mirror of https://gitee.com/openkylin/linux.git
1297 lines
31 KiB
C
1297 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* Copyright (c) 2015, Sony Mobile Communications, AB.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ktime.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* From DT binding */
|
|
#define WLED_MAX_STRINGS 4
|
|
|
|
#define WLED_DEFAULT_BRIGHTNESS 2048
|
|
#define WLED_SOFT_START_DLY_US 10000
|
|
#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF
|
|
|
|
/* WLED3/WLED4 control registers */
|
|
#define WLED3_CTRL_REG_FAULT_STATUS 0x08
|
|
#define WLED3_CTRL_REG_ILIM_FAULT_BIT BIT(0)
|
|
#define WLED3_CTRL_REG_OVP_FAULT_BIT BIT(1)
|
|
#define WLED4_CTRL_REG_SC_FAULT_BIT BIT(2)
|
|
|
|
#define WLED3_CTRL_REG_INT_RT_STS 0x10
|
|
#define WLED3_CTRL_REG_OVP_FAULT_STATUS BIT(1)
|
|
|
|
#define WLED3_CTRL_REG_MOD_EN 0x46
|
|
#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7)
|
|
#define WLED3_CTRL_REG_MOD_EN_SHIFT 7
|
|
|
|
#define WLED3_CTRL_REG_FEEDBACK_CONTROL 0x48
|
|
|
|
#define WLED3_CTRL_REG_FREQ 0x4c
|
|
#define WLED3_CTRL_REG_FREQ_MASK GENMASK(3, 0)
|
|
|
|
#define WLED3_CTRL_REG_OVP 0x4d
|
|
#define WLED3_CTRL_REG_OVP_MASK GENMASK(1, 0)
|
|
|
|
#define WLED3_CTRL_REG_ILIMIT 0x4e
|
|
#define WLED3_CTRL_REG_ILIMIT_MASK GENMASK(2, 0)
|
|
|
|
/* WLED3/WLED4 sink registers */
|
|
#define WLED3_SINK_REG_SYNC 0x47
|
|
#define WLED3_SINK_REG_SYNC_CLEAR 0x00
|
|
|
|
#define WLED3_SINK_REG_CURR_SINK 0x4f
|
|
#define WLED3_SINK_REG_CURR_SINK_MASK GENMASK(7, 5)
|
|
#define WLED3_SINK_REG_CURR_SINK_SHFT 5
|
|
|
|
/* WLED3 specific per-'string' registers below */
|
|
#define WLED3_SINK_REG_BRIGHT(n) (0x40 + n)
|
|
|
|
#define WLED3_SINK_REG_STR_MOD_EN(n) (0x60 + (n * 0x10))
|
|
#define WLED3_SINK_REG_STR_MOD_MASK BIT(7)
|
|
|
|
#define WLED3_SINK_REG_STR_FULL_SCALE_CURR(n) (0x62 + (n * 0x10))
|
|
#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(4, 0)
|
|
|
|
#define WLED3_SINK_REG_STR_MOD_SRC(n) (0x63 + (n * 0x10))
|
|
#define WLED3_SINK_REG_STR_MOD_SRC_MASK BIT(0)
|
|
#define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00
|
|
#define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01
|
|
|
|
#define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10))
|
|
#define WLED3_SINK_REG_STR_CABC_MASK BIT(7)
|
|
|
|
/* WLED4 specific control registers */
|
|
#define WLED4_CTRL_REG_SHORT_PROTECT 0x5e
|
|
#define WLED4_CTRL_REG_SHORT_EN_MASK BIT(7)
|
|
|
|
#define WLED4_CTRL_REG_SEC_ACCESS 0xd0
|
|
#define WLED4_CTRL_REG_SEC_UNLOCK 0xa5
|
|
|
|
#define WLED4_CTRL_REG_TEST1 0xe2
|
|
#define WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2 0x09
|
|
|
|
/* WLED4 specific sink registers */
|
|
#define WLED4_SINK_REG_CURR_SINK 0x46
|
|
#define WLED4_SINK_REG_CURR_SINK_MASK GENMASK(7, 4)
|
|
#define WLED4_SINK_REG_CURR_SINK_SHFT 4
|
|
|
|
/* WLED4 specific per-'string' registers below */
|
|
#define WLED4_SINK_REG_STR_MOD_EN(n) (0x50 + (n * 0x10))
|
|
#define WLED4_SINK_REG_STR_MOD_MASK BIT(7)
|
|
|
|
#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n) (0x52 + (n * 0x10))
|
|
#define WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(3, 0)
|
|
|
|
#define WLED4_SINK_REG_STR_MOD_SRC(n) (0x53 + (n * 0x10))
|
|
#define WLED4_SINK_REG_STR_MOD_SRC_MASK BIT(0)
|
|
#define WLED4_SINK_REG_STR_MOD_SRC_INT 0x00
|
|
#define WLED4_SINK_REG_STR_MOD_SRC_EXT 0x01
|
|
|
|
#define WLED4_SINK_REG_STR_CABC(n) (0x56 + (n * 0x10))
|
|
#define WLED4_SINK_REG_STR_CABC_MASK BIT(7)
|
|
|
|
#define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10))
|
|
|
|
struct wled_var_cfg {
|
|
const u32 *values;
|
|
u32 (*fn)(u32);
|
|
int size;
|
|
};
|
|
|
|
struct wled_u32_opts {
|
|
const char *name;
|
|
u32 *val_ptr;
|
|
const struct wled_var_cfg *cfg;
|
|
};
|
|
|
|
struct wled_bool_opts {
|
|
const char *name;
|
|
bool *val_ptr;
|
|
};
|
|
|
|
struct wled_config {
|
|
u32 boost_i_limit;
|
|
u32 ovp;
|
|
u32 switch_freq;
|
|
u32 num_strings;
|
|
u32 string_i_limit;
|
|
u32 enabled_strings[WLED_MAX_STRINGS];
|
|
bool cs_out_en;
|
|
bool ext_gen;
|
|
bool cabc;
|
|
bool external_pfet;
|
|
bool auto_detection_enabled;
|
|
};
|
|
|
|
struct wled {
|
|
const char *name;
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct mutex lock; /* Lock to avoid race from thread irq handler */
|
|
ktime_t last_short_event;
|
|
ktime_t start_ovp_fault_time;
|
|
