openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/sound/soc/codecs/sgtl5000.c

1528 lines
38 KiB
C
Raw Blame History

/*
* sgtl5000.c -- SGTL5000 ALSA SoC Audio driver
*
* Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
#include <sound/core.h>
#include <sound/tlv.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include "sgtl5000.h"
#define SGTL5000_DAP_REG_OFFSET 0x0100
#define SGTL5000_MAX_REG_OFFSET 0x013A
/* default value of sgtl5000 registers except DAP */
static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET >> 1] = {
0xa011, /* 0x0000, CHIP_ID. 11 stand for revison 17 */
0x0000, /* 0x0002, CHIP_DIG_POWER. */
0x0008, /* 0x0004, CHIP_CKL_CTRL */
0x0010, /* 0x0006, CHIP_I2S_CTRL */
0x0000, /* 0x0008, reserved */
0x0008, /* 0x000A, CHIP_SSS_CTRL */
0x0000, /* 0x000C, reserved */
0x020c, /* 0x000E, CHIP_ADCDAC_CTRL */
0x3c3c, /* 0x0010, CHIP_DAC_VOL */
0x0000, /* 0x0012, reserved */
0x015f, /* 0x0014, CHIP_PAD_STRENGTH */
0x0000, /* 0x0016, reserved */
0x0000, /* 0x0018, reserved */
0x0000, /* 0x001A, reserved */
0x0000, /* 0x001E, reserved */
0x0000, /* 0x0020, CHIP_ANA_ADC_CTRL */
0x1818, /* 0x0022, CHIP_ANA_HP_CTRL */
0x0111, /* 0x0024, CHIP_ANN_CTRL */
0x0000, /* 0x0026, CHIP_LINREG_CTRL */
0x0000, /* 0x0028, CHIP_REF_CTRL */
0x0000, /* 0x002A, CHIP_MIC_CTRL */
0x0000, /* 0x002C, CHIP_LINE_OUT_CTRL */
0x0404, /* 0x002E, CHIP_LINE_OUT_VOL */
0x7060, /* 0x0030, CHIP_ANA_POWER */
0x5000, /* 0x0032, CHIP_PLL_CTRL */
0x0000, /* 0x0034, CHIP_CLK_TOP_CTRL */
0x0000, /* 0x0036, CHIP_ANA_STATUS */
0x0000, /* 0x0038, reserved */
0x0000, /* 0x003A, CHIP_ANA_TEST2 */
0x0000, /* 0x003C, CHIP_SHORT_CTRL */
0x0000, /* reserved */
};
/* default value of dap registers */
static const u16 sgtl5000_dap_regs[] = {
0x0000, /* 0x0100, DAP_CONTROL */
0x0000, /* 0x0102, DAP_PEQ */
0x0040, /* 0x0104, DAP_BASS_ENHANCE */
0x051f, /* 0x0106, DAP_BASS_ENHANCE_CTRL */
0x0000, /* 0x0108, DAP_AUDIO_EQ */
0x0040, /* 0x010A, DAP_SGTL_SURROUND */
0x0000, /* 0x010C, DAP_FILTER_COEF_ACCESS */
0x0000, /* 0x010E, DAP_COEF_WR_B0_MSB */
0x0000, /* 0x0110, DAP_COEF_WR_B0_LSB */
0x0000, /* 0x0112, reserved */
0x0000, /* 0x0114, reserved */
0x002f, /* 0x0116, DAP_AUDIO_EQ_BASS_BAND0 */
0x002f, /* 0x0118, DAP_AUDIO_EQ_BAND0 */
0x002f, /* 0x011A, DAP_AUDIO_EQ_BAND2 */
0x002f, /* 0x011C, DAP_AUDIO_EQ_BAND3 */
0x002f, /* 0x011E, DAP_AUDIO_EQ_TREBLE_BAND4 */
0x8000, /* 0x0120, DAP_MAIN_CHAN */
0x0000, /* 0x0122, DAP_MIX_CHAN */
0x0510, /* 0x0124, DAP_AVC_CTRL */
0x1473, /* 0x0126, DAP_AVC_THRESHOLD */
0x0028, /* 0x0128, DAP_AVC_ATTACK */
0x0050, /* 0x012A, DAP_AVC_DECAY */
0x0000, /* 0x012C, DAP_COEF_WR_B1_MSB */
0x0000, /* 0x012E, DAP_COEF_WR_B1_LSB */
0x0000, /* 0x0130, DAP_COEF_WR_B2_MSB */
0x0000, /* 0x0132, DAP_COEF_WR_B2_LSB */
0x0000, /* 0x0134, DAP_COEF_WR_A1_MSB */
0x0000, /* 0x0136, DAP_COEF_WR_A1_LSB */
0x0000, /* 0x0138, DAP_COEF_WR_A2_MSB */
0x0000, /* 0x013A, DAP_COEF_WR_A2_LSB */
};
/* regulator supplies for sgtl5000, VDDD is an optional external supply */
enum sgtl5000_regulator_supplies {
VDDA,
VDDIO,
VDDD,
SGTL5000_SUPPLY_NUM
};
/* vddd is optional supply */
static const char *supply_names[SGTL5000_SUPPLY_NUM] = {
"VDDA",
"VDDIO",
"VDDD"
};
#define LDO_CONSUMER_NAME "VDDD_LDO"
#define LDO_VOLTAGE 1200000
static struct regulator_consumer_supply ldo_consumer[] = {
REGULATOR_SUPPLY(LDO_CONSUMER_NAME, NULL),
};
static struct regulator_init_data ldo_init_data = {
.constraints = {
.min_uV = 850000,
.max_uV = 1600000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &ldo_consumer[0],
};
/*
* sgtl5000 internal ldo regulator,
* enabled when VDDD not provided
*/
struct ldo_regulator {
struct regulator_desc desc;
struct regulator_dev *dev;
int voltage;
void *codec_data;
bool enabled;
};
/* sgtl5000 private structure in codec */
struct sgtl5000_priv {
int sysclk; /* sysclk rate */
int master; /* i2s master or not */
int fmt; /* i2s data format */
struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
struct ldo_regulator *ldo;
};
/*
* mic_bias power on/off share the same register bits with
* output impedance of mic bias, when power on mic bias, we
