linux/drivers/s390/block/dasd_3990_erp.c

2716 lines
67 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* File...........: linux/drivers/s390/block/dasd_3990_erp.c
* Author(s)......: Horst Hummel <Horst.Hummel@de.ibm.com>
* Holger Smolinski <Holger.Smolinski@de.ibm.com>
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000, 2001
*
*/
#include <linux/timer.h>
#include <linux/slab.h>
#include <asm/idals.h>
#include <asm/todclk.h>
#define PRINTK_HEADER "dasd_erp(3990): "
#include "dasd_int.h"
#include "dasd_eckd.h"
struct DCTL_data {
unsigned char subcommand; /* e.g Inhibit Write, Enable Write,... */
unsigned char modifier; /* Subcommand modifier */
unsigned short res; /* reserved */
} __attribute__ ((packed));
/*
*****************************************************************************
* SECTION ERP EXAMINATION
*****************************************************************************
*/
/*
* DASD_3990_ERP_EXAMINE_24
*
* DESCRIPTION
* Checks only for fatal (unrecoverable) error.
* A detailed examination of the sense data is done later outside
* the interrupt handler.
*
* Each bit configuration leading to an action code 2 (Exit with
* programming error or unusual condition indication)
* are handled as fatal error´s.
*
* All other configurations are handled as recoverable errors.
*
* RETURN VALUES
* dasd_era_fatal for all fatal (unrecoverable errors)
* dasd_era_recover for all others.
*/
static dasd_era_t
dasd_3990_erp_examine_24(struct dasd_ccw_req * cqr, char *sense)
{
struct dasd_device *device = cqr->device;
/* check for 'Command Reject' */
if ((sense[0] & SNS0_CMD_REJECT) &&
(!(sense[2] & SNS2_ENV_DATA_PRESENT))) {
DEV_MESSAGE(KERN_ERR, device, "%s",
"EXAMINE 24: Command Reject detected - "
"fatal error");
return dasd_era_fatal;
}
/* check for 'Invalid Track Format' */
if ((sense[1] & SNS1_INV_TRACK_FORMAT) &&
(!(sense[2] & SNS2_ENV_DATA_PRESENT))) {
DEV_MESSAGE(KERN_ERR, device, "%s",
"EXAMINE 24: Invalid Track Format detected "
"- fatal error");
return dasd_era_fatal;
}
/* check for 'No Record Found' */
if (sense[1] & SNS1_NO_REC_FOUND) {
/* FIXME: fatal error ?!? */
DEV_MESSAGE(KERN_ERR, device,
"EXAMINE 24: No Record Found detected %s",
device->state <= DASD_STATE_BASIC ?
" " : "- fatal error");
return dasd_era_fatal;
}
/* return recoverable for all others */
return dasd_era_recover;
} /* END dasd_3990_erp_examine_24 */
/*
* DASD_3990_ERP_EXAMINE_32
*
* DESCRIPTION
* Checks only for fatal/no/recoverable error.
* A detailed examination of the sense data is done later outside
* the interrupt handler.
*
* RETURN VALUES
* dasd_era_none no error
* dasd_era_fatal for all fatal (unrecoverable errors)
* dasd_era_recover for recoverable others.
*/
static dasd_era_t
dasd_3990_erp_examine_32(struct dasd_ccw_req * cqr, char *sense)
{
struct dasd_device *device = cqr->device;
switch (sense[25]) {
case 0x00:
return dasd_era_none;
case 0x01:
DEV_MESSAGE(KERN_ERR, device, "%s", "EXAMINE 32: fatal error");
return dasd_era_fatal;
default:
return dasd_era_recover;
}
} /* end dasd_3990_erp_examine_32 */
/*
* DASD_3990_ERP_EXAMINE
*
* DESCRIPTION
* Checks only for fatal/no/recover error.
* A detailed examination of the sense data is done later outside
* the interrupt handler.
*
* The logic is based on the 'IBM 3990 Storage Control Reference' manual
* 'Chapter 7. Error Recovery Procedures'.
*
* RETURN VALUES
* dasd_era_none no error
* dasd_era_fatal for all fatal (unrecoverable errors)
* dasd_era_recover for all others.
*/
dasd_era_t
dasd_3990_erp_examine(struct dasd_ccw_req * cqr, struct irb * irb)
{
char *sense = irb->ecw;
dasd_era_t era = dasd_era_recover;
struct dasd_device *device = cqr->device;
/* check for successful execution first */
if (irb->scsw.cstat == 0x00 &&
irb->scsw.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END))
return dasd_era_none;
/* distinguish between 24 and 32 byte sense data */
if (sense[27] & DASD_SENSE_BIT_0) {
era = dasd_3990_erp_examine_24(cqr, sense);
} else {
era = dasd_3990_erp_examine_32(cqr, sense);
}
/* log the erp chain if fatal error occurred */
if ((era == dasd_era_fatal) && (device->state >= DASD_STATE_READY)) {
dasd_log_sense(cqr, irb);
}
return era;
} /* END dasd_3990_erp_examine */
/*
*****************************************************************************
* SECTION ERP HANDLING
*****************************************************************************
*/
/*
*****************************************************************************
* 24 and 32 byte sense ERP functions
*****************************************************************************
*/
/*
* DASD_3990_ERP_CLEANUP
*
* DESCRIPTION
* Removes the already build but not necessary ERP request and sets
* the status of the original cqr / erp to the given (final) status
*
* PARAMETER
* erp request to be blocked
* final_status either DASD_CQR_DONE or DASD_CQR_FAILED
*
* RETURN VALUES
* cqr original cqr
*/
static struct dasd_ccw_req *
dasd_3990_erp_cleanup(struct dasd_ccw_req * erp, char final_status)
{
struct dasd_ccw_req *cqr = erp->refers;
dasd_free_erp_request(erp, erp->device);
cqr->status = final_status;
return cqr;
} /* end dasd_3990_erp_cleanup */
/*
* DASD_3990_ERP_BLOCK_QUEUE
*
* DESCRIPTION
* Block the given device request queue to prevent from further
* processing until the started timer has expired or an related
* interrupt was received.
*/
static void
dasd_3990_erp_block_queue(struct dasd_ccw_req * erp, int expires)
{
struct dasd_device *device = erp->device;
DEV_MESSAGE(KERN_INFO, device,
"blocking request queue for %is", expires/HZ);
device->stopped |= DASD_STOPPED_PENDING;
erp->status = DASD_CQR_QUEUED;
dasd_set_timer(device, expires);
}
/*
* DASD_3990_ERP_INT_REQ
*
* DESCRIPTION
* Handles 'Intervention Required' error.
* This means either device offline or not installed.
*
* PARAMETER
* erp current erp
* RETURN VALUES
* erp modified erp
*/
static struct dasd_ccw_req *
dasd_3990_erp_int_req(struct dasd_ccw_req * erp)
{
struct dasd_device *device = erp->device;
/* first time set initial retry counter and erp_function */
/* and retry once without blocking queue */
/* (this enables easier enqueing of the cqr) */
if (erp->function != dasd_3990_erp_int_req) {
erp->retries = 256;
erp->function = dasd_3990_erp_int_req;
} else {
/* issue a message and wait for 'device ready' interrupt */
DEV_MESSAGE(KERN_ERR, device, "%s",
"is offline or not installed - "
"INTERVENTION REQUIRED!!");
dasd_3990_erp_block_queue(erp, 60*HZ);
}
return erp;
} /* end dasd_3990_erp_int_req */
/*
* DASD_3990_ERP_ALTERNATE_PATH
*
* DESCRIPTION
* Repeat the operation on a different channel path.
* If all alternate paths have been tried, the request is posted with a
* permanent error.
