linux/drivers/input/serio/i8042.c

1273 lines
29 KiB
C

/*
* i8042 keyboard and mouse controller driver for Linux
*
* Copyright (c) 1999-2004 Vojtech Pavlik
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/err.h>
#include <linux/rcupdate.h>
#include <linux/platform_device.h>
#include <linux/i8042.h>
#include <asm/io.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver");
MODULE_LICENSE("GPL");
static unsigned int i8042_nokbd;
module_param_named(nokbd, i8042_nokbd, bool, 0);
MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port.");
static unsigned int i8042_noaux;
module_param_named(noaux, i8042_noaux, bool, 0);
MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port.");
static unsigned int i8042_nomux;
module_param_named(nomux, i8042_nomux, bool, 0);
MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present.");
static unsigned int i8042_unlock;
module_param_named(unlock, i8042_unlock, bool, 0);
MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
static unsigned int i8042_reset;
module_param_named(reset, i8042_reset, bool, 0);
MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
static unsigned int i8042_direct;
module_param_named(direct, i8042_direct, bool, 0);
MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode.");
static unsigned int i8042_dumbkbd;
module_param_named(dumbkbd, i8042_dumbkbd, bool, 0);
MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard");
static unsigned int i8042_noloop;
module_param_named(noloop, i8042_noloop, bool, 0);
MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port");
static unsigned int i8042_blink_frequency = 500;
module_param_named(panicblink, i8042_blink_frequency, uint, 0600);
MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics");
#ifdef CONFIG_X86
static unsigned int i8042_dritek;
module_param_named(dritek, i8042_dritek, bool, 0);
MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension");
#endif
#ifdef CONFIG_PNP
static int i8042_nopnp;
module_param_named(nopnp, i8042_nopnp, bool, 0);
MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
#endif
#define DEBUG
#ifdef DEBUG
static int i8042_debug;
module_param_named(debug, i8042_debug, bool, 0600);
MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off");
#endif
#include "i8042.h"
static DEFINE_SPINLOCK(i8042_lock);
struct i8042_port {
struct serio *serio;
int irq;
unsigned char exists;
signed char mux;
};
#define I8042_KBD_PORT_NO 0
#define I8042_AUX_PORT_NO 1
#define I8042_MUX_PORT_NO 2
#define I8042_NUM_PORTS (I8042_NUM_MUX_PORTS + 2)
static struct i8042_port i8042_ports[I8042_NUM_PORTS];
static unsigned char i8042_initial_ctr;
static unsigned char i8042_ctr;
static unsigned char i8042_mux_present;
static unsigned char i8042_kbd_irq_registered;
static unsigned char i8042_aux_irq_registered;
static unsigned char i8042_suppress_kbd_ack;
static struct platform_device *i8042_platform_device;
static irqreturn_t i8042_interrupt(int irq, void *dev_id);
/*
* The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
* be ready for reading values from it / writing values to it.
* Called always with i8042_lock held.
*/
static int i8042_wait_read(void)
{
int i = 0;
while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) {
udelay(50);
i++;
}
return -(i == I8042_CTL_TIMEOUT);
}
static int i8042_wait_write(void)
{
int i = 0;
while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) {
udelay(50);
i++;
}
return -(i == I8042_CTL_TIMEOUT);
}
/*
* i8042_flush() flushes all data that may be in the keyboard and mouse buffers
* of the i8042 down the toilet.
*/
static int i8042_flush(void)
{
unsigned long flags;
unsigned char data, str;
int i = 0;
spin_lock_irqsave(&i8042_lock, flags);
while (((str = i8042_read_status()) & I8042_STR_OBF) && (i < I8042_BUFFER_SIZE)) {
udelay(50);
data = i8042_read_data();
i++;
dbg("%02x <- i8042 (flush, %s)", data,
str & I8042_STR_AUXDATA ? "aux" : "kbd");
}
spin_unlock_irqrestore(&i8042_lock, flags);
return i;
}
/*
* i8042_command() executes a command on the i8042. It also sends the input
* parameter(s) of the commands to it, and receives the output value(s). The
* parameters are to be stored in the param array, and the output is placed
* into the same array. The number of the parameters and output values is
* encoded in bits 8-11 of the command number.