u16 ctrl_addr;
|
|
u16 sink_addr;
|
|
u16 max_string_count;
|
|
u16 auto_detection_ovp_count;
|
|
u32 brightness;
|
|
u32 max_brightness;
|
|
u32 short_count;
|
|
u32 auto_detect_count;
|
|
bool disabled_by_short;
|
|
bool has_short_detect;
|
|
int short_irq;
|
|
int ovp_irq;
|
|
|
|
struct wled_config cfg;
|
|
struct delayed_work ovp_work;
|
|
int (*wled_set_brightness)(struct wled *wled, u16 brightness);
|
|
};
|
|
|
|
static int wled3_set_brightness(struct wled *wled, u16 brightness)
|
|
{
|
|
int rc, i;
|
|
u8 v[2];
|
|
|
|
v[0] = brightness & 0xff;
|
|
v[1] = (brightness >> 8) & 0xf;
|
|
|
|
for (i = 0; i < wled->cfg.num_strings; ++i) {
|
|
rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
|
|
WLED3_SINK_REG_BRIGHT(i), v, 2);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wled4_set_brightness(struct wled *wled, u16 brightness)
|
|
{
|
|
int rc, i;
|
|
u16 low_limit = wled->max_brightness * 4 / 1000;
|
|
u8 v[2];
|
|
|
|
/* WLED4's lower limit of operation is 0.4% */
|
|
if (brightness > 0 && brightness < low_limit)
|
|
brightness = low_limit;
|
|
|
|
v[0] = brightness & 0xff;
|
|
v[1] = (brightness >> 8) & 0xf;
|
|
|
|
for (i = 0; i < wled->cfg.num_strings; ++i) {
|
|
rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
|
|
WLED4_SINK_REG_BRIGHT(i), v, 2);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wled_ovp_work(struct work_struct *work)
|
|
{
|
|
struct wled *wled = container_of(work,
|
|
struct wled, ovp_work.work);
|
|
enable_irq(wled->ovp_irq);
|
|
}
|
|
|
|
static int wled_module_enable(struct wled *wled, int val)
|
|
{
|
|
int rc;
|
|
|
|
if (wled->disabled_by_short)
|
|
return -ENXIO;
|
|
|
|
rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
|
|
WLED3_CTRL_REG_MOD_EN,
|
|
WLED3_CTRL_REG_MOD_EN_MASK,
|
|
val << WLED3_CTRL_REG_MOD_EN_SHIFT);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if (wled->ovp_irq > 0) {
|
|
if (val) {
|
|
/*
|
|
* The hardware generates a storm of spurious OVP
|
|
* interrupts during soft start operations. So defer
|
|
* enabling the IRQ for 10ms to ensure that the
|
|
* soft start is complete.
|
|
*/
|
|
schedule_delayed_work(&wled->ovp_work, HZ / 100);
|
|
} else {
|
|
if (!cancel_delayed_work_sync(&wled->ovp_work))
|
|
disable_irq(wled->ovp_irq);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wled_sync_toggle(struct wled *wled)
|
|
{
|
|
int rc;
|
|
unsigned int mask = GENMASK(wled->max_string_count - 1, 0);
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_SINK_REG_SYNC,
|
|
mask, mask);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_SINK_REG_SYNC,
|
|
mask, WLED3_SINK_REG_SYNC_CLEAR);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int wled_update_status(struct backlight_device *bl)
|
|
{
|
|
struct wled *wled = bl_get_data(bl);
|
|
u16 brightness = bl->props.brightness;
|
|
int rc = 0;
|
|
|
|
if (bl->props.power != FB_BLANK_UNBLANK ||
|
|
bl->props.fb_blank != FB_BLANK_UNBLANK ||
|
|
bl->props.state & BL_CORE_FBBLANK)
|
|
brightness = 0;
|
|
|
|
mutex_lock(&wled->lock);
|
|
if (brightness) {
|
|
rc = wled->wled_set_brightness(wled, brightness);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "wled failed to set brightness rc:%d\n",
|
|
rc);
|
|
goto unlock_mutex;
|
|
}
|
|
|
|
rc = wled_sync_toggle(wled);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
|
|
goto unlock_mutex;
|
|
}
|
|
}
|
|
|
|
if (!!brightness != !!wled->brightness) {
|
|
rc = wled_module_enable(wled, !!brightness);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "wled enable failed rc:%d\n", rc);
|
|
goto unlock_mutex;
|
|
}
|
|
}
|
|
|
|
wled->brightness = brightness;
|
|
|
|
unlock_mutex:
|
|
mutex_unlock(&wled->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
#define WLED_SHORT_DLY_MS 20
|
|
#define WLED_SHORT_CNT_MAX 5
|
|
#define WLED_SHORT_RESET_CNT_DLY_US USEC_PER_SEC
|
|
|
|
static irqreturn_t wled_short_irq_handler(int irq, void *_wled)
|
|
{
|
|
struct wled *wled = _wled;
|
|
int rc;
|
|
s64 elapsed_time;
|
|
|
|
wled->short_count++;
|
|
mutex_lock(&wled->lock);
|
|
rc = wled_module_enable(wled, false);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "wled disable failed rc:%d\n", rc);
|
|
goto unlock_mutex;
|
|
}
|
|
|
|
elapsed_time = ktime_us_delta(ktime_get(),
|
|
wled->last_short_event);
|
|
if (elapsed_time > WLED_SHORT_RESET_CNT_DLY_US)
|
|
wled->short_count = 1;
|
|
|
|