*
* PARAMETER
* erp pointer to the current ERP
*
* RETURN VALUES
* erp modified pointer to the ERP
*/
static void
dasd_3990_erp_alternate_path(struct dasd_ccw_req * erp)
{
struct dasd_device *device = erp->device;
__u8 opm;
/* try alternate valid path */
opm = ccw_device_get_path_mask(device->cdev);
//FIXME: start with get_opm ?
if (erp->lpm == 0)
erp->lpm = LPM_ANYPATH & ~(erp->irb.esw.esw0.sublog.lpum);
else
erp->lpm &= ~(erp->irb.esw.esw0.sublog.lpum);
if ((erp->lpm & opm) != 0x00) {
DEV_MESSAGE(KERN_DEBUG, device,
"try alternate lpm=%x (lpum=%x / opm=%x)",
erp->lpm, erp->irb.esw.esw0.sublog.lpum, opm);
/* reset status to queued to handle the request again... */
if (erp->status > DASD_CQR_QUEUED)
erp->status = DASD_CQR_QUEUED;
erp->retries = 1;
} else {
DEV_MESSAGE(KERN_ERR, device,
"No alternate channel path left (lpum=%x / "
"opm=%x) -> permanent error",
erp->irb.esw.esw0.sublog.lpum, opm);
/* post request with permanent error */
if (erp->status > DASD_CQR_QUEUED)
erp->status = DASD_CQR_FAILED;
}
} /* end dasd_3990_erp_alternate_path */
/*
* DASD_3990_ERP_DCTL
*
* DESCRIPTION
* Setup cqr to do the Diagnostic Control (DCTL) command with an
* Inhibit Write subcommand (0x20) and the given modifier.
*
* PARAMETER
* erp pointer to the current (failed) ERP
* modifier subcommand modifier
*
* RETURN VALUES
* dctl_cqr pointer to NEW dctl_cqr
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_DCTL(struct dasd_ccw_req * erp, char modifier)
{
struct dasd_device *device = erp->device;
struct DCTL_data *DCTL_data;
struct ccw1 *ccw;
struct dasd_ccw_req *dctl_cqr;
dctl_cqr = dasd_alloc_erp_request((char *) &erp->magic, 1,
sizeof (struct DCTL_data),
erp->device);
if (IS_ERR(dctl_cqr)) {
DEV_MESSAGE(KERN_ERR, device, "%s",
"Unable to allocate DCTL-CQR");
erp->status = DASD_CQR_FAILED;
return erp;
}
DCTL_data = dctl_cqr->data;
DCTL_data->subcommand = 0x02; /* Inhibit Write */
DCTL_data->modifier = modifier;
ccw = dctl_cqr->cpaddr;
memset(ccw, 0, sizeof (struct ccw1));
ccw->cmd_code = CCW_CMD_DCTL;
ccw->count = 4;
ccw->cda = (__u32)(addr_t) DCTL_data;
dctl_cqr->function = dasd_3990_erp_DCTL;
dctl_cqr->refers = erp;
dctl_cqr->device = erp->device;
dctl_cqr->magic = erp->magic;
dctl_cqr->expires = 5 * 60 * HZ;
dctl_cqr->retries = 2;
dctl_cqr->buildclk = get_clock();
dctl_cqr->status = DASD_CQR_FILLED;
return dctl_cqr;
} /* end dasd_3990_erp_DCTL */
/*
* DASD_3990_ERP_ACTION_1
*
* DESCRIPTION
* Setup ERP to do the ERP action 1 (see Reference manual).
* Repeat the operation on a different channel path.
* If all alternate paths have been tried, the request is posted with a
* permanent error.
* Note: duplex handling is not implemented (yet).
*
* PARAMETER
* erp pointer to the current ERP
*
* RETURN VALUES
* erp pointer to the ERP
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_action_1(struct dasd_ccw_req * erp)
{
erp->function = dasd_3990_erp_action_1;
dasd_3990_erp_alternate_path(erp);
return erp;
} /* end dasd_3990_erp_action_1 */
/*
* DASD_3990_ERP_ACTION_4
*
* DESCRIPTION
* Setup ERP to do the ERP action 4 (see Reference manual).
* Set the current request to PENDING to block the CQR queue for that device
* until the state change interrupt appears.
* Use a timer (20 seconds) to retry the cqr if the interrupt is still
* missing.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the current ERP
*
* RETURN VALUES
* erp pointer to the ERP
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_action_4(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
/* first time set initial retry counter and erp_function */
/* and retry once without waiting for state change pending */
/* interrupt (this enables easier enqueing of the cqr) */
if (erp->function != dasd_3990_erp_action_4) {
DEV_MESSAGE(KERN_INFO, device, "%s",
"dasd_3990_erp_action_4: first time retry");
erp->retries = 256;
erp->function = dasd_3990_erp_action_4;
} else {
if (sense[25] == 0x1D) { /* state change pending */
DEV_MESSAGE(KERN_INFO, device,
"waiting for state change pending "
"interrupt, %d retries left",
erp->retries);
dasd_3990_erp_block_queue(erp, 30*HZ);
} else if (sense[25] == 0x1E) { /* busy */
DEV_MESSAGE(KERN_INFO, device,
"busy - redriving request later, "
"%d retries left",
erp->retries);
dasd_3990_erp_block_queue(erp, HZ);
} else {
/* no state change pending - retry */
DEV_MESSAGE (KERN_INFO, device,
"redriving request immediately, "
"%d retries left",
erp->retries);
erp->status = DASD_CQR_QUEUED;
}
}
return erp;
} /* end dasd_3990_erp_action_4 */
/*
*****************************************************************************
* 24 byte sense ERP functions (only)
*****************************************************************************
*/
/*
* DASD_3990_ERP_ACTION_5
*
* DESCRIPTION
* Setup ERP to do the ERP action 5 (see Reference manual).
* NOTE: Further handling is done in xxx_further_erp after the retries.
*
* PARAMETER
* erp pointer to the current ERP
*
* RETURN VALUES
* erp pointer to the ERP
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_action_5(struct dasd_ccw_req * erp)
{
/* first of all retry */
erp->retries = 10;
erp->function = dasd_3990_erp_action_5;
return erp;
} /* end dasd_3990_erp_action_5 */
/*
* DASD_3990_HANDLE_ENV_DATA
*
* DESCRIPTION
* Handles 24 byte 'Environmental data present'.
* Does a analysis of the sense data (message Format)
* and prints the error messages.