* need reclaim it to impedance value.
* 0x0 = Powered off
* 0x1 = 2Kohm
* 0x2 = 4Kohm
* 0x3 = 8Kohm
*/
static int mic_bias_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
switch (event) {
case SND_SOC_DAPM_POST_PMU:
/* change mic bias resistor to 4Kohm */
snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_R_4k, SGTL5000_BIAS_R_4k);
break;
case SND_SOC_DAPM_PRE_PMD:
/*
* SGTL5000_BIAS_R_8k as mask to clean the two bits
* of mic bias and output impedance
*/
snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_R_8k, 0);
break;
}
return 0;
}
/*
* using codec assist to small pop, hp_powerup or lineout_powerup
* should stay setting until vag_powerup is fully ramped down,
* vag fully ramped down require 400ms.
*/
static int small_pop_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
break;
case SND_SOC_DAPM_PRE_PMD:
snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_VAG_POWERUP, 0);
msleep(400);
break;
default:
break;
}
return 0;
}
/* input sources for ADC */
static const char *adc_mux_text[] = {
"MIC_IN", "LINE_IN"
};
static const struct soc_enum adc_enum =
SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 2, 2, adc_mux_text);
static const struct snd_kcontrol_new adc_mux =
SOC_DAPM_ENUM("Capture Mux", adc_enum);
/* input sources for DAC */
static const char *dac_mux_text[] = {
"DAC", "LINE_IN"
};
static const struct soc_enum dac_enum =
SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 6, 2, dac_mux_text);
static const struct snd_kcontrol_new dac_mux =
SOC_DAPM_ENUM("Headphone Mux", dac_enum);
static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("LINE_IN"),
SND_SOC_DAPM_INPUT("MIC_IN"),
SND_SOC_DAPM_OUTPUT("HP_OUT"),
SND_SOC_DAPM_OUTPUT("LINE_OUT"),
SND_SOC_DAPM_MICBIAS_E("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
mic_bias_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
small_pop_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_E("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0,
small_pop_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
/* aif for i2s input */
SND_SOC_DAPM_AIF_IN("AIFIN", "Playback",
0, SGTL5000_CHIP_DIG_POWER,
0, 0),
/* aif for i2s output */
SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture",
0, SGTL5000_CHIP_DIG_POWER,
1, 0),
SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
};
/* routes for sgtl5000 */
static const struct snd_soc_dapm_route audio_map[] = {
{"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
{"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
{"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */
{"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
{"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */
{"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
{"LO", NULL, "DAC"}, /* dac --> line_out */
{"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
{"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */
{"LINE_OUT", NULL, "LO"},
{"HP_OUT", NULL, "HP"},
};
/* custom function to fetch info of PCM playback volume */
static int dac_info_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 2;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 0xfc - 0x3c;
return 0;
}
/*
* custom function to get of PCM playback volume
*
* dac volume register
* 15-------------8-7--------------0
* | R channel vol | L channel vol |
* -------------------------------
*
* PCM volume with 0.5017 dB steps from 0 to -90 dB
*
* register values map to dB
* 0x3B and less = Reserved
* 0x3C = 0 dB
* 0x3D = -0.5 dB
* 0xF0 = -90 dB
* 0xFC and greater = Muted
*
* register value map to userspace value
*
* register value 0x3c(0dB) 0xf0(-90dB)0xfc
* ------------------------------
* userspace value 0xc0 0
*/
static int dac_get_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
int reg;
int l;
int r;
reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL);
/* get left channel volume */
l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
/* get right channel volume */
r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT;
/* make sure value fall in (0x3c,0xfc) */
l = clamp(l, 0x3c, 0xfc);
r = clamp(r, 0x3c, 0xfc);
/* invert it and map to userspace value */