if (wled->short_count > WLED_SHORT_CNT_MAX) {
|
|
dev_err(wled->dev, "Short triggered %d times, disabling WLED forever!\n",
|
|
wled->short_count);
|
|
wled->disabled_by_short = true;
|
|
goto unlock_mutex;
|
|
}
|
|
|
|
wled->last_short_event = ktime_get();
|
|
|
|
msleep(WLED_SHORT_DLY_MS);
|
|
rc = wled_module_enable(wled, true);
|
|
if (rc < 0)
|
|
dev_err(wled->dev, "wled enable failed rc:%d\n", rc);
|
|
|
|
unlock_mutex:
|
|
mutex_unlock(&wled->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define AUTO_DETECT_BRIGHTNESS 200
|
|
|
|
static void wled_auto_string_detection(struct wled *wled)
|
|
{
|
|
int rc = 0, i;
|
|
u32 sink_config = 0, int_sts;
|
|
u8 sink_test = 0, sink_valid = 0, val;
|
|
|
|
/* Read configured sink configuration */
|
|
rc = regmap_read(wled->regmap, wled->sink_addr +
|
|
WLED4_SINK_REG_CURR_SINK, &sink_config);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to read SINK configuration rc=%d\n",
|
|
rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
/* Disable the module before starting detection */
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN,
|
|
WLED3_CTRL_REG_MOD_EN_MASK, 0);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to disable WLED module rc=%d\n", rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
/* Set low brightness across all sinks */
|
|
rc = wled4_set_brightness(wled, AUTO_DETECT_BRIGHTNESS);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to set brightness for auto detection rc=%d\n",
|
|
rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
if (wled->cfg.cabc) {
|
|
for (i = 0; i < wled->cfg.num_strings; i++) {
|
|
rc = regmap_update_bits(wled->regmap, wled->sink_addr +
|
|
WLED4_SINK_REG_STR_CABC(i),
|
|
WLED4_SINK_REG_STR_CABC_MASK,
|
|
0);
|
|
if (rc < 0)
|
|
goto failed_detect;
|
|
}
|
|
}
|
|
|
|
/* Disable all sinks */
|
|
rc = regmap_write(wled->regmap,
|
|
wled->sink_addr + WLED4_SINK_REG_CURR_SINK, 0);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to disable all sinks rc=%d\n", rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
/* Iterate through the strings one by one */
|
|
for (i = 0; i < wled->cfg.num_strings; i++) {
|
|
sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + i));
|
|
|
|
/* Enable feedback control */
|
|
rc = regmap_write(wled->regmap, wled->ctrl_addr +
|
|
WLED3_CTRL_REG_FEEDBACK_CONTROL, i + 1);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n",
|
|
i + 1, rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
/* Enable the sink */
|
|
rc = regmap_write(wled->regmap, wled->sink_addr +
|
|
WLED4_SINK_REG_CURR_SINK, sink_test);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n",
|
|
i + 1, rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
/* Enable the module */
|
|
rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
|
|
WLED3_CTRL_REG_MOD_EN,
|
|
WLED3_CTRL_REG_MOD_EN_MASK,
|
|
WLED3_CTRL_REG_MOD_EN_MASK);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to enable WLED module rc=%d\n",
|
|
rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
usleep_range(WLED_SOFT_START_DLY_US,
|
|
WLED_SOFT_START_DLY_US + 1000);
|
|
|
|
rc = regmap_read(wled->regmap, wled->ctrl_addr +
|
|
WLED3_CTRL_REG_INT_RT_STS, &int_sts);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Error in reading WLED3_CTRL_INT_RT_STS rc=%d\n",
|
|
rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
if (int_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS)
|
|
dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n",
|
|
i + 1);
|
|
else
|
|
sink_valid |= sink_test;
|
|
|
|
/* Disable the module */
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN,
|
|
WLED3_CTRL_REG_MOD_EN_MASK, 0);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to disable WLED module rc=%d\n",
|
|
rc);
|
|
goto failed_detect;
|
|
}
|
|
}
|
|
|
|
if (!sink_valid) {
|
|
dev_err(wled->dev, "No valid WLED sinks found\n");
|
|
wled->disabled_by_short = true;
|
|
goto failed_detect;
|
|
}
|
|
|
|
if (sink_valid != sink_config) {
|
|
dev_warn(wled->dev, "%x is not a valid sink configuration - using %x instead\n",
|
|
sink_config, sink_valid);
|
|
sink_config = sink_valid;
|
|
}
|
|
|
|
/* Write the new sink configuration */
|
|
rc = regmap_write(wled->regmap,
|
|
wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
|
|
sink_config);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to reconfigure the default sink rc=%d\n",