*/
static int __i8042_command(unsigned char *param, int command)
{
int i, error;
if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
return -1;
error = i8042_wait_write();
if (error)
return error;
dbg("%02x -> i8042 (command)", command & 0xff);
i8042_write_command(command & 0xff);
for (i = 0; i < ((command >> 12) & 0xf); i++) {
error = i8042_wait_write();
if (error)
return error;
dbg("%02x -> i8042 (parameter)", param[i]);
i8042_write_data(param[i]);
}
for (i = 0; i < ((command >> 8) & 0xf); i++) {
error = i8042_wait_read();
if (error) {
dbg(" -- i8042 (timeout)");
return error;
}
if (command == I8042_CMD_AUX_LOOP &&
!(i8042_read_status() & I8042_STR_AUXDATA)) {
dbg(" -- i8042 (auxerr)");
return -1;
}
param[i] = i8042_read_data();
dbg("%02x <- i8042 (return)", param[i]);
}
return 0;
}
int i8042_command(unsigned char *param, int command)
{
unsigned long flags;
int retval;
spin_lock_irqsave(&i8042_lock, flags);
retval = __i8042_command(param, command);
spin_unlock_irqrestore(&i8042_lock, flags);
return retval;
}
EXPORT_SYMBOL(i8042_command);
/*
* i8042_kbd_write() sends a byte out through the keyboard interface.
*/
static int i8042_kbd_write(struct serio *port, unsigned char c)
{
unsigned long flags;
int retval = 0;
spin_lock_irqsave(&i8042_lock, flags);
if (!(retval = i8042_wait_write())) {
dbg("%02x -> i8042 (kbd-data)", c);
i8042_write_data(c);
}
spin_unlock_irqrestore(&i8042_lock, flags);
return retval;
}
/*
* i8042_aux_write() sends a byte out through the aux interface.
*/
static int i8042_aux_write(struct serio *serio, unsigned char c)
{
struct i8042_port *port = serio->port_data;
return i8042_command(&c, port->mux == -1 ?
I8042_CMD_AUX_SEND :
I8042_CMD_MUX_SEND + port->mux);
}
/*
* i8042_start() is called by serio core when port is about to finish
* registering. It will mark port as existing so i8042_interrupt can
* start sending data through it.
*/
static int i8042_start(struct serio *serio)
{
struct i8042_port *port = serio->port_data;
port->exists = 1;
mb();
return 0;
}
/*
* i8042_stop() marks serio port as non-existing so i8042_interrupt
* will not try to send data to the port that is about to go away.
* The function is called by serio core as part of unregister procedure.
*/
static void i8042_stop(struct serio *serio)
{
struct i8042_port *port = serio->port_data;
port->exists = 0;
/*
* We synchronize with both AUX and KBD IRQs because there is
* a (very unlikely) chance that AUX IRQ is raised for KBD port
* and vice versa.
*/
synchronize_irq(I8042_AUX_IRQ);
synchronize_irq(I8042_KBD_IRQ);
port->serio = NULL;
}
/*
* i8042_interrupt() is the most important function in this driver -
* it handles the interrupts from the i8042, and sends incoming bytes
* to the upper layers.
*/
static irqreturn_t i8042_interrupt(int irq, void *dev_id)
{
struct i8042_port *port;
unsigned long flags;
unsigned char str, data;
unsigned int dfl;
unsigned int port_no;
int ret = 1;
spin_lock_irqsave(&i8042_lock, flags);
str = i8042_read_status();
if (unlikely(~str & I8042_STR_OBF)) {
spin_unlock_irqrestore(&i8042_lock, flags);
if (irq) dbg("Interrupt %d, without any data", irq);
ret = 0;
goto out;
}
data = i8042_read_data();
spin_unlock_irqrestore(&i8042_lock, flags);
if (i8042_mux_present && (str & I8042_STR_AUXDATA)) {
static unsigned long last_transmit;
static unsigned char last_str;
dfl = 0;
if (str & I8042_STR_MUXERR) {
dbg("MUX error, status is %02x, data is %02x", str, data);
/*
* When MUXERR condition is signalled the data register can only contain
* 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
* it is not always the case. Some KBCs also report 0xfc when there is
* nothing connected to the port while others sometimes get confused which
* port the data came from and signal error leaving the data intact. They
* _do not_ revert to legacy mode (actually I've never seen KBC reverting
* to legacy mode yet, when we see one we'll add proper handling).