l = 0xfc - l;
r = 0xfc - r;
ucontrol->value.integer.value[0] = l;
ucontrol->value.integer.value[1] = r;
return 0;
}
/*
* custom function to put of PCM playback volume
*
* dac volume register
* 15-------------8-7--------------0
* | R channel vol | L channel vol |
* -------------------------------
*
* PCM volume with 0.5017 dB steps from 0 to -90 dB
*
* register values map to dB
* 0x3B and less = Reserved
* 0x3C = 0 dB
* 0x3D = -0.5 dB
* 0xF0 = -90 dB
* 0xFC and greater = Muted
*
* userspace value map to register value
*
* userspace value 0xc0 0
* ------------------------------
* register value 0x3c(0dB) 0xf0(-90dB)0xfc
*/
static int dac_put_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
int reg;
int l;
int r;
l = ucontrol->value.integer.value[0];
r = ucontrol->value.integer.value[1];
/* make sure userspace volume fall in (0, 0xfc-0x3c) */
l = clamp(l, 0, 0xfc - 0x3c);
r = clamp(r, 0, 0xfc - 0x3c);
/* invert it, get the value can be set to register */
l = 0xfc - l;
r = 0xfc - r;
/* shift to get the register value */
reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg);
return 0;
}
static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0);
/* tlv for mic gain, 0db 20db 30db 40db */
static const unsigned int mic_gain_tlv[] = {
TLV_DB_RANGE_HEAD(4),
0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0),
};
/* tlv for hp volume, -51.5db to 12.0db, step .5db */
static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0);
static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
/* SOC_DOUBLE_S8_TLV with invert */
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "PCM Playback Volume",
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
SNDRV_CTL_ELEM_ACCESS_READWRITE,
.info = dac_info_volsw,
.get = dac_get_volsw,
.put = dac_put_volsw,
},
SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0),
SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)",
SGTL5000_CHIP_ANA_ADC_CTRL,
8, 2, 0, capture_6db_attenuate),
SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
SOC_DOUBLE_TLV("Headphone Playback Volume",
SGTL5000_CHIP_ANA_HP_CTRL,
0, 8,
0x7f, 1,
headphone_volume),
SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL,
5, 1, 0),
SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
0, 4, 0, mic_gain_tlv),
};
/* mute the codec used by alsa core */
static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{
struct snd_soc_codec *codec = codec_dai->codec;
u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT;
snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
adcdac_ctrl, mute ? adcdac_ctrl : 0);
return 0;
}
/* set codec format */
static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
u16 i2sctl = 0;
sgtl5000->master = 0;
/*
* i2s clock and frame master setting.
* ONLY support:
* - clock and frame slave,
* - clock and frame master
*/
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
break;
case SND_SOC_DAIFMT_CBM_CFM:
i2sctl |= SGTL5000_I2S_MASTER;
sgtl5000->master = 1;
break;
default:
return -EINVAL;
}
/* setting i2s data format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_DSP_A:
i2sctl |= SGTL5000_I2S_MODE_PCM;
break;
case SND_SOC_DAIFMT_DSP_B:
i2sctl |= SGTL5000_I2S_MODE_PCM;
i2sctl |= SGTL5000_I2S_LRALIGN;
break;
case SND_SOC_DAIFMT_I2S:
i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
break;
case SND_SOC_DAIFMT_RIGHT_J:
i2sctl |= SGTL5000_I2S_MODE_RJ;
i2sctl |= SGTL5000_I2S_LRPOL;
break;
case SND_SOC_DAIFMT_LEFT_J:
i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
i2sctl |= SGTL5000_I2S_LRALIGN;
break;
default:
return -EINVAL;
}
sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
/* Clock inversion */
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_NF:
i2sctl |= SGTL5000_I2S_SCLK_INV;
break;
default:
return -EINVAL;
}
snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl);
return 0;
}
/* set codec sysclk */
static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
switch (clk_id) {
case SGTL5000_SYSCLK:
sgtl5000->sysclk = freq;
break;
default:
return -EINVAL;
}
return 0;
}
/*
* set clock according to i2s frame clock,
* sgtl5000 provide 2 clock sources.