|
|
rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
/* Enable valid sinks */
|
|
for (i = 0; i < wled->cfg.num_strings; i++) {
|
|
if (wled->cfg.cabc) {
|
|
rc = regmap_update_bits(wled->regmap, wled->sink_addr +
|
|
WLED4_SINK_REG_STR_CABC(i),
|
|
WLED4_SINK_REG_STR_CABC_MASK,
|
|
WLED4_SINK_REG_STR_CABC_MASK);
|
|
if (rc < 0)
|
|
goto failed_detect;
|
|
}
|
|
|
|
if (sink_config & BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i))
|
|
val = WLED4_SINK_REG_STR_MOD_MASK;
|
|
else
|
|
val = 0x0; /* Disable modulator_en for unused sink */
|
|
|
|
rc = regmap_write(wled->regmap, wled->sink_addr +
|
|
WLED4_SINK_REG_STR_MOD_EN(i), val);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n",
|
|
rc);
|
|
goto failed_detect;
|
|
}
|
|
}
|
|
|
|
/* Restore the feedback setting */
|
|
rc = regmap_write(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_FEEDBACK_CONTROL, 0);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to restore feedback setting rc=%d\n",
|
|
rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
/* Restore brightness */
|
|
rc = wled4_set_brightness(wled, wled->brightness);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to set brightness after auto detection rc=%d\n",
|
|
rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN,
|
|
WLED3_CTRL_REG_MOD_EN_MASK,
|
|
WLED3_CTRL_REG_MOD_EN_MASK);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to enable WLED module rc=%d\n", rc);
|
|
goto failed_detect;
|
|
}
|
|
|
|
failed_detect:
|
|
return;
|
|
}
|
|
|
|
#define WLED_AUTO_DETECT_OVP_COUNT 5
|
|
#define WLED_AUTO_DETECT_CNT_DLY_US USEC_PER_SEC
|
|
static bool wled_auto_detection_required(struct wled *wled)
|
|
{
|
|
s64 elapsed_time_us;
|
|
|
|
if (!wled->cfg.auto_detection_enabled)
|
|
return false;
|
|
|
|
/*
|
|
* Check if the OVP fault was an occasional one
|
|
* or if it's firing continuously, the latter qualifies
|
|
* for an auto-detection check.
|
|
*/
|
|
if (!wled->auto_detection_ovp_count) {
|
|
wled->start_ovp_fault_time = ktime_get();
|
|
wled->auto_detection_ovp_count++;
|
|
} else {
|
|
elapsed_time_us = ktime_us_delta(ktime_get(),
|
|
wled->start_ovp_fault_time);
|
|
if (elapsed_time_us > WLED_AUTO_DETECT_CNT_DLY_US)
|
|
wled->auto_detection_ovp_count = 0;
|
|
else
|
|
wled->auto_detection_ovp_count++;
|
|
|
|
if (wled->auto_detection_ovp_count >=
|
|
WLED_AUTO_DETECT_OVP_COUNT) {
|
|
wled->auto_detection_ovp_count = 0;
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int wled_auto_detection_at_init(struct wled *wled)
|
|
{
|
|
int rc;
|
|
u32 fault_status, rt_status;
|
|
|
|
if (!wled->cfg.auto_detection_enabled)
|
|
return 0;
|
|
|
|
rc = regmap_read(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS,
|
|
&rt_status);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to read RT status rc=%d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
rc = regmap_read(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS,
|
|
&fault_status);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to read fault status rc=%d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
if ((rt_status & WLED3_CTRL_REG_OVP_FAULT_STATUS) ||
|
|
(fault_status & WLED3_CTRL_REG_OVP_FAULT_BIT)) {
|
|
mutex_lock(&wled->lock);
|
|
wled_auto_string_detection(wled);
|
|
mutex_unlock(&wled->lock);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static irqreturn_t wled_ovp_irq_handler(int irq, void *_wled)
|
|
{
|
|
struct wled *wled = _wled;
|
|
int rc;
|
|
u32 int_sts, fault_sts;
|
|
|
|
rc = regmap_read(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, &int_sts);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Error in reading WLED3_INT_RT_STS rc=%d\n",
|
|
rc);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
rc = regmap_read(wled->regmap, wled->ctrl_addr +
|
|
WLED3_CTRL_REG_FAULT_STATUS, &fault_sts);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Error in reading WLED_FAULT_STATUS rc=%d\n",
|
|
rc);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT |
|
|
WLED3_CTRL_REG_ILIM_FAULT_BIT))
|
|
dev_dbg(wled->dev, "WLED OVP fault detected, int_sts=%x fault_sts= %x\n",
|
|
int_sts, fault_sts);
|
|
|
|
if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) {
|
|
if (wled_auto_detection_required(wled)) {
|
|
mutex_lock(&wled->lock);
|
|
wled_auto_string_detection(wled);
|
|