* Anyway, we process 0xfc, 0xfd, 0xfe and 0xff as timeouts, and for the
* rest assume that the data came from the same serio last byte
* was transmitted (if transmission happened not too long ago).
*/
switch (data) {
default:
if (time_before(jiffies, last_transmit + HZ/10)) {
str = last_str;
break;
}
/* fall through - report timeout */
case 0xfc:
case 0xfd:
case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break;
case 0xff: dfl = SERIO_PARITY; data = 0xfe; break;
}
}
port_no = I8042_MUX_PORT_NO + ((str >> 6) & 3);
last_str = str;
last_transmit = jiffies;
} else {
dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) |
((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0);
port_no = (str & I8042_STR_AUXDATA) ?
I8042_AUX_PORT_NO : I8042_KBD_PORT_NO;
}
port = &i8042_ports[port_no];
dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
data, port_no, irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
dfl & SERIO_TIMEOUT ? ", timeout" : "");
if (unlikely(i8042_suppress_kbd_ack))
if (port_no == I8042_KBD_PORT_NO &&
(data == 0xfa || data == 0xfe)) {
i8042_suppress_kbd_ack--;
goto out;
}
if (likely(port->exists))
serio_interrupt(port->serio, data, dfl);
out:
return IRQ_RETVAL(ret);
}
/*
* i8042_enable_kbd_port enables keybaord port on chip
*/
static int i8042_enable_kbd_port(void)
{
i8042_ctr &= ~I8042_CTR_KBDDIS;
i8042_ctr |= I8042_CTR_KBDINT;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
i8042_ctr &= ~I8042_CTR_KBDINT;
i8042_ctr |= I8042_CTR_KBDDIS;
printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
return -EIO;
}
return 0;
}
/*
* i8042_enable_aux_port enables AUX (mouse) port on chip
*/
static int i8042_enable_aux_port(void)
{
i8042_ctr &= ~I8042_CTR_AUXDIS;
i8042_ctr |= I8042_CTR_AUXINT;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
i8042_ctr &= ~I8042_CTR_AUXINT;
i8042_ctr |= I8042_CTR_AUXDIS;
printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
return -EIO;
}
return 0;
}
/*
* i8042_enable_mux_ports enables 4 individual AUX ports after
* the controller has been switched into Multiplexed mode
*/
static int i8042_enable_mux_ports(void)
{
unsigned char param;
int i;
for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
i8042_command(&param, I8042_CMD_MUX_PFX + i);
i8042_command(&param, I8042_CMD_AUX_ENABLE);
}
return i8042_enable_aux_port();
}
/*
* i8042_set_mux_mode checks whether the controller has an active
* multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode.
*/
static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
{
unsigned char param;
/*
* Get rid of bytes in the queue.
*/
i8042_flush();
/*
* Internal loopback test - send three bytes, they should come back from the
* mouse interface, the last should be version.
*/
param = 0xf0;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xf0)
return -1;
param = mode ? 0x56 : 0xf6;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != (mode ? 0x56 : 0xf6))
return -1;
param = mode ? 0xa4 : 0xa5;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0xa4 : 0xa5))
return -1;
if (mux_version)
*mux_version = param;
return 0;
}
/*
* i8042_check_mux() checks whether the controller supports the PS/2 Active
* Multiplexing specification by Synaptics, Phoenix, Insyde and
* LCS/Telegraphics.
*/
static int __devinit i8042_check_mux(void)
{
unsigned char mux_version;
if (i8042_set_mux_mode(1, &mux_version))
return -1;
/*
* Workaround for interference with USB Legacy emulation
* that causes a v10.12 MUX to be found.
*/
if (mux_version == 0xAC)
return -1;
printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
(mux_version >> 4) & 0xf, mux_version & 0xf);
/*
* Disable all muxed ports by disabling AUX.
