to
|
|
operate the V3 host bridge.
|
|
|
|
Example:
|
|
|
|
pci: pciv3@62000000 {
|
|
compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
|
|
interrupt-parent = <&pic>;
|
|
interrupts = <17>; /* Bus error IRQ */
|
|
clocks = <&pciclk>;
|
|
bus-range = <0x00 0xff>;
|
|
ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */
|
|
0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */
|
|
0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
|
|
0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
|
|
0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
|
|
0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
|
|
dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
|
|
0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
|
|
0x02000000 0 0x80000000 /* Core module alias memory */
|
|
0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
|
|
interrupt-map-mask = <0xf800 0 0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 9 */
|
|
0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
|
|
0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
|
|
0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
|
|
0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
|
|
/* IDSEL 10 */
|
|
0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
|
|
0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
|
|
0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
|
|
0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
|
|
/* IDSEL 11 */
|
|
0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
|
|
0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
|
|
0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
|
|
0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
|
|
/* IDSEL 12 */
|
|
0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
|
|
0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
|
|
0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
|
|
0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
|
|
>;
|
|
};
|