mutex_unlock(&wled->lock);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int wled3_setup(struct wled *wled)
|
|
{
|
|
u16 addr;
|
|
u8 sink_en = 0;
|
|
int rc, i, j;
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_OVP,
|
|
WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT,
|
|
WLED3_CTRL_REG_ILIMIT_MASK,
|
|
wled->cfg.boost_i_limit);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_FREQ,
|
|
WLED3_CTRL_REG_FREQ_MASK,
|
|
wled->cfg.switch_freq);
|
|
if (rc)
|
|
return rc;
|
|
|
|
for (i = 0; i < wled->cfg.num_strings; ++i) {
|
|
j = wled->cfg.enabled_strings[i];
|
|
addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_EN(j);
|
|
rc = regmap_update_bits(wled->regmap, addr,
|
|
WLED3_SINK_REG_STR_MOD_MASK,
|
|
WLED3_SINK_REG_STR_MOD_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (wled->cfg.ext_gen) {
|
|
addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_SRC(j);
|
|
rc = regmap_update_bits(wled->regmap, addr,
|
|
WLED3_SINK_REG_STR_MOD_SRC_MASK,
|
|
WLED3_SINK_REG_STR_MOD_SRC_EXT);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
addr = wled->ctrl_addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR(j);
|
|
rc = regmap_update_bits(wled->regmap, addr,
|
|
WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK,
|
|
wled->cfg.string_i_limit);
|
|
if (rc)
|
|
return rc;
|
|
|
|
addr = wled->ctrl_addr + WLED3_SINK_REG_STR_CABC(j);
|
|
rc = regmap_update_bits(wled->regmap, addr,
|
|
WLED3_SINK_REG_STR_CABC_MASK,
|
|
wled->cfg.cabc ?
|
|
WLED3_SINK_REG_STR_CABC_MASK : 0);
|
|
if (rc)
|
|
return rc;
|
|
|
|
sink_en |= BIT(j + WLED3_SINK_REG_CURR_SINK_SHFT);
|
|
}
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_SINK_REG_CURR_SINK,
|
|
WLED3_SINK_REG_CURR_SINK_MASK, sink_en);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct wled_config wled3_config_defaults = {
|
|
.boost_i_limit = 3,
|
|
.string_i_limit = 20,
|
|
.ovp = 2,
|
|
.num_strings = 3,
|
|
.switch_freq = 5,
|
|
.cs_out_en = false,
|
|
.ext_gen = false,
|
|
.cabc = false,
|
|
.enabled_strings = {0, 1, 2, 3},
|
|
};
|
|
|
|
static int wled4_setup(struct wled *wled)
|
|
{
|
|
int rc, temp, i, j;
|
|
u16 addr;
|
|
u8 sink_en = 0;
|
|
u32 sink_cfg;
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_OVP,
|
|
WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT,
|
|
WLED3_CTRL_REG_ILIMIT_MASK,
|
|
wled->cfg.boost_i_limit);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->ctrl_addr + WLED3_CTRL_REG_FREQ,
|
|
WLED3_CTRL_REG_FREQ_MASK,
|
|
wled->cfg.switch_freq);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
if (wled->cfg.external_pfet) {
|
|
/* Unlock the secure register access */
|
|
rc = regmap_write(wled->regmap, wled->ctrl_addr +
|
|
WLED4_CTRL_REG_SEC_ACCESS,
|
|
WLED4_CTRL_REG_SEC_UNLOCK);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = regmap_write(wled->regmap,
|
|
wled->ctrl_addr + WLED4_CTRL_REG_TEST1,
|
|
WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
rc = regmap_read(wled->regmap, wled->sink_addr +
|
|
WLED4_SINK_REG_CURR_SINK, &sink_cfg);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
for (i = 0; i < wled->cfg.num_strings; i++) {
|
|
j = wled->cfg.enabled_strings[i];
|
|
temp = j + WLED4_SINK_REG_CURR_SINK_SHFT;
|
|
sink_en |= 1 << temp;
|
|
}
|
|
|
|
if (sink_cfg == sink_en) {
|
|
rc = wled_auto_detection_at_init(wled);
|
|
return rc;
|
|
}
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
|
|
WLED4_SINK_REG_CURR_SINK_MASK, 0);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
|
|
WLED3_CTRL_REG_MOD_EN,
|
|
WLED3_CTRL_REG_MOD_EN_MASK, 0);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Per sink/string configuration */
|
|
for (i = 0; i < wled->cfg.num_strings; i++) {
|
|
j = wled->cfg.enabled_strings[i];
|
|
|
|
addr = wled->sink_addr +
|
|
WLED4_SINK_REG_STR_MOD_EN(j);
|
|
rc = regmap_update_bits(wled->regmap, addr,
|
|
WLED4_SINK_REG_STR_MOD_MASK,
|
|
WLED4_SINK_REG_STR_MOD_MASK);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
addr = wled->sink_addr +
|
|
WLED4_SINK_REG_STR_FULL_SCALE_CURR(j);
|
|
rc = regmap_update_bits(wled->regmap, addr,
|
|
WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK,
|
|
wled->cfg.string_i_limit);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
addr = wled->sink_addr +
|
|
WLED4_SINK_REG_STR_CABC(j);
|
|
rc = regmap_update_bits(wled->regmap, addr,
|
|
WLED4_SINK_REG_STR_CABC_MASK,
|
|
wled->cfg.cabc ?