*/
i8042_ctr |= I8042_CTR_AUXDIS;
i8042_ctr &= ~I8042_CTR_AUXINT;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
return -EIO;
}
i8042_mux_present = 1;
return 0;
}
/*
* The following is used to test AUX IRQ delivery.
*/
static struct completion i8042_aux_irq_delivered __devinitdata;
static int i8042_irq_being_tested __devinitdata;
static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id)
{
unsigned long flags;
unsigned char str, data;
int ret = 0;
spin_lock_irqsave(&i8042_lock, flags);
str = i8042_read_status();
if (str & I8042_STR_OBF) {
data = i8042_read_data();
if (i8042_irq_being_tested &&
data == 0xa5 && (str & I8042_STR_AUXDATA))
complete(&i8042_aux_irq_delivered);
ret = 1;
}
spin_unlock_irqrestore(&i8042_lock, flags);
return IRQ_RETVAL(ret);
}
/*
* i8042_toggle_aux - enables or disables AUX port on i8042 via command and
* verifies success by readinng CTR. Used when testing for presence of AUX
* port.
*/
static int __devinit i8042_toggle_aux(int on)
{
unsigned char param;
int i;
if (i8042_command(&param,
on ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE))
return -1;
/* some chips need some time to set the I8042_CTR_AUXDIS bit */
for (i = 0; i < 100; i++) {
udelay(50);
if (i8042_command(&param, I8042_CMD_CTL_RCTR))
return -1;
if (!(param & I8042_CTR_AUXDIS) == on)
return 0;
}
return -1;
}
/*
* i8042_check_aux() applies as much paranoia as it can at detecting
* the presence of an AUX interface.
*/
static int __devinit i8042_check_aux(void)
{
int retval = -1;
int irq_registered = 0;
int aux_loop_broken = 0;
unsigned long flags;
unsigned char param;
/*
* Get rid of bytes in the queue.
*/
i8042_flush();
/*
* Internal loopback test - filters out AT-type i8042's. Unfortunately
* SiS screwed up and their 5597 doesn't support the LOOP command even
* though it has an AUX port.
*/
param = 0x5a;
retval = i8042_command(&param, I8042_CMD_AUX_LOOP);
if (retval || param != 0x5a) {
/*
* External connection test - filters out AT-soldered PS/2 i8042's
* 0x00 - no error, 0x01-0x03 - clock/data stuck, 0xff - general error
* 0xfa - no error on some notebooks which ignore the spec
* Because it's common for chipsets to return error on perfectly functioning
* AUX ports, we test for this only when the LOOP command failed.
*/
if (i8042_command(&param, I8042_CMD_AUX_TEST) ||
(param && param != 0xfa && param != 0xff))
return -1;
/*
* If AUX_LOOP completed without error but returned unexpected data
* mark it as broken
*/
if (!retval)
aux_loop_broken = 1;
}
/*
* Bit assignment test - filters out PS/2 i8042's in AT mode
*/
if (i8042_toggle_aux(0)) {
printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
}
if (i8042_toggle_aux(1))
return -1;
/*
* Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and
* used it for a PCI card or somethig else.
*/
if (i8042_noloop || aux_loop_broken) {
/*
* Without LOOP command we can't test AUX IRQ delivery. Assume the port
* is working and hope we are right.
*/
retval = 0;
goto out;
}
if (request_irq(I8042_AUX_IRQ, i8042_aux_test_irq, IRQF_SHARED,
"i8042", i8042_platform_device))
goto out;
irq_registered = 1;
if (i8042_enable_aux_port())
goto out;
spin_lock_irqsave(&i8042_lock, flags);
init_completion(&i8042_aux_irq_delivered);
i8042_irq_being_tested = 1;
param = 0xa5;
retval = __i8042_command(&param, I8042_CMD_AUX_LOOP & 0xf0ff);
spin_unlock_irqrestore(&i8042_lock, flags);
if (retval)
goto out;
if (wait_for_completion_timeout(&i8042_aux_irq_delivered,
msecs_to_jiffies(250)) == 0) {
/*
* AUX IRQ was never delivered so we need to flush the controller to
* get rid of the byte we put there; otherwise keyboard may not work.
