openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/mmc/core
History
Kuninori Morimoto ded8a5f961 mmc: cast u8 to unsigned long long to avoid unexpected error 
card->ext_csd.enhanced_area_offset is defined as "unsigned long long",
and, ext_csd[] is defined as u8.
unsigned long long data might have strange data if first bit of ext_csd[]
was 1. this patch cast it to (unsigned long long)
Special thanks to coverity <http://www.coverity.com>

ex)
        u8  data8;
        u64 data64;

        data8 = 0x80;
        data64 = (data8 << 24); // 0xffffffff80000000
        data64 = (((unsigned long long)data8) << 24); // 0x80000000;

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
 		2015-06-01 09:07:03 +02:00
..
Kconfig mmc: core: Use MMC_UNSAFE_RESUME as default behavior 2014-02-13 22:58:15 -05:00
Makefile mmc: pwrseq: add driver for emmc hardware reset 2015-02-04 09:45:09 +01:00
bus.c Revert "mmc: core: Convert mmc_driver to device_driver" 2015-04-17 11:48:01 +02:00
bus.h mmc: rename dev_to_mmc_card() to mmc_dev_to_card() 2010-10-23 21:11:12 +08:00
core.c mmc: core: Don't print reset warning if reset is not supported 2015-06-01 09:06:59 +02:00
core.h mmc: core: Add support for HS400 re-tuning 2015-06-01 09:06:57 +02:00
debugfs.c mmc: core: Use mmc_get_ext_csd() instead of mmc_send_ext_csd() 2014-11-10 12:40:44 +01:00
host.c mmc: dt: Allow to specify that no write protect signal is present 2015-06-01 09:07:00 +02:00
host.h mmc: host: Add facility to support re-tuning 2015-06-01 09:06:53 +02:00
mmc.c mmc: cast u8 to unsigned long long to avoid unexpected error 2015-06-01 09:07:03 +02:00
mmc_ops.c mmc: core: Separate out the mmc_switch status check so it can be re-used 2015-06-01 09:06:56 +02:00
mmc_ops.h mmc: core: Separate out the mmc_switch status check so it can be re-used 2015-06-01 09:06:56 +02:00
pwrseq.c mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc() 2015-04-17 10:17:19 +02:00
pwrseq.h mmc: pwrseq: simplify alloc/free hooks 2015-03-23 14:13:42 +01:00
pwrseq_emmc.c mmc: pwrseq: simplify alloc/free hooks 2015-03-23 14:13:42 +01:00
pwrseq_simple.c mmc: pwrseq: simplify alloc/free hooks 2015-03-23 14:13:42 +01:00
quirks.c mmc: quirks: Fixup debug message 2014-07-09 11:26:03 +02:00
sd.c mmc: Add support for disabling write-protect detection 2015-06-01 09:06:59 +02:00
sd.h mmc: drop the speed mode of card's state 2014-05-12 18:05:53 -04:00
sd_ops.c mmc: sd: warn if card stays busy during init 2014-07-09 11:26:07 +02:00
sd_ops.h mmc: add erase, secure erase, trim and secure trim operations 2010-08-12 08:43:30 -07:00
sdio.c mmc: core: Enable / disable re-tuning 2015-06-01 09:06:54 +02:00
sdio_bus.c mmc: Add SDIO function devicetree subnode parsing 2015-01-19 09:56:26 +01:00
sdio_bus.h
…
sdio_cis.c mmc: sdio: Change pr_warning to pr_warn_ratelimited 2012-07-22 15:25:48 -04:00
sdio_cis.h
…
sdio_io.c mmc: sdio: Use multiple scatter/gather list 2012-12-06 13:54:43 -05:00
sdio_irq.c mmc: Convert pr_warning to pr_warn 2014-09-24 10:13:09 +02:00
sdio_ops.c mmc: sdio: Use multiple scatter/gather list 2012-12-06 13:54:43 -05:00
sdio_ops.h sdio: recognize io card without powercycle 2010-03-12 15:52:28 -08:00
slot-gpio.c mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts 2015-01-19 09:56:29 +01:00
slot-gpio.h mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core 2015-01-19 09:56:17 +01:00