*
* PARAMETER
* sense current sense data
*
* RETURN VALUES
* void
*/
static void
dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
char msg_format = (sense[7] & 0xF0);
char msg_no = (sense[7] & 0x0F);
switch (msg_format) {
case 0x00: /* Format 0 - Program or System Checks */
if (sense[1] & 0x10) { /* check message to operator bit */
switch (msg_no) {
case 0x00: /* No Message */
break;
case 0x01:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Invalid Command");
break;
case 0x02:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Invalid Command "
"Sequence");
break;
case 0x03:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - CCW Count less than "
"required");
break;
case 0x04:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Invalid Parameter");
break;
case 0x05:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Diagnostic of Sepecial"
" Command Violates File Mask");
break;
case 0x07:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Channel Returned with "
"Incorrect retry CCW");
break;
case 0x08:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Reset Notification");
break;
case 0x09:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Storage Path Restart");
break;
case 0x0A:
DEV_MESSAGE(KERN_WARNING, device,
"FORMAT 0 - Channel requested "
"... %02x", sense[8]);
break;
case 0x0B:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Invalid Defective/"
"Alternate Track Pointer");
break;
case 0x0C:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - DPS Installation "
"Check");
break;
case 0x0E:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Command Invalid on "
"Secondary Address");
break;
case 0x0F:
DEV_MESSAGE(KERN_WARNING, device,
"FORMAT 0 - Status Not As "
"Required: reason %02x", sense[8]);
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Reseved");
}
} else {
switch (msg_no) {
case 0x00: /* No Message */
break;
case 0x01:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Device Error Source");
break;
case 0x02:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Reserved");
break;
case 0x03:
DEV_MESSAGE(KERN_WARNING, device,
"FORMAT 0 - Device Fenced - "
"device = %02x", sense[4]);
break;
case 0x04:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Data Pinned for "
"Device");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 0 - Reserved");
}
}
break;
case 0x10: /* Format 1 - Device Equipment Checks */
switch (msg_no) {
case 0x00: /* No Message */
break;
case 0x01:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Device Status 1 not as "
"expected");
break;
case 0x03:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Index missing");
break;
case 0x04:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Interruption cannot be reset");
break;
case 0x05:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Device did not respond to "
"selection");
break;
case 0x06:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Device check-2 error or Set "
"Sector is not complete");
break;
case 0x07:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Head address does not "
"compare");
break;
case 0x08:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Device status 1 not valid");
break;
case 0x09:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Device not ready");
break;
case 0x0A:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Track physical address did "
"not compare");
break;
case 0x0B:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Missing device address bit");
break;
case 0x0C:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Drive motor switch is off");
break;
case 0x0D:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Seek incomplete");
break;
case 0x0E:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Cylinder address did not "
"compare");
break;
case 0x0F:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Offset active cannot be "
"reset");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 1 - Reserved");
}
break;
case 0x20: /* Format 2 - 3990 Equipment Checks */
switch (msg_no) {
case 0x08:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 2 - 3990 check-2 error");
break;
case 0x0E:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 2 - Support facility errors");
break;
case 0x0F:
DEV_MESSAGE(KERN_WARNING, device,
"FORMAT 2 - Microcode detected error %02x",
sense[8]);
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 2 - Reserved");
}
break;
case 0x30: /* Format 3 - 3990 Control Checks */
switch (msg_no) {
case 0x0F:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 3 - Allegiance terminated");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 3 - Reserved");
}
break;
case 0x40: /* Format 4 - Data Checks */
switch (msg_no) {
case 0x00:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - Home address area error");
break;
case 0x01:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - Count area error");
break;
case 0x02:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - Key area error");
break;
case 0x03:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - Data area error");
break;
case 0x04:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - No sync byte in home address "
"area");
break;
case 0x05:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - No sync byte in count address "
"area");
break;
case 0x06:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - No sync byte in key area");
break;
case 0x07:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - No sync byte in data area");
break;
case 0x08:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - Home address area error; "
"offset active");
break;
case 0x09:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - Count area error; offset "
"active");
break;
case 0x0A:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - Key area error; offset "
"active");
break;
case 0x0B:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - Data area error; "
"offset active");
break;
case 0x0C:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - No sync byte in home "
"address area; offset active");
break;
case 0x0D:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - No syn byte in count "
"address area; offset active");
break;
case 0x0E:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - No sync byte in key area; "
"offset active");
break;
case 0x0F:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - No syn byte in data area; "
"offset active");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 4 - Reserved");
}
break;
case 0x50: /* Format 5 - Data Check with displacement information */
switch (msg_no) {
case 0x00:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 5 - Data Check in the "
"home address area");
break;
case 0x01:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 5 - Data Check in the count area");
break;
case 0x02:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 5 - Data Check in the key area");
break;
case 0x03:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 5 - Data Check in the data area");
break;
case 0x08:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 5 - Data Check in the "
"home address area; offset active");
break;
case 0x09:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 5 - Data Check in the count area; "
"offset active");
break;
case 0x0A:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 5 - Data Check in the key area; "
"offset active");
break;
case 0x0B:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 5 - Data Check in the data area; "
"offset active");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 5 - Reserved");
}
break;
case 0x60: /* Format 6 - Usage Statistics/Overrun Errors */
switch (msg_no) {
case 0x00:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 6 - Overrun on channel A");
break;
case 0x01:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 6 - Overrun on channel B");
break;
case 0x02:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 6 - Overrun on channel C");
break;
case 0x03:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 6 - Overrun on channel D");
break;
case 0x04:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 6 - Overrun on channel E");
break;
case 0x05:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 6 - Overrun on channel F");
break;
case 0x06:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 6 - Overrun on channel G");
break;
case 0x07:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 6 - Overrun on channel H");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 6 - Reserved");
}
break;
case 0x70: /* Format 7 - Device Connection Control Checks */
switch (msg_no) {
case 0x00:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - RCC initiated by a connection "
"check alert");
break;
case 0x01:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - RCC 1 sequence not "
"successful");
break;
case 0x02:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - RCC 1 and RCC 2 sequences not "
"successful");
break;
case 0x03:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - Invalid tag-in during "
"selection sequence");
break;
case 0x04:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - extra RCC required");
break;
case 0x05:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - Invalid DCC selection "
"response or timeout");
break;
case 0x06:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - Missing end operation; device "
"transfer complete");
break;
case 0x07:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - Missing end operation; device "
"transfer incomplete");
break;
case 0x08:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - Invalid tag-in for an "
"immediate command sequence");
break;
case 0x09:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - Invalid tag-in for an "
"extended command sequence");
break;
case 0x0A:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - 3990 microcode time out when "
"stopping selection");
break;
case 0x0B:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - No response to selection "
"after a poll interruption");
break;
case 0x0C:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - Permanent path error (DASD "
"controller not available)");
break;
case 0x0D:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - DASD controller not available"
" on disconnected command chain");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 7 - Reserved");
}
break;
case 0x80: /* Format 8 - Additional Device Equipment Checks */
switch (msg_no) {
case 0x00: /* No Message */
case 0x01:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - Error correction code "
"hardware fault");
break;
case 0x03:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - Unexpected end operation "
"response code");
break;
case 0x04:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - End operation with transfer "
"count not zero");
break;
case 0x05:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - End operation with transfer "
"count zero");
break;
case 0x06:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - DPS checks after a system "
"reset or selective reset");
break;
case 0x07:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - DPS cannot be filled");
break;
case 0x08:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - Short busy time-out during "
"device selection");
break;
case 0x09:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - DASD controller failed to "
"set or reset the long busy latch");
break;
case 0x0A:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - No interruption from device "
"during a command chain");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 8 - Reserved");
}
break;
case 0x90: /* Format 9 - Device Read, Write, and Seek Checks */
switch (msg_no) {
case 0x00:
break; /* No Message */
case 0x06:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 9 - Device check-2 error");
break;
case 0x07:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 9 - Head address did not compare");
break;
case 0x0A:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 9 - Track physical address did "
"not compare while oriented");
break;
case 0x0E:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 9 - Cylinder address did not "
"compare");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT 9 - Reserved");
}
break;
case 0xF0: /* Format F - Cache Storage Checks */
switch (msg_no) {
case 0x00:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Operation Terminated");
break;
case 0x01:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Subsystem Processing Error");
break;
case 0x02:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Cache or nonvolatile storage "
"equipment failure");
break;
case 0x04:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Caching terminated");
break;
case 0x06:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Cache fast write access not "
"authorized");
break;
case 0x07:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Track format incorrect");
break;
case 0x09:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Caching reinitiated");
break;
case 0x0A:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Nonvolatile storage "
"terminated");
break;
case 0x0B:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Volume is suspended duplex");
/* call extended error reporting (EER) */
dasd_eer_write(device, erp->refers,
DASD_EER_PPRCSUSPEND);
break;
case 0x0C:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Subsystem status connot be "
"determined");
break;
case 0x0D:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - Caching status reset to "
"default");
break;
case 0x0E:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT F - DASD Fast Write inhibited");
break;
default:
DEV_MESSAGE(KERN_WARNING, device, "%s",
"FORMAT D - Reserved");
}
break;
default: /* unknown message format - should not happen */
DEV_MESSAGE (KERN_WARNING, device,
"unknown message format %02x",
msg_format);
break;
} /* end switch message format */
} /* end dasd_3990_handle_env_data */
/*
* DASD_3990_ERP_COM_REJ
*
* DESCRIPTION
* Handles 24 byte 'Command Reject' error.