*/
i8042_flush();
retval = -1;
}
out:
/*
* Disable the interface.
*/
i8042_ctr |= I8042_CTR_AUXDIS;
i8042_ctr &= ~I8042_CTR_AUXINT;
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
retval = -1;
if (irq_registered)
free_irq(I8042_AUX_IRQ, i8042_platform_device);
return retval;
}
static int i8042_controller_check(void)
{
if (i8042_flush() == I8042_BUFFER_SIZE) {
printk(KERN_ERR "i8042.c: No controller found.\n");
return -ENODEV;
}
return 0;
}
static int i8042_controller_selftest(void)
{
unsigned char param;
if (!i8042_reset)
return 0;
if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
return -ENODEV;
}
if (param != I8042_RET_CTL_TEST) {
printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
param, I8042_RET_CTL_TEST);
return -EIO;
}
return 0;
}
/*
* i8042_controller init initializes the i8042 controller, and,
* most importantly, sets it into non-xlated mode if that's
* desired.
*/
static int i8042_controller_init(void)
{
unsigned long flags;
/*
* Save the CTR for restoral on unload / reboot.
*/
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
return -EIO;
}
i8042_initial_ctr = i8042_ctr;
/*
* Disable the keyboard interface and interrupt.
*/
i8042_ctr |= I8042_CTR_KBDDIS;
i8042_ctr &= ~I8042_CTR_KBDINT;
/*
* Handle keylock.
*/
spin_lock_irqsave(&i8042_lock, flags);
if (~i8042_read_status() & I8042_STR_KEYLOCK) {
if (i8042_unlock)
i8042_ctr |= I8042_CTR_IGNKEYLOCK;
else
printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
}
spin_unlock_irqrestore(&i8042_lock, flags);
/*
* If the chip is configured into nontranslated mode by the BIOS, don't
* bother enabling translating and be happy.
*/
if (~i8042_ctr & I8042_CTR_XLATE)
i8042_direct = 1;
/*
* Set nontranslated mode for the kbd interface if requested by an option.
* After this the kbd interface becomes a simple serial in/out, like the aux
* interface is. We don't do this by default, since it can confuse notebook
* BIOSes.
*/
if (i8042_direct)
i8042_ctr &= ~I8042_CTR_XLATE;
/*
* Write CTR back.
*/
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
return -EIO;
}
return 0;
}
/*
* Reset the controller and reset CRT to the original value set by BIOS.
*/
static void i8042_controller_reset(void)
{
i8042_flush();
/*
* Disable both KBD and AUX interfaces so they don't get in the way
*/
i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS;
i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
/*
* Disable MUX mode if present.
*/
if (i8042_mux_present)
i8042_set_mux_mode(0, NULL);
/*
* Reset the controller if requested.
*/
i8042_controller_selftest();
/*
* Restore the original control register setting.
*/
if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
}
/*
* i8042_panic_blink() will flash the keyboard LEDs and is called when
* kernel panics. Flashing LEDs is useful for users running X who may
* not see the console and will help distingushing panics from "real"
* lockups.
*
* Note that DELAY has a limit of 10ms so we will not get stuck here
* waiting for KBC to free up even if KBD interrupt is off
*/
#define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0)
static long i8042_panic_blink(long count)
{
long delay = 0;
static long last_blink;
static char led;
/*
* We expect frequency to be about 1/2s. KDB uses about 1s.
* Make sure they are different.
*/
if (!i8042_blink_frequency)
return 0;
if (count - last_blink < i8042_blink_frequency)
return 0;
led ^= 0x01 | 0x04;
while (i8042_read_status() & I8042_STR_IBF)
DELAY;
dbg("%02x -> i8042 (panic blink)", 0xed);
i8042_suppress_kbd_ack = 2;
i8042_write_data(0xed); /* set leds */
DELAY;
while (i8042_read_status() & I8042_STR_IBF)
DELAY;
DELAY;
dbg("%02x -> i8042 (panic blink)", led);
i8042_write_data(led);
DELAY;
last_blink = count;
return delay;
}
#undef DELAY
#ifdef CONFIG_PM
/*
* Here we try to restore the original BIOS settings. We only want to
* do that once, when we really suspend, not when we taking memory
* snapshot for swsusp (in this case we'll perform required cleanup
* as part of shutdown process).
