linux/drivers/net/wireless/b43/Kconfig

132 lines
3.6 KiB
Plaintext

config B43
tristate "Broadcom 43xx wireless support (mac80211 stack)"
depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
select SSB
select FW_LOADER
select HW_RANDOM
---help---
b43 is a driver for the Broadcom 43xx series wireless devices.
Check "lspci" for something like
"Broadcom Corporation BCM43XX 802.11 Wireless LAN Controller"
to determine whether you own such a device.
This driver supports the new BCM43xx IEEE 802.11G devices, but not
the old IEEE 802.11B devices. Old devices are supported by
the b43legacy driver.
Note that this has nothing to do with the standard that your AccessPoint
supports (A, B, G or a combination).
IEEE 802.11G devices can talk to IEEE 802.11B AccessPoints.
It is safe to include both b43 and b43legacy as the underlying glue
layer will automatically load the correct version for your device.
This driver uses V4 firmware, which must be installed separately using
b43-fwcutter.
This driver can be built as a module (recommended) that will be called "b43".
If unsure, say M.
# Auto-select SSB PCI-HOST support, if possible
config B43_PCI_AUTOSELECT
bool
depends on B43 && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
default y
# Auto-select SSB PCICORE driver, if possible
config B43_PCICORE_AUTOSELECT
bool
depends on B43 && SSB_DRIVER_PCICORE_POSSIBLE
select SSB_DRIVER_PCICORE
default y
config B43_PCMCIA
bool "Broadcom 43xx PCMCIA device support (EXPERIMENTAL)"
depends on B43 && SSB_PCMCIAHOST_POSSIBLE && EXPERIMENTAL
select SSB_PCMCIAHOST
---help---
Broadcom 43xx PCMCIA device support.
Support for 16bit PCMCIA devices.
Please note that most PC-CARD devices are _NOT_ 16bit PCMCIA
devices, but 32bit CardBUS devices. CardBUS devices are supported
out of the box by b43.
With this config option you can drive b43 cards in
CompactFlash formfactor in a PCMCIA adaptor.
CF b43 cards can sometimes be found in handheld PCs.
It's safe to select Y here, even if you don't have a B43 PCMCIA device.
If unsure, say N.
# LED support
config B43_LEDS
bool
depends on B43 && MAC80211_LEDS
default y
# RFKILL support
config B43_RFKILL
bool
depends on B43 && RFKILL && RFKILL_INPUT && INPUT_POLLDEV
default y
config B43_DEBUG
bool "Broadcom 43xx debugging"
depends on B43
---help---
Broadcom 43xx debugging messages.
Say Y, if you want to find out why the driver does not
work for you.
config B43_DMA
bool
depends on B43
config B43_PIO
bool
depends on B43
choice
prompt "Broadcom 43xx data transfer mode"
depends on B43
default B43_DMA_AND_PIO_MODE
config B43_DMA_AND_PIO_MODE
bool "DMA + PIO"
select B43_DMA
select B43_PIO
---help---
Include both, Direct Memory Access (DMA) and Programmed I/O (PIO)
data transfer modes.
The actually used mode is selectable through the module
parameter "pio". If the module parameter is pio=0, DMA is used.
Otherwise PIO is used. DMA is default.
If unsure, choose this option.
config B43_DMA_MODE
bool "DMA (Direct Memory Access) only"
select B43_DMA
---help---
Only include Direct Memory Access (DMA).
This reduces the size of the driver module, by omitting the PIO code.
config B43_PIO_MODE
bool "PIO (Programmed I/O) only"
select B43_PIO
---help---
Only include Programmed I/O (PIO).
This reduces the size of the driver module, by omitting the DMA code.
Please note that PIO transfers are slow (compared to DMA).
Also note that not all devices of the 43xx series support PIO.
The 4306 (Apple Airport Extreme and others) supports PIO, while
the 4318 is known to _not_ support PIO.
Only use PIO, if DMA does not work for you.
endchoice