* 1. sys_mclk. sample freq can only configure to
* 1/256, 1/384, 1/512 of sys_mclk.
* 2. pll. can derive any audio clocks.
*
* clock setting rules:
* 1. in slave mode, only sys_mclk can use.
* 2. as constraint by sys_mclk, sample freq should
* set to 32k, 44.1k and above.
* 3. using sys_mclk prefer to pll to save power.
*/
static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
{
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
int clk_ctl = 0;
int sys_fs; /* sample freq */
/*
* sample freq should be divided by frame clock,
* if frame clock lower than 44.1khz, sample feq should set to
* 32khz or 44.1khz.
*/
switch (frame_rate) {
case 8000:
case 16000:
sys_fs = 32000;
break;
case 11025:
case 22050:
sys_fs = 44100;
break;
default:
sys_fs = frame_rate;
break;
}
/* set divided factor of frame clock */
switch (sys_fs / frame_rate) {
case 4:
clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT;
break;
case 2:
clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT;
break;
case 1:
clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT;
break;
default:
return -EINVAL;
}
/* set the sys_fs according to frame rate */
switch (sys_fs) {
case 32000:
clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT;
break;
case 44100:
clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT;
break;
case 48000:
clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT;
break;
case 96000:
clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
break;
default:
dev_err(codec->dev, "frame rate %d not supported\n",
frame_rate);
return -EINVAL;
}
/*
* calculate the divider of mclk/sample_freq,
* factor of freq =96k can only be 256, since mclk in range (12m,27m)
*/
switch (sgtl5000->sysclk / sys_fs) {
case 256:
clk_ctl |= SGTL5000_MCLK_FREQ_256FS <<
SGTL5000_MCLK_FREQ_SHIFT;
break;
case 384:
clk_ctl |= SGTL5000_MCLK_FREQ_384FS <<
SGTL5000_MCLK_FREQ_SHIFT;
break;
case 512:
clk_ctl |= SGTL5000_MCLK_FREQ_512FS <<
SGTL5000_MCLK_FREQ_SHIFT;
break;
default:
/* if mclk not satisify the divider, use pll */
if (sgtl5000->master) {
clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
SGTL5000_MCLK_FREQ_SHIFT;
} else {
dev_err(codec->dev,
"PLL not supported in slave mode\n");
return -EINVAL;
}
}
/* if using pll, please check manual 6.4.2 for detail */
if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) {
u64 out, t;
int div2;
int pll_ctl;
unsigned int in, int_div, frac_div;
if (sgtl5000->sysclk > 17000000) {
div2 = 1;
in = sgtl5000->sysclk / 2;
} else {
div2 = 0;
in = sgtl5000->sysclk;
}
if (sys_fs == 44100)
out = 180633600;
else
out = 196608000;
t = do_div(out, in);
int_div = out;
t *= 2048;
do_div(t, in);
frac_div = t;
pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
if (div2)
snd_soc_update_bits(codec,
SGTL5000_CHIP_CLK_TOP_CTRL,
SGTL5000_INPUT_FREQ_DIV2,
SGTL5000_INPUT_FREQ_DIV2);
else
snd_soc_update_bits(codec,
SGTL5000_CHIP_CLK_TOP_CTRL,
SGTL5000_INPUT_FREQ_DIV2,
0);
/* power up pll */
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
} else {
/* power down pll */
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
0);
}
/* if using pll, clk_ctrl must be set after pll power up */
snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
return 0;
}
/*
* Set PCM DAI bit size and sample rate.