*/
static int i8042_suspend(struct platform_device *dev, pm_message_t state)
{
if (dev->dev.power.power_state.event != state.event) {
if (state.event == PM_EVENT_SUSPEND)
i8042_controller_reset();
dev->dev.power.power_state = state;
}
return 0;
}
/*
* Here we try to reset everything back to a state in which suspended
*/
static int i8042_resume(struct platform_device *dev)
{
int error;
/*
* Do not bother with restoring state if we haven't suspened yet
*/
if (dev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
error = i8042_controller_check();
if (error)
return error;
error = i8042_controller_selftest();
if (error)
return error;
/*
* Restore original CTR value and disable all ports
*/
i8042_ctr = i8042_initial_ctr;
if (i8042_direct)
i8042_ctr &= ~I8042_CTR_XLATE;
i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
printk(KERN_ERR "i8042: Can't write CTR to resume\n");
return -EIO;
}
if (i8042_mux_present) {
if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
printk(KERN_WARNING
"i8042: failed to resume active multiplexor, "
"mouse won't work.\n");
} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
i8042_enable_aux_port();
if (i8042_ports[I8042_KBD_PORT_NO].serio)
i8042_enable_kbd_port();
i8042_interrupt(0, NULL);
dev->dev.power.power_state = PMSG_ON;
return 0;
}
#endif /* CONFIG_PM */
/*
* We need to reset the 8042 back to original mode on system shutdown,
* because otherwise BIOSes will be confused.
*/
static void i8042_shutdown(struct platform_device *dev)
{
i8042_controller_reset();
}
static int __devinit i8042_create_kbd_port(void)
{
struct serio *serio;
struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO];
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!serio)
return -ENOMEM;
serio->id.type = i8042_direct ? SERIO_8042 : SERIO_8042_XL;
serio->write = i8042_dumbkbd ? NULL : i8042_kbd_write;
serio->start = i8042_start;
serio->stop = i8042_stop;
serio->port_data = port;
serio->dev.parent = &i8042_platform_device->dev;
strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name));
strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
port->serio = serio;
port->irq = I8042_KBD_IRQ;
return 0;
}
static int __devinit i8042_create_aux_port(int idx)
{
struct serio *serio;
int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx;
struct i8042_port *port = &i8042_ports[port_no];
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!serio)
return -ENOMEM;
serio->id.type = SERIO_8042;
serio->write = i8042_aux_write;
serio->start = i8042_start;
serio->stop = i8042_stop;
serio->port_data = port;
serio->dev.parent = &i8042_platform_device->dev;
if (idx < 0) {
strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name));
strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
} else {
snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);
snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1);
}
port->serio = serio;
port->mux = idx;
port->irq = I8042_AUX_IRQ;
return 0;
}
static void __devinit i8042_free_kbd_port(void)
{
kfree(i8042_ports[I8042_KBD_PORT_NO].serio);
i8042_ports[I8042_KBD_PORT_NO].serio = NULL;
}
static void __devinit i8042_free_aux_ports(void)
{
int i;
for (i = I8042_AUX_PORT_NO; i < I8042_NUM_PORTS; i++) {
kfree(i8042_ports[i].serio);
i8042_ports[i].serio = NULL;
}
}
static void __devinit i8042_register_ports(void)
{
int i;
for (i = 0; i < I8042_NUM_PORTS; i++) {
if (i8042_ports[i].serio) {
printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
i8042_ports[i].serio->name,
(unsigned long) I8042_DATA_REG,
(unsigned long) I8042_COMMAND_REG,
i8042_ports[i].irq);
serio_register_port(i8042_ports[i].serio);
}
}
}
static void __devexit i8042_unregister_ports(void)
{
int i;
