Kuninori Morimoto 9ff7386656 ASoC: rsnd: don't assume node full path name for HDMI probing ... Current ssi.c is assuming below 2 things to probing HDMI node. 1) remote node is including "hdmi0" or "hdmi1" in node name 2) remote_ep->full_name is including full path name But, these assumptions are broken by below 1) Node names should not use numerical suffixes commit 6b5ac2f1cb ("arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixes") 2) node full_name no longer include full path name commit a7e4cfb0a7 ("of/fdt: only store the device node basename in full_name") Because of these reasons, ssi.c can't probe HDMI on current kernel. This patch probes HDMI0/1 by using its address. Note is that we need to keep updating for this address for future generation chip. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>		2018-04-16 11:53:51 +01:00
..
rcar	ASoC: rsnd: don't assume node full path name for HDMI probing	2018-04-16 11:53:51 +01:00
Kconfig	ASoC: rsnd: add HDMI output support	2017-05-19 18:36:25 +01:00
Makefile	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
dma-sh7760.c	ASoC: sh: dma-sh7760: replace platform to component	2018-02-12 11:45:14 +00:00
fsi.c	ASoC: sh: fsi: replace platform to component	2018-02-12 11:45:15 +00:00
hac.c	ASoC: sh: hac: add missing "int ret"	2017-07-24 13:06:53 +01:00
migor.c	ASoC: sh: make snd_soc_ops const	2017-08-17 18:09:48 +01:00
sh7760-ac97.c	ASoC: sh: Add .owner to struct snd_soc_card	2011-12-23 11:32:07 +00:00
siu.h	ASoC: sh: siu: replace platform to component	2018-02-12 11:45:15 +00:00
siu_dai.c	ASoC: sh: siu: replace platform to component	2018-02-12 11:45:15 +00:00
siu_pcm.c	ASoC: sh: siu: replace platform to component	2018-02-12 11:45:15 +00:00
ssi.c	ASoC: sh: ssi: Convert to devm_snd_soc_register_component	2015-08-28 17:28:49 +01:00