linux/drivers/serial/mrst_max3110.h

60 lines
1.5 KiB
C

#ifndef _MRST_MAX3110_H
#define _MRST_MAX3110_H
#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */
#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */
/* status bits for all 4 MAX3110 operate modes */
#define MAX3110_READ_DATA_AVAILABLE (1 << 15)
#define MAX3110_WRITE_BUF_EMPTY (1 << 14)
#define WC_TAG (3 << 14)
#define RC_TAG (1 << 14)
#define WD_TAG (2 << 14)
#define RD_TAG (0 << 14)
/* bits def for write configuration */
#define WC_FIFO_ENABLE_MASK (1 << 13)
#define WC_FIFO_ENABLE (0 << 13)
#define WC_SW_SHDI (1 << 12)
#define WC_IRQ_MASK (0xF << 8)
#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */
#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */
#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9)
#define WC_REC_ACT_IRQ_ENABLE (1 << 8)
#define WC_IRDA_ENABLE (1 << 7)
#define WC_STOPBITS_MASK (1 << 6)
#define WC_2_STOPBITS (1 << 6)
#define WC_1_STOPBITS (0 << 6)
#define WC_PARITY_ENABLE_MASK (1 << 5)
#define WC_PARITY_ENABLE (1 << 5)
#define WC_WORDLEN_MASK (1 << 4)
#define WC_7BIT_WORD (1 << 4)
#define WC_8BIT_WORD (0 << 4)
#define WC_BAUD_DIV_MASK (0xF)
#define WC_BAUD_DR1 (0x0)
#define WC_BAUD_DR2 (0x1)
#define WC_BAUD_DR4 (0x2)
#define WC_BAUD_DR8 (0x3)
#define WC_BAUD_DR16 (0x4)
#define WC_BAUD_DR32 (0x5)
#define WC_BAUD_DR64 (0x6)
#define WC_BAUD_DR128 (0x7)
#define WC_BAUD_DR3 (0x8)
#define WC_BAUD_DR6 (0x9)
#define WC_BAUD_DR12 (0xA)
#define WC_BAUD_DR24 (0xB)
#define WC_BAUD_DR48 (0xC)
#define WC_BAUD_DR96 (0xD)
#define WC_BAUD_DR192 (0xE)
#define WC_BAUD_DR384 (0xF)
#endif