for (i = 0; i < I8042_NUM_PORTS; i++) {
if (i8042_ports[i].serio) {
serio_unregister_port(i8042_ports[i].serio);
i8042_ports[i].serio = NULL;
}
}
}
static void i8042_free_irqs(void)
{
if (i8042_aux_irq_registered)
free_irq(I8042_AUX_IRQ, i8042_platform_device);
if (i8042_kbd_irq_registered)
free_irq(I8042_KBD_IRQ, i8042_platform_device);
i8042_aux_irq_registered = i8042_kbd_irq_registered = 0;
}
static int __devinit i8042_setup_aux(void)
{
int (*aux_enable)(void);
int error;
int i;
if (i8042_check_aux())
return -ENODEV;
if (i8042_nomux || i8042_check_mux()) {
error = i8042_create_aux_port(-1);
if (error)
goto err_free_ports;
aux_enable = i8042_enable_aux_port;
} else {
for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
error = i8042_create_aux_port(i);
if (error)
goto err_free_ports;
}
aux_enable = i8042_enable_mux_ports;
}
error = request_irq(I8042_AUX_IRQ, i8042_interrupt, IRQF_SHARED,
"i8042", i8042_platform_device);
if (error)
goto err_free_ports;
if (aux_enable())
goto err_free_irq;
i8042_aux_irq_registered = 1;
return 0;
err_free_irq:
free_irq(I8042_AUX_IRQ, i8042_platform_device);
err_free_ports:
i8042_free_aux_ports();
return error;
}
static int __devinit i8042_setup_kbd(void)
{
int error;
error = i8042_create_kbd_port();
if (error)
return error;
error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED,
"i8042", i8042_platform_device);
if (error)
goto err_free_port;
error = i8042_enable_kbd_port();
if (error)
goto err_free_irq;
i8042_kbd_irq_registered = 1;
return 0;
err_free_irq:
free_irq(I8042_KBD_IRQ, i8042_platform_device);
err_free_port:
i8042_free_kbd_port();
return error;
}
static int __devinit i8042_probe(struct platform_device *dev)
{
int error;
error = i8042_controller_selftest();
if (error)
return error;
error = i8042_controller_init();
if (error)
return error;
if (!i8042_noaux) {
error = i8042_setup_aux();
if (error && error != -ENODEV && error != -EBUSY)
goto out_fail;
}
if (!i8042_nokbd) {
error = i8042_setup_kbd();
if (error)
goto out_fail;
}
#ifdef CONFIG_X86
if (i8042_dritek) {
char param = 0x90;
error = i8042_command(&param, 0x1059);
if (error)
goto out_fail;
}
#endif
/*
* Ok, everything is ready, let's register all serio ports
*/
i8042_register_ports();
return 0;
out_fail:
i8042_free_aux_ports(); /* in case KBD failed but AUX not */
i8042_free_irqs();
i8042_controller_reset();
return error;
}
static int __devexit i8042_remove(struct platform_device *dev)
{
i8042_unregister_ports();
i8042_free_irqs();
i8042_controller_reset();
return 0;
}
static struct platform_driver i8042_driver = {
.driver = {
.name = "i8042",
.owner = THIS_MODULE,
},
.probe = i8042_probe,
.remove = __devexit_p(i8042_remove),
.shutdown = i8042_shutdown,
#ifdef CONFIG_PM
.suspend = i8042_suspend,
.resume = i8042_resume,
#endif
};
static int __init i8042_init(void)
{
int err;
dbg_init();
err = i8042_platform_init();
if (err)
return err;
err = i8042_controller_check();
if (err)
goto err_platform_exit;
err = platform_driver_register(&i8042_driver);
if (err)
goto err_platform_exit;
i8042_platform_device = platform_device_alloc("i8042", -1);
if (!i8042_platform_device) {
err = -ENOMEM;
goto err_unregister_driver;
}
err = platform_device_add(i8042_platform_device);
if (err)
goto err_free_device;
panic_blink = i8042_panic_blink;
return 0;
err_free_device:
platform_device_put(i8042_platform_device);
err_unregister_driver:
platform_driver_unregister(&i8042_driver);
err_platform_exit:
i8042_platform_exit();
return err;
}
static void __exit i8042_exit(void)
{
platform_device_unregister(i8042_platform_device);
platform_driver_unregister(&i8042_driver);
i8042_platform_exit();
panic_blink = NULL;
}
module_init(i8042_init);
module_exit(i8042_exit);