|
|
WLED4_SINK_REG_STR_CABC_MASK : 0);
|
|
if (rc < 0)
|
|
return rc;
|
|
}
|
|
|
|
rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
|
|
WLED3_CTRL_REG_MOD_EN,
|
|
WLED3_CTRL_REG_MOD_EN_MASK,
|
|
WLED3_CTRL_REG_MOD_EN_MASK);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = regmap_update_bits(wled->regmap,
|
|
wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
|
|
WLED4_SINK_REG_CURR_SINK_MASK, sink_en);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = wled_sync_toggle(wled);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
rc = wled_auto_detection_at_init(wled);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static const struct wled_config wled4_config_defaults = {
|
|
.boost_i_limit = 4,
|
|
.string_i_limit = 10,
|
|
.ovp = 1,
|
|
.num_strings = 4,
|
|
.switch_freq = 11,
|
|
.cabc = false,
|
|
.external_pfet = false,
|
|
.auto_detection_enabled = false,
|
|
};
|
|
|
|
static const u32 wled3_boost_i_limit_values[] = {
|
|
105, 385, 525, 805, 980, 1260, 1400, 1680,
|
|
};
|
|
|
|
static const struct wled_var_cfg wled3_boost_i_limit_cfg = {
|
|
.values = wled3_boost_i_limit_values,
|
|
.size = ARRAY_SIZE(wled3_boost_i_limit_values),
|
|
};
|
|
|
|
static const u32 wled4_boost_i_limit_values[] = {
|
|
105, 280, 450, 620, 970, 1150, 1300, 1500,
|
|
};
|
|
|
|
static const struct wled_var_cfg wled4_boost_i_limit_cfg = {
|
|
.values = wled4_boost_i_limit_values,
|
|
.size = ARRAY_SIZE(wled4_boost_i_limit_values),
|
|
};
|
|
|
|
static const u32 wled3_ovp_values[] = {
|
|
35, 32, 29, 27,
|
|
};
|
|
|
|
static const struct wled_var_cfg wled3_ovp_cfg = {
|
|
.values = wled3_ovp_values,
|
|
.size = ARRAY_SIZE(wled3_ovp_values),
|
|
};
|
|
|
|
static const u32 wled4_ovp_values[] = {
|
|
31100, 29600, 19600, 18100,
|
|
};
|
|
|
|
static const struct wled_var_cfg wled4_ovp_cfg = {
|
|
.values = wled4_ovp_values,
|
|
.size = ARRAY_SIZE(wled4_ovp_values),
|
|
};
|
|
|
|
static u32 wled3_num_strings_values_fn(u32 idx)
|
|
{
|
|
return idx + 1;
|
|
}
|
|
|
|
static const struct wled_var_cfg wled3_num_strings_cfg = {
|
|
.fn = wled3_num_strings_values_fn,
|
|
.size = 3,
|
|
};
|
|
|
|
static const struct wled_var_cfg wled4_num_strings_cfg = {
|
|
.fn = wled3_num_strings_values_fn,
|
|
.size = 4,
|
|
};
|
|
|
|
static u32 wled3_switch_freq_values_fn(u32 idx)
|
|
{
|
|
return 19200 / (2 * (1 + idx));
|
|
}
|
|
|
|
static const struct wled_var_cfg wled3_switch_freq_cfg = {
|
|
.fn = wled3_switch_freq_values_fn,
|
|
.size = 16,
|
|
};
|
|
|
|
static const struct wled_var_cfg wled3_string_i_limit_cfg = {
|
|
.size = 26,
|
|
};
|
|
|
|
static const u32 wled4_string_i_limit_values[] = {
|
|
0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000,
|
|
22500, 25000, 27500, 30000,
|
|
};
|
|
|
|
static const struct wled_var_cfg wled4_string_i_limit_cfg = {
|
|
.values = wled4_string_i_limit_values,
|
|
.size = ARRAY_SIZE(wled4_string_i_limit_values),
|
|
};
|
|
|
|
static const struct wled_var_cfg wled3_string_cfg = {
|
|
.size = 8,
|
|
};
|
|
|
|
static const struct wled_var_cfg wled4_string_cfg = {
|
|
.size = 16,
|
|
};
|
|
|
|
static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx)
|
|
{
|
|
if (idx >= cfg->size)
|
|
return UINT_MAX;
|
|
if (cfg->fn)
|
|
return cfg->fn(idx);
|
|
if (cfg->values)
|
|
return cfg->values[idx];
|
|
return idx;
|
|
}
|
|
|
|
static int wled_configure(struct wled *wled, int version)
|
|
{
|
|
struct wled_config *cfg = &wled->cfg;
|
|
struct device *dev = wled->dev;
|
|
const __be32 *prop_addr;
|
|
u32 size, val, c;
|
|
int rc, i, j, string_len;
|
|
|
|
const struct wled_u32_opts *u32_opts = NULL;
|
|
const struct wled_u32_opts wled3_opts[] = {
|
|
{
|
|
.name = "qcom,current-boost-limit",
|
|
.val_ptr = &cfg->boost_i_limit,
|
|
.cfg = &wled3_boost_i_limit_cfg,
|
|
},
|
|
{
|
|
.name = "qcom,current-limit",
|
|
.val_ptr = &cfg->string_i_limit,
|
|
.cfg = &wled3_string_i_limit_cfg,
|
|
},
|
|
{
|
|
.name = "qcom,ovp",
|
|
.val_ptr = &cfg->ovp,
|
|
.cfg = &wled3_ovp_cfg,
|
|
},
|
|
{
|
|
.name = "qcom,switching-freq",
|
|
.val_ptr = &cfg->switch_freq,
