mirror of https://gitee.com/openkylin/linux.git
81 lines
2.8 KiB
Plaintext
81 lines
2.8 KiB
Plaintext
* Cadence SD/SDIO/eMMC Host Controller
|
|
|
|
Required properties:
|
|
- compatible: should be one of the following:
|
|
"cdns,sd4hc" - default of the IP
|
|
"socionext,uniphier-sd4hc" - for Socionext UniPhier SoCs
|
|
- reg: offset and length of the register set for the device.
|
|
- interrupts: a single interrupt specifier.
|
|
- clocks: phandle to the input clock.
|
|
|
|
Optional properties:
|
|
For eMMC configuration, supported speed modes are not indicated by the SDHCI
|
|
Capabilities Register. Instead, the following properties should be specified
|
|
if supported. See mmc.txt for details.
|
|
- mmc-ddr-1_8v
|
|
- mmc-ddr-1_2v
|
|
- mmc-hs200-1_8v
|
|
- mmc-hs200-1_2v
|
|
- mmc-hs400-1_8v
|
|
- mmc-hs400-1_2v
|
|
|
|
Some PHY delays can be configured by following properties.
|
|
PHY DLL input delays:
|
|
They are used to delay the data valid window, and align the window
|
|
to sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
|
|
and it is increased by 2.5ns in each step.
|
|
- cdns,phy-input-delay-sd-highspeed:
|
|
Value of the delay in the input path for SD high-speed timing
|
|
Valid range = [0:0x1F].
|
|
- cdns,phy-input-delay-legacy:
|
|
Value of the delay in the input path for legacy timing
|
|
Valid range = [0:0x1F].
|
|
- cdns,phy-input-delay-sd-uhs-sdr12:
|
|
Value of the delay in the input path for SD UHS SDR12 timing
|
|
Valid range = [0:0x1F].
|
|
- cdns,phy-input-delay-sd-uhs-sdr25:
|
|
Value of the delay in the input path for SD UHS SDR25 timing
|
|
Valid range = [0:0x1F].
|
|
- cdns,phy-input-delay-sd-uhs-sdr50:
|
|
Value of the delay in the input path for SD UHS SDR50 timing
|
|
Valid range = [0:0x1F].
|
|
- cdns,phy-input-delay-sd-uhs-ddr50:
|
|
Value of the delay in the input path for SD UHS DDR50 timing
|
|
Valid range = [0:0x1F].
|
|
- cdns,phy-input-delay-mmc-highspeed:
|
|
Value of the delay in the input path for MMC high-speed timing
|
|
Valid range = [0:0x1F].
|
|
- cdns,phy-input-delay-mmc-ddr:
|
|
Value of the delay in the input path for eMMC high-speed DDR timing
|
|
Valid range = [0:0x1F].
|
|
|
|
PHY DLL clock delays:
|
|
Each delay property represents the fraction of the clock period.
|
|
The approximate delay value will be
|
|
(<delay property value>/128)*sdmclk_clock_period.
|
|
- cdns,phy-dll-delay-sdclk:
|
|
Value of the delay introduced on the sdclk output
|
|
for all modes except HS200, HS400 and HS400_ES.
|
|
Valid range = [0:0x7F].
|
|
- cdns,phy-dll-delay-sdclk-hsmmc:
|
|
Value of the delay introduced on the sdclk output
|
|
for HS200, HS400 and HS400_ES speed modes.
|
|
Valid range = [0:0x7F].
|
|
- cdns,phy-dll-delay-strobe:
|
|
Value of the delay introduced on the dat_strobe input
|
|
used in HS400 / HS400_ES speed modes.
|
|
Valid range = [0:0x7F].
|
|
|
|
Example:
|
|
emmc: sdhci@5a000000 {
|
|
compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
|
|
reg = <0x5a000000 0x400>;
|
|
interrupts = <0 78 4>;
|
|
clocks = <&clk 4>;
|
|
bus-width = <8>;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
cdns,phy-dll-delay-sdclk = <0>;
|
|
};
|