mirror of https://gitee.com/openkylin/linux.git
46 lines
2.2 KiB
Plaintext
46 lines
2.2 KiB
Plaintext
* Toshiba Mobile IO SD/MMC controller
|
|
|
|
The tmio-mmc driver doesn't probe its devices actively, instead its binding to
|
|
devices is managed by either MFD drivers or by the sh_mobile_sdhi platform
|
|
driver. Those drivers supply the tmio-mmc driver with platform data, that either
|
|
describe hardware capabilities, known to them, or are obtained by them from
|
|
their own platform data or from their DT information. In the latter case all
|
|
compulsory and any optional properties, common to all SD/MMC drivers, as
|
|
described in mmc.txt, can be used. Additionally the following tmio_mmc-specific
|
|
optional bindings can be used.
|
|
|
|
Required properties:
|
|
- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit
|
|
"renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC
|
|
"renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC
|
|
"renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC
|
|
"renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC
|
|
"renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC
|
|
"renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC
|
|
"renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC
|
|
"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
|
|
"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
|
|
"renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC
|
|
"renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC
|
|
"renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC
|
|
"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
|
|
"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
|
|
"renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC
|
|
|
|
- clocks: Most controllers only have 1 clock source per channel. However, on
|
|
some variations of this controller, the internal card detection
|
|
logic that exists in this controller is sectioned off to be run by a
|
|
separate second clock source to allow the main core clock to be turned
|
|
off to save power.
|
|
If 2 clocks are specified by the hardware, you must name them as
|
|
"core" and "cd". If the controller only has 1 clock, naming is not
|
|
required.
|
|
Devices which have more than 1 clock are listed below:
|
|
2: R7S72100
|
|
|
|
Optional properties:
|
|
- toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
|
|
- pinctrl-names: should be "default", "state_uhs"
|
|
- pinctrl-0: should contain default/high speed pin ctrl
|
|
- pinctrl-1: should contain uhs mode pin ctrl
|