|
|
.cfg = &wled3_switch_freq_cfg,
|
|
},
|
|
{
|
|
.name = "qcom,num-strings",
|
|
.val_ptr = &cfg->num_strings,
|
|
.cfg = &wled3_num_strings_cfg,
|
|
},
|
|
};
|
|
|
|
const struct wled_u32_opts wled4_opts[] = {
|
|
{
|
|
.name = "qcom,current-boost-limit",
|
|
.val_ptr = &cfg->boost_i_limit,
|
|
.cfg = &wled4_boost_i_limit_cfg,
|
|
},
|
|
{
|
|
.name = "qcom,current-limit-microamp",
|
|
.val_ptr = &cfg->string_i_limit,
|
|
.cfg = &wled4_string_i_limit_cfg,
|
|
},
|
|
{
|
|
.name = "qcom,ovp-millivolt",
|
|
.val_ptr = &cfg->ovp,
|
|
.cfg = &wled4_ovp_cfg,
|
|
},
|
|
{
|
|
.name = "qcom,switching-freq",
|
|
.val_ptr = &cfg->switch_freq,
|
|
.cfg = &wled3_switch_freq_cfg,
|
|
},
|
|
{
|
|
.name = "qcom,num-strings",
|
|
.val_ptr = &cfg->num_strings,
|
|
.cfg = &wled4_num_strings_cfg,
|
|
},
|
|
};
|
|
|
|
const struct wled_bool_opts bool_opts[] = {
|
|
{ "qcom,cs-out", &cfg->cs_out_en, },
|
|
{ "qcom,ext-gen", &cfg->ext_gen, },
|
|
{ "qcom,cabc", &cfg->cabc, },
|
|
{ "qcom,external-pfet", &cfg->external_pfet, },
|
|
{ "qcom,auto-string-detection", &cfg->auto_detection_enabled, },
|
|
};
|
|
|
|
prop_addr = of_get_address(dev->of_node, 0, NULL, NULL);
|
|
if (!prop_addr) {
|
|
dev_err(wled->dev, "invalid IO resources\n");
|
|
return -EINVAL;
|
|
}
|
|
wled->ctrl_addr = be32_to_cpu(*prop_addr);
|
|
|
|
rc = of_property_read_string(dev->of_node, "label", &wled->name);
|
|
if (rc)
|
|
wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node);
|
|
|
|
switch (version) {
|
|
case 3:
|
|
u32_opts = wled3_opts;
|
|
size = ARRAY_SIZE(wled3_opts);
|
|
*cfg = wled3_config_defaults;
|
|
wled->wled_set_brightness = wled3_set_brightness;
|
|
wled->max_string_count = 3;
|
|
wled->sink_addr = wled->ctrl_addr;
|
|
break;
|
|
|
|
case 4:
|
|
u32_opts = wled4_opts;
|
|
size = ARRAY_SIZE(wled4_opts);
|
|
*cfg = wled4_config_defaults;
|
|
wled->wled_set_brightness = wled4_set_brightness;
|
|
wled->max_string_count = 4;
|
|
|
|
prop_addr = of_get_address(dev->of_node, 1, NULL, NULL);
|
|
if (!prop_addr) {
|
|
dev_err(wled->dev, "invalid IO resources\n");
|
|
return -EINVAL;
|
|
}
|
|
wled->sink_addr = be32_to_cpu(*prop_addr);
|
|
break;
|
|
|
|
default:
|
|
dev_err(wled->dev, "Invalid WLED version\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < size; ++i) {
|
|
rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val);
|
|
if (rc == -EINVAL) {
|
|
continue;
|
|
} else if (rc) {
|
|
dev_err(dev, "error reading '%s'\n", u32_opts[i].name);
|
|
return rc;
|
|
}
|
|
|
|
c = UINT_MAX;
|
|
for (j = 0; c != val; j++) {
|
|
c = wled_values(u32_opts[i].cfg, j);
|
|
if (c == UINT_MAX) {
|
|
dev_err(dev, "invalid value for '%s'\n",
|
|
u32_opts[i].name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (c == val)
|
|
break;
|
|
}
|
|
|
|
dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c);
|
|
*u32_opts[i].val_ptr = j;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bool_opts); ++i) {
|
|
if (of_property_read_bool(dev->of_node, bool_opts[i].name))
|
|
*bool_opts[i].val_ptr = true;
|
|
}
|
|
|
|
cfg->num_strings = cfg->num_strings + 1;
|
|
|
|
string_len = of_property_count_elems_of_size(dev->of_node,
|
|
"qcom,enabled-strings",
|
|
sizeof(u32));
|
|
if (string_len > 0)
|
|
of_property_read_u32_array(dev->of_node,
|
|
"qcom,enabled-strings",
|
|
wled->cfg.enabled_strings,
|
|
sizeof(u32));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wled_configure_short_irq(struct wled *wled,
|
|
struct platform_device *pdev)
|
|
{
|
|
int rc;
|
|
|
|
if (!wled->has_short_detect)
|
|
return 0;
|
|
|
|
rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
|
|
WLED4_CTRL_REG_SHORT_PROTECT,
|
|
WLED4_CTRL_REG_SHORT_EN_MASK,
|
|
WLED4_CTRL_REG_SHORT_EN_MASK);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
wled->short_irq = platform_get_irq_byname(pdev, "short");
|
|
if (wled->short_irq < 0) {
|
|
dev_dbg(&pdev->dev, "short irq is not used\n");
|
|
return 0;
|
|
}
|
|
|
|
rc = devm_request_threaded_irq(wled->dev, wled->short_irq,
|
|
NULL, wled_short_irq_handler,
|
|
IRQF_ONESHOT,
|
|