* input: params_rate, params_fmt
*/
static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
int channels = params_channels(params);
int i2s_ctl = 0;
int stereo;
int ret;
/* sysclk should already set */
if (!sgtl5000->sysclk) {
dev_err(codec->dev, "%s: set sysclk first!\n", __func__);
return -EFAULT;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
stereo = SGTL5000_DAC_STEREO;
else
stereo = SGTL5000_ADC_STEREO;
/* set mono to save power */
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo,
channels == 1 ? 0 : stereo);
/* set codec clock base on lrclk */
ret = sgtl5000_set_clock(codec, params_rate(params));
if (ret)
return ret;
/* set i2s data format */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
return -EINVAL;
i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT;
i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS <<
SGTL5000_I2S_SCLKFREQ_SHIFT;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT;
i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
SGTL5000_I2S_SCLKFREQ_SHIFT;
break;
case SNDRV_PCM_FORMAT_S24_LE:
i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT;
i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
SGTL5000_I2S_SCLKFREQ_SHIFT;
break;
case SNDRV_PCM_FORMAT_S32_LE:
if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
return -EINVAL;
i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT;
i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
SGTL5000_I2S_SCLKFREQ_SHIFT;
break;
default:
return -EINVAL;
}
snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL, i2s_ctl, i2s_ctl);
return 0;
}
#ifdef CONFIG_REGULATOR
static int ldo_regulator_is_enabled(struct regulator_dev *dev)
{
struct ldo_regulator *ldo = rdev_get_drvdata(dev);
return ldo->enabled;
}
static int ldo_regulator_enable(struct regulator_dev *dev)
{
struct ldo_regulator *ldo = rdev_get_drvdata(dev);
struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
int reg;
if (ldo_regulator_is_enabled(dev))
return 0;
/* set regulator value firstly */
reg = (1600 - ldo->voltage / 1000) / 50;
reg = clamp(reg, 0x0, 0xf);
/* amend the voltage value, unit: uV */
ldo->voltage = (1600 - reg * 50) * 1000;
/* set voltage to register */
snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
(0x1 << 4) - 1, reg);
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_LINEREG_D_POWERUP,
SGTL5000_LINEREG_D_POWERUP);
/* when internal ldo enabled, simple digital power can be disabled */
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_LINREG_SIMPLE_POWERUP,
0);
ldo->enabled = 1;
return 0;
}
static int ldo_regulator_disable(struct regulator_dev *dev)
{
struct ldo_regulator *ldo = rdev_get_drvdata(dev);
struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_LINEREG_D_POWERUP,
0);
/* clear voltage info */
snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
(0x1 << 4) - 1, 0);
ldo->enabled = 0;
return 0;
}
static int ldo_regulator_get_voltage(struct regulator_dev *dev)
{
struct ldo_regulator *ldo = rdev_get_drvdata(dev);
return ldo->voltage;
}
static struct regulator_ops ldo_regulator_ops = {
.is_enabled = ldo_regulator_is_enabled,
.enable = ldo_regulator_enable,
.disable = ldo_regulator_disable,
.get_voltage = ldo_regulator_get_voltage,
};
static int ldo_regulator_register(struct snd_soc_codec *codec,
struct regulator_init_data *init_data,
int voltage)
{
struct ldo_regulator *ldo;
ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL);
if (!ldo) {
dev_err(codec->dev, "failed to allocate ldo_regulator\n");
return -ENOMEM;
}
ldo->desc.name = kstrdup(dev_name(codec->dev), GFP_KERNEL);
if (!ldo->desc.name) {
kfree(ldo);
dev_err(codec->dev, "failed to allocate decs name memory\n");
return -ENOMEM;
}
ldo->desc.type = REGULATOR_VOLTAGE;
ldo->desc.owner = THIS_MODULE;
ldo->desc.ops = &ldo_regulator_ops;
ldo->desc.n_voltages = 1;
ldo->codec_data = codec;
ldo->voltage = voltage;
ldo->dev = regulator_register(&ldo->desc, codec->dev,
init_data, ldo);
if (IS_ERR(ldo->dev)) {
int ret = PTR_ERR(ldo->dev);
dev_err(codec->dev, "failed to register regulator\n");
kfree(ldo->desc.name);
kfree(ldo);
return ret;
}
return 0;
}
static int ldo_regulator_remove(struct snd_soc_codec *codec)
