linux/drivers/pinctrl/stm32
Linus Torvalds bc3b3f4bfb This is the bulk of pin control changes for the v5.7 kernel cycle.
There are no core changes this time, only driver developments.
 
 - New driver for the Dialog Semiconductor DA9062 Power Management
   Integrated Circuit (PMIC).
 
 - Renesas SH-PFC has improved consistency, with group and
   register checks in the configuration checker.
 
 - New subdriver for the Qualcomm IPQ6018.
 
 - Add the RGMII pin control functionality to Qualcomm IPQ8064.
 
 - Performance and code quality cleanups in the Mediatek
   driver.
 
 - Improve the Broadcom BCM2835 support to cover all the GPIOs
   that exist in it.
 
 - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on
   suspend.
 
 - Add some missing groups and functions to the Ingenic driver.
 
 - Convert some of the Freescale device tree bindings to use the
   new and all improved JSON YAML markup.
 
 - Refactorings and support for the SFIO/GPIO in the Tegra194
   SoC driver.
 
 - Support high impedance mode in the Spreadtrum/Unisoc driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl6FlRoACgkQQRCzN7AZ
 XXPiAxAAuAvY07H739YF4ANvtLpfbtz0KBK4M2XGiD41VMcp5MhZtT9TdXAIRisb
 W4QMHbMxhwO4gdxmhVOetXeQNQnHch4oPsFyd1UdyuwNEtvlm8qst99VcdQPz7Jv
 zyL4cat1fTrwdcnLQl5eaJR7a9bKLqAd4rlb/suQZsaVf+URUWJyZBuU41GEx9A+
 w+EPv8doxTWRaE0NpafIwNCLxTR3i2Vt59fkRT4pSi8fTu9/Zv5yW8yWvbYZdlaO
 2bUaFjN65oyiikjPTgyQxb95A8yDJHkNnkgfTw4ghCY/k8u3GvMfKS7V1tO+nq6B
 bkv9E3jR1u7Ktkq1rLshS2eycl02uSJ3OmzyfL8S/GQxVdUPi3+X3hmyv2ctbEvC
 qy+7F6zx/Pt/WdPnAisdsVai9T3/YGoSN1C3n7Ufltjcrt0w5xP7/AgEVR4nHHMP
 NMWNoauGWsBDKtYPG7beX3thjkm3mUpezcEOxho7+r5tOtBaU623pWr+NHEPZu48
 8oKOCILaUkacUmmMjjOzraAeOxV7Ut+xumu0mgMj0EjZfJZDrgQsqkmfMbGcU5Fa
 y4S5+tAd+cELXveLVJB3Ml9u1R037x8VtAv+Z2a7qVnf1gSgf0bpAJ+SnfC/XbLX
 fBpSCsIMXSpioVNuS9gbkpnfsRPcTOrOXyxinP5onI8AHlIj1Rg=
 =1ZKq
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.7 kernel cycle.

  There are no core changes this time, only driver developments:

   - New driver for the Dialog Semiconductor DA9062 Power Management
     Integrated Circuit (PMIC).

   - Renesas SH-PFC has improved consistency, with group and register
     checks in the configuration checker.

   - New subdriver for the Qualcomm IPQ6018.

   - Add the RGMII pin control functionality to Qualcomm IPQ8064.

   - Performance and code quality cleanups in the Mediatek driver.

   - Improve the Broadcom BCM2835 support to cover all the GPIOs that
     exist in it.

   - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on
     suspend.

   - Add some missing groups and functions to the Ingenic driver.

   - Convert some of the Freescale device tree bindings to use the new
     and all improved JSON YAML markup.

   - Refactorings and support for the SFIO/GPIO in the Tegra194 SoC
     driver.

   - Support high impedance mode in the Spreadtrum/Unisoc driver"

* tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (64 commits)
  pinctrl: qcom: fix compilation error
  pinctrl: qcom: use scm_call to route GPIO irq to Apps
  pinctrl: sprd: Add pin high impedance mode support
  pinctrl: sprd: Use the correct pin output configuration
  pinctrl: tegra: Add SFIO/GPIO programming on Tegra194
  pinctrl: tegra: Renumber the GG.0 and GG.1 pins
  pinctrl: tegra: Do not add default pin range on Tegra194
  pinctrl: tegra: Pass struct tegra_pmx for pin range check
  pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typo
  pinctrl: tegra: Fix whitespace issues for improved readability
  pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflow
  pinctrl: freescale: drop the dependency on ARM64 for i.MX8M
  Revert "pinctrl: mvebu: armada-37xx: use use platform api"
  dt-bindings: pinctrl: at91: Fix a typo ("descibe")
  pinctrl: meson: add tsin pinctrl for meson gxbb/gxl/gxm
  pinctrl: sprd: Fix the kconfig warning
  pinctrl: ingenic: add hdmi-ddc pin control group
  pinctrl: sirf/atlas7: Replace zero-length array with flexible-array member
  pinctrl: sprd: Allow the SPRD pinctrl driver building into a module
  pinctrl: Export some needed symbols at module load time
  ...
2020-04-02 15:47:18 -07:00
..
Kconfig treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
Makefile pinctrl: stm32: add STM32F769 MCU support 2018-01-22 09:28:08 +01:00
pinctrl-stm32.c This is the bulk of pin control changes for the v5.7 kernel cycle. 2020-04-02 15:47:18 -07:00
pinctrl-stm32.h pinctrl: stm32: Use the correct style for SPDX License Identifier 2019-12-12 11:33:51 +01:00
pinctrl-stm32f429.c pinctrl: stm32: Fix copyright 2017-12-02 16:23:08 +01:00
pinctrl-stm32f469.c pinctrl: stm32: Fix copyright 2017-12-02 16:23:08 +01:00
pinctrl-stm32f746.c pinctrl: stm32: Fix copyright 2017-12-02 16:23:08 +01:00
pinctrl-stm32f769.c pinctrl: stm32: add STM32F769 MCU support 2018-01-22 09:28:08 +01:00
pinctrl-stm32h743.c pinctrl: stm32: Fix copyright 2017-12-02 16:23:08 +01:00
pinctrl-stm32mp157.c pinctrl: stm32: Enable suspend/resume for stm32mp157c SoC 2019-05-24 13:21:45 +02:00