mirror of https://gitee.com/openkylin/linux.git
40 lines
1.5 KiB
Plaintext
40 lines
1.5 KiB
Plaintext
GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
|
|
|
|
The QUP v3 core is a GENI based AHB slave that provides a common data path
|
|
(an output FIFO and an input FIFO) for serial peripheral interface (SPI)
|
|
mini-core.
|
|
|
|
SPI in master mode supports up to 50MHz, up to four chip selects, programmable
|
|
data path from 4 bits to 32 bits and numerous protocol variants.
|
|
|
|
Required properties:
|
|
- compatible: Must contain "qcom,geni-spi".
|
|
- reg: Must contain SPI register location and length.
|
|
- interrupts: Must contain SPI controller interrupts.
|
|
- clock-names: Must contain "se".
|
|
- clocks: Serial engine core clock needed by the device.
|
|
- #address-cells: Must be <1> to define a chip select address on
|
|
the SPI bus.
|
|
- #size-cells: Must be <0>.
|
|
|
|
SPI Controller nodes must be child of GENI based Qualcomm Universal
|
|
Peripharal. Please refer GENI based QUP wrapper controller node bindings
|
|
described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
|
|
|
|
SPI slave nodes must be children of the SPI master node and conform to SPI bus
|
|
binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
|
|
|
|
Example:
|
|
spi0: spi@a84000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0xa84000 0x4000>;
|
|
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "se";
|
|
clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&qup_1_spi_2_active>;
|
|
pinctrl-1 = <&qup_1_spi_2_sleep>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|