{
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
struct ldo_regulator *ldo = sgtl5000->ldo;
if (!ldo)
return 0;
regulator_unregister(ldo->dev);
kfree(ldo->desc.name);
kfree(ldo);
return 0;
}
#else
static int ldo_regulator_register(struct snd_soc_codec *codec,
struct regulator_init_data *init_data,
int voltage)
{
return -EINVAL;
}
static int ldo_regulator_remove(struct snd_soc_codec *codec)
{
return 0;
}
#endif
/*
* set dac bias
* common state changes:
* startup:
* off --> standby --> prepare --> on
* standby --> prepare --> on
*
* stop:
* on --> prepare --> standby
*/
static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
int ret;
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
ret = regulator_bulk_enable(
ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
if (ret)
return ret;
udelay(10);
}
break;
case SND_SOC_BIAS_OFF:
regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
break;
}
codec->dapm.bias_level = level;
return 0;
}
#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE |\
SNDRV_PCM_FMTBIT_S32_LE)
static struct snd_soc_dai_ops sgtl5000_ops = {
.hw_params = sgtl5000_pcm_hw_params,
.digital_mute = sgtl5000_digital_mute,
.set_fmt = sgtl5000_set_dai_fmt,
.set_sysclk = sgtl5000_set_dai_sysclk,
};
static struct snd_soc_dai_driver sgtl5000_dai = {
.name = "sgtl5000",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 2,
/*
* only support 8~48K + 96K,
* TODO modify hw_param to support more
*/
.rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
.formats = SGTL5000_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
.formats = SGTL5000_FORMATS,
},
.ops = &sgtl5000_ops,
.symmetric_rates = 1,
};
static int sgtl5000_volatile_register(struct snd_soc_codec *codec,
unsigned int reg)
{
switch (reg) {
case SGTL5000_CHIP_ID:
case SGTL5000_CHIP_ADCDAC_CTRL:
case SGTL5000_CHIP_ANA_STATUS:
return 1;
}
return 0;
}
#ifdef CONFIG_SUSPEND
static int sgtl5000_suspend(struct snd_soc_codec *codec, pm_message_t state)
{
sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
/*
* restore all sgtl5000 registers,
* since a big hole between dap and regular registers,
* we will restore them respectively.
*/
static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
{
u16 *cache = codec->reg_cache;
int i;
int regular_regs = SGTL5000_CHIP_SHORT_CTRL >> 1;
/* restore regular registers */
for (i = 0; i < regular_regs; i++) {
int reg = i << 1;
/* this regs depends on the others */
if (reg == SGTL5000_CHIP_ANA_POWER ||
reg == SGTL5000_CHIP_CLK_CTRL ||
reg == SGTL5000_CHIP_LINREG_CTRL ||
reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
reg == SGTL5000_CHIP_CLK_CTRL)
continue;
snd_soc_write(codec, reg, cache[i]);
}
/* restore dap registers */
for (i = SGTL5000_DAP_REG_OFFSET >> 1;
i < SGTL5000_MAX_REG_OFFSET >> 1; i++) {
int reg = i << 1;
snd_soc_write(codec, reg, cache[i]);
}
/*
* restore power and other regs according
* to set_power() and set_clock()
*/
snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
cache[SGTL5000_CHIP_LINREG_CTRL >> 1]);
snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER,
cache[SGTL5000_CHIP_ANA_POWER >> 1]);
snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL,
cache[SGTL5000_CHIP_CLK_CTRL >> 1]);
snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL,
cache[SGTL5000_CHIP_REF_CTRL >> 1]);
snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
cache[SGTL5000_CHIP_LINE_OUT_CTRL >> 1]);
return 0;
}
static int sgtl5000_resume(struct snd_soc_codec *codec)
{
/* Bring the codec back up to standby to enable regulators */
sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Restore registers by cached in memory */
sgtl5000_restore_regs(codec);
return 0;
}
#else
#define sgtl5000_suspend NULL
#define sgtl5000_resume NULL
#endif /* CONFIG_SUSPEND */
/*
* sgtl5000 has 3 internal power supplies:
* 1. VAG, normally set to vdda/2
* 2. chargepump, set to different value
* according to voltage of vdda and vddio
* 3. line out VAG, normally set to vddio/2
*
* and should be set according to:
* 1. vddd provided by external or not
* 2. vdda and vddio voltage value. > 3.1v or not
* 3. chip revision >=0x11 or not. If >=0x11, not use external vddd.