"wled_short_irq", wled);
|
|
if (rc < 0)
|
|
dev_err(wled->dev, "Unable to request short_irq (err:%d)\n",
|
|
rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int wled_configure_ovp_irq(struct wled *wled,
|
|
struct platform_device *pdev)
|
|
{
|
|
int rc;
|
|
u32 val;
|
|
|
|
wled->ovp_irq = platform_get_irq_byname(pdev, "ovp");
|
|
if (wled->ovp_irq < 0) {
|
|
dev_dbg(&pdev->dev, "OVP IRQ not found - disabling automatic string detection\n");
|
|
return 0;
|
|
}
|
|
|
|
rc = devm_request_threaded_irq(wled->dev, wled->ovp_irq, NULL,
|
|
wled_ovp_irq_handler, IRQF_ONESHOT,
|
|
"wled_ovp_irq", wled);
|
|
if (rc < 0) {
|
|
dev_err(wled->dev, "Unable to request ovp_irq (err:%d)\n",
|
|
rc);
|
|
wled->ovp_irq = 0;
|
|
return 0;
|
|
}
|
|
|
|
rc = regmap_read(wled->regmap, wled->ctrl_addr +
|
|
WLED3_CTRL_REG_MOD_EN, &val);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Keep OVP irq disabled until module is enabled */
|
|
if (!(val & WLED3_CTRL_REG_MOD_EN_MASK))
|
|
disable_irq(wled->ovp_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct backlight_ops wled_ops = {
|
|
.update_status = wled_update_status,
|
|
};
|
|
|
|
static int wled_probe(struct platform_device *pdev)
|
|
{
|
|
struct backlight_properties props;
|
|
struct backlight_device *bl;
|
|
struct wled *wled;
|
|
struct regmap *regmap;
|
|
int version;
|
|
u32 val;
|
|
int rc;
|
|
|
|
regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!regmap) {
|
|
dev_err(&pdev->dev, "Unable to get regmap\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL);
|
|
if (!wled)
|
|
return -ENOMEM;
|
|
|
|
wled->regmap = regmap;
|
|
wled->dev = &pdev->dev;
|
|
|
|
version = (uintptr_t)of_device_get_match_data(&pdev->dev);
|
|
if (!version) {
|
|
dev_err(&pdev->dev, "Unknown device version\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_init(&wled->lock);
|
|
rc = wled_configure(wled, version);
|
|
if (rc)
|
|
return rc;
|
|
|
|
switch (version) {
|
|
case 3:
|
|
wled->cfg.auto_detection_enabled = false;
|
|
rc = wled3_setup(wled);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "wled3_setup failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
|
|
case 4:
|
|
wled->has_short_detect = true;
|
|
rc = wled4_setup(wled);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "wled4_setup failed\n");
|
|
return rc;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
dev_err(wled->dev, "Invalid WLED version\n");
|
|
break;
|
|
}
|
|
|
|
INIT_DELAYED_WORK(&wled->ovp_work, wled_ovp_work);
|
|
|
|
rc = wled_configure_short_irq(wled, pdev);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
rc = wled_configure_ovp_irq(wled, pdev);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
val = WLED_DEFAULT_BRIGHTNESS;
|
|
of_property_read_u32(pdev->dev.of_node, "default-brightness", &val);
|
|
|
|
memset(&props, 0, sizeof(struct backlight_properties));
|
|
props.type = BACKLIGHT_RAW;
|
|
props.brightness = val;
|
|
props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX;
|
|
bl = devm_backlight_device_register(&pdev->dev, wled->name,
|
|
&pdev->dev, wled,
|
|
&wled_ops, &props);
|
|
return PTR_ERR_OR_ZERO(bl);
|
|
};
|
|
|
|
static int wled_remove(struct platform_device *pdev)
|
|
{
|
|
struct wled *wled = dev_get_drvdata(&pdev->dev);
|
|
|
|
mutex_destroy(&wled->lock);
|
|
cancel_delayed_work_sync(&wled->ovp_work);
|
|
disable_irq(wled->short_irq);
|
|
disable_irq(wled->ovp_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id wled_match_table[] = {
|
|
{ .compatible = "qcom,pm8941-wled", .data = (void *)3 },
|
|
{ .compatible = "qcom,pmi8998-wled", .data = (void *)4 },
|
|
{ .compatible = "qcom,pm660l-wled", .data = (void *)4 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, wled_match_table);
|
|
|
|
static struct platform_driver wled_driver = {
|
|
.probe = wled_probe,
|
|
.remove = wled_remove,
|
|
.driver = {
|
|
.name = "qcom,wled",
|
|
.of_match_table = wled_match_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(wled_driver);
|
|
|
|
MODULE_DESCRIPTION("Qualcomm WLED driver");
|
|
MODULE_LICENSE("GPL v2");
|