*
* PARAMETER
* erp current erp_head
* sense current sense data
*
* RETURN VALUES
* erp 'new' erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_com_rej(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
erp->function = dasd_3990_erp_com_rej;
/* env data present (ACTION 10 - retry should work) */
if (sense[2] & SNS2_ENV_DATA_PRESENT) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Command Reject - environmental data present");
dasd_3990_handle_env_data(erp, sense);
erp->retries = 5;
} else {
/* fatal error - set status to FAILED */
DEV_MESSAGE(KERN_ERR, device, "%s",
"Command Reject - Fatal error");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
}
return erp;
} /* end dasd_3990_erp_com_rej */
/*
* DASD_3990_ERP_BUS_OUT
*
* DESCRIPTION
* Handles 24 byte 'Bus Out Parity Check' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_bus_out(struct dasd_ccw_req * erp)
{
struct dasd_device *device = erp->device;
/* first time set initial retry counter and erp_function */
/* and retry once without blocking queue */
/* (this enables easier enqueing of the cqr) */
if (erp->function != dasd_3990_erp_bus_out) {
erp->retries = 256;
erp->function = dasd_3990_erp_bus_out;
} else {
/* issue a message and wait for 'device ready' interrupt */
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"bus out parity error or BOPC requested by "
"channel");
dasd_3990_erp_block_queue(erp, 60*HZ);
}
return erp;
} /* end dasd_3990_erp_bus_out */
/*
* DASD_3990_ERP_EQUIP_CHECK
*
* DESCRIPTION
* Handles 24 byte 'Equipment Check' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_equip_check(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
erp->function = dasd_3990_erp_equip_check;
if (sense[1] & SNS1_WRITE_INHIBITED) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Write inhibited path encountered");
/* vary path offline */
DEV_MESSAGE(KERN_ERR, device, "%s",
"Path should be varied off-line. "
"This is not implemented yet \n - please report "
"to linux390@de.ibm.com");
erp = dasd_3990_erp_action_1(erp);
} else if (sense[2] & SNS2_ENV_DATA_PRESENT) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Equipment Check - " "environmental data present");
dasd_3990_handle_env_data(erp, sense);
erp = dasd_3990_erp_action_4(erp, sense);
} else if (sense[1] & SNS1_PERM_ERR) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Equipment Check - retry exhausted or "
"undesirable");
erp = dasd_3990_erp_action_1(erp);
} else {
/* all other equipment checks - Action 5 */
/* rest is done when retries == 0 */
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Equipment check or processing error");
erp = dasd_3990_erp_action_5(erp);
}
return erp;
} /* end dasd_3990_erp_equip_check */
/*
* DASD_3990_ERP_DATA_CHECK
*
* DESCRIPTION
* Handles 24 byte 'Data Check' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_data_check(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
erp->function = dasd_3990_erp_data_check;
if (sense[2] & SNS2_CORRECTABLE) { /* correctable data check */
/* issue message that the data has been corrected */
DEV_MESSAGE(KERN_EMERG, device, "%s",
"Data recovered during retry with PCI "
"fetch mode active");
/* not possible to handle this situation in Linux */
panic("No way to inform application about the possibly "
"incorrect data");
} else if (sense[2] & SNS2_ENV_DATA_PRESENT) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Uncorrectable data check recovered secondary "
"addr of duplex pair");
erp = dasd_3990_erp_action_4(erp, sense);
} else if (sense[1] & SNS1_PERM_ERR) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Uncorrectable data check with internal "
"retry exhausted");
erp = dasd_3990_erp_action_1(erp);
} else {
/* all other data checks */
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Uncorrectable data check with retry count "
"exhausted...");
erp = dasd_3990_erp_action_5(erp);
}
return erp;
} /* end dasd_3990_erp_data_check */
/*
* DASD_3990_ERP_OVERRUN
*
* DESCRIPTION
* Handles 24 byte 'Overrun' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_overrun(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
erp->function = dasd_3990_erp_overrun;
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Overrun - service overrun or overrun"
" error requested by channel");
erp = dasd_3990_erp_action_5(erp);
return erp;
} /* end dasd_3990_erp_overrun */
/*
* DASD_3990_ERP_INV_FORMAT
*
* DESCRIPTION
* Handles 24 byte 'Invalid Track Format' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_inv_format(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
erp->function = dasd_3990_erp_inv_format;
if (sense[2] & SNS2_ENV_DATA_PRESENT) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Track format error when destaging or "
"staging data");
dasd_3990_handle_env_data(erp, sense);
erp = dasd_3990_erp_action_4(erp, sense);
} else {
DEV_MESSAGE(KERN_ERR, device, "%s",
"Invalid Track Format - Fatal error should have "
"been handled within the interrupt handler");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
}
return erp;
} /* end dasd_3990_erp_inv_format */
/*
* DASD_3990_ERP_EOC
*
* DESCRIPTION
* Handles 24 byte 'End-of-Cylinder' error.
*
* PARAMETER
* erp already added default erp
* RETURN VALUES
* erp pointer to original (failed) cqr.
*/
static struct dasd_ccw_req *
dasd_3990_erp_EOC(struct dasd_ccw_req * default_erp, char *sense)
{
struct dasd_device *device = default_erp->device;
DEV_MESSAGE(KERN_ERR, device, "%s",
"End-of-Cylinder - must never happen");
/* implement action 7 - BUG */
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
} /* end dasd_3990_erp_EOC */
/*
* DASD_3990_ERP_ENV_DATA
*
* DESCRIPTION
* Handles 24 byte 'Environmental-Data Present' error.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_env_data(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
erp->function = dasd_3990_erp_env_data;
DEV_MESSAGE(KERN_DEBUG, device, "%s", "Environmental data present");
dasd_3990_handle_env_data(erp, sense);
/* don't retry on disabled interface */
if (sense[7] != 0x0F) {
erp = dasd_3990_erp_action_4(erp, sense);
} else {
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_IN_IO);
}
return erp;
} /* end dasd_3990_erp_env_data */
/*
* DASD_3990_ERP_NO_REC
*
* DESCRIPTION
* Handles 24 byte 'No Record Found' error.
*
* PARAMETER
* erp already added default ERP
*
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_no_rec(struct dasd_ccw_req * default_erp, char *sense)
{
struct dasd_device *device = default_erp->device;
DEV_MESSAGE(KERN_ERR, device, "%s",
"No Record Found - Fatal error should "
"have been handled within the interrupt handler");
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
} /* end dasd_3990_erp_no_rec */
/*
* DASD_3990_ERP_FILE_PROT
*
* DESCRIPTION
* Handles 24 byte 'File Protected' error.
* Note: Seek related recovery is not implemented because
* wee don't use the seek command yet.
*
* PARAMETER
* erp current erp_head
* RETURN VALUES
* erp new erp_head - pointer to new ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_file_prot(struct dasd_ccw_req * erp)
{
struct dasd_device *device = erp->device;
DEV_MESSAGE(KERN_ERR, device, "%s", "File Protected");
return dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
} /* end dasd_3990_erp_file_prot */
/*
* DASD_3990_ERP_INSPECT_24
*
* DESCRIPTION
* Does a detailed inspection of the 24 byte sense data
* and sets up a related error recovery action.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created default ERP
*
* RETURN VALUES
* erp pointer to the (addtitional) ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_inspect_24(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_ccw_req *erp_filled = NULL;
/* Check sense for .... */
/* 'Command Reject' */
if ((erp_filled == NULL) && (sense[0] & SNS0_CMD_REJECT)) {
erp_filled = dasd_3990_erp_com_rej(erp, sense);
}
/* 'Intervention Required' */
if ((erp_filled == NULL) && (sense[0] & SNS0_INTERVENTION_REQ)) {
erp_filled = dasd_3990_erp_int_req(erp);
}
/* 'Bus Out Parity Check' */
if ((erp_filled == NULL) && (sense[0] & SNS0_BUS_OUT_CHECK)) {
erp_filled = dasd_3990_erp_bus_out(erp);
}
/* 'Equipment Check' */
if ((erp_filled == NULL) && (sense[0] & SNS0_EQUIPMENT_CHECK)) {
erp_filled = dasd_3990_erp_equip_check(erp, sense);
}
/* 'Data Check' */
if ((erp_filled == NULL) && (sense[0] & SNS0_DATA_CHECK)) {
erp_filled = dasd_3990_erp_data_check(erp, sense);
}
/* 'Overrun' */
if ((erp_filled == NULL) && (sense[0] & SNS0_OVERRUN)) {
erp_filled = dasd_3990_erp_overrun(erp, sense);
}
/* 'Invalid Track Format' */
if ((erp_filled == NULL) && (sense[1] & SNS1_INV_TRACK_FORMAT)) {
erp_filled = dasd_3990_erp_inv_format(erp, sense);
}
/* 'End-of-Cylinder' */
if ((erp_filled == NULL) && (sense[1] & SNS1_EOC)) {
erp_filled = dasd_3990_erp_EOC(erp, sense);
}
/* 'Environmental Data' */
if ((erp_filled == NULL) && (sense[2] & SNS2_ENV_DATA_PRESENT)) {
erp_filled = dasd_3990_erp_env_data(erp, sense);
}
/* 'No Record Found' */
if ((erp_filled == NULL) && (sense[1] & SNS1_NO_REC_FOUND)) {
erp_filled = dasd_3990_erp_no_rec(erp, sense);
}
/* 'File Protected' */
if ((erp_filled == NULL) && (sense[1] & SNS1_FILE_PROTECTED)) {
erp_filled = dasd_3990_erp_file_prot(erp);
}
/* other (unknown) error - do default ERP */
if (erp_filled == NULL) {
erp_filled = erp;
}
return erp_filled;
} /* END dasd_3990_erp_inspect_24 */
/*
*****************************************************************************
* 32 byte sense ERP functions (only)
*****************************************************************************
*/
/*
* DASD_3990_ERPACTION_10_32
*
* DESCRIPTION
* Handles 32 byte 'Action 10' of Single Program Action Codes.
* Just retry and if retry doesn't work, return with error.
*
* PARAMETER
* erp current erp_head
* sense current sense data
* RETURN VALUES
* erp modified erp_head
*/
static struct dasd_ccw_req *
dasd_3990_erp_action_10_32(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
erp->retries = 256;
erp->function = dasd_3990_erp_action_10_32;
DEV_MESSAGE(KERN_DEBUG, device, "%s", "Perform logging requested");
return erp;
} /* end dasd_3990_erp_action_10_32 */
/*
* DASD_3990_ERP_ACTION_1B_32
*
* DESCRIPTION
* Handles 32 byte 'Action 1B' of Single Program Action Codes.
* A write operation could not be finished because of an unexpected
* condition.
* The already created 'default erp' is used to get the link to
* the erp chain, but it can not be used for this recovery
* action because it contains no DE/LO data space.
*
* PARAMETER
* default_erp already added default erp.
* sense current sense data
*
* RETURN VALUES
* erp new erp or
* default_erp in case of imprecise ending or error
*/
static struct dasd_ccw_req *
dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense)
{
struct dasd_device *device = default_erp->device;
__u32 cpa = 0;
struct dasd_ccw_req *cqr;
struct dasd_ccw_req *erp;
struct DE_eckd_data *DE_data;
char *LO_data; /* LO_eckd_data_t */
struct ccw1 *ccw;
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Write not finished because of unexpected condition");
default_erp->function = dasd_3990_erp_action_1B_32;
/* determine the original cqr */
cqr = default_erp;
while (cqr->refers != NULL) {
cqr = cqr->refers;
}
/* for imprecise ending just do default erp */
if (sense[1] & 0x01) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Imprecise ending is set - just retry");
return default_erp;
}
/* determine the address of the CCW to be restarted */
/* Imprecise ending is not set -> addr from IRB-SCSW */
cpa = default_erp->refers->irb.scsw.cpa;
if (cpa == 0) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Unable to determine address of the CCW "
"to be restarted");
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
}
/* Build new ERP request including DE/LO */
erp = dasd_alloc_erp_request((char *) &cqr->magic,
2 + 1,/* DE/LO + TIC */
sizeof (struct DE_eckd_data) +
sizeof (struct LO_eckd_data), device);
if (IS_ERR(erp)) {
DEV_MESSAGE(KERN_ERR, device, "%s", "Unable to allocate ERP");
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
}
/* use original DE */
DE_data = erp->data;
memcpy(DE_data, cqr->data, sizeof (struct DE_eckd_data));
/* create LO */
LO_data = erp->data + sizeof (struct DE_eckd_data);
if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) {
DEV_MESSAGE(KERN_ERR, device, "%s",
"BUG - this should not happen");
return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED);
}
if ((sense[7] & 0x3F) == 0x01) {
/* operation code is WRITE DATA -> data area orientation */
LO_data[0] = 0x81;
} else if ((sense[7] & 0x3F) == 0x03) {
/* operation code is FORMAT WRITE -> index orientation */
LO_data[0] = 0xC3;
} else {
LO_data[0] = sense[7]; /* operation */
}
LO_data[1] = sense[8]; /* auxiliary */
LO_data[2] = sense[9];
LO_data[3] = sense[3]; /* count */
LO_data[4] = sense[29]; /* seek_addr.cyl */
LO_data[5] = sense[30]; /* seek_addr.cyl 2nd byte */
LO_data[7] = sense[31]; /* seek_addr.head 2nd byte */
memcpy(&(LO_data[8]), &(sense[11]), 8);
/* create DE ccw */
ccw = erp->cpaddr;
memset(ccw, 0, sizeof (struct ccw1));
ccw->cmd_code = DASD_ECKD_CCW_DEFINE_EXTENT;
ccw->flags = CCW_FLAG_CC;
ccw->count = 16;
ccw->cda = (__u32)(addr_t) DE_data;
/* create LO ccw */
ccw++;
memset(ccw, 0, sizeof (struct ccw1));
ccw->cmd_code = DASD_ECKD_CCW_LOCATE_RECORD;
ccw->flags = CCW_FLAG_CC;
ccw->count = 16;
ccw->cda = (__u32)(addr_t) LO_data;
/* TIC to the failed ccw */
ccw++;
ccw->cmd_code = CCW_CMD_TIC;
ccw->cda = cpa;
/* fill erp related fields */
erp->function = dasd_3990_erp_action_1B_32;
erp->refers = default_erp->refers;
erp->device = device;
erp->magic = default_erp->magic;
erp->expires = 0;
erp->retries = 256;
erp->buildclk = get_clock();
erp->status = DASD_CQR_FILLED;
/* remove the default erp */
dasd_free_erp_request(default_erp, device);
return erp;
} /* end dasd_3990_erp_action_1B_32 */
/*
* DASD_3990_UPDATE_1B
*
* DESCRIPTION
* Handles the update to the 32 byte 'Action 1B' of Single Program
* Action Codes in case the first action was not successful.
* The already created 'previous_erp' is the currently not successful
* ERP.
*
* PARAMETER
* previous_erp already created previous erp.
* sense current sense data
* RETURN VALUES
* erp modified erp
*/
static struct dasd_ccw_req *
dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense)
{
struct dasd_device *device = previous_erp->device;
__u32 cpa = 0;
struct dasd_ccw_req *cqr;
struct dasd_ccw_req *erp;
char *LO_data; /* struct LO_eckd_data */
struct ccw1 *ccw;
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Write not finished because of unexpected condition"
" - follow on");
/* determine the original cqr */
cqr = previous_erp;
while (cqr->refers != NULL) {
cqr = cqr->refers;
}
/* for imprecise ending just do default erp */
if (sense[1] & 0x01) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Imprecise ending is set - just retry");
previous_erp->status = DASD_CQR_QUEUED;
return previous_erp;
}
/* determine the address of the CCW to be restarted */
/* Imprecise ending is not set -> addr from IRB-SCSW */
cpa = previous_erp->irb.scsw.cpa;
if (cpa == 0) {
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Unable to determine address of the CCW "
"to be restarted");
previous_erp->status = DASD_CQR_FAILED;
return previous_erp;
}
erp = previous_erp;
/* update the LO with the new returned sense data */
LO_data = erp->data + sizeof (struct DE_eckd_data);
if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) {
DEV_MESSAGE(KERN_ERR, device, "%s",
"BUG - this should not happen");
previous_erp->status = DASD_CQR_FAILED;
return previous_erp;
}
if ((sense[7] & 0x3F) == 0x01) {
/* operation code is WRITE DATA -> data area orientation */
LO_data[0] = 0x81;
} else if ((sense[7] & 0x3F) == 0x03) {
/* operation code is FORMAT WRITE -> index orientation */
LO_data[0] = 0xC3;
} else {
LO_data[0] = sense[7]; /* operation */
}
LO_data[1] = sense[8]; /* auxiliary */
LO_data[2] = sense[9];
LO_data[3] = sense[3]; /* count */
LO_data[4] = sense[29]; /* seek_addr.cyl */
LO_data[5] = sense[30]; /* seek_addr.cyl 2nd byte */
LO_data[7] = sense[31]; /* seek_addr.head 2nd byte */
memcpy(&(LO_data[8]), &(sense[11]), 8);
/* TIC to the failed ccw */
ccw = erp->cpaddr; /* addr of DE ccw */
ccw++; /* addr of LE ccw */
ccw++; /* addr of TIC ccw */
ccw->cda = cpa;
erp->status = DASD_CQR_QUEUED;
return erp;
} /* end dasd_3990_update_1B */
/*
* DASD_3990_ERP_COMPOUND_RETRY
*
* DESCRIPTION
* Handles the compound ERP action retry code.
* NOTE: At least one retry is done even if zero is specified
* by the sense data. This makes enqueueing of the request
* easier.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created ERP
*
* RETURN VALUES
* erp modified ERP pointer
*
*/
static void
dasd_3990_erp_compound_retry(struct dasd_ccw_req * erp, char *sense)
{
switch (sense[25] & 0x03) {
case 0x00: /* no not retry */
erp->retries = 1;
break;
case 0x01: /* retry 2 times */
erp->retries = 2;
break;
case 0x02: /* retry 10 times */
erp->retries = 10;
break;
case 0x03: /* retry 256 times */
erp->retries = 256;
break;
default:
BUG();
}
erp->function = dasd_3990_erp_compound_retry;
} /* end dasd_3990_erp_compound_retry */
/*
* DASD_3990_ERP_COMPOUND_PATH
*
* DESCRIPTION
* Handles the compound ERP action for retry on alternate
* channel path.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created ERP
*
* RETURN VALUES
* erp modified ERP pointer
*
*/
static void
dasd_3990_erp_compound_path(struct dasd_ccw_req * erp, char *sense)
{
if (sense[25] & DASD_SENSE_BIT_3) {
dasd_3990_erp_alternate_path(erp);
if (erp->status == DASD_CQR_FAILED) {
/* reset the lpm and the status to be able to
* try further actions. */
erp->lpm = 0;
erp->status = DASD_CQR_ERROR;
}
}
erp->function = dasd_3990_erp_compound_path;
} /* end dasd_3990_erp_compound_path */
/*
* DASD_3990_ERP_COMPOUND_CODE
*
* DESCRIPTION
* Handles the compound ERP action for retry code.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created ERP
*
* RETURN VALUES
* erp NEW ERP pointer
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_compound_code(struct dasd_ccw_req * erp, char *sense)
{
if (sense[25] & DASD_SENSE_BIT_2) {
switch (sense[28]) {
case 0x17:
/* issue a Diagnostic Control command with an
* Inhibit Write subcommand and controler modifier */
erp = dasd_3990_erp_DCTL(erp, 0x20);
break;
case 0x25:
/* wait for 5 seconds and retry again */
erp->retries = 1;
dasd_3990_erp_block_queue (erp, 5*HZ);
break;
default:
/* should not happen - continue */
break;
}
}
erp->function = dasd_3990_erp_compound_code;
return erp;
} /* end dasd_3990_erp_compound_code */
/*
* DASD_3990_ERP_COMPOUND_CONFIG
*
* DESCRIPTION
* Handles the compound ERP action for configruation
* dependent error.
* Note: duplex handling is not implemented (yet).
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created ERP
*
* RETURN VALUES
* erp modified ERP pointer
*
*/
static void
dasd_3990_erp_compound_config(struct dasd_ccw_req * erp, char *sense)
{
if ((sense[25] & DASD_SENSE_BIT_1) && (sense[26] & DASD_SENSE_BIT_2)) {
/* set to suspended duplex state then restart */
struct dasd_device *device = erp->device;
DEV_MESSAGE(KERN_ERR, device, "%s",
"Set device to suspended duplex state should be "
"done!\n"
"This is not implemented yet (for compound ERP)"
" - please report to linux390@de.ibm.com");
}
erp->function = dasd_3990_erp_compound_config;
} /* end dasd_3990_erp_compound_config */
/*
* DASD_3990_ERP_COMPOUND
*
* DESCRIPTION
* Does the further compound program action if
* compound retry was not successful.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the current (failed) ERP
*
* RETURN VALUES
* erp (additional) ERP pointer
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_compound(struct dasd_ccw_req * erp, char *sense)
{
if ((erp->function == dasd_3990_erp_compound_retry) &&
(erp->status == DASD_CQR_ERROR)) {
dasd_3990_erp_compound_path(erp, sense);
}
if ((erp->function == dasd_3990_erp_compound_path) &&
(erp->status == DASD_CQR_ERROR)) {
erp = dasd_3990_erp_compound_code(erp, sense);
}
if ((erp->function == dasd_3990_erp_compound_code) &&
(erp->status == DASD_CQR_ERROR)) {
dasd_3990_erp_compound_config(erp, sense);
}
/* if no compound action ERP specified, the request failed */
if (erp->status == DASD_CQR_ERROR) {
erp->status = DASD_CQR_FAILED;
}
return erp;
} /* end dasd_3990_erp_compound */
/*
* DASD_3990_ERP_INSPECT_32
*
* DESCRIPTION
* Does a detailed inspection of the 32 byte sense data
* and sets up a related error recovery action.
*
* PARAMETER
* sense sense data of the actual error
* erp pointer to the currently created default ERP
*
* RETURN VALUES
* erp_filled pointer to the ERP
*
*/
static struct dasd_ccw_req *
dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
{
struct dasd_device *device = erp->device;
erp->function = dasd_3990_erp_inspect_32;
if (sense[25] & DASD_SENSE_BIT_0) {
/* compound program action codes (byte25 bit 0 == '1') */
dasd_3990_erp_compound_retry(erp, sense);
} else {
/* single program action codes (byte25 bit 0 == '0') */
switch (sense[25]) {
case 0x00: /* success - use default ERP for retries */
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"ERP called for successful request"
" - just retry");
break;
case 0x01: /* fatal error */
DEV_MESSAGE(KERN_ERR, device, "%s",
"Fatal error should have been "
"handled within the interrupt handler");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
break;
case 0x02: /* intervention required */
case 0x03: /* intervention required during dual copy */
erp = dasd_3990_erp_int_req(erp);
break;
case 0x0F: /* length mismatch during update write command */
DEV_MESSAGE(KERN_ERR, device, "%s",
"update write command error - should not "
"happen;\n"
"Please send this message together with "
"the above sense data to linux390@de."
"ibm.com");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
break;
case 0x10: /* logging required for other channel program */
erp = dasd_3990_erp_action_10_32(erp, sense);
break;
case 0x15: /* next track outside defined extend */
DEV_MESSAGE(KERN_ERR, device, "%s",
"next track outside defined extend - "
"should not happen;\n"
"Please send this message together with "
"the above sense data to linux390@de."
"ibm.com");
erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED);
break;
case 0x1B: /* unexpected condition during write */
erp = dasd_3990_erp_action_1B_32(erp, sense);
break;
case 0x1C: /* invalid data */
DEV_MESSAGE(KERN_EMERG, device, "%s",
"Data recovered during retry with PCI "
"fetch mode active");
/* not possible to handle this situation in Linux */
panic
("Invalid data - No way to inform application "
"about the possibly incorrect data");
break;
case 0x1D: /* state-change pending */
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"A State change pending condition exists "
"for the subsystem or device");
erp = dasd_3990_erp_action_4(erp, sense);
break;
case 0x1E: /* busy */
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"Busy condition exists "
"for the subsystem or device");
erp = dasd_3990_erp_action_4(erp, sense);
break;
default: /* all others errors - default erp */
break;
}
}
return erp;
} /* end dasd_3990_erp_inspect_32 */
/*
*****************************************************************************
* main ERP control fuctions (24 and 32 byte sense)
*****************************************************************************
*/
/*
* DASD_3990_ERP_INSPECT
*
* DESCRIPTION
* Does a detailed inspection for sense data by calling either
* the 24-byte or the 32-byte inspection routine.
*
* PARAMETER
* erp pointer to the currently created default ERP
* RETURN VALUES
* erp_new contens was possibly modified
*/
static struct dasd_ccw_req *
dasd_3990_erp_inspect(struct dasd_ccw_req * erp)
{
struct dasd_ccw_req *erp_new = NULL;
/* sense data are located in the refers record of the */
/* already set up new ERP ! */
char *sense = erp->refers->irb.ecw;
/* distinguish between 24 and 32 byte sense data */
if (sense[27] & DASD_SENSE_BIT_0) {
/* inspect the 24 byte sense data */
erp_new = dasd_3990_erp_inspect_24(erp, sense);
} else {
/* inspect the 32 byte sense data */
erp_new = dasd_3990_erp_inspect_32(erp, sense);
} /* end distinguish between 24 and 32 byte sense data */
return erp_new;
}
/*
* DASD_3990_ERP_ADD_ERP
*
* DESCRIPTION
* This funtion adds an additional request block (ERP) to the head of
* the given cqr (or erp).
* This erp is initialized as an default erp (retry TIC)
*
* PARAMETER
* cqr head of the current ERP-chain (or single cqr if
* first error)
* RETURN VALUES
* erp pointer to new ERP-chain head
*/
static struct dasd_ccw_req *
dasd_3990_erp_add_erp(struct dasd_ccw_req * cqr)
{
struct dasd_device *device = cqr->device;
struct ccw1 *ccw;
/* allocate additional request block */
struct dasd_ccw_req *erp;
erp = dasd_alloc_erp_request((char *) &cqr->magic, 2, 0, cqr->device);
if (IS_ERR(erp)) {
if (cqr->retries <= 0) {
DEV_MESSAGE(KERN_ERR, device, "%s",
"Unable to allocate ERP request");
cqr->status = DASD_CQR_FAILED;
cqr->stopclk = get_clock ();
} else {
DEV_MESSAGE (KERN_ERR, device,
"Unable to allocate ERP request "
"(%i retries left)",
cqr->retries);
dasd_set_timer(device, (HZ << 3));
}
return cqr;
}
/* initialize request with default TIC to current ERP/CQR */
ccw = erp->cpaddr;
ccw->cmd_code = CCW_CMD_NOOP;
ccw->flags = CCW_FLAG_CC;
ccw++;
ccw->cmd_code = CCW_CMD_TIC;
ccw->cda = (long)(cqr->cpaddr);
erp->function = dasd_3990_erp_add_erp;
erp->refers = cqr;
erp->device = cqr->device;
erp->magic = cqr->magic;
erp->expires = 0;
erp->retries = 256;
erp->buildclk = get_clock();
erp->status = DASD_CQR_FILLED;
return erp;
}
/*
* DASD_3990_ERP_ADDITIONAL_ERP
*
* DESCRIPTION
* An additional ERP is needed to handle the current error.
* Add ERP to the head of the ERP-chain containing the ERP processing
* determined based on the sense data.
*
* PARAMETER
* cqr head of the current ERP-chain (or single cqr if
* first error)
*
* RETURN VALUES
* erp pointer to new ERP-chain head
*/
static struct dasd_ccw_req *
dasd_3990_erp_additional_erp(struct dasd_ccw_req * cqr)
{
struct dasd_ccw_req *erp = NULL;
/* add erp and initialize with default TIC */
erp = dasd_3990_erp_add_erp(cqr);
/* inspect sense, determine specific ERP if possible */
if (erp != cqr) {
erp = dasd_3990_erp_inspect(erp);
}
return erp;
} /* end dasd_3990_erp_additional_erp */
/*
* DASD_3990_ERP_ERROR_MATCH
*
* DESCRIPTION
* Check if the device status of the given cqr is the same.
* This means that the failed CCW and the relevant sense data
* must match.
* I don't distinguish between 24 and 32 byte sense because in case of
* 24 byte sense byte 25 and 27 is set as well.
*
* PARAMETER
* cqr1 first cqr, which will be compared with the
* cqr2 second cqr.
*
* RETURN VALUES
* match 'boolean' for match found
* returns 1 if match found, otherwise 0.
*/
static int
dasd_3990_erp_error_match(struct dasd_ccw_req *cqr1, struct dasd_ccw_req *cqr2)
{
/* check failed CCW */
if (cqr1->irb.scsw.cpa != cqr2->irb.scsw.cpa) {
// return 0; /* CCW doesn't match */
}
/* check sense data; byte 0-2,25,27 */
if (!((memcmp (cqr1->irb.ecw, cqr2->irb.ecw, 3) == 0) &&
(cqr1->irb.ecw[27] == cqr2->irb.ecw[27]) &&
(cqr1->irb.ecw[25] == cqr2->irb.ecw[25]))) {
return 0; /* sense doesn't match */
}
return 1; /* match */
} /* end dasd_3990_erp_error_match */
/*
* DASD_3990_ERP_IN_ERP
*
* DESCRIPTION
* check if the current error already happened before.
* quick exit if current cqr is not an ERP (cqr->refers=NULL)
*
* PARAMETER
* cqr failed cqr (either original cqr or already an erp)
*
* RETURN VALUES
* erp erp-pointer to the already defined error
* recovery procedure OR
* NULL if a 'new' error occurred.
*/
static struct dasd_ccw_req *
dasd_3990_erp_in_erp(struct dasd_ccw_req *cqr)
{
struct dasd_ccw_req *erp_head = cqr, /* save erp chain head */
*erp_match = NULL; /* save erp chain head */
int match = 0; /* 'boolean' for matching error found */
if (cqr->refers == NULL) { /* return if not in erp */
return NULL;
}
/* check the erp/cqr chain for current error */
do {
match = dasd_3990_erp_error_match(erp_head, cqr->refers);
erp_match = cqr; /* save possible matching erp */
cqr = cqr->refers; /* check next erp/cqr in queue */
} while ((cqr->refers != NULL) && (!match));
if (!match) {
return NULL; /* no match was found */
}
return erp_match; /* return address of matching erp */
} /* END dasd_3990_erp_in_erp */
/*
* DASD_3990_ERP_FURTHER_ERP (24 & 32 byte sense)
*
* DESCRIPTION
* No retry is left for the current ERP. Check what has to be done
* with the ERP.
* - do further defined ERP action or
* - wait for interrupt or
* - exit with permanent error
*
* PARAMETER
* erp ERP which is in progress with no retry left
*
* RETURN VALUES
* erp modified/additional ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_further_erp(struct dasd_ccw_req *erp)
{
struct dasd_device *device = erp->device;
char *sense = erp->irb.ecw;
/* check for 24 byte sense ERP */
if ((erp->function == dasd_3990_erp_bus_out) ||
(erp->function == dasd_3990_erp_action_1) ||
(erp->function == dasd_3990_erp_action_4)) {
erp = dasd_3990_erp_action_1(erp);
} else if (erp->function == dasd_3990_erp_action_5) {
/* retries have not been successful */
/* prepare erp for retry on different channel path */
erp = dasd_3990_erp_action_1(erp);
if (!(sense[2] & DASD_SENSE_BIT_0)) {
/* issue a Diagnostic Control command with an
* Inhibit Write subcommand */
switch (sense[25]) {
case 0x17:
case 0x57:{ /* controller */
erp = dasd_3990_erp_DCTL(erp, 0x20);
break;
}
case 0x18:
case 0x58:{ /* channel path */
erp = dasd_3990_erp_DCTL(erp, 0x40);
break;
}
case 0x19:
case 0x59:{ /* storage director */
erp = dasd_3990_erp_DCTL(erp, 0x80);
break;
}
default:
DEV_MESSAGE(KERN_DEBUG, device,
"invalid subcommand modifier 0x%x "
"for Diagnostic Control Command",
sense[25]);
}
}
/* check for 32 byte sense ERP */
} else if ((erp->function == dasd_3990_erp_compound_retry) ||
(erp->function == dasd_3990_erp_compound_path) ||
(erp->function == dasd_3990_erp_compound_code) ||
(erp->function == dasd_3990_erp_compound_config)) {
erp = dasd_3990_erp_compound(erp, sense);
} else {
/* No retry left and no additional special handling */
/*necessary */
DEV_MESSAGE(KERN_ERR, device,
"no retries left for erp %p - "
"set status to FAILED", erp);
erp->status = DASD_CQR_FAILED;
}
return erp;
} /* end dasd_3990_erp_further_erp */
/*
* DASD_3990_ERP_HANDLE_MATCH_ERP
*
* DESCRIPTION
* An error occurred again and an ERP has been detected which is already
* used to handle this error (e.g. retries).
* All prior ERP's are asumed to be successful and therefore removed
* from queue.
* If retry counter of matching erp is already 0, it is checked if further
* action is needed (besides retry) or if the ERP has failed.
*
* PARAMETER
* erp_head first ERP in ERP-chain
* erp ERP that handles the actual error.
* (matching erp)
*
* RETURN VALUES
* erp modified/additional ERP
*/
static struct dasd_ccw_req *
dasd_3990_erp_handle_match_erp(struct dasd_ccw_req *erp_head,
struct dasd_ccw_req *erp)
{
struct dasd_device *device = erp_head->device;
struct dasd_ccw_req *erp_done = erp_head; /* finished req */
struct dasd_ccw_req *erp_free = NULL; /* req to be freed */
/* loop over successful ERPs and remove them from chanq */
while (erp_done != erp) {
if (erp_done == NULL) /* end of chain reached */
panic(PRINTK_HEADER "Programming error in ERP! The "
"original request was lost\n");
/* remove the request from the device queue */
list_del(&erp_done->list);
erp_free = erp_done;
erp_done = erp_done->refers;
/* free the finished erp request */
dasd_free_erp_request(erp_free, erp_free->device);
} /* end while */
if (erp->retries > 0) {
char *sense = erp->refers->irb.ecw;
/* check for special retries */
if (erp->function == dasd_3990_erp_action_4) {
erp = dasd_3990_erp_action_4(erp, sense);
} else if (erp->function == dasd_3990_erp_action_1B_32) {
erp = dasd_3990_update_1B(erp, sense);
} else if (erp->function == dasd_3990_erp_int_req) {
erp = dasd_3990_erp_int_req(erp);
} else {
/* simple retry */
DEV_MESSAGE(KERN_DEBUG, device,
"%i retries left for erp %p",
erp->retries, erp);
/* handle the request again... */
erp->status = DASD_CQR_QUEUED;
}
} else {
/* no retry left - check for further necessary action */
/* if no further actions, handle rest as permanent error */
erp = dasd_3990_erp_further_erp(erp);
}
return erp;
} /* end dasd_3990_erp_handle_match_erp */
/*
* DASD_3990_ERP_ACTION
*
* DESCRIPTION
* controll routine for 3990 erp actions.
* Has to be called with the queue lock (namely the s390_irq_lock) acquired.
*
* PARAMETER
* cqr failed cqr (either original cqr or already an erp)
*
* RETURN VALUES
* erp erp-pointer to the head of the ERP action chain.
* This means:
* - either a ptr to an additional ERP cqr or
* - the original given cqr (which's status might
* be modified)
*/
struct dasd_ccw_req *
dasd_3990_erp_action(struct dasd_ccw_req * cqr)
{
struct dasd_ccw_req *erp = NULL;
struct dasd_device *device = cqr->device;
struct dasd_ccw_req *temp_erp = NULL;
if (device->features & DASD_FEATURE_ERPLOG) {
/* print current erp_chain */
DEV_MESSAGE(KERN_ERR, device, "%s",
"ERP chain at BEGINNING of ERP-ACTION");
for (temp_erp = cqr;
temp_erp != NULL; temp_erp = temp_erp->refers) {
DEV_MESSAGE(KERN_ERR, device,
" erp %p (%02x) refers to %p",
temp_erp, temp_erp->status,
temp_erp->refers);
}
}
/* double-check if current erp/cqr was successfull */
if ((cqr->irb.scsw.cstat == 0x00) &&
(cqr->irb.scsw.dstat == (DEV_STAT_CHN_END|DEV_STAT_DEV_END))) {
DEV_MESSAGE(KERN_DEBUG, device,
"ERP called for successful request %p"
" - NO ERP necessary", cqr);
cqr->status = DASD_CQR_DONE;
return cqr;
}
/* check if sense data are available */
if (!cqr->irb.ecw) {
DEV_MESSAGE(KERN_DEBUG, device,
"ERP called witout sense data avail ..."
"request %p - NO ERP possible", cqr);
cqr->status = DASD_CQR_FAILED;
return cqr;
}
/* check if error happened before */
erp = dasd_3990_erp_in_erp(cqr);
if (erp == NULL) {
/* no matching erp found - set up erp */
erp = dasd_3990_erp_additional_erp(cqr);
} else {
/* matching erp found - set all leading erp's to DONE */
erp = dasd_3990_erp_handle_match_erp(cqr, erp);
}
if (device->features & DASD_FEATURE_ERPLOG) {
/* print current erp_chain */
DEV_MESSAGE(KERN_ERR, device, "%s",
"ERP chain at END of ERP-ACTION");
for (temp_erp = erp;
temp_erp != NULL; temp_erp = temp_erp->refers) {
DEV_MESSAGE(KERN_ERR, device,
" erp %p (%02x) refers to %p",
temp_erp, temp_erp->status,
temp_erp->refers);
}
}
/* enqueue added ERP request */
if (erp->status == DASD_CQR_FILLED) {
erp->status = DASD_CQR_QUEUED;
list_add(&erp->list, &device->ccw_queue);
}
return erp;
} /* end dasd_3990_erp_action */