*/
static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
{
int vddd;
int vdda;
int vddio;
u16 ana_pwr;
u16 lreg_ctrl;
int vag;
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer);
vddd = regulator_get_voltage(sgtl5000->supplies[VDDD].consumer);
vdda = vdda / 1000;
vddio = vddio / 1000;
vddd = vddd / 1000;
if (vdda <= 0 || vddio <= 0 || vddd < 0) {
dev_err(codec->dev, "regulator voltage not set correctly\n");
return -EINVAL;
}
/* according to datasheet, maximum voltage of supplies */
if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
dev_err(codec->dev,
"exceed max voltage vdda %dmv vddio %dma vddd %dma\n",
vdda, vddio, vddd);
return -EINVAL;
}
/* reset value */
ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER);
ana_pwr |= SGTL5000_DAC_STEREO |
SGTL5000_ADC_STEREO |
SGTL5000_REFTOP_POWERUP;
lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL);
if (vddio < 3100 && vdda < 3100) {
/* enable internal oscillator used for charge pump */
snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL,
SGTL5000_INT_OSC_EN,
SGTL5000_INT_OSC_EN);
/* Enable VDDC charge pump */
ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
} else if (vddio >= 3100 && vdda >= 3100) {
/*
* if vddio and vddd > 3.1v,
* charge pump should be clean before set ana_pwr
*/
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_VDDC_CHRGPMP_POWERUP, 0);
/* VDDC use VDDIO rail */
lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
SGTL5000_VDDC_MAN_ASSN_SHIFT;
}
snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr);
/* set voltage to register */
snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
(0x1 << 4) - 1, 0x8);
/*
* if vddd linear reg has been enabled,
* simple digital supply should be clear to get
* proper VDDD voltage.
*/
if (ana_pwr & SGTL5000_LINEREG_D_POWERUP)
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_LINREG_SIMPLE_POWERUP,
0);
else
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_LINREG_SIMPLE_POWERUP |
SGTL5000_STARTUP_POWERUP,
0);
/*
* set ADC/DAC VAG to vdda / 2,
* should stay in range (0.8v, 1.575v)
*/
vag = vdda / 2;
if (vag <= SGTL5000_ANA_GND_BASE)
vag = 0;
else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP *
(SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT))
vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT;
else
vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
vag << SGTL5000_ANA_GND_SHIFT,
vag << SGTL5000_ANA_GND_SHIFT);
/* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
vag = vddio / 2;
if (vag <= SGTL5000_LINE_OUT_GND_BASE)
vag = 0;
else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
vag = SGTL5000_LINE_OUT_GND_MAX;
else
vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
SGTL5000_LINE_OUT_GND_STP;
snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
vag << SGTL5000_LINE_OUT_GND_SHIFT |
SGTL5000_LINE_OUT_CURRENT_360u <<
SGTL5000_LINE_OUT_CURRENT_SHIFT,
vag << SGTL5000_LINE_OUT_GND_SHIFT |
SGTL5000_LINE_OUT_CURRENT_360u <<
SGTL5000_LINE_OUT_CURRENT_SHIFT);
return 0;
}
static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
{
u16 reg;
int ret;
int rev;
int i;
int external_vddd = 0;
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++)
sgtl5000->supplies[i].supply = supply_names[i];
ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
if (!ret)
external_vddd = 1;
else {
/* set internal ldo to 1.2v */
int voltage = LDO_VOLTAGE;
ret = ldo_regulator_register(codec, &ldo_init_data, voltage);
if (ret) {
dev_err(codec->dev,
"Failed to register vddd internal supplies: %d\n",
ret);
return ret;
}
sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
ret = regulator_bulk_get(codec->dev,
ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
if (ret) {
ldo_regulator_remove(codec);
dev_err(codec->dev,
"Failed to request supplies: %d\n", ret);
return ret;
}
}
ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
if (ret)
goto err_regulator_free;
/* wait for all power rails bring up */
udelay(10);
/* read chip information */
reg = snd_soc_read(codec, SGTL5000_CHIP_ID);
if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
SGTL5000_PARTID_PART_ID) {
dev_err(codec->dev,
"Device with ID register %x is not a sgtl5000\n", reg);
ret = -ENODEV;
goto err_regulator_disable;
}
rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
dev_info(codec->dev, "sgtl5000 revision %d\n", rev);
/*
* workaround for revision 0x11 and later,
* roll back to use internal LDO
*/
if (external_vddd && rev >= 0x11) {
int voltage = LDO_VOLTAGE;
/* disable all regulator first */
regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
/* free VDDD regulator */
regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
ret = ldo_regulator_register(codec, &ldo_init_data, voltage);
if (ret)
return ret;
sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
ret = regulator_bulk_get(codec->dev,
ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
if (ret) {
ldo_regulator_remove(codec);
dev_err(codec->dev,
"Failed to request supplies: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
if (ret)
goto err_regulator_free;
/* wait for all power rails bring up */
udelay(10);
}
return 0;
err_regulator_disable:
regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
err_regulator_free:
regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
if (external_vddd)
ldo_regulator_remove(codec);
return ret;
}
static int sgtl5000_probe(struct snd_soc_codec *codec)
{
int ret;
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
/* setup i2c data ops */
ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C);
if (ret < 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
return ret;
}
ret = sgtl5000_enable_regulators(codec);
if (ret)
return ret;
/* power up sgtl5000 */
ret = sgtl5000_set_power_regs(codec);
if (ret)
goto err;
/* enable small pop, introduce 400ms delay in turning off */
snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
SGTL5000_SMALL_POP,
SGTL5000_SMALL_POP);
/* disable short cut detector */
snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
/*
* set i2s as default input of sound switch
* TODO: add sound switch to control and dapm widge.
*/
snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL,
SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT);
snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER,
SGTL5000_ADC_EN | SGTL5000_DAC_EN);
/* enable dac volume ramp by default */
snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL,
SGTL5000_DAC_VOL_RAMP_EN |
SGTL5000_DAC_MUTE_RIGHT |
SGTL5000_DAC_MUTE_LEFT);
snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f);
snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
SGTL5000_HP_ZCD_EN |
SGTL5000_ADC_ZCD_EN);
snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 0);
/*
* disable DAP
* TODO:
* Enable DAP in kcontrol and dapm.
*/
snd_soc_write(codec, SGTL5000_DAP_CTRL, 0);
/* leading to standby state */
ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
if (ret)
goto err;
snd_soc_add_controls(codec, sgtl5000_snd_controls,
ARRAY_SIZE(sgtl5000_snd_controls));
snd_soc_dapm_new_controls(&codec->dapm, sgtl5000_dapm_widgets,
ARRAY_SIZE(sgtl5000_dapm_widgets));
snd_soc_dapm_add_routes(&codec->dapm, audio_map,
ARRAY_SIZE(audio_map));
snd_soc_dapm_new_widgets(&codec->dapm);
return 0;
err:
regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
ldo_regulator_remove(codec);
return ret;
}
static int sgtl5000_remove(struct snd_soc_codec *codec)
{
struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
sgtl5000->supplies);
ldo_regulator_remove(codec);
return 0;
}
static struct snd_soc_codec_driver sgtl5000_driver = {
.probe = sgtl5000_probe,
.remove = sgtl5000_remove,
.suspend = sgtl5000_suspend,
.resume = sgtl5000_resume,
.set_bias_level = sgtl5000_set_bias_level,
.reg_cache_size = ARRAY_SIZE(sgtl5000_regs),
.reg_word_size = sizeof(u16),
.reg_cache_step = 2,
.reg_cache_default = sgtl5000_regs,
.volatile_register = sgtl5000_volatile_register,
};
static __devinit int sgtl5000_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct sgtl5000_priv *sgtl5000;
int ret;
sgtl5000 = kzalloc(sizeof(struct sgtl5000_priv), GFP_KERNEL);
if (!sgtl5000)
return -ENOMEM;
/*
* copy DAP default values to default value array.
* sgtl5000 register space has a big hole, merge it
* at init phase makes life easy.
* FIXME: should we drop 'const' of sgtl5000_regs?
*/
memcpy((void *)(&sgtl5000_regs[0] + (SGTL5000_DAP_REG_OFFSET >> 1)),
sgtl5000_dap_regs,
SGTL5000_MAX_REG_OFFSET - SGTL5000_DAP_REG_OFFSET);
i2c_set_clientdata(client, sgtl5000);
ret = snd_soc_register_codec(&client->dev,
&sgtl5000_driver, &sgtl5000_dai, 1);
if (ret) {
dev_err(&client->dev, "Failed to register codec: %d\n", ret);
kfree(sgtl5000);
return ret;
}
return 0;
}
static __devexit int sgtl5000_i2c_remove(struct i2c_client *client)
{
struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
snd_soc_unregister_codec(&client->dev);
kfree(sgtl5000);
return 0;
}
static const struct i2c_device_id sgtl5000_id[] = {
{"sgtl5000", 0},
{},
};
MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
static struct i2c_driver sgtl5000_i2c_driver = {
.driver = {
.name = "sgtl5000",
.owner = THIS_MODULE,
},
.probe = sgtl5000_i2c_probe,
.remove = __devexit_p(sgtl5000_i2c_remove),
.id_table = sgtl5000_id,
};
static int __init sgtl5000_modinit(void)
{
return i2c_add_driver(&sgtl5000_i2c_driver);
}
module_init(sgtl5000_modinit);
static void __exit sgtl5000_exit(void)
{
i2c_del_driver(&sgtl5000_i2c_driver);
}
module_exit(sgtl5000_exit);
MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver");
MODULE_AUTHOR("Zeng Zhaoming <zhaoming.zeng@freescale.com>");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink